Toshiba RAS-13N3KV-E User Manual [ru]

OWNER’S MANUAL

ENGLISH

ESPAÑOL

FRANÇAIS

PORTUGUÊS

PУCСКИЙ

TÜRKÇE

AIR CONDITIONER (SPLIT TYPE)

For general public use Indoor unit

RAS-13, 18, 22N3KV Series Outdoor unit

RAS-13, 18, 22N3AV Series

1110650192

TSB 1110650192 (CVF).indd 1TSB 1110650192 (CVF).indd 1 08/06/12 3:04 PM08/06/12 3:04 PM

PRECAUTIONS FOR SAFETY

DANGER

• Do not install, repair, open or remove the cover. It may expose you to dangerous

voltages. Ask the dealership or the specialist to do this.

• Turning off the power supply will not prevent potential electric shock.

• The appliance shall be installed in accordance with national wiring regulation.

• Means for disconnection from the supply having a contact separation of at least

3 mm in all poles must be incorporated in the ﬁ xed wiring.

WARNING

• Do not expose your body directly to cool air for a long time.

• Do not insert your ﬁ nger or any article into the air inlet/outlet.

• When an abnormality (burning smell, etc.) occurs, stop the air conditioner and

turn off the circuit breaker.

• Installation must be requested from the supplying retail dealership or

professional installation vendors. Installation requires special knowledge and skill. If customers install on their own, it can be a cause of ﬁ re, electric shock, injury or water leakage.

• Do not select a location for installation where ﬂ ammable gas may leak. If there

is any gas leakage or accumulation around the unit, it can be a cause of ﬁ re.

• Do not turn ON/OFF the circuit breaker or operate buttons with a wet hand. It

may be a cause of electric shock.

• Do not disassemble, modify or relocate the unit by yourself. It may become the

cause of ﬁ re, electric shock, or water leakage. For repair or relocation, please request service from the supplying retail dealership or a Toshiba dealership.

• Do not select a location for installation where there may be excessive water or

humidity, such as a bathroom. Deterioration of insulation may be a cause of electric shock or ﬁ re.

• When relocating or repairing the unit, please contact the supplying retail

dealership. When there is a kink in the wiring, it may be the cause of electric shock or ﬁ re.

• During an error (such as a burning odor, not cooling, or not warming), stop

operating the unit and turn off the circuit breaker. Continuous operation may be a cause of ﬁ re, or electric shock. Please request repair or service from the supplying retail dealership or a Toshiba dealership.

• Earth work should be requested from the supplying retail dealership or

professional vendors. Insufﬁ cient grounding work may be the cause of electric shock. Do not connect the earth wire to a gas pipe, water pipe, lightning conductor, or telephone earth wire.

• If the indoor unit piping outlet is exposed due to relocation, close the opening.

Touching internal electrical parts may cause injury or electric shock.

• Do not insert any material (metal, paper, or water, etc) into the air outlet or

air intake opening. Fan may be rotating at high speed inside or there are high voltage sections, which may cause an injury or electric shock.

• You must use a independent power outlet for the power supply. If a power outlet

other than the independent outlet is used, it may cause a ﬁ re.

• When the air-conditioning unit does not cool or warm, there may be a leakage of

refrigerant. Please consult the supplying retail dealership. The refrigerant used in the air-conditioning unit is safe. It will not leak under normal operating conditions but if it leaks into the room and contacts a heat source such as a heater, or stove, it may cause a harmful reaction.

• When water or other foreign substances enter the internal parts, stop operating

the unit immediately and turn off the circuit breaker. Operating the unit continuously may cause ﬁ re or electric shock. Please contact the supplying retail dealership for repair.

• Do not clean the inside of the air-conditioning unit yourself. Please request

internal cleaning of the air-conditioning unit from the supplying retail dealership. Incorrect cleaning may cause breakage of resin parts or insulation defects of electrical parts, causing water leakage, electric shock or ﬁ re.

• Do not damage or modify the power cable. Do not connect the cable midway,

or use a multiple outlet extension cord that is shared by other devices. Failure to do so may cause ﬁ re.

• Do not place heavy objects on the power cable, expose it to heat, or pull it. To

do so may cause electrical shock or ﬁ re.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the

appliance.

• Do not use any refrigerant different from the one speciﬁ ed for complement or

replacement. Otherwise, abnormally high pressure may be generated in the refrigeration cycle, which may result in a failure or explosion of the product or an injury to your body.

CAUTION

• Check that the circuit breaker is installed correctly. If the circuit breaker is not

properly installed, it may cause an electric shock. To check the installation method, please contact the supplying retail dealership or the professional vendor who installed the unit.

