Operating Instructions
азлнкмдсаь ий щдлигмДнДсаа
COMBINATION 21" FLAT COLOR TELEVISION
AND VIDEO CASSETTE RECORDER
21"/54 ТП игйлдйщдкДззхв сЗЦнзйв
нЦгЦЗабйк а ЗаСЦйеДЙзанйойз З йСзйе
дйкимлЦ (ейзйЕгйд)
VTV21FL3
ENGLISH
кмллдав
If you purchase a universal remote control from your local retailer, please
contact the remote manufacturer for the required programming code.
ЦТОЛ ‚˚ ФЛУ·eОЛ ЫМЛ‚eТ‡О¸М˚И ФЫО¸Ъ ‰ЛТЪ‡МˆЛУММУ„У ЫФ‡‚ОeМЛfl, ‰Оfl ФУОЫe˜МЛfl
ТУУЪ‚eЪТЪ‚Ы˛˘Лı ЫФ‡‚Оfl˛˘Лı НУ‰У‚ У·‡˘‡ИЪeТ¸ Н ФУЛБ‚У‰ЛЪeО˛ ФЫО¸Ъ‡.
Before operating the unit, please read this manual thoroughly.
иВВ‰ ЛТФУО¸БУ‚‡МЛВП ЫТЪУИТЪ‚‡, ФУК‡ОЫИТЪ‡, ‚МЛП‡ЪВО¸МУ ФУ˜ЛЪ‡ИЪВ ˝ЪЫ ЛМТЪЫНˆЛ˛.
NTSC
5960101B cov-inE 25/07/2001, 16:121
ATTENTION
ЗзаеДзаЦ
ENGLISH
IMPORTANT
Unauthorized recording of copyright television programs, films, video tapes and other materials
may infringe copyright laws.
WARNING
To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
MAINS SUPPLY
This unit is designed to operate from AC 110-240V 50/60Hz household mains supply.
HQ
This TV/VCR is equipped with HQ (High Quality) recording capability. A built-in detail enhancer is used to
boost the recorded signal for cleaner, sharper images and maximum picture playback.
5960101A cov-inE 21/06/2001, 20:262
FEATURES
• Flat Color TV with Video Cassette Recorder
• HQ(High Quality)
• Infrared TV/VCR Remote Control
• 1 Month, 8 Programs Timer
• One-Touch Timer Recording (OTR)
• 30 Minutes Back Up
• Real Time Tape Counter
• NTSC Playback/ Recording
• On-Screen Programming
• Picture Control Adjustments
• TV Monitor
• Video Index Search System
• Digital Auto Tracking
• Auto Head Cleaning
• Programmable ON/OFF Timer
• Auto Power On/Auto Play
• Auto Rewind/Auto Eject
• Dual Picture Search
• 2 Speed (SP/LP) Record/Playback
• On Screen 2 Languages Display
• Programmable TV Sleep Timer
• Auto Repeat Play
CONTENTS
PREPARATION
PRECAUTIONS .................................................................................................................................................... 2
LOCATION OF CONTROLS................................................................................................................................. 4
REMOTE CONTROL ............................................................................................................................................ 5
ANTENNA CONNECTIONS ................................................................................................................................. 7
POWER SOURCE ................................................................................................................................................ 7
TV OPERATION
ON-SCREEN LANGUAGE SELECTION ...............................................................................................................8
TUNING THE TV CHANNEL ................................................................................................................................. 9
TO SET THE CLOCK...........................................................................................................................................12
TV OPERATION ..................................................................................................................................................13
PICTURE CONTROL ADJUSTMENTS ...............................................................................................................15
TO SET THE ON TIMER .....................................................................................................................................17
TO SET THE OFF TIMER....................................................................................................................................18
ENGLISH
PLAYBACK
LOADING AND UNLOADING THE VIDEO CASSETTE TAPE ...........................................................................19
PLAYBACK ..........................................................................................................................................................20
SPECIAL PLAYBACK..........................................................................................................................................21
RECORDING
RECORDING A TV PROGRAM...........................................................................................................................23
TIMER RECORDING...........................................................................................................................................25
OTHER FUNCTIONS FOR TIMER RECORDING...............................................................................................27
ONE-TOUCH TIMER RECORDING (OTR) .........................................................................................................29
OTHER FUNCTIONS
USING THE REAL TIME TAPE COUNTER ........................................................................................................30
USING ZERO RETURN.......................................................................................................................................31
VIDEO INDEX SEARCH SYSTEM (INDEX)........................................................................................................32
DUPLICATING A VIDEO TAPE...........................................................................................................................33
NTSC RECORDING ............................................................................................................................................34
BEFORE REQUESTING SERVICE.....................................................................................................................35
RECEPTION DISTURBANCE .............................................................................................................................37
SPECIFICATIONS ...............................................................................................................................................38
5960101A 01-05E 21/06/2001, 20:261
1
PRECAUTIONS
MOISTURE CONDENSATION
If the unit is suddenly moved from a cold place to a warm place, moisture may form inside
the unit. In this case, do not operate it for two to three hours.
WHAT IS MOISTURE CONDENSATION?
When cold water is poured into a glass, for, example, water vapor in the air will condense on the surface of
the glass. This is called moisture condensation.
MOISTURE WILL CONDENSE ON THE UNIT IN THE FOLLOWING CASES;
• When you move this TV/VCR from a cold to a warm place.
• After heating a cold room or under extremely humid conditions.
WHEN YOU EXPERIENCE THE ABOVE CONDITIONS,
Plug the power cord into an AC outlet, press the POWER button to turn on and leave the unit at room
temperature until moisture condensation disappears.
Depending on the surrounding conditions, this may take two or three hours.
Head Drum
Video Tape
Under certain conditions, such as low humidity or walking across wool carpet, you may experience
a static discharge when touching the TV/VCR. If this happens and it fails to function, follow the
procedure below.
1)
Unplug the TV/VCR from the AC outlet.
2)
Wait for static charge to disappear, this may
take two to three hours.
3)
Re-plug the unit again.
Do not place the unit on or near appliances
which may cause electromagnetic interference
e.g. TV or hi-fi speakers, etc. Doing so may
affect operation of unit causing erratic playing
or recording, picture or sound distortion, or
noise.
Avoid extreme heat and cold.
2
5960101A 01-05E 21/06/2001, 20:262
Avoid extreme moisture and dust.
The ventilation holes prevent overheating.
Do not block or cover these holes. Especially
avoid covering the holes with soft materials
such as cloth or paper.
ENGLISH
Do not insert fingers or any other objects into
the cassette loading slot. Do not spray
cleaner or wax directly on the unit or use
forced air to remove dust.
Keep the unit away from flower vases, sink etc.
Liquids spilled into the unit can cause serious
damages. Switch OFF the Power Supply to the
unit and consult a qualified service personnel
before attempting to use the unit again.
When you leave your home for a long period of
time, unplug the AC power cord.
Place the unit on a flat, stable, level surface,
and never subject it to violent shaking or any
other shock or impact.
When you finish operating the unit, always
unload the cassette and turn off the power.
To protect the unit during a thunder storm,
unplug the AC power cord from the wall outlet
and disconnect the antenna.
5960101A 01-05E 21/06/2001, 20:263
3
LOCATION OF CONTROLS
REARFRONT
1
54 6
3
2
MAIN
POWER
POWER
STANDBYTIMER REC
REC/OTR
10 1211 13
7 8
STOP/
EJECT
REW PLAY CHANNEL
VOLUMEREC/OTRFF
149
LINEIN 2
VIDEO AUDIO
15
DESCRIPTION OF CONTROLS
FRONT:
1. Cassette Loading Slot - To insert or remove a
video tape.
2. POWER Button - Press to turn the TV/VCR on or off.
3. Remote Sensor - Signals from the Remote Control
are received here.
4. STANDBY Indicator - Lights up when the Main
Power switch is turned on.
5. TIMER REC Indicator - Lights up when the TIMER
REC button is pressed.
6. STOP/EJECT Button - Press once to stop the tape
in any mode. Press again to eject the tape.
7. F.F (Fast Forward) Button - In the Stop mode, this
button rapidly winds the tape forward. In the Play
mode, this button activates forward search.
8. VOLUME
volume of the sound.
9. Main Power switch - Turn the TV/VCR power on or
off completely.
10. REC/OTR Indicator - Lights up when the TV/VCR
is recording.
11. REW (Rewind) Button - In the Stop mode, this
button rapidly winds the tape backwards. In the Play
mode, this button activates reverse search.
12. PLAY Button - Press to play a prerecorded tape.
/ Buttons - Press to raise or lower the
4
IN
OUT
AUDIO
AUDIO
VIDEO
VIDEO
17 18 19 20
PHONES
16
13. REC/OTR Button - Press once to start normal
recording. Additional presses activate One-T ouch Timer
Recording.
14. CHANNEL
/ Buttons - Press to select a
channel for viewing or recording.
15. AUDIO/VIDEO IN Jack (LINE IN 2)- A udio and video
signal cables from an external source can be
connected here.
16. PHONES socket - Plug monaural headphones or
an earphone with a 3.5 mm miniplug into this
socket for private listening.
REAR:
17. AUDIO/VIDEO OUT Jacks - Used to output audio
and video signals to a TV, amplifier or VCR.
18. AUDIO/VIDEO IN Jacks - Audio and video signal
cables from an external source can be connected
here.
19. VHF/UHF Antenna Socket - Connect the 75 ohm
coaxial cable from the antenna or Cable TV service
to this jack.
20. AC Power Cord - Connect to AC outlet.
5960101A 01-05E 21/06/2001, 20:264
REMOTE CONTROL
1
2
3
4
5
6
7
8
CALL 0 / AV MUTE
COUNTER
RESET
PROGRAM
MENU PAUSE/STILL
EJECT
SLEEP
879
0
ZERO
INDEX
RETURN
SP/LP
ENTER
PLAY
STOP
REC/OTR
ON/
STANDBYTV MONI.
