Toshiba W-727 User Manual
L
SQPB
Video Cassette Recorder
W-727
OWNER’S MANUAL
3
ABLE BOX
ONTRO
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
Product Name: Video Cassette Recorder
Model Number: W-727
FCC Notice: “Declaration of Conformity”.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful Interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Contact: Toshiba America Consumer Products, Inc.
Address: 1420 Toshiba Drive, Lebanon, TN 37087
Telephone: 615-449-2360
User Installer Caution: Changes or modification made to this equipment not expressly approved by
Toshiba Corporation or parties authorized by Toshiba Corporation could void the user’s authority
to operate the equipment.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building, as close to the point of cable entry as practical.
THIS APPLIANCE TO RAIN
OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE
ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
SLOT, FULLY INSERT.
Copyright
It is permissible to record television programs, film, video tapes and other material only
in the event that third party copyrights and other rights are not violated.
In the spaces provided below, record the Model and Serial No. located at the rear of your video
cassette recorder.
Model No. Serial No.
Retain this information for future reference.
2
IMPORTANT PRECAUTIONS
Save Original Packing Materials
The original shipping carton and packing materials will come in handy if you ever have to ship
your VCR. For maximum protection, repack the set as it was originally packed at the factory.
Avoid Volatile Liquid
Do not use volatile liquids, such as an insect spray, near the unit.
Do not leave rubber or plastic products touching the unit for a long time. They will mar the
finish.
Moisture Condensation
Never operate this unit immediately after moving it from a cold location to a warm location.
When the VCR is exposed to such a change in temperature, moisture may condense on the
cylinder inside, one of its most crucial internal parts. To prevent the VCR from possible
damage, do not use the unit for at least 2 hours when there is an extreme or sudden change
in temperature.
Compatibility
This video cassette recorder (VCR) is compatible with any other VCR bearing the
mark. HQ VHS equipment is also compatible with existing, non-HQ VHS equipment.
INTRODUCTION
As an ENERGY STAR Partner, TOSHIBA has determined that this product or
product model meets the E
®
NERGY STAR guidelines for energy efficiency.
®
3
IMPORTANT SAFETY
INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS
GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT.
RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can
result in electric shock or fire hazard. The safeguards incorporated in this unit will protect
you if you observe the following procedures for installation, use and servicing. This unit is
fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO
DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
ONLY.
1. Read owner’s manual
After unpacking this product, read the owner’s manual carefully, and follow all
the operating and other instructions.
2. Power Sources
This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company. For products
intended to operate from battery power, or other sources, refer to the operating
instructions.
3. Grounding or Polarization
This product may be equipped with a polarized alternating current line plug (a
plug having one blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
4. Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating, and these
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have
been adhered to.
5. Heat
The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
4
6. Water and Moisture
Do not use this product near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool and
the like.
7. Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
8. Power-Cord Protection
Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point where they exit from
the product.
9. Overloading
Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
10. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product, be sure the antenna or cable system
is grounded so as to provide some protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
S2898A
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
INTRODUCTION
11. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
5
IMPORTANT SAFETY
INSTRUCTIONS
12. Lightning
For added protection for this product during storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the
product due to lightning and power-line surges.
13. Object and Liquid Entry
Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
14. Attachments
Do not use attachments not recommended by the product manufacturer as they may cause hazards.
15. Accessories
Do not place this product on an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product. Any mounting of
the product should follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the product and cart
combination to overturn.
16. Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
product to its normal operation.
e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance - this indicates a need for service.
S3125A
17. Servicing
Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
18. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
19. Safety Check
Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper
operating condition.
6
Contents
INTRODUCTION
Provides important notes and general
explanation of the VCR, including names of the
buttons, jacks, etc.
SAFETY PRECAUTIONS .................... 2
IMPORTANT PRECAUTIONS ............. 3
IMPORT ANT SAFETY
INSTRUCTIONS................................... 4
Contents .............................................. 7
Identification of Controls ................... 8
• Front Panel
• Remote Control
• VCR Display
• Rear Panel
PREPARATION
Explains what you need to do before operating
the VCR.
