TP-Link Archer VR2800 User Manual

Phone Jack

Power Adapter

Quick Installation Guide

AC2800 Wireless MU-MIMO VDSL/ADSL

Modem Router

VR2800

Connect the Hardware

Phone Cable

LINE

DSL Splitter

PHONE

MODEM

Phone Cable

If you don’t need the phone service, just directly connect the modem router to the phone jack with the provided phone cable, then follow steps

Phone (Optional)

Method 1: Via TP-Link Tether App

4 and 5 to complete the hardware connection.

Modem Router

Attach the antennas.

Push in to turn on the modem router.

Method 2: Via Web Browser

Verify that the following LEDs turn

stable before continuing with the

conguration.

Power On DSL On

Note: The DSL LED takes about 1 to 2 minutes to stabilize.

Configure the Modem Router

1. Download the TP-Link Tether app.

Scan to download

2. Connect your smartphone to the router.

SSIDs (network names) and Wireless Password are printed on the Wi-Fi Info Card included in the package.

3. Connect the router to the internet.

Launch the Tether app. Select Archer VR2800.A

Device

Local Device

Archer VR2800

50-C7-BF-02-EA-DC

Create a login password.B

Follow the steps to connect to the internet.

4. Bind the router to your TP-Link ID.

With TP-Link ID and cloud services, you can conveniently manage your home network via

This device is not bound to any

TP-Link ID. Please bind for

remote management and more

functions.

ArcherC9

StatusDevices

the Tether app, no matter where you find yourself.

Bind NowLater

1. Connect your computer to the router.

Wired Connection

Ethernet Cable

Wireless Connection

SSIDs (network names) and Wireless Password are printed on the Wi-Fi Info Card included in the package.

2. Connect your router to the internet. Launch a web browser and type in http://tplinkmodem.net or

192.168.1.1.

Note: If the login page does not appear, please refer to FAQ > Q1.

http://tplinkmodem.net

Create a password and get started.

New Password

Conrm Password

Let’s Get Started

Follow the step-by-step instructions to set up an internet connection and

HighMiddleLow

Enjoy the Internet

Now you can enjoy your internet.

For technical support and more information, please visit

http://www.tp-link.com/support.

TP-Link Cloud Service

Features

LED Indicators

TP-Link Cloud service provides a better way to manage your cloud devices. For example:

Remote Management

Easily manage your home network when you are out and about via the Tether app on your smartphone or tablet.

Timely Upgrade Notifications

Keep informed of the latest rmware updates, ensuring

that your router stays at its best.

One for All

Manage multiple TP-Link Cloud devices, all from a single TP-Link ID.

You can set up and enjoy cloud functions via the Tether app or through the web management page at http://tplinkmodem.net.

To learn more about TP-Link Cloud service and other useful features supported by the modem router (including Guest Network, Parental Controls, Access Control and more), please refer to the User Guide at

www.tp-link.com.

Ethernet WAN Connection

Connect an Ethernet cable (RJ45) from your fiber or cable modem to the LAN4/WAN port of the modem router to use it as a wireless router. Refer to the User Guide for wireless router configuration.

3G/4G Connectivity

Connect a 3G/4G USB mobile broadband modem to the router’s USB port to get wireless internet access through 3G/4G mobile networks. The USB

dongle can be congured as the primary internet connection, or as a

backup to enhance network reliability. Refer to the User Guide for instructions.

USB Features

The USB port can be used for printer, le and media sharing, both locally

over your home network and remotely over the internet using the router's built-in FTP server capability.

USB Sharing Ports

Remote Access via FTP Server

To learn more about the USB features, visit http://tp-link.com/app/usb or scan the QR code.

Media Sharing

Local Storage Sharing

Printer Sharing

LED Status Indication

Power

DSL

Internet

Wireless

2.4GHz

Wireless 5GHz

LAN

USB

WPS

Note: You can turn the LEDs on or o by pressing the LED On/O button.

Flashing

O

On Flashing

O

White Orange

O

On Flashing

O

On/O

Slow Flashing

System initialization is complete. The system is initializing or the firmware is being upgraded. Do not disconnect or power off the modem router. Power is off.

DSL synchronization is complete. DSL synchronization is in progress. DSL synchronization failed.

Internet service is available. Internet connection is correct but internet service is unavailable. Internet connection is incorrect, DSL synchronization failed, or the modem router is operating in Bridge mode.

The 2.4GHz wireless radio band is enabled. The 2.4GHz wireless radio band is disabled.

The 5GHz wireless radio band is enabled. The 5GHz wireless radio band is disabled.

At least one LAN port is connected. No LAN port is connected.

The USB device is ready to use. A new USB device is being identified. No USB device is plugged into the USB port.

Turns On when a WPS synchronization is established and automatically turns Off about five minutes later. A wireless device is trying to connect to the network via WPS. This process may take up to 2 minutes.

FAQ (Frequently Asked Questions)

Q1. What should I do if I cannot access the web management page?

A1. If the computer is set to a static IP address, change its settings to obtain an IP address

automatically.

A2. Make sure http://tplinkmodem.net or http://192.168.1.1 is correctly entered in the web

browser. A3. Use another web browser and try again. A4. Reboot your modem router and try again. A5. Disable then enable the network adapter in use.

Q2. What should I do if the DSL LED does not turn solid on?

A1. Check your cables and make sure they are all plugged in correctly, including the

7106507153 REV1.0.1

telephone lines and power adapter. A2. Restore your modem router to its factory default settings. A3. Remove the DSL splitter, directly connect the modem router to the phone jack and

follow this guide to reconfigure the modem router. A4. Contact your ISP (internet service provider) to check the status of your DSL line. A5. If the problem persists, contact our Technical Support.

Q3. What should I do if I cannot access the internet?

A1. Make sure all telephone and Ethernet cables are correctly and securely connected to the

modem router.

A2. Try to log in to the web management page of the modem router using the default address

at http://tplinkmodem.net or http://192.168.1.1. If you cannot, change your computer settings to obtain an IP address automatically from the modem router. If you can, try the steps below.

A3. Consult your ISP (internet service provider) and make sure that the VPI/VCI (or VLAN ID),

Connection Type, account username and password are all correct. If they are not, please replace them with the correct settings and try again.

A4. Restore the modem router to its factory default settings and reconfigure it by following the

instructions in this guide.

A5. Please contact our Technical Support if the problem persists.

Q4. What should I do if I forget my password?

For the web management page:

A1. If you are using a TP-Link ID to log in, click Forgot password on the login page and then

follow the instructions to reset it.

A2. Alternatively, restore the modem router to its factory default settings and then set a

new password.

For the Wi-Fi network:

A1. The default Wi-Fi Password/PIN can be found on the Information Card that came in your

modem’s packaging or on the product label at the bottom of the modem router.

A2. If the default wireless password has been changed, log in to the web management

page and go to Basic > Wireless to retrieve or reset your password.

Q5. How do I restore the modem router to its factory default settings?

A1. With the modem router powered on,

press and hold the Reset button on the rear panel of the modem router for approximately 10 seconds until all LEDs turn back on, then release the button.

A2. Log in to the web management page of the modem router. Go to Advanced > System

Tools > Backup & Restore and click Factory Restore. The modem router will restore and reboot automatically.

Reset Button Press & Hold for 10 Seconds