321
CH/TRK
654
VOLUME
AUTO
TRACKING
CANCEL
9
10
11
12
FFREW
13
TIMER
REC
14
DESCRIPTION OF CONTROLS
1. ON/STANDBY Button - Press to turn the TV/VCR
on. Press again to turn the TV/VCR off.
2. Direct Channel Selection Buttons (0-9) - Allows
direct access to any channel.
3. CALL Button - Displays the present time/day of the
week, channel, counter, speed selection (and VCR
mode if VCR is operating) on the TV screen.
4. ZERO RETURN Button - Used to stop the tape
when the counter reaches 00:00:00.
5. SP/LP Button - Sets the tape speed for recording.
6. REW (Rewind) /
this button rapidly winds the tape backwards. In the
Play mode, this button activates reverse search.
Used to set or adjust in the menu mode.
7. MENU Button - Press to display the On-Screen
menu function.
8. REC/OTR Buttons - Press both buttons at the
same time once to start normalrecording. Additional
presses activate One Touch Timer Recording.
9. CH/TRK
/ - Press the button to change a
higher numbered channel set into memory. Press
button to change to a lower numbered
the
channel set into memory. During playback, they are
used to adjust tracking manually.
10. MUTE Button - Press to turn off the sound. Press
again to turn the sound back on.
11. AUTO TRACKING Button -
tracking to minimize picture noise during playback.
12. CANCEL Button - Used to clear the selected
program and to move the cursor backward.
Button - In the Stop mode,
Automatic adjustment of
15
16
17
18
CALL 0 / AV MUTE
COUNTER
RESET
PROGRAM
19
20
MENU PAUSE/STILL
EJECT
21
13. FF /
rapidly winds the tape forward. In the Play mode,
this button activates forward search. Used to set or
adjust in the menu mode.
14. PAUSE/STILL Button - During recording, this button
temporarily stops the tape. During playback, it stops
the tape and displays a still image on the TV screen.
15. TV MONI. Button - Used to temporarily view a TV
Button - In the Stop mode, this button
SLEEP
879
0
ZERO
INDEX
RETURN
SP/LP
ENTER
PLAY
STOP
REC/OTR
ON/
STANDBYTV MONI.
321
CH/TRK
654
VOLUME
AUTO
TRACKING
CANCEL
22
23
24
25
FFREW
TIMER
REC
26
channel selected on the TV/VCR while in the
playback mode.
16. AV Button - Select input signal source when
recording from an external unit.
17. COUNTER RESET Button - Used to reset the
counter to 00:00:00.
18. PROGRAM Button - Press to confirm the programmed timer recording and ON/OFF timer.
19. PLAY/
Button - Press to play a prerecorded
tape. Used to set or adjust in the menu mode.
20. STOP /
Used to set or adjust in the menu mode.
21. EJECT Button - Press to eject the tape.
22. SLEEP Button - Sets the TV to turn off automatically
after up to 120 minutes.
23. VOLUME
increase, or the
level.
24. INDEX Button - Used to search for the INDEX mark.
25. ENTER Button - Use to enter information in the
menu mode.
26. TIMER REC Buttons - Used to set the TV/VCR to
start recording at a preset time.
Button - Press once to stop the tape.
▲ / ▼ Buttons - Press the ▲ button to
▼ button to decrease the volume
ENGLISH
5960101A 01-05E 21/06/2001, 20:265
5
REMOTE CONTROL (CONTINUED)
BATTERY INSTALLATION
Slide the battery compartment
cover in the direction of the
arrow.
Install two "AAA" batteries
(supplied), paying attention to
the polarity diagram in the
battery compartment.
BATTERY CAUTIONS
• Use two "AAA/R03/UM-4" size penlight batteries for the remote control handset.
• The batteries may last approximately one year depending on how much the remote control is used. For best
performance it is recommended batteries be replaced on a yearly basis, or when remote operation becomes
erratic.
• Do not mix old and new batteries.
• Weak batteries can leak and severely damage the remote control transmitter. Always remove batteries as
soon as they become weak.
Replace the compartment
cover.
REMOTE CONTROL OPERATION
The following cases, the remote control may not operate:
• When there is an obstacle between your TV/VCR and the
remote control.
• If you try to operate your TV/VCR from a distance greater
than 5 metres.
• If you try to operate your TV/VCR away from the normal
viewing angle (over 30˚ either side of the remote sensor).
5m
NOTE: When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the
remote sensor, the remote control operation may be unstable.
6
5960101A 06-10E 21/06/2001, 20:276
ANTENNA CONNECTIONS
AUDIO
IN
OUT
VIDEO
VIDEO
AUDIO
Connect an outdoor antenna to the antenna socket at the rear panel as shown below.
For all antenna circuit problems, please consult your local dealer.
ENGLISH
EXTERNAL ANTENNA
The type of antenna required depends on the position of your home, it's distance from the transmitter and local
interference. If you do not have an antenna and you are uncertain of what to buy, you should seek the advice of
a local antenna contractor.
POWER SOURCE
TO USE AC POWER
Use the AC line cord provided for operation on AC. Insert the AC
cord plug into 110-240V, 50/60Hz AC outlet.
After you have connected the Antenna and Power source, you
must check that your TV/VCR is properly installed.
Press MAIN POWER switch on the front panel, the red standby
indicator will light. Turn on your TV/VCR by pressing POWER (ON/
STANDBY) on the front panel or on the remote control, the red
standby indicator goes off.
5960101A 06-10E 21/06/2001, 20:277
AC Outlet
7
MENU
PAUSE/STILL
TIM
E
R
R
EC
R
EC
/O
TR
E
JE
CT
PR
O
G
R
A
M
S
P/LP
CALL O / AV MUTE
SLEEP
CH/TRK
ON/
STANDBY
TV MONI.
VOLUME
E
N
TE
R
C
AN
C
E
L
IN
D
E
X
A
U
TO
TR
A
C
K
IN
G
C
O
U
N
TE
R
R
E
SE
T
Z
E
R
O
R
ET
U
R
N
FF
REW
STOP
PLAY
0
8
7
9
6
5
4
3
2
1
ON-SCREEN LANGUAGE SELECTION
CLOCK SET
COLOUR SYSTEM AUTO
SYSTEM SETUP
EXIT
ENTER
SELECT
: MENU
: ENTER
:
STOP
PLAY
The on-screen menu can display two langages, English or Russian.
• Make sure that the MAIN POWER
switch on the front panel is pushed
in (ON).
(The STANDBY indicator lights up.)
• Press the ON/STANDBY button to
turn on the TV/VCR.
(The STANDBY indicator goes off.)
123
1 4
Press the MENU button.
PLAY
STOP
or button to
TIMER REC SET
VCR SETUP
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT
ENTER
EXIT
Press the
select the SYSTEM SETUP
mode. Then press the
ENTER button.
MENU
ENTER
:
: ENTER
: MENU
Press the
or button to
select the LANGUAGE mode.
Then press the ENTER button.
ENTER
Press the
language. Then press the ENTER button.
PLAY
STOP
NOTE: When you plug the AC mains lead into the mains socket for the first time the MENU screen at the step 1 or
step 2 will be skipped and move to the language selecting screen at the step 3. But this is not a fault, please
select the language at first before operating this unit.
8
5960101A 06-10E 21/06/2001, 20:278
or button to select the desired
ENTER
LANGUAGE/
SELECT OK : ENTER:
Press the MENU button to return to normal TV
screen.
MENU
TUNING THE TV CHANNELS
MENU
Before you can view a television station it must be set in your television memory.
This TV/VCR can receive up to 110 channels by presetting channels into memory.
AUTO TUNING
Press the MENU button.
MENU
Press / button to select
the CHANNEL SETUP mode,
then press the ENTER button.
PLAY
ENTER
Press / button to select
the AUTO TUNING mode,
then press the ENTER button.
PLAY
ENTER
ENGLISH
STOP
2 3
R
E
MENU
S
REC/OTR
1 5
The Auto Tuning will start and begin memorizing
all the channels in sequence available in your
area.
This will take approximately 4 minutes.
EJECT
TIMER
REC
TIMER REC SET
VCR SETUP
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT
ENTER
EXIT
W
T
O
P
PROGRAM
PLAY
PAUSE/STILL
: ▲ ▼
: ENTER
: MENU
COUNTER
RESET
F
F
STOP
TV MONI.
SLEEP
1
4
2
7
5
CALL
O / AV
0
ZERO
RETURN
SP/LP
INDEX
ENTER
CANCEL
3
8
6
CH/TRK
9
MUTE
VOLUME
TRACKING
AUTO
STANDBY
ON/
CHANNEL SETUP
CH TUNING
AUTO TUNING
CH ALLOCATION
SELECT
ENTER
EXIT
2 3
When the Auto Tuning is finished, the CHANNEL
SETUP screen will appear. Then press the
MENU button to return to the normal screen.
: ▲▼
: ENTER
: MENU
5960101A 06-10E 21/06/2001, 20:279
AUTO TUNING
CHANNEL SETUP
CH TUNING
AUTO TUNING
CH ALLOCATION
SELECT : ▲▼
ENTER : ENTER
EXIT : MENU
9
M
E
N
U
P
A
U
S
E
/S
T
IL
L
T
IM
ER
R
E
C
R
EC
/O
TR
E
JEC
T
PROGRAM
SP/LP
C
A
L
L
O
/ A
V
M
U
T
E
S
L
E
E
P
C
H
/T
R
K
O
N
/
S
T
A
N
D
B
Y
T
V
M
O
N
I.
V
O
L
U
M
E
ENTER
CANCEL
INDEX
AUTO
TRACKING
COUNTER
RESET
ZERO
RETURN
F
F
R
E
W
S
T
O
P
P
L
A
Y
0
8
7
9
6
5
4
3
2
1
TUNING THE TV CHANNELS (CONTINUED)
TO EXCHANGE THE TV STATIONS TO ANOTHER CHANNEL POSITION
EXAMPLE : Exchange the TV stations between position 4 and 6.
