Appendix A. FAQs................................................................................................................................................................... 5
Appendix B. Specifications ................................................................................................................................................. 6
1.2 Main Features .......................................................................................................................................................................................... 2
The Smart Plugs make it easy to manage your household electronic devices anywhere in the world with a tap of your
smartphone.
Schedule and Timer
Deter bad guys by setting your lights to turn on and off on a schedule so it seems like you’re home when you are actually
away. And the countdown timer gives you a peace of mind, which automatically switches off the running household
appliances as your settings.
Compatible with Amazon Echo
You can pair the Smart Plugs with Amazon Echo for voice control.
Compatible with Android, iOS
The free Kasa app lets you run them from any Android (4.1 and higher) or iOS (iOS 8 and higher) smartphone.
Energy Conservation (for HS110 only)
You can efficiently conserve energy and save money while using the Smart Plugs to control your space heaters and fans.
The Smart Plug tracks your device’s power consumption in real-time, and has weekly and monthly summaries.
1.2 Main Features
Control devices connected to the Smart Plug wherever you have Internet using the free Kasa app on your
smartphone.
Schedule the Smart Plug to automatically power electronics on and off as needed, like setting lights to come on at
dusk or turn off at sunrise.
Analyze a device’s real-time and historical power consumption. (for HS110 only)
Turns your devices on and off at different times to give the appearance that someone is home.
Amazon Echo (sold separately) lets you control devices connected to the Smart Plugs just using your voice.
Chapter 1. Introduction 2
Amber and Green: Smart-config mode initiated.
Green: Connected to the network.
On
Off
No power.
Settings Button
Wi-Fi LED
Power LED
* Image may differ from actual product
version as an example.
1.3 Panel Layout
Button Description
due to different regional power
specifications. Here we take the US
(Settings button)
LED Status Indication
(Wi-Fi LED)
(Power LED)
Press this button until the Wi-Fi LED blinks amber and green alternately (about 5
seconds) to initiate the smart-config process.
Press and hold until the Wi-Fi LED blinks amber quickly (about 10 seconds) to reset the
Smart Plug to factory defaults.
Blink
On
Green: Connecting to the network.
Amber: Factory reset.
Amber: Rebooting.
Red: No network connection.
The Smart Plug is powered on.
Chapter 1. Introduction 3
Note:
Chapter 2. Quick Start
1. Download TP-LINK Kasa app.
2. Connect mobile device to your Wi-Fi network.
The Smart Plug can only connect to 2.4GHz network.
3. Launch Kasa and follow the app instructions.
Chapter 2. Quick Start 4
1. What devices can I control with the Smart Plug?
2. What should I do when I can’t turn devices on or off?
3. What should I do when the Wi-Fi LED is lit solid red?
Technical Support
Appendix A. FAQs
You can control lights, fans, humidifiers, portable heaters, and any small appliances in accordance with the Smart
Plug’s specifications.
Make sure that the devices connected to the Smart Plug are turned on, and that the Smart Plug is connected to the
network.
A solid red indicates no network connection, or that the smart-config process has failed. You can:
Check for interference or relocate the Smart Plug to another location within the signal range.
Make sure that you connect the Smart Plug to the 2.4GHz network.
Repeat the smart-config process.
Factory reset the Smart Plug and try to add it again.
For technical support, advanced features, and usage tips for the Smart Plug, visit the support page at www.tp-link.com.
Appendix A. FAQs 5
Appendix B. Specifications
Network
Protocol: IEEE 802.11b/g/n
Wireless Type: 2.4GHz, 1T1R
System Requirements:
Certifications: RoHS, EAC, CE
Buttons: Power button, Settings button
Environment
Android 4.1 or higher,
iOS 8 or higher
General
Operating Temperature: 0°C~40°C (32°F~104°F)
Storage Temperature: -20°C~70°C (-4°F ~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Appendix B. Specifications 6
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a registered trademark of TP-LINK
TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective
holders.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s authority to operate the equipment.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device
and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The
antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna or transmitter.”
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user
may be required to take adequate measures.
This device meets the EU requirements (1999/5/EC Article 3.1a) on the limitation of exposure of the general public to
electromagnetic fields by way of health protection.
The device complies with RF specifications when the device used at 20 cm from your body.
Canadian Compliance Statement
Radiation Exposure Statement:
Déclaration d'exposition aux radiations:
Industry Canada Statement
Korea Warning Statements
NCC Notice
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:
1) This device may not cause interference, and
2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible
d’en compromettre le fonctionnement.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de
rayonnement et votre corps.