TOSHIBA W602C Service Manual

W-602C

Videograbadoras

Contenido

Guía de servicio

Precauciones

Información de referencia

Especificaciones del producto

Desemsamble y reensamble

Ajuste y alineamiento

Vista explotada

Lista de partes de reemplazo

Diagrama a bloques

Diagramas PCB (Placa de Circuito Impreso)

Diagramas esquemáticos

FILE NO. 120-200014

SERVICE MANUAL

VIDEO CASSETTE RECORDER

W-602C

PRINTED IN KOREA. APR, 2000

TOTAL CONTENTS

◆ Service Guide

1. Precautions

2. Reference Information

3. Product Specifications

4. Disassembly and Reassembly

5. Alignment and Adjustment

6. Exploded View

7. Replacement Parts List

8. Block Diagram

9. PCB Diagrams

10. Schematic Diagrams

Toshiba

SERVICE GUIDE

Assy Cylinder, the Capsrtan Motor & TM-Block are used for this model, as shown below.

Assy-Cylinder

How to identify the Assy-Cylinder

Fig. 1

1) Three kinds of the Assy-Cylinder as shown below. Œ ALPS Cylinder ´ SEM Cylinder

Connector ; Pin 7 Connector ; Pin 5 Connector ; Pin 5

2) When replacing the Assy-Cylinder, be sure to replace only “SEM Cylinder”.

The only part-no of “SEM Cylinder” is shown in the “CH7. Replacement Parts List” of Service Manual.

3) When changing from ALPS (connector ; pin 7) cylinder to SEM (connector ; pin 5) cylinder.

- Change CN605 (Connector ; pin 7 pin 5)

- Change CN605B (Cable-Flat ; pin 7 pin 5)

4) After replacing the “SEM Cylinder”, use type

“C, D, G, H”

optional for “NVRAM Option Setting”. (See page 5-9)

The Maker of Assy Cylinder

1 2

ALPS SEM

The Maker of Assy Capstan Motor

1 2

SANKYO SEM

Two kinds of TM-Block

1 2

SIF available Not SIF availablea

ALPS Cylinder SEM Cylinder

CONNECTOR ; Pin 7 or Pin 5

CONNECTOR ; Pin 5

Toshiba

How to identify the Capstan Motor

Fig. 2

1) Two kinds of the Capstan Motor Œ Sankyo Capstan Motor ´ SEM Capstan Motor

2) When replacing the Capstan Motor, be sure to replace only “SEM Capstan Motor”.

The only part-no of “SEM Capstan Motor” is shown in the “CH7. Replacement Parts List” of Service Manual.

3) After replacing the “SEM Capstan Motor”, use type

“E, F, G, H”

optional for “NVRAM Option Setting”. (See page 5-9)

Capstam Motor

TM-BLOCK

1) Two kinds of the TM-Blovk Œ SIF available

´ Not SIF available

2) How to identify TM-Block ; See page 5-11 (Fig. 5-21)

- In case there is VR501 ; Not SIF available

- In case there is no VR501 ; SIF available

3) When replacing the TM-Block as a service parts, be sure to replace only the TM-Block which is SIF available.

The only part-no of “SIF available” is shown in the “CH7. Replacement Parts List” of Service Manual.

4) After replacing “TM-Block”, use type

“B, D, F, H”

optional for “NVRAM Option Setting” regardless of VR501. (See page 5-9)

TOP VIEW

SANKYO CAPSTAN MOTOR SEM CAPSTAN MOTOR

CAPSTAN SHAFT CAPSTAN SHAFT

Toshiba 1-1

1. Precautions

1. Be sure that all of the built-in protective devices are replaced. Restore any missing protective shields.

2. When reinstalling the chassis and its assemblies, be sure to restore all pretective devices, including : control knobs and compartment covers.

3. Make sure that there are no cabinet openings through which people--particularly children

--might insert fingers and contact dangerous voltages. Such openings include the spacing between the picture tube and the cabinet mask, excessively wide cabinet ventilation slots, and improperly fitted back covers.

If the measured resistance is less than 1.0 megohm or greater than 5.2 megohms, an abnormality exists that must be corrected before the unit is returned to the customer.

4. Leakage Current Hot Check (See Fig. 1-1) : Warning : Do not use an isolation transformer during this test. Use a leakage current tester or a metering system that complies with American National Standards Institute (ANSI C101.1, Leakage Current for Appliances), and Underwriters Laboratories (UL Publication UL1410, 59.7).

5. With the unit completely reassembled, plug the AC line cord directly the power outlet. With the unit’s AC switch first in the ON position and then OFF, measure the current between a known erath ground (metal water pipe, conduit, etc.) and all exposed metal parts, including : antennas, handle brackets, metal cabinets, screwheads and control shafts. The current measured should not exceed

0.5 milliamp. Reverse the power-plug prongs in the AC outlet and repeat the test.

6. X-ray Limits : The picture tube is designed to prohibit X-ray emissions. To ensure continued X-ray protection, replace the picture tube only with one that is the same type as the original.

Fig. 1-1 AC Leakage Test

7. Antenna Cold Check : With the unit’s AC plug disconnected from the AC source, connect an electrical jumper across the two AC prongs. Connect one lead of the ohmmeter to an AC prong. Connect the other lead to the coaxial connector.

8. High Voltage Limit : High voltage must be measured each time servicing is done on the B+, horizontal deflection or high voltage circuits.

Heed the high voltage limits. These include the

X-ray protection Specifications Label, and the Product Safety and X-ray Warning Note on the

service data schematic.

9. Some semiconductor (“solid state”) devices are easily damaged by static electricity. Such components are called Electrostatically Sensitive Devices (ESDs); examples include integrated circuits and some field-effect transistors. The following techniques will reduce the occurrence of component damage caused by static electricity.

10. Immediately before handling any semiconductor

components or assemblies, drain the electrostatic charge from your body by touching a known earth ground. Alternatively, wear a discharging Wrist-strap device. (Be sure to remove it prior to applying power--this is an electric shock precaution.)

