Toyota TUNDRA 2008 Owners Manual
BASIC FUNCTIONS
SECTION 1
BASIC FUNCTIONS
Basic information before operation
Initial screen 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Touch screen operation 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inputting letters and numbers/list screen operation 20. . . . . . . . . . . . . . . . . . . . . . . .
Function help 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Map screen operation 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Current position display 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen scroll operation 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the screens 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Map scale 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Foot print map 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Orientation of the map 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Map icons 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Example of navigation system operation 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guiding the route 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Registering home 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
17
BASIC FUNCTIONS
Initial screen
1U5022aG
When the engine switch is turned to the ACC
or ON position, the initial screen will be
displayed and the system will begin operating.
CAUTION
When the vehicle is stopped with the engine running, always apply the parking
brake for safety.
After a few seconds, the “CAUTION” screen
will be displayed.
0U5701G
After about 5 seconds, the “CAUTION”
screen automatically switches to the map
screen. When the “MAP” button is also
pushed, the map screen is displayed.
While the “CAUTION” screen is displayed,
the “DEST” or “MENU” button cannot be
operated. And if the “Language”,
“Calendar” or “Maintenance” buttons on
the “Information” screen are touched, the
screen will change back to “CAUTION”
screen and then change to the map screen in
about 5 seconds later or if the “MAP” button
is pushed.
D Maintenance information
This system informs about when to replace
certain parts or components and shows dealer information (if registered) on the screen.
When the vehicle reaches a previously set
driving distance or date specified for a scheduled maintenance check, the “Information”
screen will be displayed when the navigation
system is in operation.
1U5024G
To disable this screen, touch “Do Not
Display This Message Again.”. This
screen goes off if the screen is not operated for several seconds.
To prevent this information screen from being
displayed again, touch “Do Not Display This
Message Again.”.
To register “Maintenance information”, see
“Maintenance information” on page 114.
18
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
BASIC FUNCTIONS
D Memo information
This system notifies about a memo entry. At
the specified date, the memo information will
be displayed when the navigation system is in
operation. The memo information screen will
be displayed every time the system is turned
on.
1U5702G
The memo of the current date can be
viewed by touching “Memo”. (See “ —
Editing a memo” on page 120.)
To disable this screen, touch “Do Not
Display This Message Again.”. This
screen goes off if the screen is not operated for several seconds.
To prevent this information screen from being
displayed again, touch “Do Not Display This
Message Again.”.
To register “Memo information”, see
“Calendar with memo” on page 117.
Touch screen operation
This system is operated mainly by the touch−
screen buttons on the screen.
To prevent damage to the screen, lightly
touch the touch−screen buttons on the
screen with the finger. When a touch−
screen button on the screen is touched, a
beep sounds.
Do not use objects other than the finger to
touch the screen.
INFORMATION
D If the system does not respond to a
touch on a touch−screen button,
move the finger away from the screen
and then touch it again.
D Dimmed touch−screen buttons can-
not be operated.
D Wipe off fingerprints on the surface of
the display using a glass cleaning
cloth. Do not use chemical cleaners
to clean the display.
D The displayed image may become
darker and moving images may be
slightly distorted when the display is
cold.
D Under extremely cold conditions, the
map may not be displayed and the
data input by a user may be deleted.
Also, the touch−screen buttons may
be harder than usual to depress.
D When you look at the screen through
polarized material such as polarized
sunglasses, the screen may be dark
and hard to see. If so, look at the
screen from different angles, adjust
the screen settings on the “Display”
screen, or take off your sunglasses.
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
19
BASIC FUNCTIONS
Inputting letters and
numbers/list screen operation
When searching for an address or a name, or
entering a memo, letters and numbers can be
input via the touch screen.
INFORMATION
Key layout can be changed. (See “D
Input key layout” on page 105.)
D To input letters
To display the alphabet keys, touch “A−Z” or
“ ”.
1U5001aG
Enter letters by touching the alphabet keys directly.
: Touching this touch−screen button
erases one letter. By holding this
touch−screen button, letters will
continue to be erase.
On certain letter entry screens, letters can be
entered in upper or lower case.
1U5026G
: To enter in lower case.
