Toshiba IPSe32-X, IPSe8-X, NVSe16-X, NVSe32-X, NVSe64-X User Manual
...
IPSe - NVSe
Network Video Recorder
Software Manual
model no.
IPSe8-X
IPSe16-X
IPSe32-X
NVSe8-X
NVSe16-X
NVSe32-X
NVSe64-X
Please carefully read these instructions before using this product.
Save this manual for future use.
1
ii
Surveillix™ IPS/NVS
Software Manual (Version 4.5)
Manual Edition 29944AF – SEPTEMBER 2011
Printed in USA
No part of this documentation may be reproduced in any means, electronic or mechanical, for any purpose, except as expressed in
the Software License Agreement. Toshiba shall not be liable for technical or editorial errors or omissions contained herein. The
information in this document is subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND. THE ENTIRE RISK
ARISING OUT OF THE USE OF THIS INFORMATION REMAINS WITH RECIPIENT. IN NO EVENT SHALL TOSHIBA BE LIABLE
FOR ANY DIRECT, CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE, OR OTHER DAMAGES WHATSOEVER
(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR LOSS
OF BUSINESS INFORMATION), EVEN IF TOSHIBA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND
WHETHER IN AN ACTION OR CONTRACT OR TORT, INCLUDING NEGLIGENCE.
This software and documentation are copyrighted. All other rights, including ownership of the software, are reserved to DVR Support
Center. TOSHIBA, and Surveillix are registered trademarks of TOSHIBA CORPORATION in the United States and elsewhere;
Windows, and Windows 2000 are registered trademarks of Microsoft Corporation. All other brand and product names are
trademarks or registered trademarks of the respective owners.
The following words and symbols mark special messages throughout this guide:
WARNING: Text set off in this manner indicates that failure to
follow directions could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to
follow directions could result in damage to equipment or loss of
information.
29944AG iii
iv
Table of Contents
NVR BASICS ................................................................................................................................................................. 9
Setting the Time and Date ....................................................................................................................................... 10
Accessing the DVR Utility ........................................................................................................................................ 10
Exporting DVR Settings ................................................................................................................................. 10
Importing DVR Settings ................................................................................................................................. 11
Changing Video Format ................................................................................................................................. 11
Display Screen ........................................................................................................................................................ 12
Live Camera Options ..................................................................................................................................... 12
CPU Meter ..................................................................................................................................................... 12
Camera View ........................................................................................................................................................... 13
Recording Status Indicator ............................................................................................................................. 13
Special Recording .......................................................................................................................................... 13
Edit Live View Channels .......................................................................................................................................... 14
Screen Division Buttons .......................................................................................................................................... 14
64 Channel Screen Division ........................................................................................................................... 15
Custom Live View Divisions ........................................................................................................................... 15
SETUP OPTIONS ........................................................................................................................................................ 16
Setup Overview ....................................................................................................................................................... 17
Camera Setup ......................................................................................................................................................... 18
Network Video ......................................................................................................................................................... 19
Connecting a Network Device ........................................................................................................................ 19
Connecting Manually ....................................................................................................................... 19
Connecting with Camera Finder ...................................................................................................... 19
Assigning a Network Device to a Channel ..................................................................................................... 20
Assigning Audio Channels to a Network Device ............................................................................................ 21
Camera Configuration .................................................................................................................................... 22
Enable/Disable Live Video ............................................................................................................... 22
Displaying More Columns ................................................................................................................ 22
Accessing the Configuration Menu .................................................................................................. 22
Upgrade and Registration .............................................................................................................................. 23
Locating the System ID ................................................................................................................... 23
Obtaining the Unlock Code .............................................................................................................. 23
Unlocking the Upgrade .................................................................................................................... 24
Unlocking New Network Device ..................................................................................................................... 24
Motion Setup ........................................................................................................................................................... 25
Create a Motion Area ..................................................................................................................................... 25
Regular Interval Recording ............................................................................................................................ 26
General Setup ......................................................................................................................................................... 26
Voice Warning ............................................................................................................................................... 27
Connecting to a Wide Screen Display............................................................................................................ 27
Connecting a Second Monitor ........................................................................................................................ 27
Volume ........................................................................................................................................................... 28
Hybrid Sensor Setup ...................................................................................................................................... 28
Auto Sequence Setting .................................................................................................................................. 29
Create Custom Auto Sequence ....................................................................................................... 29
29944AG v
Schedule Setup ....................................................................................................................................................... 30
Recording Schedule ...................................................................................................................................... 30
Sensor Schedule ........................................................................................................................................... 31
Create a Recording Schedule ........................................................................................................................ 32
Create a Sensor Schedule ............................................................................................................................. 32
Scheduling Alarm Events ................................................................................................................ 32
Emergency Agent Schedule ............................................................................................................ 32
Special Day Schedule .................................................................................................................................... 33
Creating/Editing a ‘Special Day’ Schedule ...................................................................................... 33
Deleting a ‘Special Day’ Schedule ................................................................................................... 33