DEVICE UNDER

TEST

(READING SHOULD

NOT BE ABOVE

0.5mA)

LEAKAGE CURRENT

TESTER

EARTH

GROUND

TEST ALL

EXPOSED METER

SURFACES

ALSO TEST WITH

PLUG REVERSED

(USING AC ADAPTER

PLUG AS REQUIRED)

2-WIRE CORD

Precautions

1-2 Toshiba

11. High voltage is maintained within specified limits by close-tolerance, safety-related components and adjustments. If the high voltage exceeds the specified limits, check each of the special components.

12. Design Alteration Warning : Never alter or add to the mechanical or electrical design of this unit. Example : Do not add auxiliary audio or video connectors. Such alterations might create a safety hazard. Also, any design changes or additions will void the manufacturer’s warranty.

13. Hot Chassis Warning : Some TV receiver chassis are electrically connected directly to one conductor of the AC power cord. If an isolation transformer is not used, these units may be safely serviced only if the AC power plug is inserted so that the chassis is connected to the ground side of the AC source.

To confirm that the AC power plug is inserted correctly, do the following : Using an AC voltmeter, measure the voltage between the chassis and a known earth ground. If the reading is greater than 1.0V, remove the AC power plug, reverse its polarity and reinsert. Re-measure the voltage between the chassis and ground.

14. Some TV chassis are designed to operate with 85 volts AC between chassis and ground, regardless of the AC plug polarity. These units can be safely serviced only if an isolation transformer inserted between the receiver and the power source.

15. Never defeat any of the B+ voltage interlocks. Do not apply AC power to the unit (or any of its assemblies) unless all solid-state heat sinks are correctly installed.

16. Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead; always remove the instrument’s ground lead last.

17. Observe the original lead dress, especially near the following areas : Antenna wiring, sharp edges, and especially the AC and high voltage power supplies. Always inspect for pinched, outof-place, or frayed wiring. Do not change the spacing between components and the printed circuit board. Check the AC power cord for damage. Make sure that leads and components do not touch thermally hot parts.

18. Picture Tube Implosion Warning : The picture tube in this receiver employs “integral implosion” protection. To ensure continued implosion protection, make sure that the replacement picture tube is the same as the original.

19. Do not remove, install or handle the picture tube without first putting on shatterproof goggles equipped with side shields. Never handle the picture tube by its neck. Some “in-line” picture tubes are equipped with a permanently attached deflection yoke; do not try to remove such “permanently attached” yokes from the picture tube.

20. Product Safety Notice : Some electrical and mechanical parts have special safety-related characteristics which might not be obvious from visual inspection. These safety features and the protection they give might be lost if the replacement component differs from the original--even if the replacement is rated for higher voltage, wattage, etc.

Components that are critical for safety are indicated in the circuit diagram by shading, ( or ). Use replacement components that have the same ratings, especially for flame resistance and dielectric strength specifications. Areplacement part that does not have the same safety characteristics as the original might create shock, fire or other hazards.

Toshiba 2-1

2. Reference Information

2-1 Operation of Controls

INTRODUCTION

STEREO indicator

Cassette indicator

VCR Display

SAP indicator

Hi-Fi indicator

Timer recording indicator

Hi-Fi

TIMER

SAP

STEREO

L R

REC

SLP

VCR

Hi-Fi (L/R) indicators

L: Left channel

R:Right channel

off: Normal track

Multifunctional

indicator

REC (Recording)

indicator

VCR indicator

Tape speed indicator (SP/SLP)

Rear Panel

TO TV)

OUT

(

FROM ANT.)

(

VIDEO

AUDIO

IN 1

LINE

OUT

LINE

RF IN (FROM ANT.) terminal

LINE IN 1 AUDIO jacks (L, R)

LINE IN 1 VIDEO jack

LINE OUT AUDIO jacks (L, R)

RF OUT (TO TV) terminal

CH selector (3/4)

LINE OUT VIDEO jack

LINE IN 1 AUDIO (Rear), 2 (Front) jacks

If the connected equipment is monaural (has one audio output jack), connect the L (MONO) side, the same

sound is recorded on both L and R on the Hi-Fi track.

STOP

PLAY

Cassete compartment

REW

CHANNEL

EJECT

STOP

PLAY

REW

CHANNEL

EJECT

POWER

See the page in for details.

This manual shows the names of buttons in italics.

Identification of Controls

INTRODUCTION

Front Panel

POWER

CH/TRK

COUNT RESET

TIMER

TV/VCR

PLAY *

22261919201914

FF *

PAUSE/STILL

STOP *

ENTER

* These buttons are used to control the

cursor on the screen.

TV VOL

100

VCR Display

Remote

Sensor

POWER

VCR TV

CH/TRK

TV/VCR

TV VOL

100

COUNT RESET

REMAIN/

COUNTER

I.SELECT

DISPLAY

FFREW

TIMER

REC

SP/SLP

PAUSE/STILL

PLAY

CURSOR

STOP

SLOW

CANCEL

PROG. ENTER

A.SELECT

VC-602

EJECT

REC

LINE IN 2 AUDIO

(L/MONO, R) jacks

1429242422

VCR

I. SELECT

L/MONO AUDIO R

LINE IN 2

VIDEO

Remote Control

LINE IN 2 VIDEO jack

Number buttons

To operate your TV.

To operate this VCR.

SP/SLP

DISPLAY

REMAIN/COUNTER

REC

REW *

SLOW

PROG.

EJECT

CANCEL

A.SELECT

Reference Information

2-2 Toshiba

PREPARATION

VHF UHF

VHF/UHF

OUT

(

TO TV)

(

FROM ANT.)

LINE

OUT

LINE

IN 1

VIDEO

AUDIO

OUT

(

TO TV)

(

FROM ANT.)

Antenna/VCR/TV Connection

Disconnect the antenna cable from your TV and connect it to the RF IN terminal on the

VCR.2Connect the RF OUT terminal to the TV.

AUDIO/VIDEO Connections

The AUDIO/VIDEO jacks are also available to connect your TV.

When connected your TV using the

AUDIO/VIDEO OUT jacks

To watch video pictures, set the video input mode

on your TV. For the video input mode, refer to

the manual of your TV.

Setting the VCR Output Channel

When the VCR is connected in this way, the VCR sends the output

signals to channel 3 or 4 on your TV. Set the output channel

selector (CH selector) of the VCR to “3” or “4”, whichever is vacant

in your area.