Press the MENU button.
Press
the CHANNEL SETUP mode,
then press the ENTER button.
MENU
/ button to select
PLAY
STOP
TIMER REC SET
VCR SETUP
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT
: ▲ ▼
ENTER
: ENTER
EXIT
: MENU
1
5
1
ENTER
4
Press / button to select
the CH ALLOCATION mode,
then press the ENTER
button.
PLAY
STOP
ENTER
CHANNEL SETUP
CH TUNING
AUTO TUNING
CH ALLOCATION
SELECT : ▲▼
ENTER : ENTER
EXIT : MENU
43
Press / or number button
to select the TV station to be
moved. Then press the ENTER
button.
PLAY
STOP
ENTER
CH ALLOCATION CH 1
: ▲▼/ 0-9SET
OK : ENTER
EXIT : MENU
1 3 5
CH 4
Press / or number button to select the
position number which the selected TV station
is to be moved.
PLAY
STOP
10
5960101A 06-10E 21/06/2001, 20:2710
Press the ENTER button.
ENTER
CH 4
CH ALLOCATION CH 6
: ▲▼/ 0-9SET
OK : ENTER
EXIT : MENU
Press the MENU button to return
to the normal screen.
MENU
CH ALLOCATION CH 4
: ▲▼/ 0-9SET
OK : ENTER
EXIT : MENU
CH 6
M
E
N
U
P
A
U
S
E
/S
T
IL
L
TIMER
REC
REC/OTR
EJECT
PROGRAM
SP/LP
C
A
L
L
O
/ A
V
M
U
T
E
S
L
E
E
P
C
H
/T
R
K
O
N
/
S
T
A
N
D
B
Y
T
V
M
O
N
I.
V
O
L
U
M
E
ENTER
CANCEL
INDEX
AUTO
TRACKING
COUNTER
RESET
ZERO
RETURN
FF
REW
STO
P
P
L
A
Y
0
8
7
9
6
5
4
3
2
1
In certain areas of the countries which have poor reception the Automatic Tuning System may not tune your TV/VCR
CH 1
D/K
OKCH: ENTER
: / 0-9
EXIT : MENU
MENU
to the strongest broadcast signal. If you are not satisfied with the automatic tuning you may manually tune your TV/
VCR.
MANUAL TUNING
Press the MENU button.
Press the
or button to select the CHANNEL
SETUP mode, then press the ENTER button.
PLAY
ENTER
Press the or button to select the CH TUNING
mode, then press the ENTER button.
PLAY
ENTER
ENGLISH
STOP
4
1
Press the button to search up the waveband or
button to search down the waveband. Each time
a station is found the search will stop. Press
button to continue searching until the station you
want is found, then press ENTER button to store the
station you have selected.
FFREW
TIMER REC SET
VCR SETUP
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT
: ▲ ▼
ENTER
: ENTER
EXIT
: MENU
ENTER
If you cannot get a clear picture,
press the
picture becomes clear.
When you have a clear crisp
picture store this setting by
pressing ENTER button.
or button until the
SEARCH : / F.TUNE:
EXIT : MENU
3
CH 1
B/G
or
STOP
CHANNEL SETUP
CH TUNING
AUTO TUNING
CH ALLOCATION
SELECT
: ▲▼
ENTER
: ENTER
EXIT
: MENU
1
1
Press the or button to select B/G or D/K when it
flashes and press ENTER button. Press the
to select your required channel number (1-110) when
channel number flashes. Press ENTER button to store the
channel number. The TV/VCR channels can be preset to
different TV broadcast channels at anytime simply repeat
steps 3-4.
PLAY
STOP
When all required stations have
been set, press the MENU button
to return to normal TV screen.
ENTER
4
MENU
4
or button
NOTE: TO SKIP A CHANNEL
To skip unnecessary channels when you press the CH/TRK button, select the channel you want to skip. Then
press the CANCEL button so that the channel number flashes.
To cancel the skip setting, select the skipped channel using the Direct Channel Selection buttons, then press
the CANCEL button.
5960101A 11-16E 21/06/2001, 20:2711
11
TO SET THE CLOCK
CLOCK SET
DAY
MONTH
YEAR
TIME
26 WED
1
2000
0:00
EXIT
SET
SELECT
: MENU
:/ 0-9
OK
:
: ENTER
CLOCK SET
DAY
MONTH
YEAR
TIME
26 FRI
10
2001
11: 30
EXIT
SET
SELECT
: MENU
:/ 0-9
OK
:
: ENTER
FFREW
You will be unable to use your TV/VCR properly unless the time and date is set and keeping time correctly. Please
note that you will be unable to select TIMER REC SET or ON/OFF TIMER SET from the main menu until you have
set the CLOCK.
EXAMPLE: Setting the clock to 11:30, 26th October, 2001.
Press the MENU button.
Press the
or button to
select the SYSTEM SETUP
mode, then press the ENTER button.
MENU
ENTER
TIMER REC SET
VCR SETUP
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT
:
ENTER
: ENTER
EXIT
: MENU
PLAY
STOP
1 2
1
4
3
Press the or button to
select the CLOCK SET mode,
then press the ENTER button.
PLAY
STOP
REW
MENU
STOP
R
E
C
E
/
O
J
T
E
R
C
T
T
IM
R
E
C
SYSTEM SETUP
CLOCK SET
COLOUR SYSTEM AUTO
SELECT
ENTER
EXIT
P
R
O
G
R
A
M
PLAY
FF
PAUSE/STILL
E
R
ENTER
:
: ENTER
: MENU
C
O
U
R
N
E
T
S
E
E
R
T
S
P
/L
P
CALL
R
Press the
or button
to select the current day,
then press the
TV MONI.
SLEEP
1
4
2
7
5
8
O / AV
0
9
Z
E
E
MUTE
R
T
O
U
R
N
VOLUME
IN
D
E
X
E
N
T
T
A
R
E
U
R
A
T
C
O
K
IN
G
C
A
N
C
E
L
STANDBY
ON/
3
6
CH/TRK
button.
STOP
1 2 5
3 4 5
Set the month, year and hour in the same way as
in step 3.
FFREW
NOTES:
During a power failure or disconnection of the mains lead the clock and all its programmed setting will
•
remain in the memory for 30 minutes. If the power failure is longer than 30 minutes you will have to reset the
present time.
If you want to correct the digits while setting, press the
•
the
or button to correct the desired setting.
12
5960101A 11-16E 21/06/2001, 20:2712
STOP
CLOCK SET
SELECT
SET
OK
DAY
MONTH
YEAR
TIME
:
:/ 0-9
: ENTER
26 FRI
10
2001
11: 30
EXIT
: MENU
Press or button to select current minute,
then press the ENTER button.
The time and day will be displayed.
FFREW
ENTER
button until the item you want to correct, then press
TV OPERATION
CH/TRK
Press the ON/STANDBY
button to turn on the TV/
VCR.
ON/
STANDBY
2
Select channels either with the Direct Channel Selection buttons or
with the CH buttons.
To select with the Direct
channel selection buttons:
Press the one of keys
1-9:
1-9 as required.
Press the two or three
10-110:
digits in order from left
○○○○○○○○○○○○○○○○
To select with the CH buttons:
Press and release the CH
button. The channel changes one
by one. Hold the button down to
scan through unwanted channels.
/
ENGLISH
to right.
2
1
T
V
M
O
N
I.
S
L
E
1
E
4
7
C
A
L
L
C
8
O
U
R
N
O
E
T
S
/ A
E
E
R
T
P
R
O
G
R
REW
P
M
E
N
U
R
E
C
E
/O
J
T
E
R
C
T
L
STOP
P
A
U
S
E
/S
T
IL
T
IM
R
E
E
R
C
V
0
Z
R
E
E
R
A
T
O
M
U
R
N
S
P
I
/L
N
P
D
E
X
E
N
T
T
E
R
C
A
FF
A
N
Y
L
C
E
L
P
2
5
9
M
U
T
E
V
O
L
A
R
U
A
T
C
O
K
IN
G
S
O
T
N
A
/
N
D
B
3
6
U
M
E
Y
C
H
/T
R
K
2
3
The VOLUME can be adjusted to a desired level by pressing the VOLUME ▲ or ▼ button. The VOLUME level
is represented by a green bar on the screen.
VOLUME
VOLUME 32
NOTE: If the station being viewed stops broadcasting, the TV will shut off after 15 minutes.
13
5960101A 11-16E 21/06/2001, 20:2713
SLEEP
120
TV OPERATION
(CONTINUED)
CALL
Press the CALL button. The current time, channel
number, real time tape counter and tape operation will
be indicated.
Press CALL button again to disappear the call display.
Current time
CALL
11 : 30 SAT
CH 2
01 : 30 : 21 SP
Real Time Tape Counter
VCR operation
Channel No.
Auto Repeat
Tape In
Tape Speed
MENU
REC/OTR
EJECT
MUTE
To cut off the sound, press this button once. The TV/
VCR will be silenced and the symbol "MUTE" will appear
on the screen. The muting can be released by pressing
the MUTE button again or the VOLUME
MUTE
TV MONI.
SLEEP
1
4
2
7
5
CALL
COUNTER
8
RESET
PROGRAM
R
E
W
S
T
O
P
PAUSE/STILL
TIMER
REC
O / AV
0
9
ZE
RETURN
MUTE
RO
SP/LP
PLAY
F
F
VOLUME
IN
DE
X
ENTER
TRACKING
AUTO
CANCEL
STANDBY
ON/
3
6
CH/TRK
▲/▼ buttons.
