Toyota Corolla TNS600 2004 Installation Instructions Manual
Corolla
TNS600
RHD installation instructions
Model year: 2004
Vehicle code: **E12*R-****W
Part number: • Navigation System PZ 445-00331-00
• Clusterpanel 55406-02070-B0
Manual ref. n
o
: AIM 000 767-0
Corolla TNS600
Corolla (RHD) - 201-07
PRECAUTIONS
• Do not pinch the rear wiring or
harness in the tightened part.
PLEASE READ THOROUGHLY THESE PRECAUTIONS BEFORE THE INSTALLATION
• Be sure to disconnect the negative
(-) lead from the battery terminals.
• When passing the wires through the
dashboard or other panels, use a
grommet to ensure waterproofing.
• Protect the wiring with tape when it
is passed through a hole.
• When disconnecting the connectors,
be sure to grip the connector body.
Do not tug on the wiring.
• Do not forcibly pull any car wiring
harness. Rough tugging may result
in opened connections, or a broken
wire or harness.
•
Confirm that lamps, horn, wiper and
other car accessories operate normally.
• Protect your car with fender covers, seat and so on.
• Use the correct tool when tightening bolts or nuts.
• Before drilling a hole, check
that the rear of the mounting
wall is clear.
• Be sure to firmly tighten connectors and terminals.
• Before connecting the power
wiring to the battery, check the
wiring connections, harness,
etc. to see that they are properly
secured.
• Check body and trim near area of installation to be certain no
dirt or scratches resulted from the installation.
Stop it !
Waterproof - O.K. !!
Grommet
Taping
Insert completely
Corolla TNS600
Corolla (RHD) - 3 01-07
Precautions ............................................................................................................................................. 2
Component Parts ................................................................................................................................... 4
Required Parts ........................................................................................................................................ 6
Wiring Connection ................................................................................................................................. 7
Installation Overview .............................................................................................................................. 8
Installation of the GPS Antenna .............................................................................................................. 13
Wire Harness Installation ......................................................................................................................... 16
Installation of Navigation Disc ................................................................................................................ 22
Post-Installation Inspection ..................................................................................................................... 23
Reassembling ......................................................................................................................................... 24
TABLE OF CONTENTS
Corolla TNS600
Corolla (RHD) - 401-07
AUDIO DISPLAY TILT OPEN
MENU
SEEK
TRACK
DEST
MAP
VOICE
DISC
TUNE
VOICE NAVIGATION
PWR•VOL
T
A
INFO
F
M
AM
B-9001
TOYOTA
123
4
6
7
8
5
COMPONENT PARTS PZ 445-00331-00
N
O
Description Qty
1
TNS600 1
2
WIRE HARNESS 1
3
GPS ANTENNA 1
4
NAVIGATION DISC 1
5
CORD CLAMP 2
6
FOAM TAPE 2 + 3
7
WIRE TIE 10
8
EARTH PLATE 1
Corolla TNS600
Corolla (RHD) - 5 01-07
COMPONENT PARTS 55406-02070-B0
OWNER’S MANUAL
To be ordered separately.
Refer to ATA database for partnumbers
REQUIRED PARTS
Corolla TNS600
Corolla (RHD) - 601-07
Vehicle wire harness
Splicing connector
(Reverse sensor wire)
Antenna wire
GPS antenna
3
5P
TNS 600 Tuner with LCD Display
8P
10P
6P
Splicing connector
(Speed sensor wire)
HOW TO CONNECT
Refer to the repair manual for information on removal of vehicle parts, installation methods, tightening
torque etc.
Loading...