Page 1
TOSHIBA
Speaker Svstems
OWNER’S MANUAL
SST6200 /
.,. .; .; .,. .,. .,. .,. _ .; .,. _ _
:. :,
I..‘. L :. :.:. : :. :.:.:. :. :..
SSC5300
Page 2
Dear Customer
Welcome to the high quality sound world created by
Systems.
This owner’s manual applies to models SST6200 and
This manual will help you enjoy the exciting realism of the speakers.
Before operating your speakers, please mad all the safety and operating instructions
in this manual thoroughly, and keep it for future reference.
Customer’s Record
You will fmd the model number and serial number on the back of the speakers.
Record
Refer to them whenever you call upon your
these numbers in the spaces provided below.
TOSHIBA
Toshiba
SSC5300.
dealer
regarding this product.
Home Theater
r
Speaker
Safety Precautions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning symbol in the
tells you that the voltage
product may be. strong enough to
cause an
DO NOT TRY To SERVICE THIS
PRODUCT YOURSELF!
WARNING
*KBCK,BiKUTBEHUUECUUEB*BEEACKl.
I
USEE- SEEYICEABLE PABTS IKSIDE. KEFEE
SEBVICIK6TCQOAllRED!%EBKlCE
I
TO KEBUCE TKE
RISK OF ELECTRIC
PEBOKKU.
KC1
I
instn~~tions
electric
shock.
follow this symbol.
Table of Contents
1.INTRODUCTION.........................................
2.CONNECTING...........................................
3.PLACEMENT.............................................
4. CARE AND MAINTENANCE...........................
5.SPECIFICATIONS.......................................
6. TROUBLESHOOTING
7. WARRANTY..............................................
...................................
triangle
inside
this
1
Page 3
L Intros
Toshiba’s Home Theater Speaker Systems am designed to enhance your entertainment
pleasure by recreating the sonic impact of a movie theater in your home. The SST6200 and
SSC5300
presentation of sound information to achieve this result, especially when used with the
Toshiba
correctly set-up and achieve the optimum performance from your Toshiba Home. Theater
Speaker System.
2. Set-Uo 8~ Connecting
After unboxing your system, you will find threaded inserts have been provided in the
bottom of your SST6200 speakers. These are to
the speakers slightly above the level of the
can be adjusted to make the speakers level. Spikes are for use only on carpeted
floors!
Before attempting any connection, switch your amplifier to OFF
or STANDBY to prevent damage and risk of electrical shock
You can connect to the five-way binding posts by a) connecting a
spade terminal around the binding post, b) inserting wire though
the hole provided in the post, or c) inserting a banana connector
into the plug at the end of the post.In addition to the markings
on the terminal plates, positive terminals have been marked with
a red band and negative terminals with a black band, making it
easy for you to locate. the correct terminal for connection.
Remember: switch the amplifier to STANDBY before attempting any
connection.
speakers were specifically designed to provide you with a spacious and realistic
XB-20000
surround-sound amplifier. Follow the detailed instructions on this page to
accomodate
carpet
to prevent imprinting in your carpet and
spikes, which will suspend
L
Do not turn the amplifier ON until all connections are completed!
_
In a
home
theater environment,
placement for the speakers is closely tied
Television and
center
channel
above
or below)
to the location of your television. The
diagram at left will provide you with the
general layout of your home theater
system, indicating the variety of positions
for all the speakers. When setting up
your system, try to avoid placing other
furnishings between the speakers and
your viewing/listening position or directly
alongside the speakers as these can
diminish sound quality
\I
Your speakers should be placed along
Rear Right an
6200
SST
arc will enhance the “surrounding” presentation of soundYou can also greatly enhance the
system’s sense of depth by placing the SST 6200 speakers several feet out from walls, if your
room allows for this.
