TP-Link HS1 Series Quick Start Manual

Quick Start Guide

HS1XX Series

Smart Wi-Fi Plug Installation

Support

Create Account

Skip

Forgot password?

LOG IN

Password

Email

Log in to access your devices.

Welcome

home

Sketch 9:41 AM 100%

OR scan
QR code

1 Download TP-LINK Kasa from App Store or

Google Play.

2 Connect mobile device to your 2.4GHz Wi-Fi

network.

3 Launch Kasa and follow the in-app instructions

to connect the Smart Plug to your network.

Note: The Smart Plug only supports 2.4GHz networks.

If you encounter any issues during installation or
configuration, please visit www.tp-link.com/support for
web support and troubleshooting information.

7106506191 REV 1.0.0

Sketch 9:41 AM 100%

Power up your Smart Plug

Plug in your Smart Plug. The Wi-Fi

light will turn solid amber.

NEXT

Sketch

9:41 AM 100%

DONE

Great!

Your Smart Plug is all set up. It is

now saved in your Device List.

Smart Wi-Fi Plug

Troubleshooting

Press and hold (for 5 seconds) until the Wi-Fi
LED blinks amber and green alternately to
initiate the App-Config process.

Press and hold (for 10 seconds) until the Wi-Fi
LED blinks amber rapidly to factory reset the
Smart Plug.

Blinking Amber and Green: App-Config mode

initiated.

Quick Blinking Green: Connecting to the

network.

Solid Green: Connected to the network.
Quick Blinking Amber: Factory reset.
Solid Amber: Rebooting.
Solid Red: No network connection.

Solid Green: The Smart Plug is switched on.
Off: The Smart Plug is switched off.

1. What devices can I control with the Smart Plug?

You can control lights, fans, humidifiers, portable heaters, and
any small appliances in accordance with the Smart Plug’s
specifications.

2. What should I do when I can’t turn devices on or off?

• Make sure the devices connected to the Smart Plug are
turned on.

• Make sure your mobile device and the Smart Plug are
connected to the same network.

3. What should I do when the Wi-Fi LED is lit solid red?

A solid red indicates no network connection, or that the
App-Config process has failed. You can:

• Check your network connectivity.

• Check for Wi-Fi interference or relocate the Smart Plug to
another location within the signal range.

• Repeat the App-Config process.

• Factory reset the Smart Plug and try to add it again.

4. How do I pair the Smart Plugs with Amazon Echo?

Visit www.tp-link.com/en/faq-944.html for pairing instructions.

© 2016 TP-LINK. All rights reserved.