System Restart Setup .................................................................................................................................... 34
Create System Restart Schedule .................................................................................................... 34
Network Setup ......................................................................................................................................................... 35
Administrative Setup ............................................................................................................................................... 36
Disk Management .......................................................................................................................................... 36
Setting Up DDNS ........................................................................................................................................... 37
Enable DDNS .................................................................................................................................. 37
Set the IP Address ........................................................................................................................... 37
User Management ......................................................................................................................................... 38
Add a New User .............................................................................................................................. 38
User Rank ....................................................................................................................................... 39
Changing the Administrator Password ........................................................................................................... 39
Default Administrator Password ...................................................................................................... 39
Log Management ........................................................................................................................................... 39
Setup Log Management Options ..................................................................................................... 39
Status Check / Email...................................................................................................................................... 40
General ............................................................................................................................................ 40
Users ............................................................................................................................................... 40
Storage Check ................................................................................................................................. 41
Recording Data Check .................................................................................................................... 41
SMART Information ......................................................................................................................... 42
SMART Alert .................................................................................................................................... 42
Alarm Event ..................................................................................................................................... 43
MySurveillix ..................................................................................................................................... 43
Information .............................................................................................................................................................. 44
Instant Recording .................................................................................................................................................... 44
Activate Instant Recording ............................................................................................................................. 44
Searching ‘Instant Recorded’ Video ............................................................................................................... 44
SEARCH ...................................................................................................................................................................... 45
Search Overview ..................................................................................................................................................... 46
Play Controls ................................................................................................................................................. 46
Adjust the Brightness of an Image ................................................................................................................. 47
Zooming in on an Image ................................................................................................................................ 47
Zooming in on a Portion of an Image ............................................................................................................. 47
Open Video from a Saved Location ............................................................................................................... 47
Time Sync ...................................................................................................................................................... 47
Clean Image .................................................................................................................................................. 47
Performing a Basic Search ...................................................................................................................................... 48
Printing an Image .................................................................................................................................................... 48
Daylight SAVIng Time ............................................................................................................................................. 48
vi
Save to JPG or AVI ................................................................................................................................................. 49
Bookmarks ..................................................................................................................................................... 50
Modify Bookmarks ........................................................................................................................... 50
Single Clip Backup ......................................................................................................................................... 51
Single Clip Backup Using Bookmark Data ....................................................................................... 51
Index Search ........................................................................................................................................................... 52
Performing an Index Search .......................................................................................................................... 52
Index Search Results Display ........................................................................................................................ 52
Preview Search ....................................................................................................................................................... 53
Performing a Preview Search ........................................................................................................................ 54
Graphic Search ....................................................................................................................................................... 54
Performing a Graphic Search ........................................................................................................................ 54
Object Search .......................................................................................................................................................... 55
Performing an Object Search ......................................................................................................................... 55
Motion Search ......................................................................................................................................................... 56
Performing a Motion Search .......................................................................................................................... 56
Audio Playback ........................................................................................................................................................ 56
Search in Live .......................................................................................................................................................... 57
PAN / TILT / ZOOM ..................................................................................................................................................... 58
Pan / Tilt / Zoom Overview ...................................................................................................................................... 59
Enable the PTZ Settings ................................................................................................................................ 59
Advanced PTZ Setup .............................................................................................................................................. 60
Creating and Viewing Preset Positions .......................................................................................................... 60
Creating a Preset ............................................................................................................................. 60
Viewing a Preset .............................................................................................................................. 60
PTZ Address Settings .................................................................................................................................... 61