: To enter in upper case.
20
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
BASIC FUNCTIONS
D To input numerals and symbols
To display the number keys and symbol keys,
touch “0−9”.
1U5002aG
Enter numerals and symbols by touching the
number keys and symbol keys directly.
: Touching this touch−screen but-
ton erases one letter. By holding
this touch−screen button, letters
will continue to be erased.
: Touching this touch−screen but-
ton displays other symbols.
D To display the list
1U5044aG
To search for an address or a name, touch
“List”. Matching items from the database are
listed even if the entered address or name is
incomplete.
If the number of matches is four or less, the list
is displayed without touching “List”.
1U5003aG
INFORMATION
The number of matching items is shown
to the right side of the screen. If the
number of matching items is more than
9,999, the system displays “
the screen.
∗∗∗∗” on
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
21
BASIC FUNCTIONS
D List screen operation
When a list is displayed, use the appropriate
touch−screen button to scroll through the list.
1U5003aG
To shift to the next or previous
page.
To scroll up or down one item at a
time.
This expresses a displayed
screen position.
If appears to the right of the
item name, the complete name is
too long for the display. Touch
to scroll to the end of the name.
Touch to scroll to the beginning
of the name.
D Sorting
The order of a list displayed on the screen can
be rearranged.
TYPE A
RS02025
1. Touch “Sort by”.
22
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
BASIC FUNCTIONS
1U5028G
2. Select the desired sorting criteria.
Sorting criteria are as follows:
“Distance”: To sort in the order of distance
from your current location.
“Date”: To sort in the order of the date.
“Category”: To sort in the order of the cate-
gory.
“Icon”: To sort in the order of the icons.
“Name”: To sort in order by name.
“Attribute”: To sort in order by attribute.
TYPE B
1U5029G
“Dist. Sort”: To sort in the order of distance
from the current vehicle location. The distance from current vehicle position up to the
destination is displayed to the right of the
name.
“Name Sort”: To sort in alphabetical order by
name.
Function help
Explanations for the functions of the
“Destination”, “Setup”, and “Menu” screens
can be viewed.
RS02026
Touch “?”.
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
23
BASIC FUNCTIONS
1U5017aG
: To view the previous page.
: To view the next page.
: To return to the previous screen.
Map screen operation —
— Current position display
When starting the navigation system, the current position is displayed first.
This screen displays the current vehicle position and a map of the surrounding local area.
1U5030G
The current vehicle position mark (1) appears in the center or bottom center of the
map screen.
A street name will appear on the bottom of the
screen, depending on the scale of the map
2
).
(
You can return to this map screen that shows
your current position at any time from any
screen by pushing the “MAP/VOICE” button.
While driving, the current vehicle position
mark is fixed on the screen and the map
moves.
The current position is automatically set as
the vehicle receives signals from the GPS
(Global Positioning System). If the current
position is not correct, it is automatically corrected after the vehicle receives signals from
the GPS.
INFORMATION
D After battery disconnection, or on a
new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the
correct current position is displayed.
D To correct the current position manu-
ally, see “
change calibration” on page 110.
D Current position/tire
24
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
BASIC FUNCTIONS
— Screen scroll operation
(one−touch scroll)
When any point on the map is touched, that
point moves to the center of the screen and is
shown by the cursor mark (
1
).
1U5031bG
Use the scroll feature to move the desired
point to the center of the screen for looking at
a point on the map that is different from the
current position of the vehicle.
If the finger is continuously held on the
screen, the map will continue scrolling in that
direction until the finger is removed.
A street name, city name, etc. of the touched
point will be shown, depending on the scale
of the map (
position to
2
). Distance from the current
will also be shown (3).
After the screen is scrolled, the map remains
centered at the selected location until another
function is activated. The current vehicle
position mark will continue to move along
your actual route and may move off the
screen. When the “MAP/VOICE” button is
pushed, the current vehicle position mark returns to the center of the screen and the map
moves as the vehicle proceeds along the designated route.
INFORMATION
When the one−touch scroll feature is
used, the current vehicle position mark
may disappear from the screen. Move
the map with a one−touch scroll again or
push the “MAP/VOICE” button to return
to the current vehicle position map location display.
