TP-Link KL430E, KL430 Installation Guide
Let’s get started with your new Smart Light Strip.
ST EP 1
DOWNLOAD KASA
Get the Kasa Smart app from the
Apple App Store or Google Play.
ST EP 2
ADD TO KASA
Tap the button in the Kasa
app and select Smart Lights >
Smart Light Strip (Extension)
.
ST EP 3
INSTALL & POWER UP
Simply follow the instructions in the
Kasa app to complete your Smart
Light Strip setup.
Smart Light Strip www.tp-lin k.com
?
Need some help?
Visit www.tp-link.com/support
for User Guides, FAQs, Warranty & more
CAUTION: To reduce the risk of re, electric shock, or injury to persons:
• Use only insulated staples or plastic ties to secure cords;
• Not intended for recessed installation in ceilings, or sots;
• Do not use the device where wireless devices are not allowed;
• Keep the device away from water, re, wet or hot environments;
• Do not install in a compartment smaller than 43 inches by 12 inches by 12 inches;
• The maximum distance to the receptacle is determined by the length of adapter cord;
• Only use the control provided with or specied by these instructions to control this device;
•
Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall;
•
Position the portable cabinet light with respect to the cabinet so the lamp replacement markings are
able to be read during replacing;
• The National Electrical Code (NEC) does not permit cords to be concealed where damage to insulation
may go unnoticed. To prevent re danger, do not run cord behind walls, ceilings, sots, or cabinets
where it may be inaccessible for examination. Cords should be visually examined periodically and
immediately replaced when any damage is noted.
Please read and follow the above safety information when operating the device. We cannot guarantee
that no accidents or damage will occur due to improper use of the device. Please use this product with
care and operate at your own risk.
7106508428 REV1.0.0 © 2019 TP-Link
Loading...