How to Use the Remote Control...... 10
Connections ...................................... 11
Auto Set Up ....................................... 13
Initial Settings Using On-screen
Display ............................................... 14
• Setting the Language
• Optional settings on the SET UP
screen
• Setting the Clock
Storing Channels on the VCR.......... 16
Video Cassette Use .......................... 18
PLAYBACK
Explains variable functions concerning
playback.
Playback ............................................ 19
• Basic Playback
• Double Speed Playback
• S-VHS Quasi Playback (SQPB)
Variable Speed Playback ................. 20
• Picture Search
• Commercial Movie Skip
• Still Picture
• Frame Advance
• Slow-motion Picture
Useful Functions in Tape
Operation........................................... 22
• Counter Function
• Tape Remaining Time
• Memory Stop Feature
RECORDING
Explains recording functions.
Recording a TV Program.................. 24
• Basic Recording
• Watching a TV program while
recording another
• Skipping unnecessary scenes while
recording
• Recording off time setting
Timer Program Recording ............... 25
3
VCR Plus+ C System Set-up ........ 28
VCR Plus+ C System Recording .. 30
®
3
®
Cable Box Set-up .............................. 32
®
DSS Satellite Receive Set-up ............... 36
MTS Broadcast Compatibility ......... 39
ADDITIONAL INFORMATION
Multi Brand Remote Control ............ 40
Before Calling Service Personnel ... 42
Specifications ................................... 44
Accessories ...................................... 44
Memo ................................................. 45
LIMITED WARRANTY................
Back cover
INTRODUCTION
7
)
INTRODUCTION
Identification of Controls
See the page in for details.
This manual shows the names of buttons in italics.
Front Panel
POWER
14
EJECT
CHANNEL
18 24
Cassette compartment
18
STOP
PLAY
19
19
19
19
20
SHUTTLE
LINE IN 2 VIDEO jack
Remote Control
To operate this TV.
To operate your VCR.
REMAIN/COUNTER
REC
24
LINE IN 2 AUDIO
(L/MONO, R) jacks
TV
40
14
VCR
Number
I. SELECT
DISPLAY
CANCEL
VCR Plus+
A.SELECT
buttons
SP/SLP
REC
SLOW
REW
PROG.
EJECT
17
24
22
22
24
24
21
19
*
14
27
30
18
39
Remote
10
Sensor
VCR
TV
2
1
456
8
7
I.SELECT
0
REMAIN/
DISPLAY
COUNTER
SP/SLP
REC
SLOW
CURSOR
REW FF
PROG. ENTER
CANCEL
VCR Plus+
A.SELECT
EJECT
COUNT RESET
PLAY/x2
STOP
3
9
100
CM SKIP
CABLE BOX
CH
VCR Display
POWER
CH/TRK
TV VOL
TV/VCR
TIMER
PAUSE/STILL
POWER
20
9
PAUSE/STILL
POWER
14
CH/TRK
19
TV VOL
40
100
17
24
TV/VCR
22
COUNT RESET
TIMER
26
PAUSE/STILL
20
19
FF
*
19
PLAY/x2
*,
ENTER
14
POWER (CABLE BOX
34
34
CH (CABLE BOX)
20
CM SKIP
STOP
*
* These buttons are used to control the
cursor on the screen.
8
20
SHUTTLE DIAL
21
JOG DIAL
VCR Display
Cassette indicator
VCR indicator
Rear Panel
VCR
Multifunctional
indicator
LINE OUT AUDIO jacks (L, R)
Hi-Fi indicator
Timer recording indicator
TIMER
Hi-Fi
SAP
SAP indicator
RF IN (FROM ANT.) terminal
LINE IN 1 AUDIO jacks (L, R)
LINE
LINE
IN
OUT
IN 1
(FROM ANT.)
R
AUDIO
L
RF
OUT
(TO TV)
VIDEO
CH
34
To wall outlet
LINE OUT VIDEO jack
LINE IN 1 VIDEO jack
CH selector (3/4)
RF OUT (TO TV) terminal
LINE IN 1 AUDIO (Rear), 2 (Front) jacks
If the connected equipment is monaural (has one audio output jack), connect the L (MONO) side, the same
sound is recorded on both L and R on the Hi-Fi track.