VHF/UHF

combinaion antenna

VHF antenna

only

UHF antenna

only

Antenna splitter

(not supplied)

Connections

Before you use this VCR, it is necessary to connect it to your TV. Several ways of connecting are

available depending on your use of TV or cable box. Select one which is applicable to your equipment.

PREPARATION

OUT

(TO TV)

(FROM ANT.)

LINE

OUT

LINE

IN 1

VIDEO

AUDIO

LINE OUT VIDEO

VIDEO IN

AUDIO INLINE OUT AUDIO

Cable Connection

Choose one of the below according to your usage of the cable box.

This set-up will enable you to:

– record an unscrambled channel.

– watch an unscrambled channel while recording it.

– record an unscrambled channel while watching

another (only when you connect a cable-

compatible TV).

You will need to:

• select TV channel 3 or 4 to receive video signals.

• to record a channel while watching another, press

TV/VCR on the remote control to turn off the

“VCR” indicator in the VCR display and select a

desired channel on the TV (only when you connect

a cable-compatible TV).

OUT

(

TO TV)

(

FROM ANT.)

LINE

OUT

LINE

IN 1

VIDEO

AUDIO

Incoming cable

This section explains how to get ready for remote control operation.

How to Use the Remote Control

PREPARATION

Open the battery compartment lid on the

Setting up the Remote Control

rear panel.

Install 2 batteries (“AAA” size) following

the polarity diagrams.3Close the battery compartment lid.

Point the remote control at the VCR and press the buttons within the operating range.

Distance: within about 7 m from the front of the remote sensor

Angles: within about 30˚ in every direction

to a strong light source such as direct sunlight

or illumination (especially high-frequency

Caring for the remote control

Notes on batteries

lighting) when using the remote control.

• Do not expose the remote sensor of the VCR

depending on the conditions of use.

correctly, replace all batteries with new ones.

• The life of the batteries is about 1 year

• If the remote control does not operate

control or to place it on anything wet, and avoid

sharp impacts.

• Be careful not to spill water on the remote

long period of time, remove the batteries to

avoid possible damage from battery corrosion.

• If the remote control is not to be used for a

Reference Information

Toshiba 2-3

PREPARATION

Auto Set Up

The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet.

PREPARATION

Auto Set up

Plug the VCR into the AC outlet2“AUTO” blink while the VCR automatically sets the clock

using the data broadcast by the local TV stations.

While “AUTO” is blinking, channel memory is also set

automatically.

When Auto set up has been completed, the VCR is on

standby mode.

Notes

• It may takes several minutes during the Auto set-up

• Press CANCEL on the remote control to cancel the auto set-up.

100

STOP

PLAY

FFREW

CANCEL

another (scrambled or unscrambled).

box.

or 4 according to the output channel of the VCR.

press TV/VCR on the remote control to turn off

the “VCR” indicator in the VCR display and select

This set-up will enable you to:

– record an unscrambled channel.

– watch an unscrambled channel while recording it.

– record an unscrambled channel while watching

You will need to:

• set TV channel to the output channel of the cable

• turn on the cable box and select cable channel 3

a desired cable channel on the cable box.

• to record a channel while watching another,

while recording it.

This set-up will enable you to:

– watch an unscrambled or scrambled channel

– record any channels through the cable box.

(See page 11.)

cable box, and select a desired cable channel

on the cable box.

indicator is not lit in the VCR display, set TV

You will need to:

• set TV channel 3 or 4 to receive video signals.

• set VCR channel to the output channel of the

channel to the output channel of the cable box.

• while the VCR is turned off or the “VCR”

unscrambled channel which

comes bypassing the cable

while recording it.

another unscrambled channel (only when you

This set-up will enable you to:

– watch an unscrambled or scrambled channel

connect a cable-compatible TV).

– record an unscrambled channel while watching

• A/B switch “A”:record and watch an

box.

or unscrambled channel coming

through the cable box.

• A/B switch “B”:record and watch a scrambled

This set-up will enable you to:

– watch or record a channel through the cable

OUT

TO TV)

OUT

(

FROM ANT.)

Cable box

Incoming cable

TO TV)

OUT

(

FROM ANT.)

(

VIDEO

AUDIO

IN 1

LINE

OUT

LINE

Connections (continued)

TO TV)

OUT

(

FROM ANT.)

(

VIDEO

AUDIO

IN 1

LINE

OUT

LINE

OUT

Cable box

Incoming cable

A/B switch

Cable box

(

VIDEO

AUDIO

IN 1

LINE

OUT

LINE

Cable box

box via the LINE IN 1 (AUDIO/VIDEO) jacks.

shows “L1”.

You will need to:

• press I.SELECT so that the VCR display

TO TV)

OUT

(

FROM ANT.)

(

VIDEO

AUDIO

IN 1

LINE

OUT

LINE

Reference Information

2-4 Toshiba

PREPARATION

Press ENTER to start the “AUTO” clock

set feature.

After the VCR is turned off, it automatically

updates the clock using the data broadcast

by the local TV stations.

The clock is

revised by

broadcasting

signal at 8:00 A.M

every morning.

Select the options using FF or REW.

Change the data using PLAY or STOP.

1) Set “SUMMER TIME

(Daylight-Saving Time)”.

DST start: Daylight-saving time begins on

the first Sunday in April. Because the

clock automatically changes from 2:00 AM

to 3:00 AM (forward one hour).

DST end: Daylight-saving time ends on

the last Sunday in October. The VCR

clock automatically changes from 2:00 AM

to 1:00 AM (back one hour).

remember that any part of a scheduled

Timer Recording that falls between these

two times will not be recorded.

AUTO: the VCR is using the clock data

Broadcast by the local TV stations.

IN: You want to use the DST function, and

you are leaving in the area that apply

Daylight-saving time.

OUT: You are not leaving in the area that

apply Daylight-saving time and you do not

want to use DST function.

2) Set “TIME ZONE”.

If you select “AUTO” for your time zone,

the VCR sets the clock using the first

Coordinated Universal Time information it

finds. If the time is not correct, select

another time zone or use the “MANU”

option.

