Toshiba SX-2801 QUICK REFERENCE GUIDE
QUICK
REFERENCE
CALLER ID CORDLESS TELEPHONE
SX-2801
GUIDE
Read the Owner’s Manual for details.
SETTING UP THE BASE UNIT
Raise the antenna to vertical position.
SETTING / USING THE PHONE
Setting The Dial Mode
Depending on your dialing system, set the mode as follows:
1
Press and hold
2
To set the dial mode for pulse dialing, press #/
for tone dialing press
A confirmatin tone sounds to indicate the setting is complete.
FLASH
until you hear a confirmation tone.
PULSE
TONE/
.
. Or to set the dial mode
CALLER ID SERVICE
Setting Up Caller ID Making a Call with Caller ID Data
To use Caller ID/Caller ID on Call Waiting features, you must subscribe to both Caller
ID/Caller ID on Call Waiting services provided by your local telephone company.
1
2
Note: For long distance calls, you need a prefix “1” and the area code.
Press
before press
Press
Press
L.D./1
CID
, then press or to display the number you want to dial.
TALK
, then displayed number will be dialed.
LOCAL/3
and
TALK
.
to add or cancel “1” and the area code
Fasten the AC
adaptor cord.
NOTE: Plug the AC adaptor firmly into the base unit and the AC 120V outlet.
Telephone Line Code
AC Adaptor
CHARGING THE BATTERY PACK
Red
Charging contacts
Black
IN USE/
CHARGE
LED
1
Remove the battery cover by sliding it down.
2
Plug the battery pack cord into its socket, observing
the correct polarity.
3
Place the battery pack . Then close the battery
compartment cover.
4
Place the handset on the base unit. You can place
the handset with the dialpad facing up or down.
IMPORTANT
Charge the battery pack for at least 12 to 16 hours.
Single-Line
Telephone Jack
(RJ11C)
Power Outlet
(AC 120V, 60Hz)
Dial Mode:Pulse
Tone - Press
Pulse - Press #
TONE/
Tone Dialing
Dial Mode:Tone
Tone - Press
Pulse - Press #
#
PULSE
/
Pulse Dialing
Area Code
1
2
3
Press
Press
Press
FUNCTION
SELECT
SELECT
, then press 3.
and enter a 3-digit area code.
, then press
FUNCTION
Making a Call
1
Dial the phone number.
Press
Press
TALK
TALK
.
to hang up.
2
3
Answering a Call
TALK
Press
NOTE: To indicate Caller ID data, let the
phone ring twice before you answer the call.
and speak.
.
FLASH
TALK
SELECT
TONE/
FUNCTION
Storing Caller ID Data to Speed-Dial Memory
CID
Press
Speed-dial memory.
Press
Press
Press
Press
delete from the memory.
Press
Press
Press
, then press or to display the number you want to store into
, then press , or enter a memory location number.
MEM
SELECT
CID
CID
DELETE
SELECT
CID
. A confirmation beep sounds and the Caller ID data is stored.
to return to standby mode.
, then press or to display the Caller ID number you want to
, then press or to select Yes or No.
DELETE
or
to return to standby mode.
.
TALK
SELECT
MEM
1
,
2
3
FLASH
CID
1
3
Deleting Caller ID Data
1
DELETE
FUNCTION
2
3
4
Selecting Caller ID Options
1
3
2
3
4
See page 15 and 16 in the owner’s manual for more information.
FUNCTION
Press
Press , , or 2 to move the pointer to CIDCW.
SELECT
Press
FUNCTION
Press
.
to change the option setting.
and return the handset to the base.
Call Waiting Options
1
When you receive a call waiting call, press
2
Press or to select an option.
Press
Press
SELECT
TALK
to confirm.
or return the handset to the base to end the call.
3
4
See page 33 in the owner’s manual for more information.
FUNCTION
for a list of options.
UCZZ69719BZ RC009799 Printed in China
For more detailed instructions and examples, please refer to the owner’s manual.
Loading...