The
excellent horizontal sound dispersion.The speaker should be placed directly above or below the
television for optimal integration of audio and video information.
speakers are designed for excellent horizontal sound dispersion, so placement along the
SSC53000
center channel speaker was designed for very wide vertical dispersion as well as
arre
with the television and center
channel speaker in the middle. The
2
Page 4
Do
with
drinks or house plants
on the
If any foreign matter or
speaker, shut off the amplifier
speaker. then contact your
water
has gotten into
and
dealer
not
place
containers
liquids such
speakers
the
disconnect the
as
When the cabinet
becomes
it
cleaner
brush attachment.
with
a
and
dusty, clean
vacuum
soft
bristle
Do
not
remove the
and never remodel the
cap
cabinet or
-Let qualified
technicians check
your
components
speakers.
. . .
5.
Specifications
. .
description
Frequency Response
Sensitivity
Crossover Frequency
Crossover Networks
Nominal Impedance
Power
driver
Dimensions
Handling
Complement
terminal
-
45Hz - 2oKH.z
85.47 dB
2.9KHz
High-pass 1st
Low-pass
6n
8OW
Linaeum 1.5 dipole
1
1 6.5” shielded
34”hx8”wxlO”d
2.5V
applied/lm
order
1st order
EIA 256-A.
poly
1OOW
music
tweeter
woofer
DO NOT
tweeter!
use
dust
If tbe cabinet
cloth
dirt,
Twc-way bass reflex. dual
tuned
5oHz - 24KHz
88 dB 2.5V applied/lm
2.7KHz
High-pars 1st
Low-passmodified2ndader
6n
70W EIA 256-A,
1 Linaxm 2.0
2 5.25” shielded
6”h x
use
the
vacuum
cleaner on tbe
Blow on
a
can of compressed air to blow away
specks
and neutral detergent
then
wipe with a dry
front
18% x
becomes
ports.
order
tweeter
14”d
the tweeter
dirty, use a damp
to remove
cloth.
1OOW
music
poly
woofer
gently
or
the
3
Page 5
6 Troubleshooting
NEVER CONNECT OR DISCON;;FWERW$fKERS WITH THE AMPLIFIER
SWITCH
CONNBCTING OR DISCONNBCTING ANY WIRES.
1. If one of your speakers does not operate, follow this procedure:
a) switch the amplifier to STANDBY
b) check that both speaker wires are
speaker.
c) check that both speaker wires are.
amplifier.
d) check all interconnects/patch cords to ensure that they ate
e) check the identification labels on
is connected to the appropriate binding post.
t) check that the Center Channel select switch is set correctly for your application, i.e.,
“I Only” for one center channel speaker, or “I and II” for two center channel speakers.
g) switch the amplifier to ON and play the speakers to ensure all units are operating.
2. If the total sound output seems ill-defined the phase of one or more speakers may be. reversed at
the wiring connections. Listen to each speaker individually and, if any unit is out-of-phase, it will
produce sonic information that does not seem to have an point of origin. Switch the amplifier to
STANDBY (or OFF) and check to ensure that the marked wire connects to the positive (red and
red banded) binding posts of amp and speaker, and that the unmarked wire connects to the
negative (black and black
THIS
AMPLIPIBR TO STANDBY
banded)binding
BEFORE
(or OFF)
firmly
connected to binding posts in terminal cup of
fully
connected to binding posts on back panel of
firmly
connected.
the
back panel of the amplifier to ensure that the speaker
posts of amp and speaker.
3. If you are using the Toshiba XB-2000 surmund-sound amplifier, select the “Test Tones” output
of the amplifier GUI setup procedure to ensure each speaker is connected to the correct binding
posts. Refer to the applicable operating instructions for any other amplifier.
4. If these procedures do not eliminate the problem that you are experiencing, call the Toshiba
Customer Support Center at
(800)631-3811
and speak with a customer service agent.
Page 6
Page 7
TOSHIBA AMERICA CONSUMER PRODUCTS,
Head Office/82 Totowa Road, Wayne. NJ 07470
~2011628-8000
INC.
MANUFACTURED FOR
TOSHIBA AMERICA CONSUMER
PRODUCTS, INC.
TOSHIBA
Loading...