3) Set “CLOCK DATA CH”.

If you don't know the clock data channel,

select “AUTO”. The VCR will scan

automatically to tune the channel carrying

the clock data.

If AUTO CLOCK SET is unsuccessful, set the

time and date through the “MANU” clock

set menu selection.

Press PROG..

Now the clock starts.

Setting the Clock

Example: To set the clock to 2:30 p.m. on

August 25 (summer time) 2000.

Press PROG..

The MENU screen appears on the TV.

Select “PRESET” using FF or REW, and

press ENTER.

Press ENTER to select “CLOCK SET”.

Select “AUTO” or “MANU” using PLAY or

STOP.

AUTO: The VCR automatically sets or

adjusts the clock.

If you select “AUTO” mode, proceed to step 8.

MANU: You can set the clock manually.

If you select “MANU” mode, proceed to next

step.

Vary the digits to set the hour.

PLAY : To increase.

STOP : To decrease.

Move to the next using FF

(To move back, press REW.)

Repeat step 5 and 6 to set the minutes,

month, day, and the year (by the last

two digits).

Proceed to step 10 to start the clock.

D : PROG

SET UP

PRESET

PROGRAM

ENTER

CLOCK SET

SUMMER TIME

TIME ZO

E CH

AUTO

SCANNING NOW

D : PROG

SET UP

PRESET

PROGRAM

ENTER

CLOCK SET

CH MEMORY

D : PROG

SET UP

PRESET

PROGRAM

ENTER

CLOCK SET

SUMMER TIME

TIME ZONE CH

AUTO

PRESS E

TER

TO START SETTI

The language selection and clock setting must be set first when VCR is first plugged in or after it

encounters a power failure.

Initial Settings Using On-screen Display

PREPARATION

ENTER

PRESET

SET UP

PROGRAM

D : PROG

(CURSOR ) or STOP

(CURSOR ) , and press PROG..

The screen turns to the MENU screen.

Press PROG. to return to the normal TV screen.

Press POWER to turn on the VCR.

Press PROG..

Setting the Language

PRESET

SET UP

English

Français

Español

PROGRAM

The following screen appears on the TV.

D : PROG

Select the language using PLAY

POWER

VCR

connection (page 11).

Preparation

• Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video

• Press VCR to set the remote control operating the VCR.

100

REW

PLAY

FFREW

PROG.

PLAY, STOP

ENTER

STOP

Optional settings on the SET UP screen

Other optional settings can be made. Press ENTER while “SET UP” is selected on the MENU screen.

The screen turns to the SET UP screen.

Page 22

Page 23

Page 28

To change the language, move down here and set to the desired one.

PRESET

G FRA ESP

SET UP

PROGRAM

on off

120 160 180

GTH

on off

TER MEM

GUAGE E

D : PROG

SAP SET

TAPE LE

COU

To exit, press PROG. twice.

Reference Information

Toshiba 2-5

PREPARATION

To add channels

To erase channels

Channel reference chart

Number on the VCR

Corresponding channel number

CATV STD (HRC/IRC)

CH NUMBER 1 2 3 4 5 6 7 8 9

– 23456789

1(A-8)

234

5(A-7) 6(A-6)

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

10 11 12 13 A B C D E F G H I J K L M N O P Q

31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

R S T U V W AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO

52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71…52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 ––

…

PP QQ RR SS TT UU VV WW XX YY ZZ AAA BBB 65 66 67 68 69 70 71

…

93 94 95 96 97 98 99 100 101 102 103

…

121 122 123 124 125

–––––––––––

…

–––––

93 94 A-5 A-4 A-3 A-2 A-1 100 101 102 103

…

121 122 123 124 125

3)Enter a channel number of 1 to 125 using

number buttons.

For more than 100 number, first press 100.

For CATV channels, refer to the chart below.

(For other orders, check with your cable

company.)

4)Repeat steps 2) and 3) to add or erase

channels as necessary.

5)Press PROG. three times to exit.

Selecting stored channels

Once the active channels have been stored, you

can select the channels in two ways below.

Number buttons

To enter digits of the channel number.

• For one-digit number, enter 0 before.

• For more than 100 number, first press 100.

• Each number button needs to be pressed

within 2 seconds.

CH/TRK buttons

To shift up or down the stored channel numbers.

CATV signals

• STD (standard) cable TV signals

• HRC (Harmonic Related Carriers) cable TV signals

• IRC (Incremental Related Carriers) cable TV signals

IRC is also called ICC (Incremental Coherent Carriers)

Adding or erasing channels

Adding channels

If a desired channel cannot be scanned

automatically because of a weak signal, it can be

added to the memory.

Erasing channels

You can erase a stored channel from the memory

if it is unnecessary.

1)Follow steps 1 to 3 of “Incoming Antenna/

CATV Signals”.

2)Select “ADD CH” or “ERASE CH” using PLAY

or STOP.

D : PROG

SET UP

PRESET

PROGRAM

TV/CATV TV CATV

AUTO SCA

OFF O

ADD CH - - CH

ERASE CH - - CH

TO SET CH PUSH 0~9 KEYS

D : PROG

SET UP

PRESET

PROGRAM

TV/CATV TV CATV

AUTO SCA

OFF O

ADD CH - - CH

ERASE CH - - CH

TO SET CH PUSH 0~9 KEYS

Storing Channels on the VCR

PREPARATION

This section is required if you receive only normal TV or unscrambled cable channels, or use a cable box

between your TV and the VCR.

Incoming Antenna/Cable(CATV) Signals

The VCR scans through all receivable TV and CATV channels and stores only the active

ones in your area into the memory. Once the storing is finished, you can select a desired

channel using CH/TRK.

connection (page 11).

Preparation

• Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video

• Press I.SELECT so that the channel number will appear if “L1” or “L2” is displayed in the VCR display.

PRESET

SET UP

CLOCK SET

CH MEMORY

PROGRAM

Press PROG. to display the MENU screen.

Select “PRESET” using FF or REW,

Number

and press ENTER.

buttons

100

REW

I.SELECT

PLAY

Incoming Antenna/Cable(CATV) Signals

PRESET

ENTER

SET UP

PROGRAM

D : PROG

PLAY, STOP

FFREW

STOP

TV/CATV TV CATV

or STOP, and press ENTER.