MUTE
SLEEP
To set the TV to turn off at a set time, press the SLEEP button on the remote control. The clock will count down
10 minutes each time the button is pressed in the order of 120, 110.....20, 10, 0. After the sleep time is
programmed, the display will disappear and will reappear every 10 minutes. To confirm the sleep time setting,
press the SLEEP button once and the remaining time will be a momentarily displayed. To cancel the sleep
time, press the SLEEP button repeatedly until the display turns to 0.
SLEEP
NOTE: If the SLEEP button is pressed when the TV/VCR is the REC mode, the clock will count down and the picture
will shut off at the set time, but the recording continues.
14
5960101A 11-16E 21/06/2001, 20:2714
PICTURE CONTROL ADJUSTMENTS
ON/OFF TIMER SET
PICTURE
TV SETUP
EXIT
ENTER
SELECT
: MENU
: ENTER
:
The picture setting have been factory adjusted under optimum signal reception. However, conditions may not be the same
in your area. After tuning in the TV/VCR, allow it to warm up for a few minutes. If the picture is not to your liking, make the
following adjustments using the remote control.
Press the MENU button.
Press the
or button to select the TV SETUP
mode, then press the ENTER button.
MENU
PLAY
STOP
ENTER
TIMER REC SET
VCR SETUP
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT
:
ENTER
: ENTER
EXIT
: MENU
1 2
41
Press the
or button to select the PICTURE
mode, then press the ENTER button.
ENGLISH
PLAY
STOP
T
V
M
O
N
I.
S
LE
1
E
4
7
C
A
L
L
COUNTER
8
RESET
O
/ A
PROGRAM
R
EW
M
E
N
U
REC/OTR
EJECT
PLAY
S
TO
FF
P
P
A
U
S
E
/S
T
IL
TIMER
REC
V
0
ZERO
RETURN
SP/LP
INDEX
ENTER
TRACKING
CANCEL
L
P
2
5
3
6
C
H
/T
9
R
M
U
T
AUTO
K
E
V
O
L
U
M
E
ENTER
S
O
T
N
A
/
N
D
B
Y
1 2 3
3
Press the ENTER button until your desired
PICTURE mode appears e.g. brightness, contrast,
color, or sharpness. Then press the
or
After finishing the adjustment, press the MENU
button to return to normal TV screen.
button to adjust the PICTURE. (See the next page
for detail.)
MENU
ENTER
FFREW
BRIGHTNESS 0
SET
:
: CANCEL
RESET
: ENTER
NEXT
EXIT : MENU
NOTE: To resume the normal picture adjustment, press the CANCEL button, while in the picture mode menu.
5960101A 11-16E 21/06/2001, 20:2815
15
PICTURE CONTROL ADJUSTMENTS
NEXT
RESET
SET
: ENTER
EXIT : MENU
: CANCEL
:
CONTRAST 0
NEXT
RESET
SET
: ENTER
EXIT : MENU
: CANCEL
:
COLOUR 0
FFREW
Each time you press the ENTER button, the picture adjustment Screen changes as follows.
BRIGHTNESS
Press the ENTER button until "BRIGHTNESS"
appears on the screen, then press the
to adjust the brightness. When the
the darker portions of the picture become lighter.
ENTER
BRIGHTNESS 0
SET
RESET
NEXT
:
: CANCEL
: ENTER
EXIT : MENU
or button
button is pressed,
FFREW
Press the ENTER button until "CONTRAST" appears on
the screen, then press the
contrast. Pressing the
and enhance the color. Picture looks sharper in the daytime
by increasing the contrast level and sharper at night by
lowering the contrast level.
ENTER
CONTRAST
(CONTINUED)
or button to adjust the
button improves the contrast
FFREW
TINT
Press the ENTER button until "TINT" appears on the
screen, then press the
tint of the picture.This determines how accurately the
colors are reproduced by the TV.Adjusting the tint for
natural facial tone is the best method of obtaining
accurate color reproduction of the entire picture.
ENTER
or button to adjust the
FFREW
TINT 0
SET
RESET
NEXT
:
: CANCEL
: ENTER
EXIT : MENU
Press the ENTER button until "COLOUR" appears on the
screen, then press the
intensity of the colors.
This should be set to where the colors appear normal in
intensity and brilliance.
ENTER
COLOR
or button to adjust the
SHARPNESS
Press the ENTER button until "SHARPNESS" appears on the
screen, then press the
sharpness.
In the fringe viewing areas, the picture may be more pleasing
ENTER
NOTES:
• The picture settings can only be adjusted by using the or button when they are displayed on the
or button to adjust the
SHARPNESS 0
SET
RESET
NEXT
:
: CANCEL
: ENTER
EXIT : MENU
FFREW
screen.
• The On-screen display will disappear about one minute after finishing an adjustment .
• TINT will only appear when NTSC system tape is played back or NTSC signal input to LINE IN (Rear A/V
16
jacks) or LINE IN 2 (Front A/V jacks) is selected.
5960101A 11-16E 21/06/2001, 20:2816
TO SET THE ON TIMER
STOP
PLAY
STOP
PLAY
This feature allows you to have the TV automatically turn on at predetermined time. If you program the
ON TIMER once the timer will turn on the TV daily at the same time and to the same channel.
EXAMPLE: Turning on the TV to channel 3 at 7:45, MONDAY-FRIDAY.
Press the MENU button.
Select the TV SETUP mode
using the
or button, then
press the ENTER button.
MENU
PLAY
ENTER
Press the or button to select
the ON/OFF TIMER SET mode,
then press the ENTER button.
PLAY
ENTER
Press the or button to
set the ON TIMER mode, then
press the ENTER button.
ENGLISH
ENTER
STOP
TIMER REC SET
VCR SETUP
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT
:
ENTER
: ENTER
EXIT
: MENU
–
1 6
61
Press the or button to set
the desired hour, then press
button.
the
FF
3
STOP
TV SETUP
ON/OFF TIMER SET
PICTURE
SELECT
:
ENTER
: ENTER
EXIT
: MENU
CALL
C
O
UN
RES
TER
ET
P
R
O
G
Z
R
RA
E
TUR
M
SP
/L
PLAY
PAUSE/STILL
P
FF
R
E
W
MENU
S
TO
R
E
C/OT
EJEC
T
P
R
TIM
R
E
EC
R
Set the desired minute, channel
and daily or weekly timer date as
in step 4, then press the
button.
PLAY
FF
ON/OFF TIMER SET
ON TIMER
0 : 00 CH 1
SUN-SAT
OFF TIMER
SELECT
ENTER
EXIT
TV MONI.
SLEEP
1
4
2
7
5
8
O / AV
0
9
ERO
MUTE
N
VOLUME
IN
D
E
X
E
NT
TRAC
AU
ER
TO
K
IN
G
C
A
N
C
E
L
STANDBY
ON/
3
6
CH/TRK
0 : 00
:
: ENTER
: MENU
CANCEL
CANCEL
4 5
Press the or button to
select the SET mode, then
press the ENTER button.
Press the MENU button to
return to normal TV screen.
PLAY
ENTER
MENU
ON/OFF TIMER SET
ON TIMER
7 : 00 CH 1
SUN-SAT
OFF TIMER
0 : 00
SELECT
:
SET
/ 0-9:
: ENTER
OK
CANCEL
CANCEL
EXIT: MENU
STOP
ON/OFF TIMER SET
ON TIMER
7 : 45 CH 3
MON-FRI
OFF TIMER
0 : 00
SELECT
:
SET
:
: ENTER
OK
CANCEL
CANCEL
EXIT: MENU
STOP
ON/OFF TIMER SET
ON TIMER
7 : 45 CH 3
MON-FRI
OFF TIMER
0 : 00
SELECT
:
SET
:
: ENTER
OK
EXIT: MENU
NOTES:• The TV will automatically turn off approximately 1 hour later after the ON TIMER turns on the TV. If you
wish to continue watching the TV, press any button to cancel the one hour automatic shut off. This shut
off feature prevents the TV from playing continuously if no OFF TIMER is set.
• To cancel the ON TIMER function; Follow above steps 1-5, then press the or button to select the
CANCEL position. Press the MENU button to return to the TV.
• After setting the ON TIMER, " " of the OFF TIMER will flash on and off. If you wish to set the OFF
TIMER, press the ENTER button then follow the steps 3-5 on page 18.
5960101A 17-22E 21/06/2001, 20:2817
SET
CANCEL
17
TO SET THE OFF TIMER
7 : 45 CH 3
ON TIMER
8 : 30
OFF TIMER
MON-FRI SET
SET
ON/OFF TIMER SET
SET
SELECT
EXIT: MENU
:
OK
:
: ENTER
This feature allows you to have the TV turn off automatically at a predetermined time. If you program the OFF TIMER
once, the TV will be automatically turned off at the same time daily.
EXAMPLE: Turning off the TV at 8:30.
Press the MENU button.
Select the TV SETUP mode
using the
or button, then
press the ENTER button.
MENU
PLAY
ENTER
Press the
or button to select
the ON/OFF TIMER SET mode,
then press the ENTER button.
PLAY
ENTER
Press the or button to
set the OFF TIMER mode, then
press the ENTER button.
PLAY
ENTER
STOP
TIMER REC SET
VCR SETUP
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT
:
ENTER
: ENTER
EXIT
: MENU
1 6
61
Press the or button to
set the desired hour, then
press the
PLAY
button.
FF FF
–
STOP
TV SETUP
ON/OFF TIMER SET
PICTURE
SELECT
ENTER
EXIT
3
REW
M
E
N
U
STOP
R
E
C
E
/O
J
T
E
R
C
T
Press the or button to set
the desired minute, then press
the
PLAY
T
IM
R
E
E
R
C
button.
P
A
U
S
STOP
ON/OFF TIMER SET
ON TIMER
7 : 45 CH 3
MON-FRI
OFF TIMER
:
: ENTER
: MENU
T
V
M
O
N
I.