9
PREPARATION
+
+
How to Use the Remote Control
This section explains how to get ready for remote control operation.
Setting up the Remote Control
Open the battery compartment lid on the
1
rear panel.
Install 2 batteries (“AAA” size) following
2
the polarity diagrams.
Close the battery compartment lid.
3
Point the remote control at the VCR and press the buttons within the operating range.
4
Distance: within about 7 m from the front of the remote sensor
Angles: within about 30˚ in every direction
Notes on batteries
• The life of the batteries is about 1 year
depending on the conditions of use.
• If the remote control does not operate correctly,
replace all batteries with new ones.
• If the remote control is not to be used for a
10
long period of time, remove the batteries to
avoid possible damage from battery corrosion.
Caring for the remote control
• Do not expose the remote sensor of the VCR
to a strong light source such as direct sunlight
or illumination (especially high-frequency
lighting) when using the remote control.
• Be careful not to spill water on the remote
control or to place it on anything wet, and avoid
sharp impacts.
PREPARATION
Connections
Before you use this VCR, it is necessary to connect it to your TV. Several ways of connecting are
available depending on your use of TV or cable box. Select one which is applicable to your equipment.
Antenna/VCR/TV Connection
Disconnect the antenna cable from your TV and connect it to the RF IN terminal on the
1
VCR.
Connect the RF OUT terminal to the TV.
2
VHF/UHF
combination antenna
VHF antenna
only
UHF antenna
only
PREPARATION
LINE
LINE
IN
OUT
IN 1
(
FROM ANT.)
R
AUDIO
L
RF
OUT
(
TO TV)
VIDEO
CH
34
Setting the VCR Output Channel
When the VCR is connected in this way, the VCR sends the output
signals to channel 3 or 4 on your TV. Set the output channel
selector (CH selector) of the VCR to “3” or “4”, whichever is vacant
IN
(
FROM ANT.)
OUT
(
TO TV)
1
RF
2
Antenna splitter
(not supplied)
in your area.
AUDIO/VIDEO Connections
The AUDIO/VIDEO jacks are also available to connect your TV.
LINE
LINE
IN
OUT
IN 1
(
FROM ANT.)
R
AUDIO
L
RF
OUT
(
TO TV)
VIDEO
CH
34
LINE OUT VIDEO
VIDEO IN
AUDIO INLINE OUT AUDIO
When connected your TV using the
AUDIO/VIDEO OUT jacks
To watch video pictures, set the video input mode
on your TV. For the video input mode, refer to the
manual of your TV .
Cable Connection
Choose one of the below according to your usage of the cable box.
This set-up will enable you to:
LINE
OUT
Incoming cable
LINE
IN
IN 1
(
FROM ANT.)
R
AUDIO
L
RF
OUT
(
TO TV)
VIDEO
CH
34
– record an unscrambled channel.
– watch an unscrambled channel while recording it.
– record an unscrambled channel while watching
another (only when you connect a cablecompatible TV).
You will need to:
• select TV channel 3 or 4 to receive video signals.
• to record a channel while watching another, press
TV/VCR
on the remote control to turn off the
“VCR” indicator in the VCR display and select a
desired channel on the TV (only when you connect
a cable-compatible TV).
VHF/UHF
VHF UHF
11
Connections (continued)
LINE
LINE
IN
OUT
IN 1
(
FROM ANT.)
R
AUDIO
L
RF
OUT
(
TO TV)
VIDEO
CH
34
Cable box
Incoming cable
IN
OUT
This set-up will enable you to:
– record an unscrambled channel.
– watch an unscrambled channel while recording it.
– record an unscrambled channel while watching
another (scrambled or unscrambled).
You will need to:
• set TV channel to the output channel of the cable
box.
• turn on the cable box and select cable channel 3
or 4 according to the output channel of the VCR.
