Quick Start Guide
Log in to access your devices.
HS105
Smart Wi-Fi Plug Mini Installation
1 Download TP-LINK Kasa from App Store or
Google Play.
OR scan
QR code
2 Connect mobile device to your 2.4GHz Wi-Fi
network.
Note: The Smart Plug Mini only supports 2.4GHz networks.
3 Launch Kasa and follow the in-app instructions
to connect the Smart Plug Mini to your network.
Sketch 9:41 AM 100%
Sketch 9:41 AM 100%
Power up your Smart Plug Mini
Plug in your Smart Plug Mini. If you
don’t see the LED light, press the
power button once.
Sketch 9:41 AM 100%
Great!
Your Smart Plug Mini is all set up.
It is now saved in your Device List.
NEXT
DONE
Support
If you encounter any issues during installation or
configuration, please visit www.tp-link.com/support for
web support and troubleshooting information.
7106506587 REV 1.0.0
Smart Wi-Fi Plug Mini
Press to turn the socket O N or OFF.
Press and hold (for 5 seconds) until the LED
flashes amber and blue alternately to initiate
the app onboarding process (SoftAP).
Press and hold (for 10 seconds) until the LED
flash es amber rapidly to factory reset the
Smart Plug Mini.
LED
Flashing amber and blue: App onboarding
process (SoftAP) initiated.
Flashing blue rapidly: Connec ting to the
network.
Solid blue: Connected to the networ k.
Flashing amber rapidly: Factory reset.
Solid amber: Rebooting or no ne twork
connection.
Off: The so cket is turned OFF or the Smar t
Plug Mini is powe red OFF.
Troubleshooting
1. What de vices c an I cont rol with the Smart Plug Mini?
You can control li ghts, fans, humidi fiers, por table heate rs, and
any small appliance s in accordance with the Smar t Plug Mini’s
specifications.
2. What sh ould I do when I ca n’t tur n devices on or of f using Kasa?
• Make sur e the dev ices connec ted to the Smar t Plug Mi ni are
switched to ON.
• Make sure the Remote Control feature i n the app i s enabled to
control your d evice s from outside of your ho me.
3. What sh ould I do when the LED is lit a solid amber ?
A solid amber light in dicates no net work connection . You can
troubleshoot the following:
• Check your ne twork connectiv ity.
• Avoid pla cing the Smar t Plug Mini near potential sources of
radio signal i nterferen ce such as microwave ovens, cordless
phones, baby monitors, and motor-driven appliances.
• Repeat the app onboarding process.
• Factor y reset the Smart Plug Mini a nd try to add it again.
4. How do I pair the Smart Plu g Mini with Amazon Echo?
Visit w ww.tp-link.com/en/faq -944.html for pairing instructions.
© 2016 TP-LINK. All rights reserved.