S
L
E
1
E
4
7
C
A
L
L
C
8
O
U
R
N
O
E
T
S
/ A
E
E
R
T
P
R
O
G
R
P
L
A
FF
E
/S
T
IL
V
0
Z
R
E
E
R
A
T
O
M
U
R
N
S
P
IN
/L
P
D
E
X
E
N
T
E
R
C
A
N
Y
L
C
E
L
P
2
5
9
M
U
T
E
V
O
L
T
A
R
U
A
T
C
O
K
IN
G
S
O
T
N
A
/
N
D
B
3
6
U
M
E
Y
C
H
/T
R
K
SELECT
ENTER
EXIT
0 : 00
:
: ENTER
: MENU
4 5
SET
CANCEL
Press the or button to
select the SET mode, then
press ENTER button. Press
the MENU button to return to
normal TV screen.
PLAY
ENTER
MENU
STOP
ON/OFF TIMER SET
ON TIMER
7 : 45 CH 3
MON-FRI
OFF TIMER
8 : 00
SELECT
:
SET
:
/ 0-9
OK
: ENTER
SET
CANCEL
EXIT: MENU
STOP
ON/OFF TIMER SET
ON TIMER
7 : 45 CH 3
MON-FRI SET
OFF TIMER
8 : 30
SELECT
:
SET
:
: ENTER
EXIT: MENU
OK
STOP
SET
NOTES: • If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
• To cancel the OFF TIMER function:
Follow above step 1-5, then press the
button to return to the TV.
or button to select the CANCEL position. Press the MENU
• To confirm the ON/OFF TIMER:
18
5960101A 17-22E 21/06/2001, 20:2818
Press the PROGRAM button twice to indicate the programs on the screen.
LOADING AND UNLOADING THE VIDEO CASSETTE TAPE
EJECT
Use only video cassette tapes marked .
NTSC
LOADING
Push the center of the tape until it is automatically inserted.
AUTOMATIC PLAY
When loading a cassette tape without the erase prevention tab intact, playback will start immediately and the
TV will turn on.
Insert the cassette with its labelled side facing you.
An inverted cassette cannot be inserted.
UNLOADING
To unload a video cassette, press the EJECT
button on the remote control, or press the STOP/
EJECT button on the TV/VCR twice. The first
press will stop the tape in any mode. The second
press will eject the tape.
STOP/
EJECT
OR
Pull the cassette out.
ENGLISH
AUTOMATIC EJECT
When the VCR is automatically rewinding the tape and
reaches its end (AUTO REWIND), the tape will be ejected
automatically. (See NOTE on page 24.)
TO PREVENT ACCIDENTAL ERASURE TO RECORD AGAIN
After recording, break off the erase prevention tab if
you do not wish to record over the tape.
Screwdriver
Erase prevention tab
NOTES: • Always eject the tape when not in use.
Cover the hole with adhesive tape.
Be careful the tape does not extend past the edges of
the cassette housing.
Adhesive tape
• The cassette can be ejected even if the ON/STANDBY button is OFF.
5960101A 17-22E 21/06/2001, 20:2819
19
PLAYBACK
CLOCK SET
COLOUR SYSTEM AUTO
SYSTEM SETUP
EXIT
ENTER
SELECT
: MENU
: ENTER
:
/
MENU
FF
To play a pre-recorded cassette tape, select the suitable COLOUR SYSTEM if necessary.
TO START PLAYBACK
Insert a pre-recorded
cassette tape. Then start the
playback.
NOTE: [NT3.58] and [NT4.43] will appear when AUDIO/VIDEO input position (AV1 or AV2) is selected or during a playback
Press the MENU button.
Press the
select the SYSTEM SETUP
mode, then press the ENTER button.
MENU
or button to
PLAY
STOP
TIMER REC SET
VCR SETUP
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT
ENTER
EXIT
:
: ENTER
: MENU
ENTER
Press the or button to select the
COLOUR SYSTEM mode, then
press the
to select [AUTO], [PAL], [MESECAM],
[NT3.58] or [NT4.43]. COLOUR SYSTEM
usually used in AUTO position.
PLAY
STOP
/ or ENTER button
ENTER
Press the MENU
button to return to
the normal screen.
TV MONI.
SLEEP
1
4
2
STANDBY
7
5
8
6
O / AV
0
9
MUTE
R
O
R
N
VOLUME
IN
D
E
X
N
T
T
A
R
E
U
R
A
T
C
O
K
IN
G
C
A
N
C
E
L
ON/
3
CH/TRK
2
3
2
3
CALL
C
O
U
R
N
E
T
S
E
E
R
T
P
R
O
G
Z
R
E
R
E
A
T
M
U
S
P
/L
P
P
PAUSE/STILL
E
L
A
Y
FF
REW
MENU
STOP
R
E
C
E
/O
J
T
E
R
C
T
T
IM
R
E
E
R
C
TO REWIND OR FORWARD THE TAPE RAPIDLY
Press the REW button when in the STOP mode.
" will appear on the screen.
"
REW
FORWARD/REVERSE PICTURE SEARCH
If you want to see the tape program during REW(FF)mode, press down the REW(FF) button.
The backward(forward) visual search picture will be seen on the screen. Release the button to return to the REW(FWD)
mode.
NOTES:
With this unit, a NTSC tape recorded in the SLP tape speed can be played back. But there are some points to be observed.
Press the FF button when in the STOP mode.
" will appear on the screen.
"
• The quality of the playback picture and sound are not clear.
• Variable speed playback (picture search, still, etc.) can't be performed properly.
20
• Digital auto tracking may not be performed properly.
5960101A 17-22E 21/06/2001, 20:2820
MENU
PAUSE/STILL
TIM
ER
REC
REC
/O
TR
E
JECT
P
R
O
G
RA
M
S
P
/LP
CALL O / AV MUTE
SLEEP
CH/TRK
ON/
STANDBY
TV MONI.
VOLUME
E
N
T
ER
C
A
N
C
E
L
IN
D
E
X
A
U
T
O
TR
A
C
K
IN
G
C
O
U
N
T
E
R
R
E
S
E
T
ZE
R
O
R
E
TU
R
N
FF
REW
STOP
PLAY
0
8
7
9
6
5
4
3
2
1
SPECIAL PLAYBACK
TO VISUALLY SEARCH FOR DESIRED POINTS
When either the FF or REW button is pressed in the
PLAYBACK mode, the speed search picture will appear.
When pressed twice the search picture will increase in speed.
Speed search times depend upon the speed used (SP or LP)
during recording. To rewind or fast forward a tape, press the
STOP button, and then press the REW or FF button.
TAPE SPEED
SP (Standard Play)
PAL
LP (Long Play)
SP (Standard Play)
NTSC
SPEED SEARCH TIMES
PICTURE SEARCH SPEED
5 X 7 X
7 X
3 X
PRESS TWICEPRESS ONCE
13 X
5 X
Press the REW button once or twice in the PLAYBACK mode.
REW
To return to playback, press the PLAY button.
Press the FF button once or twice in the PLAYBACK
mode.
FF
ENGLISH
STILL PICTURE
Press the PAUSE/STILL button in the PLAYBACK mode.
PAUSE/STILL
To continue the normal playback, press PLAY button
again.
NOTES:
• The audio output is muted during SPEED SEARCH and STILL.
• A few noise bars will appear on the picture during SPEED SEARCH.
• To prevent damage to the tape, STILL playback is automatically resumed to the PLAY mode after 5 minutes.
5960101A 17-22E 21/06/2001, 20:2821
NTSC TAPE PLAYBACK
Your TV/VCR can playback video tapes recorded in
the NTSC Color System (TV system usually used in
America and Japan).
PLAY
21
TV MONI.
MENU
SPECIAL PLAYBACK
When a tape is played, the Digital Auto Tracking system automatically
adjusts the tracking to obtain the best possible picture. If noise bars appear
during playback, adjust the tracking manually as follows:
• Press the CH/TRK or button to obtain the best possible picture
within 4 seconds. To resume automatic tracking, press the AUTO
TRACKING button. "AUTO TR." will appear for 4 seconds on the
screen.
CH/TRK
MANUAL TR.
CH :
AUTO
TRACKING
AUTO TR.
(CONTINUED)
TO MONITOR A TV PROGRAMMEDIGITAL AUTO TRACKING ADJUSTMENTS
Press the TV MONI. button while
in the playback mode. The video
tape will continue to play while
the picture switches to the TV
channel selected on the TV/VCR.
Press the button again to return
to playback picture.
TV MONI.
SLEEP
1
4
2
7
5
8
O / AV
0
9
MUTE
R
O
R
N
VOLUME
IN
D
E
X
N
T
T
A
R
E
U
R
A
T
C
O
K
IN
G
C
A
N
C
E
L
STANDBY
ON/
3
6
CH/TRK
2
3
1
CALL
C
O
U
R
N
E
T
S
E
E
R
T
P
R
O
G
Z
R
E
R
E
A
T
M
U
S
P
/L
P
P
PAUSE/STILL
E
L
A
Y
FF
REW
MENU
STOP
R
E
C
E
/O
J
T
E
R
C
T
T
IM
R
E
E
R
C
TO WATCH A TAPE REPEATEDLY
Press the MENU button.
Press the
or button to
select the VCR SETUP mode,
then press the ENTER button.
TIMER REC SET
VCR SETUP
CH TUNING
TV SETUP
CLOCK SET
SELECT
: /
ENTER
: ENTER
EXIT
: MENU
PLAY
STOP
MENU
ENTER
NOTE: To cancel repeat mode, follow above steps 1 and 2, then press the button to select the OFF position.
Press the MENU button to return to the TV.
Press the or button to
select the AUTO REPEAT
mode, then press the
button to select the ON
position.
PLAY
STOP
FF
VCR SETUP
AUTO REPEAT
NTSC PLAYBACK OUT
SELECT
: /
ENTER
: ENTER
EXIT
: MENU
3.58
Press the MENU button to return
to normal TV screen. If you press
the PLAY button, the TV/VCR
will repeat playing the video tape
until the repeat mode is canceled.
