TP-Link TL-MCRP100 Installation Guide

Installation Guide

100-240V Redundant Power Supply Module

TL-MCRP100

Panel Layout

Front Panel Rear Panel

Power LED

FAN LED

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code

7106508299 REV2.0.0

TL-MCRP100

FAN

100-240V~ 50/60Hz 2.5A

AC Power Plug

LED Explanation

Power

On: Power on

O:

Power o

FAN

On: The fans are working properly.

O:

The fans are working abnormally.

Installation Power On

Remove the protective cover on the power supply module slot of TL-MC1400.
Then gently push in the module and plug it solidly into the connector.

Plug the negative connector of the AC power cord into the power socket of
TL-MCRP100, and the positive connector into a power outlet as the following

gure shows. After TL-MCRP100 is powered on normally, the Power LED and

FAN LED indicators on its front panel will keep on.

Interface

Chassis

Note: TL-MCRP100 v2.0 supports TL-MC1400 v3.0, while TL-MCRP100 v1.0 supports TL-MC1400 v1.0/2.0.