Select “CH MEMORY” using PLAY

ENTER

1, 6

OFF

D : PROG

ADD CH - - CH

AUTO SCAN

ERASE CH - - CH

Set “TV/CATV“ to “TV” or “CATV” using FF or REW.

PRESET

SET UP

2 CH on

PROGRAM

AUTO SCA

D : PROG

TV: To store channels received via the antenna.

CATV: To store channels received via the incoming cable.

Select “AUTO SCAN” using PLAY or

STOP, and press FF to set to “ON”.

The VCR starts scanning and the

channels are stored in the VCR in

ascending order. When the scanning is

finished, the screen automatically

returns.

Press PROG. three times to exit.

Reference Information

2-6 Toshiba

PLAYBACK

Adjusting the tracking

When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound

(Digital Auto Tracking).

If the VCR cannot locate the best possible tracking point, hold down one of CH/TRK to adjust the

tracking manually.

Notes

• During the adjusting, the playback picture and sound may be distorted.

• The digital auto tracking is activated only in the playback mode.

• The noise on the screen may not be completely eliminated depending on the tape used, especially when the

tape was recorded on another VCR.

Basic Playback

Load a recorded cassette.

Power is turned on.

If the cassette has no safety tab,

playback starts automatically.

Press PLAY to start playback.

T o stop playback, press STOP.

Rewinding / Fast-forwarding

Press REW or FF in the stop mode.

PLAYBACK

Playback

This section explains the basic playback operation.

Preparation

• Select the video channel (3 or 4) or video input mode on the TV.

• Press VCR to set the remote control operating the VCR.

100

STOP

PLAY

FFREW

CH/TRK

REW

Press PLAY during playback.

A tape runs at double speed

playback.

Double Speed Playback

TIMER

SLP

REC

TIMER

VCR

S L P

TIMER

REC

S L P

VCR

To record again

Cover the tab hole with adhesive tape.

Warning

Do not insert your hands or any foreign objects into the compartment. This may result

Video Cassette Use

PREPARATION

Video Cassette Use

Loading a cassette

Push the cassette into the cassette compartment with the window side facing up and the

label side towards the front. The VCR is automatically turned on. The indicator will

appear in the VCR display.

Ejecting a cassette

Press EJECT. The cassette is ejected from the cassette compartment.

in injury or damage. Take special care with children to avoid accidents.

Precautions when using video cassettes

Video cassettes have a safety tab to prevent accidental erasure. If the tab has already been removed,

recording cannot be performed.

To prevent accidental erasure

Remove this safety tab with a screwdriver.

Avoid extreme humidity, vibrations or shock, strong magnetic fields (near a motor, transformer or

magnet) and dusty place.

• Avoid exposing cassettes to direct sunlight. Keep them away from heaters.

Reference Information

Toshiba 2-7

PLAYBACK

Frame Advance

A picture advances frame by frame.

Press PLAY during still playback.

Each time you press PLAY, the picture advances one frame.

Slow-motion Picture

The tape runs at 1/7th or 1/15th the normal playback speed.

Press SLOW during playback.

The tape runs at about 1/7th the normal playback speed.

Each time you press SLOW, the speed alternates between 1/7th and

1/15th.

To resume normal playback

Press PLAY.

Notes

• The slow-motion picture mode is automatically cancelled after about 5

minutes and returns to normal playback.

• The slow-motion picture may flicker up and down. This is not a defect in the

unit.

Adjusting the Tracking Manually

If the slow-motion picture is noisy, hold down one of CH/TRK until the

best picture is obtained.

Note

The noise in the slow-motion picture may not be eliminated completely.

To resume normal playback

Press PAUSE/STILL.

Picture Search

A tape runs at 5 times or 7 times the normal playback speed so

that you can quickly locate a particular scene.

You can play back a tape at various tape speeds.

Variable Speed Playback

PLAYBACK

Press FF or REW during playback.

The tape runs at 5 times the normal playback speed.

To change the tape speed to 7 times the normal playback

speed, press and hold FF or REW.

If you release it, the tape speed returns to 5 times.

Note

If you press FF or REW during picture search, the mode changes to fast-

forwarding or rewinding.

To resume normal playback

Press PLAY.

PAUSE/STILL

PLAY

REW

FFREW

100

PLAY

SLOW

STOP

Press PAUSE/STILL during playback.

Still Picture

The picture freezes.

A picture freezes so that you can watch closer.

To resume normal playback

Press PAUSE/STILL again.

normal playback.

frozen. This is not a defect in the unit.

Notes

• The still mode is automatically cancelled after about 5 minutes and returns to

• The still picture may shake if a picture of a fast-moving object or scene is

Adjusting Still Picture Stability

If the still picture is distorted or flickers, hold down one of CH/TRK until

the picture becomes stable.

Note

The distortion of the still picture may not be eliminated completely.

Reference Information

2-8 Toshiba

PLAYBACK

On the SET UP screen, select

“COUNTER MEM.” using PLAY or

STOP, and set to “ON” using

REW or FF.

Press PROG. twice to exit.

The memory-stop feature allows you to quickly return to a

counter reading of “0H00M00S” from any point on the tape.

Memory stop is automatically turned on whenever the time

counter with memory is displayed on the TV screen. This is

convenient when you want to watch a segment of the tape

repeatedly. You may also discover other useful application for

this feature.

Notes: If you are rewinding the tape and the VCR stops at

“0H00M00S M”, press REW again to continue

rewinding.

If you press the FF (fast-forward) button and the time

counter never reaches “0H00M00S M” between that

point and the end of the tape, the VCR will continue to

fastforward to the end of the tape.

Memory Stop Feature (Zero Return)

D : PROG

SET UP

PRESET

PROGRAM

TAPE LE

GTH

120 160 180

SAP SET

on off

GUAGE E

G FRA ESP

COU

TER MEM

on off

100

STOP

PLAY

FFREW

REMAIN/

COUNTER

ENTER

STOP

PROG.

PLAY

DISPLAY

COUNT RESET

REW

These functions will help your playback.

