Page 1
Quick Installation Guide
AC1200 Wireless Dual Band Gigabit Router
Connect the Hardware
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router’s Internet port, and then follow Step 4 and 5 to
complete the hardware connection.
Internet
Power adapter
Modem
Power adapter
Turn off the modem, and remove
1
the backup battery if it has one.
Connect the modem to the Internet
2
port on your router with an Ethernet cable.
Router
Turn on the router.
4
Turn on the modem, and then
3
wait about 2 minutes for it to restart.
Verify that the following LEDs are on
5
and solid before continuing with the
configuration.
Power
On
Note: If the 2.4G LED and 5G LED are off, please
press the WPS/Wi-Fi On/Off button for 2 seconds and
check the LEDs again in a few seconds later.
2.4G
On
5G
On
Internet
On
For optimum performance,
orient the antennas as
shown in the drawing.
Page 2
Configure via Web Browser
Connections are available
Wireless Network Connection
1.
Connect your computer to the router (Wired or Wireless)
Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
Ethernet cable
Wireless
a. Find the SSID (Network Name) and Wireless Password printed on the label at the
bottom of the router.
b. Click the network icon of your computer or go to Wi-Fi Setting of your smart
device, and then select the SSID to join the network.
Computer Smart Device
TP-LINK_XXXX
TP-LINK_XXXX_5G
√
Connect automatically Connect
or
< Settings
Wi-Fi
CHOOSE A NETWORK...
TP-LINK_XXXX
TP-LINK_XXXX_5G
Other...
Wi-Fi
B Create a new username and password and click Confirm. Then follow the
step-by-step instructions of the Quick Setup to complete the initial configuration.
Internet Connection Type
Time Zone
Note: If you are not sure of the Internet Connection Type, please click Auto Detect.
Moreover, the TP-LINK router is equipped with various features, such as Guest Network, Parental
Controls, Access Control, etc. For details, please refer to the User Manual at www.tp-link.com.
Wireless Settings
Summary
Test Internet Connection
Tether App
TP-LINK Tether app provides a simple, intuitive way to access and manage your router.
You can block unwelcome devices, set up Parental Controls, configure your wireless
settings and more.
Scan the QR code to download the TP-LINK Tether
app from the Apple App Store or Google Play.
FAQ (Frequently Asked Questions)
What can I do if the login window does not appear?
Q1.
If the computer is set to a static or fixed IP address, change the setting to
obtain an IP address automatically.
Verify that http://tplinkwifi.net or http://192.168.0.1 is correctly entered in
the web browser. Alternatively, enter http://192.168.1.1 in the web browser.
Use another web browser and try again.
Reboot your router and try again.
Disable and enable the the network adapter in use again.
What can I do if I cannot access the Internet?
Q2.
Check if the Internet is working properly by connecting a computer directly
to the modem via an Ethernet cable. If it is not, contact your Internet Service
Provider.
Log into the Web Management page of the router, and go to the Basic > Network
Map page to check whether the IP address is valid or not. If it is, please run the
Quick Setup again; otherwise, recheck the hardware connection.
Reboot your router and try again.
For cable modem users, reboot the modem first. If the problem still exists,
log into the web management page of the router, go to Advanced >
Network > Internet > MAC Clone, click Use Current Computer MAC
Address and then click Save.
Q3. How do I restore the router to its factory default settings?
With the router powered on, press and hold the Reset button on the back
until the LED blinks.
Log into the web management page of the router, go to Advanced > System
Tools > Backup & Restore > Factory Default Restore, and click Factory
Restore. The router will restore and reboot automatically.
What can I do if I forgot my Web Management password?
Q4.
Refer to FAQ > Q3 to reset the router, and then use the default admin (all
lowercase) for both username and password to log in.
2.
Configure the router using a web browser
A Enter http://tplinkwifi.net or http://192.168.0.1 in the address bar of a web
browser. Use admin for both username and password, and then click Login.
Note: If the login window does not appear, please refer to FAQ > Q1.
http://tplinkwifi.net
admin
admin
Login
©2016 TP-LINK 7106506343 REV1.0.0
USB Features
Use the USB port for media sharing, storage sharing and printer sharing across your
local network. You can also set up an FTP server to access your files remotely through
the Internet.
USB sharing port
Remote Access
via FTP Server
To learn more about the USB features, please visit
http://www.tp-link.com/app/usb/, or simply scan the QR code.
Media Sharing
Local Storage
Sharing
Printer Sharing
Q5.
What can I do if I forgot my wireless network password?
If you have not changed the default Wireless Password, it can be found on the
label of the router.
Connect a computer directly to the router using an Ethernet cable. L
Web Management page, and go to Basic > Wireless to retrieve or reset your
wireless password.
If your questions are not listed here, please refer to the support page at
www.tp-link.com.
og into the
Loading...