Accessing PTZ Menus ............................................................................................................................................ 61
Controlling a PTZ camera ....................................................................................................................................... 62
Using the Graphical PTZ Controller ............................................................................................................... 62
Using the On-Screen Compass ..................................................................................................................... 63
Understanding Tours ............................................................................................................................................... 63
PTZ Tour Schedule ........................................................................................................................................ 64
Create PTZ Tour Schedule .............................................................................................................. 64
BACKING UP VIDEO DATA ....................................................................................................................................... 65
Backup Overview .................................................................................................................................................... 66
Nero® Express ............................................................................................................................................... 66
General Screen Overview .............................................................................................................................. 67
Performing a General Backup ......................................................................................................... 67
Clip Screen Overview .................................................................................................................................... 68
Performing a Clip Backup ................................................................................................................ 68
Scheduled Screen Overview .......................................................................................................................... 69
Performing a Scheduled Backup ..................................................................................................... 69
Specifying Scheduled Backup Drives .............................................................................................. 69
LAN / ISDN / PSTN CONNECTIONS .......................................................................................................................... 70
LAN Overview ......................................................................................................................................................... 71
Connecting to a LAN Using TCP/IP ......................................................................................................................... 71
Configuring TCP/IP Settings .......................................................................................................................... 71
29944AG vii
LDAP INTEGRATION .................................................................................................................................................. 72
Features .................................................................................................................................................................. 73
Installing LDAP ........................................................................................................................................................ 73
WEB VIEWER .............................................................................................................................................................. 75
Web Viewer Overview ............................................................................................................................................. 76
Configuring the Server for Remote Connection ............................................................................................. 77
Connecting to a Recorder Using Web Viewer ................................................................................................ 77
Closing the Web Viewer ................................................................................................................................. 77
INCLUDED SOFTWARE SETUP ................................................................................................................................ 78
iPhone App Overview .............................................................................................................................................. 79
Minimum Requirements ................................................................................................................................. 79
Application Features ...................................................................................................................................... 79
Downloading the App .............................................................................................................................................. 79
recorder Configuration ............................................................................................................................................. 79
Add a DVR Site ....................................................................................................................................................... 79
View Live Video ....................................................................................................................................................... 80
Emergency Agent Overview .................................................................................................................................... 81
Configuring the Recorder ............................................................................................................................... 81
Configuring the Client PC .............................................................................................................................. 81
Setup Window ................................................................................................................................................ 82
Emergency Agent Window ...................................................................................................................................... 82
Filter Event List .............................................................................................................................................. 82
Add Items to Alarm Confirm List .................................................................................................................... 83
Search Alarm Window ............................................................................................................................................. 84
View Recorded Video .................................................................................................................................... 84
Export Video .................................................................................................................................................. 84
Remote Software Overview ..................................................................................................................................... 85
Remote Software Setup ................................................................................................................................. 86
Installing Remote Software .............................................................................................................. 86
Create a New Remote Connection .................................................................................................. 86
Configuring the Recorder ................................................................................................................ 87
Configuring the Server for Remote Connection ............................................................................... 87
Digital Verifier Overview .......................................................................................................................................... 88
Installing the Digital Verifier ........................................................................................................................... 88
Using the Digital Verifier ................................................................................................................................ 88
Backup Viewer Overview ........................................................................................................................................ 89
Installing Backup Viewer ................................................................................................................................ 89
Loading Video from DVD or Hard Drive ......................................................................................................... 89
SOFTWARE UPGRADES ........................................................................................................................................... 90
SCS Overview ......................................................................................................................................................... 91
Purchasing SCS Software Upgrade ............................................................................................................... 91
Configuring the Server for Remote Connection ............................................................................................. 91
Connecting to a Recorder .............................................................................................................................. 91
viii
NVR BASICS
This chapter includes the following information:
Becoming familiar with the Display screen
Defining Screen Divisions
29944AG 9
SETTING THE TIME AND DATE
1. Exit to Windows by clicking the Exit button from the Display screen and selecting Restart in Windows Mode. (See the Display
screen section later in this chapter)
2. Open Windows Explorer. Do this by right-clicking the My Computer Icon (located on the top left hand corner of the Desktop) and
select Explore.