Useful Functions in Tape Operation

PLAYBACK

Counter Function

You can view the clock, linear time counter or tape remaining

time in the VCR display or on the TV screen.

→ Linear time counter → Tape remaining time (RT) → Clock

Each time you press REMAIN/COUNTER, the VCR display

changes in sequence as follows:

REMAIN/

COUNTER

100

The indication above will also appear on the TV screen by pressing

DISPLAY. They are switchable with REMAIN/COUNTER.

To reset the linear time counter to “0:00:00”

The counter is automatically reset to “0:00:00” when a cassette is

ejected. If you want to reset at another point, such as the beginning of a

PROG.

ENTER

STOP

PLAY

DISPLAY

COUNT RESET

REW

FFREW

PLAY

STOP

clock.

new recording, just press COUNT RESET.

Notes

• The linear time counter does not work on non-recorded portions on the tape.

• When the tape is ejected or the VCR is turned off, the display changes to

• If the tape rewinds back over “0:00:00”, “–” appears in the VCR display.

• The displayed time of the linear time counter is only an approximation.

PRESET

SET UP

PROGRAM

Turn on the VCR and load a cassette.

Press PROG. to display the MENU screen.

Tape Remaining Time

To view the tape remaining time in the VCR display, select the

tape length beforehand.

Select “SET UP” using FF or REW, and press ENTER.4Select the length of the tape, using

on off

120 160 180

GTH

on off

TER MEM

D : PROG

LAnGUAGE EnG FRA ESP

SAP SET

TAPE LE

COU

FF or REW.

T120: for a T-120 tape or shorter

T160: for a T-140 or T-160 tape

T180: for a T-180 tape

Press PROG. twice to exit.

Press REMAIN/COUNTER.

The remaining time (“RT - : - -”) appears in the VCR display.

Notes

and the cassette type.

• The displayed remaining time is an approximation.

• The remaining time is calculated according to the tape speed (SP or SLP)

Reference Information

Toshiba 2-9

RECORDING

Timer Programming Procedure

Example: To record cable channel 25 in the SP tape speed from

9:30 p.m. until 10:00 p.m. on August 30. Today is August 25.

Load a cassette with the safety tab attached.

Press PROG. to display the MENU screen.

Select “PROGRAM” using FF or

REW, and press ENTER.

Move to the next using FF, and

select the channel number 25 by

pressing number buttons 2 and 5,

PLAY or STOP.

• To record a cable program from the connected cable box:

Enter the cable channel number by number buttons, PLAY or

STOP.

If your cable box is not remote-controllable, choose the desired

channel (1 to 125) on the cable box.

To make corrections:

Press REW to move back to the item, or FF to forward.

(Continued)

Timer Program Recording

The programmable timer allows you to record up to 6 different programs over one month.

Preparation

• Select the video channel (3 or 4) or video input mode on the TV.

• Make sure that the clock is set correctly (page 15).

• Store the channels on the VCR (pages 16 and 17).

• If you record cable channels, finish the cable box set-up (pages 12), and turn on the cable box.

RECORDING

D : PROG

SET UP

PRESET

PROGRAM

CH DATE O

OFF SPD

- - -/-- -:- - -:- - -

D : PROG

SET UP

PRESET

PROGRAM

CH DATE O

OFF SPD

- - -/-- -:- - -:- - -

2 5 -/-- -:- - -:- - SLP

100

STOP

PLAY

FFREW

CANCEL

2, 9

3-8

RECORDING

TIMER

Load a cassette with the safety tab attached.

Press TV/VCR so that the “VCR”

Basic Recording

This section explains the basic recording operation.

Recording a TV Program

box.

Preparation

• Select the video channel (3 or 4) or video input mode on the TV.

• If you record cable channels via the cable box, finish the cable box set-up (pages 12), and turn on the cable

TIMER

REC

S L P

VCR

indicator appears in the VCR display.

REC

S L P

VCR

Select a channel to record with

CHANNEL on the VCR, or CH/TRK

If you see “L1” or “L2” in the VCR display, press I.SELECT so that the

or number buttons on the remote

control.

245

100

FFREW

PLAY

STOP

TIMER

REC

S L P

VCR

channel number of the cable box or “L1” appear, depending on your

connection. (See pages 11 – 12.)

channel number appears.

• If you record cable channels via the cable box, make the output

Press SP/SLP to select the

recording tape speed.

SP: Suitable for general recording with

better picture and sound quality.

SLP: Suitable for tripling recording time, but with less picture and

sound quality than using the SP tape speed.

I.SELECT

To record from other

connected equipment

In step 3, press I.SELECT to

switch the display as follows:

TIMERREC

TIMER

REC

S L P

VCR

Recording off time setting

Press REC on the VCR, or

simultaneously press both REC on

the remote control.

Recording starts.

Press STOP to stop recording.

L1: To record via the LINE IN

1 jacks on the rear panel.

L2: To record via the LINE IN

2 jacks on the front panel.

Watching a TV program while

By setting the recording off time, the recording

recording another

SAP

Hi-Fi

STEREO

L R

TIMER

REC

S L P

stops and the VCR is turned off automatically.

While recording, press simultaneously both REC

on the remote repeatedly to set the desired off

time.

“VCR” indicator.

selector on the TV.

1)While recording, press TV/VCR to turn off

2) Choose another channel using the channel

VCR

Each time you press REC, each half-hour up to

about 4 hours appear cyclically.

Skipping unnecessary scenes while

Notes

• To cancel the recording in progress, press

recording

Press PAUSE/STILL to stop recording

momentarily. To resume recording, press

PAUSE/STILL again.

Note

POWER on the VCR.

The VCR automatically shifts to the stop mode if the

recording pause mode continues for 10 minutes.

Reference Information

2-10 Toshiba

RECORDING

If a power failure occurs during the

timer program recording

• When a power failure has occurred, “- -:- -”

appears in the VCR display. Since the

programmed contents have been cleared,

reset the clock and timer programming.

• When power has failed for a short time, the

colon of the current time display blinks. The

programmed contents are not affected. Reset

the clock.

Overlaps of the programs

If two timer programs overlap, the recording start

time of program 1 has priority over the recording

off time of program 2.