• When using the unit in a closed room, or operating with other combustion

appliances, make sure to open a window occasionally for ventilation. Insufﬁ cient ventilation may cause suffocation due to a lack of oxygen.

• Avoid operating for long periods in a high humidity environment (over 80%) such

as with the windows or doors open. There may be condensation on the indoor unit and droplets may fall onto the furniture.

• When the unit won’t be used for a long time, turn off the main switch or the

circuit breaker.

• It is recommended that maintenance be performed by a specialist when the unit

has been operated for a long time.

• At least once a year check if the mounting table of the outdoor unit is damaged

or not. If a damaged state is ignored, the unit may fall or over-turn, causing an injury.

• Stand on a sturdy ladder when attaching/detaching the front panel/air ﬁ lter/air

cleaning ﬁ lter. Failure to do so may cause a fall or injury.

• Do not stand on the outdoor unit or place anything on the unit. It may be the

cause of injury due to falling or over-turning. Any damage to the unit may cause an electric shock or ﬁ re.

• Do not use combustion appliances in the direct ﬂ ow of the air from the air-

conditioning unit. Poor combustion of a combustion appliance may cause suffocation.

• Do not place anything around the outdoor unit or allow fallen leaves to

accumulate around it. If there are fallen leaves, small animals could enter and contact internal electrical parts, causing a failure or ﬁ re.

• Do not place animals and plants in places where wind from the air-conditioning

unit ﬂ ows directly. It may have a negative inﬂ uence on the animal or plant.

• Ensure that drained water is discharged. When the discharging water process

is not sufﬁ cient, water may leak, causing water damage to furniture. To check that the installation method used is correct, please contact the supplying retail dealership or the professional vendor who installed the unit.

• Do not place any containers such as a vase containing ﬂ uid on the unit. It might

cause water to enter the unit and deteriorate the electrical insulation, causing an electric shock.

• Do not use for special applications such as storage of food or animals, or to

display plants, precision devices, or art objects. Do not use on ships or in other vehicles. It may cause a failure in the air-conditioning unit. In addition, it may damage these items.

• Do not place other electrical appliances or furniture under the unit. Water

droplets might fall, causing damage or failure.

• When cleaning, you must stop operating the unit and turn off the circuit breaker.

Since the fan inside may be rotating at high speed, it may cause an injury.

• Do not wash the main air-conditioning unit with water. It may cause an electric

shock.

• After the front panel/air ﬁ lter is cleaned, wipe away any water and allow to dry. If

water remains, it may cause an electric shock.

• Once the front panel is removed, do not touch the metal parts of the unit. It may

cause an injury.

• Do not touch the air intake section or the aluminum ﬁ ns of the unit. It may cause

injury.

• When you hear thunder and there might be a lightning strike, stop operating the

unit and disconnect the circuit breaker. If lightning strikes, it may cause a failure.

• Batteries for remote control unit:

- Should be inserted with correct polarity (+) and (–).

- Should not be recharged. Do not use batteries for which the “Recommended usage period” has expired.

- Do not keep used batteries inside the remote control unit.

- Do not mix different types of batteries, or mix new batteries with old ones.

- Do not directly solder the batteries.

- Do not short-circuit, disassemble, heat, or throw batteries into a ﬁ re. If batteries are not disposed of correctly, they may burst or be the cause of ﬂ uid leakage, resulting in burns or injuries. If touching the ﬂ uid, wash thoroughly with water. If it touches devices, wipe off to avoid direct contact.

- Do not place within reach of small children. If a battery is swallowed, consult a doctor immediately.

• The manufacturer shall not assume any liability for the damage caused by not

observing the description of this manual.

INDOOR UNIT DISPLAY

1 Hi POWER (Green) 2 FILTER (Orange) 3 PRE.DEF (Preheat/Defrost) (Orange) 4 TIMER (Yellow) 5 OPERATION (Green) 6 RESET button

TSB 1110650192 (01_EN).indd 2TSB 1110650192 (01_EN).indd 2 08/06/12 2:59 PM08/06/12 2:59 PM

PREPARATION BEFORE USE

Preparing Filters

1. Open the air inlet grille and remove the air ﬁ lters.

2. Attach the ﬁ lters. (see detail in the accessory sheet).

Loading Batteries (when use wireless operation.)

1. Remove the slide cover.

2. Insert 2 new batteries (AAA type) following the (+) and (–) positions.

Clock Setup

1. Push

If timer indication is ﬂ ashing, go to the next step 2.

