This guide provides a brief introduction to Smart Dimmer and the Kasa app, as well as regulatory information.
Please note that features of Smart Dimmer may vary slightly depending on the model and software version you have, and on your location, language
and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Conventions
In this guide, the following convention is used:
Convention Description
Teal
Underline
Key information appears in teal, including management page text such as menus, items, buttons and so on.
Hyperlinks are in teal and underlined. You can click to redirect to a website.
More Info
• Specications can be found on the product page at http://www.tp-link.com
• Our Technical Support and troubleshooting information can be found at http://www.tp-link.com/support.
.
1
Introduction
With the Smart Wi-Fi Dimmer, you can control the ambiance of any space with the push of a button. Download the Kasa app and control your dimmer
remotely. The Kasa app provides easy step-by-step installation instructions and convenient remote control from anywhere.
• Brightness Control - Control the brightness of your lights to set the perfect ambiance for any activity
• Control Your Lights From Anywhere - Control your dimmer from wherever you are with the free Kasa app
• Hands-free Experience - Control your lights by voice commands through support from Amazon Alexa, Google Assistant and Microsoft Cortana
• Works with Nest - Automatically control devices when Nest detects that you're home and away
• Works with IFTTT - Get your smart dimmer work together with other devices through support from IFTTT
• Scheduling - Program lights to turn o and on at set times throughout the day or night
Phone not included;
Works with iOS and Android
2
Appearance
factory reset the Smart Dimmer.
Smart Dimmer has Up/Down buttons to adjust the brightness of your lights, an indicator that tell you the current brightness of your lights, two LEDs that
changes color according to its status, a RESTART button and a RESET button. See the explanation below:
Press to decrease the lighting brightness.
Press to increase the lighting brightness.
Indicate the current lighting brightness.
Blinking Amber and Green
App-Cong mode initiated.
Blinking Green
Searching for Wi-Fi.
Green
Lit up for about 30 seconds when connected to the Wi-Fi network, then turns o.
Blinking Amber
Resetting.
Red
No Wi-Fi connection.
White
Lit up when the light is switched OFF to show the Smart Dimmer location in the dark.
RESTART
RESET
Press to reboot the Smart Dimmer.
Press and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green
alternately to initiate App-Cong mode.
Press and hold (about 10 seconds) until the Wi-Fi status LED blinks amber rapidly to
3
Set Up Your Smart Dimmer
Follow the steps below to set up your Smart Dimmer via Kasa for Mobile app.
1. Download and install Kasa app
Go to Google Play or the Apple App Store
or scan the QR code below to download the
Kasa app on your Android or iOS smartphone
or tablet.
2. Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in.
If you don’t have a TP-Link ID, tap Create
Account and the Kasa app will guide you
through the rest.
4. Wire your Smart Dimmer
Follow the Kasa app instructions to wire your
Smart Dimmer. Then install and secure your
dimmer after the wiring.
4
Set Up Your Smart Dimmer
Follow the steps below to set up your Smart Dimmer via Kasa for Mobile app.
4. Connect to your home network
Enter your Wi-Fi password and add your
dimmer to your home Wi-Fi network.
5. Set dimmer range
Find the minimum level that your bulbs light up
and do the dimming test to ensure your bulbs
are compatible with dimming.
6. Complete and enjoy
Your Smart Dimmer is all set up and saved in
your device list. You can now enjoy using it
.
5
Main Device Controls
After you successfully set up your Smart Dimmer, you will see the home page of the Kasa app. Here you can view the status of all devices that you've
added to Kasa and manage them. Tap on a smart dimmer to check the current brightness of your dimmer
.
Home Page
Device Status
6
Congure Your Smart Dimmer
On Device Status page, you can add Presets, create Schedule, set Timer and change the settings of your dimmer.
Add Presets
Tap to add and edit brightness presets to
your smart dimmer.
Create Schedule
Tap to create a schedule for your smart
dimmer to simplify your daily routine by
creating automatic On/O action.
7
Congure Your Smart Dimmer
On Device Status page, you can add Presets, create Schedule, set Timer and change the settings of your dimmer.
Set Timer
Tap to set the time to turn your smart
dimmer on or o after specic times.
Device Settings
Tap to view and change the settings of your
smart dimmer. Moreover, you can set smart
conguration for easy control.
8
Create Scenes
A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your
smartphone or tablet, allowing you to easily set your mood, activity or t any special occasion. This page allows you to preset how your smart home
devices should act automatically at special occasions.
9
Discover Kasa
Use the Kasa app to pair your Smart Dimmer with Amazon Alexa, Google Home Assistant or Microsoft Cortana and enjoy a full hands-free experience
Kasa helps manage the rest of your smart home too, working with Nest to trigger changes when you arrive home or leave for the day. IFTTT support
makes it easy to set interactions between a whole host of products.
Launch the Kasa app and go to Add Device > WORKS WITH KASA > Nest Home and Away / Amazon Alexa / Google Assistant / IFTTT for detailed
instructions.
.
10
Authentication
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product
names are trademarks or registered trademarks of their respective holders.
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
12
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2018.3.22
13
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le
fonctionnement.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être
installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• Alert to service person
CAUTION
DOUBLE POLE / NEUTRAL FUSING
15
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to
improper use of the device. Please use this product with care and operate at your own risk.
Warnings
• Install only in a suitable UL Listed outlet box.
• CAUTION - Risk of Electric Shock - More than one disconnect switch may be required to de-energize the equipment before servicing.
• Tighten terminal screws to 13 lbf-in
• Supported specified line number for the thread terminal copper wire: 12AWG 14AWG and 16AWG.
• Supported Load Types:
120VAC 60Hz
300W Incandescent
150W LED
• Operating Temperature: 0 ºC-40 ºC (32°F-104°F)
• Operating Humidity: 5%-90%RH, Non-condensing
Explanation of the symbols on the product label
SymbolExplanation
Indoor use only
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to
European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
16
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.