Program 1

(Start time)

Program 2

(Start time)

Overlapped portion

(not recorded)

Confirming the timer programs

Press PROG while timer recording.

The screen for confirming will appear.

This screen can be sure only in the Timer

Recording mode.

Changing/cancelling the timer

programs

1)If the TIMER indicator is lit, turn the VCR on by

pressing POWER.

2)With steps 2 to 9, change the items.

To cancel a program, select the program you

want to cancel in step 4, and press CANCEL.

The line is then cleared.

3)Press POWER to return to the timer standby

mode.

Error indication

The blinking “TIMER” indicator appears in the

VCR display if you press both TIMER when:

–– a cassette is not loaded.

–– the loaded cassette has no safety tab.

In these cases, a recording can not be made.

D : PROG

SET UP

PRESET

PROGRAM

CH DATE O

OFF SPD

- - -/-- -:- - -:- - -

2 5 8/30 9:30 10:00 SP

PRESET

OFF SPD

SET UP

CH DATE O

- - -/-- -:- - -:- - -

2 5 8/30 -:- - -:- - SLP

PROGRAM

- - -/-- -:- - -:- - -

…

SU → WKLY

→ 7/25 →

…

Move to the next using FF, and set

the recording date using PLAY or

STOP.

The date changes as follows:

→ 8/25 → 9/25 →

Timer Program Recording (continued)

PRESET

OFF SPD

SET UP

CH DATE O

- - -/-- -:- - -:- - -

D : PROG

- - -/-- -:- - -:- - -

2 5 8/30 9:30 -:- - SLP

PROGRAM

SA ← WKLY

[WKLYSA]: You can record TV programs on the same

…

[WKLYSU]

channel on the day and time every week.

[MO~FR]: You can record TV programs on the same channel on the

day and time Monday through Friday.

Move to the next using FF, and set

the hour and minutes of the

MO~FR ←

recording start time.

PRESET

OFF SPD

SET UP

- - -/-- -:- - -:- - -

CH DATE O

D : PROG

PROGRAM

Move to the next, and set the

recording off time.

- - -/-- -:- - -:- - -

2 5 8/30 9:30 10:00 SLP

D : PROG

Move to the next, and select the

PRESET

OFF SPD

SET UP

CH DATE O

- - -/-- -:- - -:- - -

2 5 8/30 9:30 10:00 SP

PROGRAM

tape speed (SP) using PLAY or

T o set another program, press FF, and

STOP.

For the tape speed “AUTO (Auto Speed

Select)”, see below.

D : PROG

select the next line pressing STOP.

SAP

Hi-Fi

STEREO

TIMERREC

TIMER

Notes

Repeat steps 4 to 8.

Press PROG..

Now programming is completed.

Press both TIMER simultaneously.

The power turns off and the VCR enters

the timer standby mode.

according to the tape used on the SET UP screen

(page 22).

length is not sufficient to record the program to the

end, the program cannot be recorded to the end.

where the recording tape speed is switched from

• Make sure that the tape length is selected correctly

• When the SLP tape speed is selected and the tape

Auto Speed Select

If you are not sure the tape is long enough for

timer program recording in the SP tape speed,

set the recording tape speed to “AUTO”.

SP to SLP with the Auto Speed Select feature.

• The picture will be distorted when playing the part

Recording starts in the SP tape speed and the

VCR automatically selects the tape speed to

record the program to the end. If the tape length

is not long enough, the tape speed automatically

changes from SP to SLP.

Reference Information

Toshiba 2-11

Setting Control Codes

Press TV to set the remote control operating your TV.

Release PROG.4Point the remote control at your TV and use each button

listed below to make sure that your TV is operated correctly.

POWER To turn the TV on or off.

CH/TRK To select TV channels in the upper or lower

direction.

TV VOL To adjust TV sound level.

I.SELECT To select an external source such as a VCR.

Number buttons To select TV channels. When selecting channels

1 to 9, first enter 0 and then the desired number.

100 To substitute for 100 channel key.

DISPLAY To turn on or off TV’s screen display.

ENTER To use for the TV’s ENTER key.

Important

Some TVs may not respond to all the operations above, or

may not be operated at all with this remote control. In this

case, operate your TV with its own remote control.

Notes

• For some brands, several control codes (brand codes) are allocated. Try

each of them until the buttons work on your TV.

• If you replace the remote control’s batteries, set the brand code again.

Multi Brand Remote Control

The remote control can be compatible with various brands of TV by setting their control codes. The

TOSHIBA code has initially been set to control TOSHIBA TVs.

ADDITIONAL INFORMATION

While holding down PROG. enter the two digits of your TV’s

brand code (listed on page 30) using number buttons.

100

STOP

PLAY

FFREW

100

ENTER

POWER

CH/TRK

TV VOL

DISPLAY

I.SELECT

2, 3

Number

buttons

ADDITIONAL INFORMATION

This VCR can receive or record MTS (Multichannel TV Sound) broadcasts. By connecting the VCR to

your stereo system or stereo TV, you will experience the SAP or stereo sound.

MTS Broadcast Compatibility

RECORDING

Preparation

Connect a stereo TV or stereo system to the AUDIO OUT jacks of the VCR.

PRESET

G FRA ESP

120 160 180

GTH

on off

SAP SET

TAPE LE

or FF.

select “SAP SET” using PLAY or

STOP, and set to “ON” using REW

on off

TER MEM

GUAGE E

D : PROG

COU

SET UP

PROGRAM

On the SET UP screen (page 14),

Recording the SAP/Stereo Broadcast

DISPLAY

100

PLAY

Press PROG. twice to exit.

Perform a recording.

1, 2

FFREW

STOP

R“SAP”“STEREO”

STEREO

Hi-Fi sound track

Contents of recorded sound

track (Mono)

Normal sound

On-Screen Display

(Press DISPLAY.)

SAP (Second Audio Program broadcast):

A separate audio program, usually broadcast in a second language with the

main language.

on the SET UP

screen

A.SELECT

Selecting a sound

Setting of “SAP SET”

Type of receiving

Sounds recorded on the tape

According to your setting of “SAP SET” on the SET UP screen, the sound is recorded onto different

broadcast

tracks of the tape as below. Set “SAP SET” to “ON” or “OFF” appropriately.