3. Click on Control Panel to open it. If you do not see Control Panel listed, Click My Computer to expand the folder tree.
4. Double Click on Date and Time inside Control Panel.
5. Adjust the Date and Time.
6. When finished, close all open windows and restart the recorder. Do this by clicking the Start button (Located on the lower left
hand side of the Desktop) and selecting Shut Down
ACCESSING THE DVR UTILITY
Exporting DVR Settings
Exporting DVR settings can help configure multiple DVRs quickly or reconfigure a unit that has failed. Some things must be kept in
mind when using this feature.
You cannot use this function on:
1. Exit to Windows by clicking Exit on the Display screen then and select Restart in Windows Mode. (See the Display screen
3. Click Export in the System Setting tool section.
4. Select a location to save the settings file and click Save. The
DVRs that are different models.
When upgrading from certain software versions. (This feature cannot be used when upgrading from v2.x to v3.x)
section later in this chapter)
2. Open the DVR Utility window by clicking the Start button
clicking All Programs, clicking Surveillix, and then clicking
vFormat.
DVR Utility will export the DVR settings and automatically
close.
,
10
Importing DVR Settings
1. Exit to Windows by clicking Exit on the Display screen then and select Restart in Windows Mode. (See the Display screen
section later in this chapter)
2. Open the DVR Utility window by clicking the Start button
vFormat.
3. Click Import in the System Setting Tool section.
4. Select the location of the settings file to import and click Open.
5. Click Yes to import the data file.
, clicking All Programs, clicking Surveillix, and then clicking
Changing Video Format
1. Exit to Windows by clicking Exit on the Display screen then and select Restart in Windows Mode. (See the Display screen
section later in this chapter)
2. Open the DVR Utility window by clicking the Start button
vFormat.
3. Select the appropriate video setting from the list in the Video Setting section – NTSC or PAL..
4. Click Set.
, clicking All Programs, clicking Surveillix, and then clicking
29944AG 11
DISPLAY SCREEN
Each time the recorder starts, the program defaults to the Display screen. The following diagram outlines the buttons and features
used on the Display screen. You should become familiar with these options as this is the screen that will be displayed the majority of
the time.
Opens:
Search Display
Backup Center
PTZ Controller
Opens Setup Display
Screen Division buttons
CPU meter
Sensor Status
Relay Outputs
Live Camera Options
Right-click a camera on the Display screen to display these options:
Full Screen
Instant Recording
Search In Live
Digital Zoom
CPU Meter
Use the CPU meter to monitor the system resources on your recorder.
GREEN - System configuration OK
YELLOW - Caution; evaluate system configuration
and consider decreasing system loading
RED - System configuration has been exceeded
which may affect stability; decrease system loading
or upgrade system with CPU performance package.
Current Date /
Time
12
CAMERA VIEW
Recording Status
Special Recording Type
INSTANT
Camera No. and Name
Recording Status Indicator
The camera status for each camera is displayed in the upper right corner on the Video Display Area. The following are the different
states for each camera:
Recording Displayed when the camera is currently being recorded to the recorder.