D To set the cursor position as a destina-
tion
A specific point on the map can be set as a
destination using the one−touch scroll function.
1U5006aG
Touch “Enter ”.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 61.)
If there is already a set destination, “Add to
” or “Replace ” are displayed.
“Add to
“Replace ”: To delete the existing destina-
tions and set a new one.
”: To add a destination.
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
25
BASIC FUNCTIONS
D To register the cursor position as a
memory point
Memory point registration enables easy access to a specific point.
1U5006aG
Touch “Mark”.
When you touch “Mark”, the following screen
appears for a few seconds, and then the map
screen returns.
1U5007aG
The registered point is shown by on the
map.
To change the icon or name, etc., see “ —
Editing memory points” on page 93.
Up to 106 memory points can be registered.
If there is an attempt to register more than
106, a message appears for confirmation.
1U5008bG
D To see information about the icon
where the cursor is set
1U5009G
To display information about an icon, set the
cursor on it.
26
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
BASIC FUNCTIONS
POI INFORMATION
When the cursor is set on a POI icon, the
name and “Info.” are displayed on the top of
the screen.
1U5010G
Touch “Info.”.
1U5049aG
Information such as the name, address, and
phone number are displayed.
If “Enter
cursor is set as a destination.
” is touched, the position of the
If there is already a set destination, “Add to
” and “Replace ” are displayed.
“Add to ”: To add a destination.
“Replace
tions and set a new one.
To register this POI as a memory point, touch
“Mark”. (See page 92.)
If
phone number can be called.
”: To delete the existing destina-
is touched, the registered tele-
INFORMATION
The desired Point of Interest can be
displayed on the map screen. (See “ —
Display POI icons” on page 76.)
MEMORY POINT INFORMATION
When the cursor is set on a memory point
icon, the name and “Info.” are displayed on
the top of the screen.
1U5012G
Touch “Info.”.
1U5050aG
Information such as the name, address, and
phone number are displayed.
If “Enter
cursor is set as a destination.
” is touched, the position of the
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
27
BASIC FUNCTIONS
If there is already a set destination, “Add to
” and “Replace ” are displayed.
“Add to ”: To add a destination.
“Replace
tions and set a new one.
To edit a memory point, touch “Edit”. (See “
— Editing memory points” on page 93.)
To delete a memory point, touch “Delete”.
If
phone number can be called.
”: To delete the existing destina-
is touched, the registered tele-
DESTINATION INFORMATION
When the cursor is set on a destination icon,
the name and “Info.” are displayed on the top
of the screen.
1U5014G
Touch “Info.”.
1U5015aG
Information such as the name, address, and
phone number are displayed.
To delete a destination, touch “Delete”.
If
phone number can be called.
is touched, the registered tele-
28
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
BASIC FUNCTIONS
— Switching the screens
Any one of the screen configurations can be
selected.
1U5032G
1. T ouch t h i s t o u ch−screen button to display the following screen.
1U5033G
Depending on the conditions, certain screen
configuration buttons cannot be selected.
: To display the single map screen.
(See page 29.)
: To display the dual map screen. (See
page 30.)
: To display the compass mode
screen. (See page 30.)
: To display the turn list screen. (See
page 68.)
: To display the arrow screen. (See
page 68.)
: To display the freeway information
screen. (See page 66.)
: To display the intersection guidance
screen or the guidance screen on the
freeway. (See page 67.)
D Screen configurations
SINGLE MAP
This is a regular map screen.
While on a different screen, touching
will display the single map screen.
1U5004G
The screen shows the single map.
2. To select the desired screen configuration, touch one of the following touch−
screen buttons.
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
29
BASIC FUNCTIONS
DUAL MAP
A map can be displayed split in two.
While on a different screen, touching
will display the dual map screen.
1U5034aG
The screen shows the dual map. The map on
the left is the main map.
The right side map can be edited by touching
any specific point on the right side map.
1U5035aG
This screen can perform the following procedures:
1. Changing the map scale
2. Displaying the POI icon
3. Changing the orientation of the map
Touch “OK” when you complete editing.
The screen returns to the dual map screen.
COMPASS MODE
Current vehicle position is indicated with a
compass, not with a map.