ON
22
5960101A 17-22E 21/06/2001, 20:2822
RECORDING A TV PROGRAM
CH/TRK
RECORDING AND VIEWING THE SAME TV PROGRAM
Press the ON/STANDBY b u t t o n to turn on the TV/
VCR.
Load a cassette tape with the erase prevention
tab intact.
ON/
STANDBY
Press the SP/LP button to select the
desired tape speed SP or LP.
ENGLISH
TV MONI.
3
P
R
O
G
R
REW
MENU
R
E
C
E
/O
J
T
E
R
C
T
PLAY
STOP
PAUSE/STILL
T
IM
R
E
E
R
C
4
7
CALL
C
8
O
U
R
N
O / AV
E
T
S
E
E
R
T
0
Z
R
E
E
R
A
T
O
M
U
R
N
S
P
IN
/L
P
D
E
X
E
N
T
E
R
C
A
FF
Press the Direct channel selection buttons or
CH/TRK
recorded. (Example: Channel 2)
SLEEP
1
2
5
9
MUTE
VOLUME
T
A
R
U
A
T
C
O
K
IN
G
N
C
E
L
STANDBY
ON/
3
6
CH/TRK
or to select the channel to be
1
4
SP/LP
2
OR
CH 2
• Before recording a TV program, check if the COLOUR SYSTEM is
in the AUTO position or suitable system is selected. (See page 20.)
NOTES: • If the power is switched off during recording, the TV section shuts off and the VCR section continues to record.
• Press the STOP button to stop the recording and to turn off the VCR.
• The TV/VCR channel cannot be changed during recording.
• If the erase prevention tab is removed, the tape will eject when the REC/OTR buttons are pressed.
5960101A 23-32E 21/06/2001, 20:2923
23
M
E
N
U
P
A
U
S
E
/S
T
IL
L
T
IM
E
R
R
E
C
R
E
C
/O
T
R
E
J
E
C
T
PR
O
G
R
A
M
S
P/LP
C
A
L
L
O
/ A
V
M
U
T
E
S
L
E
E
P
C
H
/T
R
K
O
N
/
S
T
A
N
D
B
Y
T
V
M
O
N
I.
V
O
L
U
M
E
E
N
TE
R
C
A
N
C
E
L
IN
DEX
A
U
T
O
TR
A
C
K
IN
G
C
O
U
N
TE
R
R
E
S
E
T
ZE
R
O
R
E
TU
R
N
F
F
R
E
W
S
T
O
P
PLA
Y
0
8
7
9
6
5
4
3
2
1
RECORDING A TV PROGRAM
TO STOP RECORDING
Press both the REC/OTR buttons at the same time.
" " and the channel number will appear on the
screen and the REC/OTR indicator will light.
(CONTINUED)
Press the STOP button to stop recording.
" will appear on the screen.
"
REC/OTR
CH 2
REC/OTR
INDEX
5
TO STOP RECORDING TEMPORARILY
Press the PAUSE/STILL button to stop recording of unwanted material. "
OTR indicator will blink on and off.
Press again to continue the recording.
STOP
" will appear on the screen and the REC/
NOTE:
• To prevent damage to the video head and video tape the pause function will stop the VCR operation after about
5 minutes.
NOTE:
AUTO REWIND FEATURE:
This TV/VCR will automatically rewind and eject the tape when the tape has ended (except during OTR and TIMER REC).
• If the tab has been removed, the tape will eject whenever the REC/OTR buttons are pressed.
24
5960101A 23-32E 21/06/2001, 20:2924
PAUSE/STILL
REC/OTR
CH 2
TIMER RECORDING
TIMER REC SET
VCR SETUP
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
EXIT
ENTER
SELECT
: MENU
: ENTER
:
• Timer recording can be programmed on screen with the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1 month.
• Load a cassette tape with the erase prevention tab intact. The TV/VCR will automatically turn on.
• Make sure that the clock shows the present time correctly.
EXAMPLE:
Program a timer recording for 13:00-14:30, channel 3, on timer program number 1.
Press the MENU button.
Check the TIMER REC SET mode is selected,
then press the ENTER button.
MENU
3
1
Press the or button to select one of the
program lines, then press the ENTER button.
PLAY
ENTER
MENU
R
E
C
E
/O
J
T
E
R
C
T
ENGLISH
ENTER
T
V
M
O
N
I
.
S
L
E
1
E
4
7
C
A
L
L
C
8
O
U
R
N
O
E
T
S
E
/
E
R
A
T
P
R
O
G
R
A
REW
P
L
A
STOP
FF
PAUSE/STILL
T
IM
R
E
E
R
C
V
0
Z
R
E
E
M
R
T
O
M
U
R
N
S
P
IN
/
L
P
D
E
X
E
N
T
T
E
R
C
A
N
Y
C
E
L
P
2
5
9
U
T
E
V
O
L
A
R
U
A
T
C
O
K
I
N
G
S
O
T
N
A
/
N
D
B
3
6
U
M
E
Y
C
H
/
T
R
K
32
4
Press the or button to select the desired
date or every day or every week setting (see
page 27.), then press the
FFREW
button.
STOP
STOP
NOTES:
• If programming is performed without a tape in the TV/VCR, or with a tape without an erase prevention tab,
the Timer Recording is not possible. If a tape without an erase prevention tab is in the TV/VCR, the tape
will be ejected.
• To record from the external equipment press the or button repeatedly until "AV1 (from rear
jacks) or AV2 (from front jacks) appears when setting the channel in step 5.
5960101A 23-32E 21/06/2001, 20:2925
SELECT
EXIT
: MENU
TIMER REC SET
DATE
23 SAT
11: 30
START
END
:
– –
– –
CH
1
SPEED
SP
SELECT
/ ENTER:
SET
EXIT
:
:/ 0-9
: MENU
25
M
E
N
U
P
A
U
S
E
/S
T
IL
L
T
IM
E
R
R
E
C
R
E
C
/O
T
R
E
J
E
C
T
P
R
O
G
R
A
M
S
P
/L
P
C
A
LL
O
/ A
V
M
U
T
E
S
L
E
E
P
C
H
/T
R
K
O
N
/
S
T
A
N
D
B
YT
V
M
O
N
I.
V
O
LU
M
E
E
N
T
E
R
C
A
N
C
E
L
IN
D
E
X
A
U
T
O
T
R
A
C
K
IN
G
C
O
U
N
T
E
R
R
E
S
E
T
Z
E
R
O
R
E
T
U
R
N
F
F
R
E
W
S
T
O
P
P
L
A
Y
0
8
7
9
6
5
4
3
2
1
EXIT
SELECT
: MENU
/ ENTER:
23 SAT 13 : 00
14 : 30
LP3
:
:
:
:
:
:
:
:
:
:
:
:
:
:
MENU
TIMER RECORDING
Set the start time, end time, channel and tape speed as in step 4.
When you have finished setting all your recordings, press ENTER. Press MENU to return to normal TV
screen.
FFREW
STOP
ENTER
TIMER REC SET
DATE
START
END
CH
SPEED
SELECT
:
SET
:/ 0-9
EXIT
: MENU
23 SAT
13: 00
14: 30
1
LP
OK : ENTER
5
(CONTINUED)
6
To set the timer for another program, press the or
button until the number of the second program blinks,
then press the ENTER button.
Repeat steps 4 to 5 to set the second program.
Press both the TIMER REC buttons at the same
time. The TIMER REC indicator will light. When
the programmed time is reached, the recording
is automatically started.
TIMER
REC
4
TIMER REC
5
NOTES: • The VCR section cannot be used while the TIMER REC indicator is lit. If you want to use the VCR operation, press both
the TIMER REC buttons at the same time to deactivate the timer.
• After a power failure or disconnection of the power plug, all programmed recording setting and time display will be lost
upon resumption of power. In this case, reset the clock (see page 12.) and reprogram any timer recordings.
• If you want to correct the digits while setting, press the
or button to correct the desired setting.
26
5960101A 23-32E 21/06/2001, 20:2926
To cancel timer recording, press both the buttons again
and TIMER REC
button until the item you want to correct, then press the
indicator will go out.
OTHER FUNCTIONS FOR TIMER RECORDING
TO SET DAILY/WEEKLY TIMER
When setting the date in the step 4 on page 25, press the button repeatedly when the current day is displayed.
The setting changes as follows:
After setting, press ENTER button.
Example
The current day (Friday) SUN-SAT (Sunday to Saturday)
MON-SAT (Monday to Saturday)
One month later
minus one day MON-FRI (Monday to Friday)
WKL-WED WKL-THU (Weekly Thursday)
(Weekly Wednesday)
TV MONI.
SLEEP
1
4
2
7
5
CALL
C
O
U
R
N
O / AV
E
T
S
E
E
R
T
P
0
R
O
G
Z
R
E
R
E
R
A
T
O
M
U
R
N
S
P
IN
/L
P
D
E
X
E
N
T
E
REW
MENU
STOP
R
E
C
E
/O
J
T
E
R
C
T
PAUSE/STILL
T
IM
R
E
E
R
C
R
P
C
L
FF
A
A
Y
3
8
6
CH/TRK
9
MUTE
VOLUME
T
A
R
U
A
T
C
O
K
IN
G
N
C
E
L
STANDBY
ON/
ENGLISH
TO CONFIRM THE SETTINGS
Press the PROGRAM button once. The TV screen displays the timer program list.
Press the PROGRAM button again. The TV screen displays the ON/OFF timer setting.
PROGRAM
Press the PROGRAM button 3 times. The screen returns to the normal screen.