Motion Detection Displayed when a camera (set up for motion detection) detects motion.
Display Displayed when the camera is currently not being recorded to the recorder.
Special Recording
There are two types of Special Recording. Text is displayed on the camera indicating what type of Special Recording is activated.
SENSOR Sensor is displayed when a sensor, associated with a given camera, is activated.
INSTANT Instant Recording is a manual activation of the recording for the selected camera. Regardless of the recording method,
Instant Recording will start the camera recording and also flag the video for future searches using the Index Search
feature. INSTANT is displayed when a user activates the instant recording option. Double Right-Click the video display
to activate and deactivate the Instant Recording option.
29944AG 13
EDIT LIVE VIEW CHANNELS
By default, the recorder only allows live video from four network channels at one time on the local server. This protects the processor
resources for recording data. The SCS Multi-Site Monitoring software allows you to view live video from multiple recorders at once and
has no limitation on the number of live IP based video channels. If more than four channels of live video are required on the local
server, you can enable the recorder to show up to 16 channels. Be aware that displaying 16 channels of live IP based video is
resource intensive and may dramatically impa ct system performance.
Note The Edit Live View Channels option is not available on the 64 channel NVS.
To enable the recorder to view 16 channels of live video:
1. Click Exit on the display screen and select Rest art in Windows Mode.
2. Double-click the Edit Live View Channels icon on the desktop.
3. If you wish to continue, click Yes on the warning window.
The live view display will switch to 16 channel mode. To return the recorder to 4 channel mode, run the utility again using the same
instructions.
SCREEN DIVISION BUTTONS
Note When viewing live video from Network Cameras, only 4CH will display at one time. If more live view channels are
required on the local server, see the Edit Live View Channels instructions.
1st Four Cameras View – Displays cameras 1-4 in the Video Display Area. To return to a different Multi-Camera View,
select a different Screen Division option from the Screen Division menu.
2nd Four Cameras View – Displays cameras 5-8 in the Video Display Area. To return to a different Multi-Camera View,
select a different Screen Division option from the Screen Division menu.
3rd Four Cameras View – Displays cameras 9-12 in the Video Display Area. To return to a different Multi-Camera
View, select a different Screen Division option from the Screen Division menu.
4th Four Cameras View – Displays cameras 13-16 in the Video Display Area. To return to a different Multi-Camera
View, select a different Screen Division option from the Screen Division menu.
1st Nine Cameras View – Displays cameras 1-9 in the Video Display Area. To return to a different Multi-Camera View,
select a different Screen Division option from the Screen Division menu.
2nd Nine Camera View – Displays cameras 8-16 in the Video Display Area. To return to a different Multi-Camera View,
select a different Screen Division option from the Screen Division menu.
All Camera View – Displays all 16 cameras within the Vid eo Display Area.
Full Screen – The Full Screen Option allows you to view the Video Display Area using the entire viewable area on the
monitor. When this is selected, no menu options are visible. You can activate the Full Screen Option by clicking on the
Full Screen button within the Screen Division menu. You can deactivate Full Screen mode by right clicking on the
screen.
Auto Sequence – Sequences through the Screen Divisions sets. For example, selecting the 1A and then the Loop
button will sequence through 1A, 2A, 3A, 4A and then repeat. This option is not available for the 7, 10 and 13 screen
divisions.
14
t
64 Channel Screen Division
To access channels 17-32, 33-48, and 49-64 on a 64 channel NVS:
1. Mouse over the channel section indicator next to the screen division buttons. The channel section will display as 16X 1, 16X2,
16X 3, and 16X4 to indicate the channel section you are currently viewing
2. Click the desired channel section.
Custom Live View Divisions
Customize your Live View screen by changing the order of the cameras. Each screen division can be individually customized but a
camera can only be displayed once (once in 4 camera view, once in 9 camera view, etc). Both analog and IP video cameras can be
moved.