• to record a channel while watching another,
press
TV/VCR
the “VCR” indicator in the VCR display and select
a desired cable channel on the cable box.
on the remote control to turn off
IN
Incoming cable
12
Cable box
Cable box
Cable box
OUT
LINE
LINE
OUT
IN 1
R
AUDIO
L
VIDEO
CH
34
A/B switch
A
A
A
B
B
B
LINE
LINE
OUT
IN 1
LINE
OUT
IN
(
FROM ANT.)
RF
OUT
(
TO TV)
– watch an unscrambled or scrambled channel
while recording it.
– record any channels through the cable box.
You will need to:
This set-up will enable you to:
• set TV channel 3 or 4 to receive video signals.
(See page 11.)
• set VCR channel to the output channel of the
cable box, and select a desired cable channel
on the cable box.
• while the VCR is turned off or the “VCR”
indicator is not lit in the VCR display, set TV
channel to the output channel of the cable box.
This set-up will enable you to:
– watch an unscrambled or scrambled channel
while recording it.
– record an unscrambled channel while watching
IN
(
FROM ANT.)
R
AUDIO
L
RF
OUT
(
TO TV)
VIDEO
CH
34
another unscrambled channel (only when you
connect a cable-compatible TV).
• A/B switch “A”:record and watch an
unscrambled channel which
comes bypassing the cable
box.
• A/B switch “B”:record and watch a scrambled
or unscrambled channel coming
through the cable box.
This set-up will enable you to:
– watch or record a channel through the cable
box via the LINE IN 1 (AUDIO/VIDEO) jacks.
LINE
IN
IN 1
(
FROM ANT.)
R
AUDIO
L
RF
OUT
(
TO TV)
VIDEO
CH
34
You will need to:
• press
I.SELECT
shows “L1”.
so that the VCR display
PREPARATION
L
Auto Set Up
The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet.
Auto Set up
Plug the VCR into the AC outlet
VCR
TV
2
1
3
456
9
8
7
I.SELECT
100
0
REMAIN/
DISPLAY
COUNT RESET
COUNTER
SP/SLP
REC
PLAY/x2
SLOW
CURSOR
REW FF
STOP
PROG. ENTER
CANCEL
CABLE BOX
A.SELECT
CM SKIP
CH
VCR Plus+
EJECT
POWER
CH/TRK
TV VOL
TV/VCR
TIMER
PAUSE/STILL
CANCE
POWER
1
“Auto” blink while the VCR automatically sets the clock using
2
the data broadcast by the local TV stations.
While “Auto” is blinking, channel memory is also set
automatically.
When Auto set up has been completed, the VCR is on
3
standby mode.
Notes
• It may takes several minutes during the Auto set-up
• Press
CANCEL
on the remote control to cancel the auto set-up.
PREPARATION
13
PREPARATION
P
Initial Settings Using On-screen Display
The language selection and clock setting must be set first when VCR is first plugged in or after it
encounters a power failure.
Preparation
• Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video
connection (page 11).
• Press VCR to set the remote control operating the VCR.
VCR
Setting the Language
POWER
VCR
TV
123
456
8
7
I.SELECT
0
REMAIN/
DISPLAY
COUNT RESET
COUNTER
SP/SLP
REC
PLAY/x2
SLOW
CURSOR
REW FF
STOP
PROG. ENTER
CANCEL
VCR Plus+
A.SELECT
EJECT
CH/TRK
TV VOL
9
100
TV/VCR
TIMER
PAUSE/STILL
CABLE BOX
CH
CM SKIP
ENTER
POWER
POWER
REW
FF
PLAY/X2, STO
PROG.
Optional settings on the SET UP screen
Other optional settings can be made. Press
The screen turns to the SET UP screen.
Press
Press
POWER
PROG.
1
2
The following screen appears on the TV.
Select the language using
3
or
STOP
and press
The screen turns to the MENU screen.
Press
4
PROG.
ENTER
to turn on the VCR.
.
PLAY/x2
PROG.
MEnU
to return to the normal TV screen.
while “SET UP” is selected on the MENU screen.
To exit, press
14
PROG.
once.
Page 22
Page 39
Page 23
To change the language, move down here and set to the desired one.
Loading...