While on a different screen, touching
will display the compass mode screen.
1U5036aG
Information about the destination and current
position, as well as a compass, is displayed
on the screen.
The destination mark is displayed in the direction of the destination. When driving, refer to
the longitude and latitude coordinates and the
compass, to make sure that your vehicle is
headed in the direction of the destination.
INFORMATION
When the vehicle travels out of the coverage area, the guidance screen
changes to the compass mode screen.
30
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
BASIC FUNCTIONS
— Map scale
1U5018G
Touch or to change the scale of
the map display. The scale bar and indicator
at the bottom of the screen indicates the map
scale menu. The scale range is 150 feet (50
m) to 250 miles (400 km).
Touch
changes normally. By continuing to touch the
touch−screen button, the scale bar changes
smoothly.
The scale of the map display can be changed
by touching the scale bar directly. It is not
available while driving.
The map scale is displayed under the north−
up symbol or heading−up symbol at the top
left of the screen.
or until the scale bar
INFORMATION
When the map scale is at the maximum
range of 250 miles (400 km), is not
shown. When the map scale is at the
minimum range of 150 feet (50 m),
is not shown. However, in the area
where the foot print map is contained,
when the map scale is changed to 150
feet (50 m), changes to .
— Foot print map
For the area which is covered by the foot print
map (Some areas in the following cities; Detroit, Chicago, N.Y., L.A), you can switch to
the foot print map on a scale of 75 feet (25 m).
D To switch to the foot print map
changes into when the map is
scaled down to 150 feet (50 m).
1U5055G
To display the foot print map, touch .
To delete the foot print map display, touch
.
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
31
BASIC FUNCTIONS
INFORMATION
D If the map or the current position is
moved to the area which is not covered by the foot print map, the screen
scale automatically changes to 150
feet (50 m).
D On the foot print map, a one way
street is displayed by .
D It is not possible to perform scrolling
on the foot print map (one−touch
scroll) while driving.
D To display building information
Information is available only for buildings for
which information is recorded on the map
disc.
1U5057G
1U5056G
2. Using an eight−direction arrow, move
the cursor to the position of the building to
display building information.
3. Touch “Building Info.”.
1. Touch “Info.” while the foot print map
is displayed.
If the map is displayed by a split screen, the
map will change into a single map display.
32
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
BASIC FUNCTIONS
1U5058G
Details of POIs in some buildings may be displayed.
For detailed POI information, touch the building name. You can see details of the selected
POIs.
— Orientation of the map
1U5053G
" North−up screen
1U5052G
" Heading−up screen
The orientation of the map can be changed
from North−up to Heading−up by touching the
orientation symbol at the top left of the screen.
North−up symbol
Regardless of the direction of vehicle travel,
North is always up.
Heading−up symbol
The direction of vehicle travel is always up.
A red arrow indicates North.
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
33
BASIC FUNCTIONS
— Map icons
Icon
(Red)
(Turquoise)
(Gray)
(Yellow−green)
name
Freeway (Level 1, 2)
Main Street (Level 3, 4)
Residential (Level 5)
IPD (In−Process Data)
Railroad
Border
Island
Icon
name
Business facility
Airport
Military base
Higher education
Hospital
Sports complex
Shopping center
Golf course
Example of navigation system
operation —
— Guiding the route
Guidance to a destination occurs by specifying the destination using the “POI Name”.
XS00202
1. Push the “DEST” button.
34
Park/Recreation
Factory
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
BASIC FUNCTIONS
1U5016bG
2. Touch “POI Name”.
INFORMATION
There are 13 different methods to search
destinations. (See “Destination search”
on page 41.)
1U5037aG
3. Enter the name of the destination.
Every touch on a letter key narrows the selection.
Letters that cannot be selected in the database are dimmed out.
When there are four or fewer database items,
these items are displayed in a list.
Even if the entered name is incomplete,
touching “List” displays the list.
1U5038aG
4. Select the destination from the displayed list.
1U5039bG
5. Touch “Enter”.
The system starts route search and displays
recommended routes.
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
35
BASIC FUNCTIONS
1U5040aG
— Registering home
The home button on the “Destination” screen
can be used if your home has been registered. (See “ — Destination search by Home”
on page 44.)