2. Press

3. Press

Remote Control Reset

Push by tip of the pencil or

1. Remove the batteries.

2. Press

3. Insert the batteries.

Note:

• Do not move the louver manually by others.

• The louver may automation positioning by some operation mode.

1 Infrared signal emitter 2 Start/Stop button 3 Mode select button (MODE) 4 Temperature button (TEMP) 5 Fan speed button (FAN) 6 Swing louver button (SWING) 7 Set louver button (FIX) 8 On timer button (ON) 9 Off timer button (OFF) ! Setup button (SET) " Clear button (CLR) # Memory and Preset button (PRESET) $ One-Touch button (ONE-TOUCH) % High power button (Hi-POWER) & Economy button (ECO) ( Quiet button (QUIET) ) Comfort sleep button (COMFORT SLEEP) ~ Filter reset button (FILTER) + Set clock button (CLOCK) , Check button (CHECK)

- Reset button (RESET)

Note:

• The provided Remote Controller is a wireless type, which also can be used as a wire. Please see “How to Connect The Remote Controller for Wired Operation”, located in installation instruction, in case of wired control is required.

• In wire operation, remote controller will return to initial condition (PRESET, TIMER and CLOCK will return to initial condition) when user shutdown power supply of Air conditioner.

Press the “ONE-TOUCH” button for fully automated operation that is customized to the typical consumer preferences in your region of the world. The customized settings control temperature air ﬂ ow strength, air ﬂ ow direction and other settings to provide you alternate contact with “ONE-TOUCH” of the button. If you prefer other settings you can select from the many other operating functions of your Toshiba unit.

Press

by tip of the pencil.

or : adjust the time.

: Set the time.

AIR FLOW DIRECTION

FIX

Press desired vertical direction.

Press automatically and press again to stop.

For horizontal direction, adjust manually.

: Move the louver in the

SWING

: Swing the air

REMOTE CONTROL

ONE-TOUCH

: Start the operation.

# 2 3

7 $

8 ) , +

ONE-TOUCH

COMFORT

SLEEP

SWING

FIX

FAN

QUIET

Hi POWER

6 5

( %

" 9 !

AUTOMATIC OPERATION

To automatically select cooling, heating or fan only operation

1. Press

2. Press

3. Press

1. Press

2. Press : Set the desired temperature. Cooling: Min. 17°C, Heating: Max. 30°C, Fan Only: No temperature indication

3. Press

For dehumidiﬁ cation, a moderate cooling performance is controlled automatically.

1. Press

2. Press : Set the desired temperature.

To automatically control room temperature and airﬂ ow for faster cooling or heating operation (except in DRY and FAN ONLY mode)

To automatically control room to save energy (except in DRY and FAN ONLY mode)

MODE

: Select A.

: Set the desired temperature.

FAN

HIGH

: Select AUTO, LOW , LOW+ , MED , MED+ , or

COOLING / HEATING / FAN ONLY OPERATION

MODE

: Select Cool , Heat , or Fan only .

FAN

or HIGH .

: Select AUTO, LOW , LOW+ , MED , MED+ ,

DRY OPERATION

MODE

: Select Dry .

Hi-POWER OPERATION

Hi POWER

Press

: Start and stop the operation.

ECO OPERATION

Press : Start and stop the operation.

Note: Cooling operation; the set temperature will increase automatically 1 degree/

hour for 2 hours (maximum 2 degrees increase). For heating operation the set temperature will decrease.

TEMPORARY OPERATION

In case of the misplaced or discharged remote control

• Pressing the RESET button, the unit can start or stop without using the remote control.

• Operation mode is set on AUTOMATIC operation, preset temperature is 25°C and fan operation is automatic speed.

TIMER OPERATION

Set the timer when the air conditioner is operating.

Setting the ON Timer Setting the OFF Timer

Press : Set the desired

ON timer.

Press : Set the timer. Press : Set the timer.

Press : Cancel the timer. Press : Cancel the timer.

Daily timer allows the user to set both the ON & OFF timers and will be activated on a daily basis.

Setting Everyday Timer

Press : Set the ON timer.

Press : Set the OFF timer.

• During the every day timer is activating, both arrows (

Note:

• Keep the remote control in accessible transmission to the indoor unit; otherwise, the time lag of up to 15 minutes will occur.

• The setting will be saved for the next same operation.

Press

timer.

: Set the desired OFF

Press .

Press : button during the (

or ) mark ﬂ ashing.

, ) are indicated.

TSB 1110650192 (01_EN).indd 3TSB 1110650192 (01_EN).indd 3 08/06/12 2:59 PM08/06/12 2:59 PM

+ 4 hidden pages