Toshiba SD-K760SU, SD-K760SC Service Manual

SERVICE MANUAL

DOCUMENT CREATED IN JAPAN, DECEMBER, 2005

DVD VIDEO PLAYER

FILE NO. 810-200596GR

SD-K760SU
SD-K760SC

The above model is classified as a green products (*1), as indicated by the underlined serial numbers.
This

Service Manual describes replacement parts for green products. When repairing any green

products,

For

TOSHIBA CORPORATION 2005

use the parts described in this manual and lead-free solder (*2).

(*1) and (*2), see the next page.

Dec. 2005 (TO) GREEN

(*1) GREEN PRODUCT PROCUREMENT

The EC is actively promoting the WEEE & RoHS Directives that define standards for recycling
and reuse of Waste Electrical and Electronic Equipment and for the Restriction of the use of
certain Hazardous Substances. From July 1, 2006, the RoHS Directive will prohibit any
marketing of new products containing lead.

Increasing attention is given to issues related to the global environmental. Toshiba Corporation
recognizes environmental protection as a key management tasks, and is doing its utmost to
enhance and improve the quality and scope of its environmental activities. In line with this,
Toshiba proactively promotes Green Procurement, and seeks to purchase and use products,
parts and materials that have low environmental impacts.

Green procurement of parts is not only confined to manufacture. The same green parts used in
manufacture must also be used as replacement parts.

(*2) LEAD-FREE SOLDER

This product is manufactured using lead-free solder as a part of a movement within the CE
industry at large to be environmentally responsible. Lead-free solder must be used in the servicing
and repair of this product.
The melting temperature of lead-free solder is higher than that of leaded solder by 86°F to 104°F
(30°C to 40°C). Use of a soldering iron designed for lead-based solders to repair product made
with lead-free solder may result in damage to the component and or PCB being soldered. Great
care should be made to ensure high-quality soldering when servicing this product  especially
when soldering large components, through-hole pins, and on PCBs  as the level of heat
required to melt lead-free solder is high.

WARNING

This product is manufactured using lead free solder.

DO NOT USE LEAD BASED SOLDER TO REPAIR THIS PRODUCT !