1U5020bG
6. Touch “Guide”.
Route guidance starts.
Guidance is done by both the screen and
voice. (See “Route guidance screen” and
“Typical voice guidance prompts” on pages
66 and 68.)
INFORMATION
It is possible to change the route. (See
“Starting route guidance” on page 61.)
36
2. Touch “My Places”.
XS00201
1U5041aG
1. Push the “MENU” button.
3. Touch “Register”.
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
BASIC FUNCTIONS
RS02005a
4. Touch “Address”.
1U5043aG
5. Enter the house number.
1U5044aG
6. Enter the street name.
Every touch on a letter key narrows the selection.
Letters that cannot be selected in the database are dimmed out.
When there are four or fewer database items,
these items are displayed in a list.
Even if the entered name is incomplete,
touching “List” displays the list.
1U5045G
7. Select the street name from the displayed list.
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
37
BASIC FUNCTIONS
1U5046bG
8. Touch “Enter”.
Registration of home is complete and the
“Memory Point” screen is displayed.
1U5047aG
Registered “Home” information will be
displayed.
The icon, quick access, name, location and
phone number can be changed. (See “ —
Editing memory points” on page 93.)
38
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
DESTINATION SEARCH
SECTION 2
DESTINATION SEARCH
Quick reference (“Destination” screen) 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search 41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the search area 42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by Home 44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by Quick access 45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “Address” 45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “POI* Name” 49. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “POI* Category” 53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “Emergency” 56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “Memory” 57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “Previous” 57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “Map” 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “Intersection” 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “Freeway Ent./Exit” 59. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “Coordinates” 60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “Phone #” 60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting route guidance 61. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
*: Point of Interest
∗
:
Point of Interest
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
39
DESTINATION SEARCH
Quick reference (“Destination” screen)
The “Destination” screen allows you to
search for a destination. To display the
“Destination” screen, push the “DEST”
button.
1
“Address”
A house number and the street address can
be input by using the input keys. 45. . . . . . .
2
“POI Name”
Select one of the many POIs (Points of Interest) that have already been stored in the sys-
tem’s database. 49. . . . . . . . . . . . . . . . . . . . .
3
“POI Category”
A destination can be selected from the POI
category. 53. . . . . . . . . . . . . . . . . . . . . . . . . . .
4
“Previous”
A destination can be selected from any of the
last 100 previously set destinations and from
the previous starting point. 57. . . . . . . . . . . .
5
“Memory”
The location can be selected from the registered “Memory points”. (To register memory
points, see “ — Registering memory points”
on page 92.) 57. . . . . . . . . . . . . . . . . . . . . . . .
6
“Emergency”
One of the four categories of emergency service points that are already stored in the sys-
tem’s database can be selected. 56. . . . . . .
40
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
DESTINATION SEARCH
7
“Map”
A destination can be selected simply by
touching the location on the displayed map.
8
“Intersection”
The names of two intersecting streets can be
entered. This is helpful if only the general vicinity, not the specific address, is known.
9
“Freeway Ent./Exit”
The name of a freeway (interstate) entrance
or exit can be entered. 59. . . . . . . . . . . . . . .
10
“?”
Function help for the “Destination” screen can
be viewed on this screen. 23. . . . . . . . . . . . .
11
“Change”
To change the search area, touch this touch−
screen button. 42. . . . . . . . . . . . . . . . . . . . . .
12
Quick access touch−screen buttons
One of 5 preset destinations can be selected
by touching the screen directly. To use this
function, it is necessary to set the “Quick
Access” for each memory point. (To register
a “Quick Access”, see “ — Editing memory
points” on page 93.) 45. . . . . . . . . . . . . . . . .
58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
Home touch−screen button
A personal home address can be selected
without entering the address each time. To
use this function, it is necessary to set “Home”
for the memory point. (To register “Home”,
see “ — Registering home” on page 98.)
14
“Phone #”
A destination can be entered by the telephone
number. 60. . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
“Coordinates”
A destination can be set by using latitude and
longitude as coordinates. 60. . . . . . . . . . . . .
