User Guide
Kasa Smart Wi-Fi Power Strip, 6-Outlets
HS300
1910012446 REV1.0.0
Contents
About This Guide ···················································· 1
Introduction ······························································· 2
Appearance ······························································· 3
Set Up Your Smart Power Strip ······················· 4
Main Device Controls ··········································· 5
Congure Your Smart Power Strip ················ 6
Create Scenes·························································· 8
Discover Kasa ··························································· 9
Authentication ························································10
About This Guide
This guide provides a brief introduction to Kasa Smart Wi-Fi Power Strip and the Kasa app, as well as regulatory information.
Please note that features of Kasa Smart Wi-Fi Power Strip may vary slightly depending on the model and software version you have, and on your
location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Conventions
In this guide, the following convention is used:
Convention Description
Teal
Underline
Key information appears in teal, including management page text such as menus, items, buttons and so on.
Hyperlinks are in teal and underlined. You can click to redirect to a website.
More Info
• Specications can be found on the product page at https://www.tp-link.com
• Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support.
.
1
Introduction
With independent control of 6 smart outlets and always-on USB ports to charge 3 others, the Kasa Smart Wi-Fi Power Strip is ideal for family rooms,
home oces and small businesses. Download the Kasa app and control your outlets remotely. The Kasa app provides easy step-by-step installation
instructions and convenient remote control from anywhere.
Surge ProtectionNo Hub RequiredControl from AnywhereIndividual Control
• 6 Smart Outlets - Independently control 6 smart outlets from your smartphone with the Kasa Smart app.
• Surge Protection - ETL certied surge protection shields electronics from power surges and overloading.
• 3 USB Ports - Charge your tablet, smartphone, or other devices using the always-on USB ports.
• Energy Monitoring - Monitor energy consumption of devices plugged into your smart power strip.
• No Hub Required - Connect to your existing Wi-Fi router.
• Scheduling - Set a schedule to automatically turn devices on and o.
• Voice Control - Use Alexa, Google Assistant, or Microsoft Cortana to control your devices with voice commands.
• Works with IFTTT - Have your smart power strip work together with other devices through support from IFTTT.
Energy Monitoring Scheduling
Supported Load Types:
Coee Maker: 800 W Heater: 1500 W Toaster: 850 W
Desk Lamp: 235.2 W Humidier: 260 W Tower Fan: 50 W
LCD: 270 W Iron: 1500 W
2
Appearance
Smart Power Strip has 6 individual smart outlets, with control buttons to turn on/o devices plugged in and LEDs to show you the current status. SYS,
Grounded and Protected LEDs change color according to its status. See the explanation below:
6 5
1
4
SYS Wi-Fi LED
Orange
Rebooting.
Blinking Orange and Green
Setup mode initiated.
Blinking Green
Searching for Wi-Fi.
White
Connected to Wi-Fi network successfully.
Blinking Orange
Resetting.
Red
No Wi-Fi connection.
Grounded LED
2
Lit up when it is grounded normally.
Protected LED
3
Lit up when it is under surge protection.
Smart Outlet (1-6 from left to right)
4
Plug in your device and control it from your smartphone.
Each outlet is independent.
LED of Smart Outlet (1-6 from left to right)
5
Lit up when the corresponding smart outlet is on.
Control Button (1-6 from left to right)
6
Press the control button to turn on or o the corresponding outlet.
Press and hold a control button for 5s to reenable setup mode.
Press and hold a control button for 10s to restore your Smart Power
Strip to factory default settings.
USB Port
7
Charge your tablet, smartphone or other devices.
Output: 5V/2.4A each; 5V/4A total
237
1
Back Panel
Main Switch
8
Turn on or o your Smart Power Strip.
8
3
Set Up Your Smart Power Strip
Follow the steps below to set up your Smart Power Strip via Kasa Smart app.
1. Download and install Kasa app
Go to Google Play or the Apple App Store
or scan the QR code below to download the
Kasa app on your Android or iOS smartphone
or tablet.
2. Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in.
If you don’t have a TP-Link ID, tap Create
Account and the Kasa app will guide you
through the rest.
3. Add Device
Tap the + button in the Kasa app, select Smart
Power Strip and then follow step-by-step app
instructions to complete the setup.
4
Loading...