“ON” lit not lit MONO MONO SAP

“ON” or “OFF” not lit not lit MONO MONO MONO

“ON” or “OFF” not lit lit MONO (MIXED)

Regular

(monaural audio)

Stereo

“ON” lit lit MONO MONO SAP

“OFF” lit not lit MONO MONO MONO

Regular+SAP

Stereo+SAP

STEREO

Sound output

SAP

“OFF” lit lit MONO (MIXED)

L , R indicators in the VCR display

R (right) is on.

Desired sound

SAP sound

Sounds in playback

You can play SAP and/or stereo broadcasts with this VCR. Press A.SELECT to select a desired sound.

Stereo

Both R (right) and L (left) are on.

Stereo sound

Note

When the TV is connected to the RF OUT terminal of the VCR, the output sound is monaural.

Reference Information

2-12 Toshiba

Brand Code

Pulser 14

Quasar 07, 15

Radio Shack 13

Brand name of your TV

Brand Code

Brand name of your TV

Table of Brand Codes

RCA 02

Toshiba 01

Bell & Howell 09

Carver 10

Celebrity 03

Realistic 09, 11, 13

Runco (NEC) 14

Citizen 12

Curtis Mathes 09, 12

Samsung 11, 12

Dumont 14

Sanyo 09

Electro band 03

Scotch 11

Scott 11

Sears 01, 02, 09, 10, 11

Emerson 09, 11

Fisher 09

GE 02, 07, 11

Sharp 08, 13

Gibralter 14

Sony 03

Soundesign 11

Supreme 03

Sylvania 10

Tandy 08

Technics 07, 15

Techwood 07

Teknika 04, 10, 12

TMK 11

Victor 05

Vidikron 10

Vidtech 11

Wards 10, 11, 13

Zenith 14

Goldstar 11

Hallmark 11

Hitachi 06

Infinity 10

JBL 10

JCB 03

JVC 05

LXI 01, 02, 09, 10, 11

Magnavox 10

Marantz 10

Megatron 06, 11

Memorex 04, 09, 11

MGA 04, 11

Midland 02, 07, 14

Mitsubishi 04, 11

Motorola 08

MTC 12

NAD 01, 11

Nikko 11

Optimus 09

Optonica 08

Panasonic 07, 10, 15

Penney 01, 02, 07, 11, 12

Philco 10

Philips 10

Princeclub 12

Prism 07

Proscan 02

Proton 11

Reference Information

Toshiba 2-13

2-2-1 IC301 (LA71072M)

2-2 IC Blocks

Reference Information

2-14 Toshiba

2-2-2 IC501 (AN3662)

Reference Information

Toshiba 2-15

2-2-3 IC601 (MN101D02X)

Reference Information

2-16 Toshiba

MEMO

OPERATION DESCRIPTION

Toshiba 3-1

3. Product Specifications

Specifications and features are subject to change without notice.

Power supply Power consumption External dimensions Mass Channels received

Antenna input/output terminals Signal system Recording/Playback system

Cassette Tape speed

Video recording/Playback time

Fast forward/Rewind time Video input Video output Audio input Audio output Audio frequency range(Hi-Fi) Audio dynamic range(Hi-Fi) Utilization conditions

120V AC, 60Hz 18W 430 x 94 x 252 mm (W.H.D)

3.0 kg VHF : Channels 2-13

UHF : Channels 14-69 CATV : Channels A7-A1, A-CC, 66-125

UHF/VHF : 75ohm F type connector Standard NTSC Recording : VHS format (SP, SLP)

Playback : VHS format (SP, LP, SLP) Video cassette with VHS mark SLP : 11.1 mm/s,

SP : 33.4 mm/s SLP : 480 minutes,

SP : 160 minutes (When T-160 video cassette is used.) Within approx. 120 s (When T-120 video cassette is used.) 1V(p-p), 75 ohm, unbalanced, negative sync., pin jack 1V(p-p), 75 ohm, unbalanced, negative sync., pin jack Line input : 308 mV(rms), more than 47 Kohm, pin jack Line input : 308 mV(rms), more than 47 Kohm, pin jack 20Hz - 20KHz 68dB Temperature : 5°C to 40°C

Humidity : less than RH 80%

Product Specifications

3-2 Toshiba

MEMO

Toshiba

4-1

4. Disassembly and Reassembly

4-1 Cabinet Assembly

4-1-1 Cabinet Top Removal

Œ REMOVE 2 SCREWS

´ Lift up the Cabinet Top in the direction of

arrow by releasing the Hook.

Fig. 4-1 Cabinet Top Removal

4-1-2 Ass’y Front Panel Removal

Disconnect the CN701 from the Main PCB and then lift the Jack PCB up.

CN701

CN703

Disconnect the CN703 from the Main PCB and then lift the Key PCB up.

Fig. 4-2 Ass’y Front Panel Removal

4-1-3 Jack PCB/Key PCB Removal

Fig. 4-3 Jack PCB/Key PCB Removal

Œ RELEASE 4 HOOKS

´ RELEASE 2 HOOKS

(Top View)

(Bottom View)

4-2

Toshiba

Disassembly and Reassembly

4-1-4 Chassis Removal

¨ REMOVE 3 SCREWS

ˆ LIFT THE ASS'Y FULL DECK UP.

Œ REMOVE 2 SCREWS

´ REMOVE BRACKET-FRAME

ˇ REMOVE 2 SCREWS

Ø LIFT THE ASS'Y MAIN PCB UP TO REMOVE.

MODE SWITCH

ASSEMBLY POINT

When installing the ass'y full deck on the Main PCB, be sure to align the assembly point of mode switch.

Fig. 4-4 Chassis Removal

Toshiba

4-3

4-2 Deck Parts Locations

4-2-1 Top View

∏

Fig. 4-5 Top parts Location-1

Œ BRACKET FL TOP (Optional) ´ GEAR FL CAM ˇ MOTOR LOADING ASS’Y ¨ LEVER FL ARM ASS’Y ˆ HOLDER FL CASSETTE ASS’Y Ø LEVER FL DOOR ∏ SLIDER FL DRIVE

+ 64 hidden pages