44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search —
XS00202
Push the “DEST” button and the
“Destination” screen appears.
2U5001aG
You can use one of 13 different methods to
search your destination. (See pages 44
through 61.)
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
41
DESTINATION SEARCH
INFORMATION
When searching the destination, the response to the touch−screen button may
be slow.
— Selecting the search area
SELECTING THE SEARCH AREA ON THE
DESTINATION SCREEN
1. Push the “DEST” button.
2U5703G
RS02027
3. Touch one of “US1” through “CAN” to
select a search area.
4. Touch “OK” and the “Destination”
screen returns.
2. Touch “Change” on the “Destination”
screen to display a map of the United
States and Canada divided into 12 areas.
(For map database information and updates,
see “Map database information and updates”
on page 236.)
42
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
DESTINATION SEARCH
SELECTING THE SEARCH AREA ON T HE
INPUT SCREEN
Change the search area in order to set a
destination from a different area by using
“Address”, “POI Name”, “Freeway Ent./Exit”,
or “Intersection”.
2U5103bG
1. Touch the search area button like
“US9” on the input screen to display a
map of the United States and Canada divided into 12 areas. (For map database in-
formation and updates, see “Map database
information and updates” on page 236.)
2U5703G
2. Touch one of “US1” through “CAN” to
select a search area.
3. Touch “OK” and the previous screen
returns.
U.S.A.
Button States included in the search area
Idaho
“US1”
“US2”
“US3”
“US4”
“US5”
“US6”
Oregon
Washington
California
Nevada
Arizona
Colorado
Montana
New Mexico
Utah
Wyoming
Iowa
Kansas
Minnesota
Missouri
North Dakota
Nebraska
South Dakota
Oklahoma
Texas
Illinois
Indiana
Kentucky
Michigan
Ohio
Wisconsin
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
43
DESTINATION SEARCH
Arkansas
Alabama
“US7”
“US8”
“US9”
“US10”
Louisiana
Mississippi
Tennessee
Connecticut
Massachusetts
Maine
New Hampshire
New Jersey
New York
Rhode Island
Vermont
Washington, D.C.
Delaware
Maryland
New Jersey
Pennsylvania
Virginia
West Virginia
Florida
Georgia
North Carolina
South Carolina
”HI” Hawaii
Button
“CAN”
Canada
Provinces and regions included in
the search area
All provinces and regions in
Canada included in this button.
— Destination search by Home
1. Push the “DEST” button.
2U5088aG
2. Touch the home touch−screen button
on the “Destination” screen.
The screen changes and displays the map
location for home and the route preference.
(See “Starting route guidance” on page 61.)
To use this function, it is necessary to set
“Home” for the memory point. (To register
“Home”, see page 98.)
INFORMATION
Guidance starts from the current vehicle
position to your home if “Enter” is
touched even while driving.
44
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
DESTINATION SEARCH
— Destination search by
Quick access
1. Push the “DEST” button.
2U5089aG
2. Touch any of the quick access touch−
screen buttons on the “Destination”
screen.
The screen changes and displays the map
location of the quick access point and the
route preference. (See “Starting route
guidance” on page 61.)
To use this function, it is necessary to set
“Quick access” for each memory point. (To
register “Quick Access”, see page 95.)
INFORMATION
Guidance starts from the current vehicle
position to the quick access point if
“Enter” is touched even while driving.
— Destination search by
“Address”
There are 2 ways to input a destination by address.
1. Push the “DEST” button.
2. Touch “Address” on the “Destination”
screen.
2U5003aG
(a) Inputting a house number and a street
name
2U5004aG
1. Touch numerals directly on the screen
to input a house number.
After inputting a house number, touch “OK”
to display the screen for inputting a street
name.
It is possible to input a street name first.
Touch “Street” to display the screen for in-
putting a street name.
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
45
DESTINATION SEARCH
2U5005aG
2. Input the street name and touch “List”.
2U5006G
3. When the desired street name is found,
touch the corresponding touch−screen
button.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 61.)
If the same address exists in more than one
city, the current screen changes to the city list
screen.
2U5007G
4. Select or enter the desired city.
“Input Name”: To narrow down the listed
items by inputting the city name.
46
2008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
Loading...