5960101A 23-32E 21/06/2001, 20:2927
(once)
23 SAT 13 : 00
:
:
:
:
:
:
:
SELECT
CLEAR : CANCEL
14 : 30
LP3
:
:
:
:
:
:
:
/ ENTER:
EXIT
: MENU
ON/OFF TIMER SET
ON TIMER
7 : 45 CH 3
MON-FRI SET
OFF TIMER
8 : 30
SELECT
ENTER
EXIT
(twice)
:
: ENTER
: MENU
SET
27
(CONTINUED)OTHER FUNCTIONS FOR TIMER RECORDING
TO CANCEL A PROGRAM
Press the or button to select the TIMER REC SET mode in the MENU, then press the ENTER button.
Press the
or button to select the unnecessary program, and press the CANCEL button to cancel the program.
CANCEL
SELECT
/ ENTER:
EXIT
: MENU
TV MONI.
SLEEP
1
4
2
STANDBY
7
5
CALL
COUNTER
8
RESET
PROGRAM
ZERO
RETURN
SP/LP
PLAY
PAUSE/STILL
ENTER
FF
REW
MENU
STOP
REC/OTR
EJECT
TIMER
REC
6
O / AV
0
9
MUTE
VOLUME
INDEX
TRACKING
AUTO
CANCEL
ON/
3
CH/TRK
IF THE PROGRAM OVERLAPS ANOTHER
NOTE:
Do not overlap programs as portions of the conflicting programs will be lost. The first recording time has
priority over the next recording time as shown in the diagram.
8 : 00
9 : 00
10 : 00
11 : 00
NOTES: • The everyday/every week recording can be made continuously until the recording is canceled or the tape
reaches the end.
• During timer recording, the automatic rewinding mechanism does not function.
• You can correct or cancel the programmed setting in program confirm mode.
28
5960101A 23-32E 21/06/2001, 20:2928
ONE-TOUCH TIMER RECORDING (OTR)
REC/OTR
The one-touch timer recording feature provides a simple and convenient way to make a timed recording.
EXAMPLE: One-touch timer recording for 30 minutes.
Press the ON/STANDBY
button to turn on the TV/
VCR.
Load a video cassette with
the erase prevention
tab intact.
Press the SP/LP button to
select the desired tape
speed SP or LP.
ON/
STANDBY
4
R
E
MENU
5
EJECT
Press the Direct Channel Selection buttons or
CH/TRK
be recorded. (Example: Channel 2)
or button to select the channel to
2
OR
CH/TRK
REC/OTR
S
TIMER
REC
SP/LP
T
V
M
O
N
I.
S
LE
1
E
4
7
C
A
LL O
COUNTER
8
RESET
/ A
PROGRAM
P
L
W
T
O
P
PAU
SE/STILL
V
0
ZERO
RETURN
M
SP/LP
INDEX
ENTER
TRACKING
CANCEL
A
Y
F
F
Press both the REC/OTR buttons at the same
time to begin recording. Press the buttons again
for 30 minutes recording. Each additional press of
both the REC/OTR buttons at the same time will increase
recording time as shown below, up to a maximum of 5
hours. "OTR" will appear on the screen.
P
2
S
O
T
N
A
/
5
6
9
U
TE
V
O
L
U
M
AUTO
N
D
B
3
Y
C
H
/T
R
K
E
3
ENGLISH
1
NOTES: •
Press both the REC/OTR buttons at the same time to increase the time needed for recording. (See the chart below .)
Press
Recording time
• When the tape speed LP is selected, the recording time can be set up to 10 hours.
• To cancel OTR, press the STOP button.
• The TV/VCR channel cannot be changed during recording.
once
NORMAL REC
5960101A 23-32E 21/06/2001, 20:2929
CH 2 OTR 0 : 30
twice
0:30
3 times
1:00
4 times
1:30
5 times
2:00
6 times
3:00
7 times
4:00
8 times
INDEX
5:00
CH 2
9 times
NORMAL REC
29
MENU
PAUSE/STILL
T
IM
E
R
R
E
C
R
E
C
/O
T
R
E
J
E
C
T
P
R
O
G
R
A
M
S
P
/L
P
C
A
L
L
O
/
A
V
M
U
T
E
S
L
E
E
P
C
H
/T
R
K
O
N
/
S
T
A
N
D
B
Y
T
V
M
O
N
I
.
V
O
L
U
M
E
E
N
T
E
R
C
A
N
C
E
L
IN
D
E
X
A
U
T
O
T
R
A
C
K
IN
G
C
O
U
N
T
E
R
R
E
S
E
T
Z
E
R
O
R
E
T
U
R
N
FF
REW
STOP
PLAY
0
8
7
9
6
5
4
3
2
1
USING THE REAL TIME TAPE COUNTER
The On-Screen Real Time Tape Counter shows the tape running time in Hours, Minutes and Seconds.
You can easily determine how long the tape has been running or how much time is left on the tape.
TO VIEW THE COUNTER DISPLAY
Press the CALL button to display the Real
Time Tape counter.
CALL
11 : 30 SAT
01 : 30 : 21 SP
41
2
3
Press the COUNTER RESET button to set the
counter to "00:00:00".
COUNTER
RESET
11 : 30 SATCH 2
CH 2
00 : 00 : 00 SP
Press the PLAY or both the REC/OTR buttons at
the same time to start the tape, the counter will
display the passed time.
PLAY
NOTES: • If you rewind the tape from "00:00:00", a minus sign "–" will be displayed in front of the timer.
• When you load a tape, the counter will change to "00:00:00".
• The counter does not function on non-recorded (blank) sections of the tape. When you rewind, fast
forward or play tapes through blank sections, the counter stops.
30
5960101A 23-32E 21/06/2001, 20:2930
When you wish to make the counter disappear,
press the CALL button once again.
REC/OTR
CALL
OR
CH 2
00 : 00 : 00 SP
11 : 30 SAT
USING ZERO RETURN
CH 2
00 : 00 : 00 SP
11 : 30 SAT
PLAY
The zero return function provides a convenient method of rapidly returning to the starting point of recording
or playback. The starting point can be indexed for any location on the tape by pressing the COUNTER
RESET button and ZERO RETURN button.
Press the CALL button to display the counter.
CALL
11 : 30 SAT
CH 2
01 : 30 : 21 SP
1
2
3
R
E
C
E
/O
J
T
E
R
C
T
MENU
Before playback or recording, press the
COUNTER RESET button to set the counter
to "00:00:00".
COUNTER
RESET
T
V
M
O
N
I.
S
L
E
1
E
4
7
C
A
L
L
C
8
O
U
R
N
O
E
T
S
E
/
E
R
A
T
P
R
O
G
R
REW
PLAY
STOP
FF
PAUSE/STILL
T
IM
R
E
E
R
C
V
0
Z
R
E
E
M
R
A
T
O
M
U
R
N
S
P
IN
/L
P
D
E
X
E
N
T
T
E
R
C
A
N
C
E
L
P
2
S
O
T
N
A
/
5
6
9
U
T
E
V
O
L
U
M
A
R
U
A
T
C
O
K
IN
G
N
D
B
3
Y
C
H
/
T
R
K
E
5
4
ENGLISH
Begin playback or recording.
REC/OTR
OR
5960101A 23-32E 21/06/2001, 20:2931
Press the STOP button.
STOP
Press the ZERO RETURN
button. The tape will rewind
and automatically stop at
the "00:00:00" position.
ZERO
RETURN
31
VIDEO INDEX SEARCH SYSTEM (INDEX)
INDEX 4
EXIT
SEARCH
NO.
: INDEX
:
1-9:
4
The VIDEO INDEX SEARCH SYSTEM (INDEX) enables you to locate the beginning of any recording made on the
TV/VCR. The Index Search function automatically records an INDEX mark on the tape whenever a recording is initiated.
This mark can easily be located by using the FF and REW buttons.
SEARCHING FOR AN INDEX MARK
To search for an index mark, or skip over a
number of index marks:
Press INDEX button during stop or playback.
INDEX
INDEX 1
NO.
1-9:
:
SEARCH
: INDEX
EXIT
2
M
E
N
REC/OTR
EJECT
3
RE
W
U
S
TO
P
TIMER
REC
Select the number of INDEX marks to be skipped
by using the Channel Number keys (1-9).
INDEX 4
NO.
1-9:
SEARCH
:
EXIT
: INDEX
EXAMPLE: When the tape has four separate recorded
programs, select 4 to go to the beginning of the 4th
program (4th index mark).
T
V
M
O
N
I.
S
L
E
1
E
4
7
C
A
L
L
COUNTER
8
RESET
O
/ A
PROGRAM
P
L
A
FF
P
A
U
S
E
/S
T
IL
L
V
0
ZERO
RETURN
SP/LP
INDEX
ENTER
TRACKING
CANCEL
Y
P
2
5
9
M
U
T
E
V
O
L
AUTO
S
O
T
N
A
/
N
D
B
3
6
U
M
E
Y
C
H
/T
R
K
1
Press the FF or REW button. The TV/VCR will skip over the selected number of INDEX marks and will
start playback at the selected mark.
REW
FF
OR
NOTES: •When you recorded an INDEX mark at the very beginning of the tape, the mark may not be found.
•During INDEX search, the tape may stop and begin to play at a slightly different location.
•INDEX may not function properly with old or worn out video tapes.
32
5960101A 23-32E 21/06/2001, 20:2932
0 / AV
0
DUPLICATING A VIDEO TAPE
If you connect the TV/VCR to another VCR or VIDEO CAMERA, you can duplicate a previously recorded tape. Make
all connections before turning on the power.
Load a blank cassette tape with the erase
prevention tab intact into the recording VCR.
Load a previously recorded tape into the
playback VCR or VIDEO CAMERA.
Recording TV/VCR
Playback VCR
To VIDEO
OUT
To AUDIO
OUT
Audio/Video Cord (not supplied)
T o VIDEO IN
T o AUDIO
IN
Press the AV button to select the AUDIO/VIDEO
input position. The "AV2" will appear on the
screen.
AV
2
NOTE: You can also use the rear AUDIO/VIDEO IN
Jacks. Select "AV1" by pressing the AV
button.
CONNECTION TO CAMCORDERCONNECTION TO ANOTHER VCR
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer’s instr uctions. A typical
camcorder dubbing hookup is shown below.
Recording TV/VCR
Playback
Camcorder
To AV Jack
Audio/Video Cord
(not supplied)
T o VIDEO/A UDIO IN
ENGLISH
Press both the REC/OTR
buttons at the same time on
the remote control of the
TV/VCR, then press the
Press the PLAY Button on the
playback VCR, then press the
PAUSE/STILL button.
Press the PAUSE/STILL
buttons on both units
simultaneously to begin the
duplicating process.
PAUSE/STILL button.
REC OTR
PAUSE/STILL
PLAY
PAUSE/STILL
NOTE: Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may
infringe the rights of copyright owners and be contrary to copyright laws.
5960101A 33-backE 21/06/2001, 20:3033
33
NTSC RECORDING
ENTER
NTSC Colour System tape can be copied by the following setup.
Press the MENU button.
Press the
or button to select the VCR
SETUP mode, then press the ENTER button.
MENU
PLAY
STOP
T o VIDEO
ENTER
TIMER REC SET
VCR SETUP
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT
ENTER
EXIT
Playback TV/VCR
IN
OUT
AUDIO
AUDIO
VIDEO
VIDEO
To AUDIO
OUT
:
: ENTER
: MENU
OUT
Press the or button to select the NTSC
PLAYBACK OUT mode, then press the
ENTER button.
PLAY
STOP
Recording VCR
T o VIDEO IN To A U DIO IN
VCR SETUP
AUTO REPEAT
NTSC PLAYBACK OUT
SELECT
ENTER
EXIT
: /
: ENTER
: MENU
OFF
3.58
Press the / or ENTER button to select
[3.58] or [4.43].
• Select 3.58 for your recording VCR is NTSC system.
• Select 4.43 for your recording VCR is PAL system.
FFREW
ENTER
34
5960101A 33-backE 21/06/2001, 20:3034
VCR SETUP
AUTO REPEAT
NTSC PLAYBACK OUT
SELECT
: /
ENTER
: ENTER
EXIT
: MENU
Press the MENU button to return to the normal
screen.Then start the recording.
MENU
OFF
4.43
BEFORE REQUESTING SERVICE
If your TV/VCR does not work properly check the following before calling a service engineer.
CAUSESYMPTOM SOLUTION PAGE
POWER
No power.
Recorder does not work
even though STANDBY.
TV BROADCAST RECEPTION
No picture, no sound.
Sound OK, poor picture.
Picture OK, poor sound.
Poor reception.
Poor color or no color.
RECORDING
Recording does not work.
Timer recording does not
work.
INDEX mark was not
registered.
The Mains lead is not connected.
Main power switch is OFF.
TIMER REC buttons are ON.
(TIME REC indicator is on.)
Moisture condensation has formed inside
recorder.
The Mains lead is disconnected.
Antenna connector is not connected or wires
are broken.
ON/STANDBY button is off.
Possibly station trouble.
Possibly station trouble.
Antenna conector is not connected or wires
are broken.
Possibly local interference.
Possibly station trouble.
Possibly local interference.
Volume control set at minimum position.
Antenna connector is not connected or wires
are broken.
Possibly station trouble.
Antenna connector is not connected or wires
are broken.
Possibly station trouble.
Possibly local interference.
Color control is not adjusted.
Protection tab on the cassette tape has been
removed.
Main power switch is OFF.
Clock is not set.
START/END time is not correctly.
TIMER REC buttons are OFF.
Present time is not set correctly.
One-Touch Timer Recording (OTR) is ON.
INDEX mark was recorded at the beginning
of the tape.
Set it to ON.
Set them to OFF.
(TIME REC indicator is off.)
Wait for a few hours.
Connect the Mains lead to the AC outlet.
Check Antenna connections or broken wires.
Press the ON/STANDBY button.
Try another channel.
Try another channel.
Check Antenna connections or broken wires.
Move the Antenna away from the source of
interference.
Try another channel.
Move the Antenna away from the source of
interference.
Increase VOLUME control.
Check Antenna connections or broken wires.
Try another channel.
Check Antenna connections or broken wires.
Try another channel.
Move the Antenna away from the source of
interference.
Press the CANCEL button.
Place an adhesive tape over the gap.
Set main power to ON.
Set the clock.
Set the START/END time correctly.
Set the TIMER REC buttons to ON.
Set the present time correctly.
After OTR recording, set the timer recording.
Let the tape run for a couple of seconds
before recording the first INDEX mark.
4Connect Mains lead to AC outlet.
4
26
2
4
7
4
13
13
7
37
13
37
13
7
13
7
13
37
15
19
4
12
25/26
26
12
29
32
ENGLISH
5960101A 33-backE 21/06/2001, 20:3035
35
BEFORE REQUESTING SERVICE
(CONTINUED)
SYMPTOM
CAUSE SOLUTION PAGE
PLAYBACK
Noise bars on screen.
Cannot locate INDEX
mark.
Tracking is not adjusted.
Video heads are dirty.
The tape is worn or damaged.
The tape is worn or damaged.
Adjust the TRACKING control.
Clean the video heads.
Try another tape.
Try another tape.
REMOTE CONTROL
Aim it at the remote control sensor.
Operate within 5 metres and reduce the
light of the room.
Clear the path of the beam.
Replace batteries.
Install batteries correctly.
Remote control does not
work.
It is not aimed at the remote sensor.
Distance too far or there is too much light in
the room.
Obstacle in the path of beam.
Batteries are weak.
Polarities of the batteries, + or –, are not
inserted correctly.
VIDEO HEAD CLOGGING
The video heads record and playback picture and sound on the video tape. In the event that they become
dirty you won't be able to do a perfect recording and the playback picture will be extremely snowy with
good sound. If this happens have the TV/VCR checked by qualified service personnel.
22
36
-
-
6
6
6
6
6
Good Picture Snowy Picture
VIDEO HEAD CLEANING
AUTO HEAD CLEANING cleans the video heads automatically when a cassette is inserted or ejected.
This prevents dirt from accumulating onto the heads which can cause snowy picture.
When this happens (snowy picture) this signifies that the heads are either worn or needs cleaning,
consult your local service centre for servicing.
NOTE:
Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
•
To help prevent video head cleaning, use only good quality VHS tapes. Discard worn tapes.
•
36
5960101A 33-backE 21/06/2001, 20:3036
RECEPTION DISTURBANCE
The most common types of television interference are as follows.
IGNITION
Black spots or horizontal streaks may appear, picture may flutter or drift.
Usually caused by interference from car ignition systems, neon lamps, electrical
drills and other electrical appliances.
GHOSTS
Ghosts are caused by the television signal following two paths. One is the direct
path and the other is reflected from tall buildings, hills or some other object.
Changing the direction or position of the antenna may improve the reception.
SNOW
If your receiver is located in the fringe area of a television station where the
signal is weak, your picture may be marred by the appearance of small dots.
When the signal is extremely weak, it may be necessary to install a special
antenna to improve the picture.
ENGLISH
RADIO FREQUENCY INTERFERENCE
The interference produces moving ripples or diagonal streaks, and in some
cases, causes loss of contrast in the picture.
PICTURE SIZE VARIATION
A slight picture size variation is normal when you adjust the CONTRAST or
BRIGHTNESS control.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the TV/VCR from the AC power source before cleaning. The finish on
the cabinet may be cleaned with mild soap and a soft damp cloth. Take care when cleaning or wiping the plastic
parts.
5960101A 33-backE 21/06/2001, 20:3037
37
SPECIFICATIONS
TELEVISION
Picture Tube:
Broadcasting System
Tuner:
Receiving Channels:
Antenna Input:
Audio Output Power:
Speaker:
VCR
Operating Temperature:
Video System:
Video Recording System:
Audio Track:
Tape Format:
F. FWD/REW Time:
Tape Speed:
Play Back Time:
Input Level:
Output Level:
GENERAL
Power Source:
Power Consumption:
Weight:
Dimensions:
21" (51 cm "V") measured diagonally
90 degrees deflection
CCIR B/G, D/K
Electronic Tuner
VHF: E2-S41
UHF: E21-E69
VHF/ UHF 75 ohm unbalanced
1.5W+1.5W (max)
4.6cmx12.2cm 8ohm x 2
5°C to 40°C
CCIR 625 Lines 50 Fields
PAL/NTSC/MESECAM
VHS, 2 Rotary Heads Helical Scanning System
Luminance: FM azimuth recording
Color signal: converted sub-carrier phase shift recording
1 Track
12.65mm high density tape
Approx. 1 minutes 48 seconds
(With E-180 Cassette Tape)
SP: 23.39mm/s, LP: 11.69mm/s
(NTSC SP: 33.35mm/s)
300 min.with E-300 video cassette (PAL)
210 min.with T-210 video cassette (NTSC)
Video: 1.0 Vp-p/ 75 ohm unbalanced
Audio: -3.8dB, 50k ohm unbalanced
Video: 1.0 Vp-p/ 75 ohm unbalanced
Audio: -3.8dB, 1k ohm unbalanced
110-240V, 50/60Hz
70 W (AC 220V, 50Hz)
26.5 kg
574(W)x514.5(H)x483(D)mm
REMOTE CONTROL UNIT
Power Supply:
ACCESSORIES
Weight and Dimensions are approximate. Because we continually strive to improve our products we
may change specifications and designs without prior notice.
Record the Model No. and the Serial No. as found
on the label on the back of your unit in the space
provided on the right.
Retain this information for future reference.
DC 3V (Two batteries, AAA/ R03/ UM-4)
Remote Control unit
2 Batteries (AAA/ R03/ UM-4)
Model No.
Serial No.
38
5960101B 33-backE 25/07/2001, 11:1738
MEMO
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
ENGLISH
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
5960101A 33-backE 21/06/2001, 20:3039
39
Loading...