Create custom live view divisions:
1. On the Display screen click Setup, and then click General.
2. Click Sequence Setting.
3. Drag and drop cameras from the Channel List to the desired location within the Division Group (4 Division, 9 Division, 16
Division).
Channel Lis
Division Group
29944AG 15
SETUP OPTIONS
This chapter includes the following information:
Setup Overview
Camera Setup
Network Video
Motion
Schedule
Network
Administrative
Information
PTZ
16
SETUP OVERVIEW
The Setup options allow you to optimize your recorder by adjusting things like camera
names, reboot schedules, recording schedules and more. It is extremely important that you
setup your recorder correctly for several reasons.
Recording Schedules – By optimizing the recording schedule you can increase the
amount of pertinent recorded video that is saved on the recorder and keep it longer.
You can optimize the type of recording done by adding motion detection to this as
well, again increasing the amount of useful video.
Recorder Access – By setting up the access passwords you can tightly control the
types of access an individual may have. This ensures the security and integrity of the
recorder.
Camera Naming – By naming each camera you can easily identify the location and
any other pertinent information that may be helpful simply by viewing it on the Video
Display Area.
29944AG 17
play
CAMERA SETUP
Define Camera Name
Selected Camera
Dis
Select Camera Selects the camera to be edited.
Selected Camera Display Displays the live camera feed from the camera selected.
Sensor Connection Specify which sensors are currently in use.
Camera Name Specify a name for each camera.
18
A
r
NETWORK VIDEO
Connected Devices
Connecting a Network Device
Connecting Manually
1. From the Display screen, click Setup.
2. Click Network Video.
3. Click the Add/Remove Device tab.
4. Select your network device from the Device Type list.
5. Type a Device Name.
6. Type the IP/URL address, Port#, User ID and Password of the device.
7. Click Add.
Connecting with Camera Finder
1. From the Display screen, click Setup.
2. Click the Network Video tab.
3. Click the Add/Remove Device tab.
4. Click Find Cameras to automatically find all connected Network cameras.
5. Select the check box next to the desired camera.
6. Click Get Device.
7. Type the User ID and Password of the device.
8. Click Update.
utomatic Camera Finde
29944AG 19
Assigning a Network Device to a Channel
1. From the Display screen, click Setup.
2. Click Network Video.
3. Click the Channel Setup tab.
4. Click an available channel on the Channel List.
5. Type the desired Position Name.
6. On the Select Device list, select the appropriate network device added previously.
7. If the device has PTZ capabilities, select the PTZ Camera check box to enable.
8. If the device displays wide screen video, select the Wide Screen check box to allow it to display properly.
9. If supported, select the Use Network Camera Motion Detection check box.
Note The Use Network Camera Motion Detection check box will only display when a compatible network camera is
connected to the recorder.
10. Select Intensive Motion, Intensive Sensor, and/or Intensive Instant to increase the recording rate on an event.
Tip If you select the Intensive Motion, Intensive Sensor, or Intensive Instant check box when configuring the channel, the
recording rate will increase on that channel when a motion, or sensor event occurs or when instant recording is turned on.
11. Click Apply to save your selections.
20
Assigning Audio Channels to a Network Device
1. From the Live View screen, click Setup.
2. Click Network Video.
3. Click the Audio Setup tab.
4. Click an available audio channel on the Channel List.
5. On the Select Device list, select a network device added previously.
6. To record the network audio select the Record Network Audio check box. The recorder will record incoming audio from the
selected camera and the audio channel will be available on the search screen.
7. To access the audio channel from the Live View screen, select the Enable Network Video in Live View check box. This will
allow users to listen to live audio from compatible connected cameras.
29944AG 21
Camera Configuration
The Camera Configuration tab displays information on all cameras (analog and network) connected to the Surveillix recorder
Note The maximum bit rate with a non-RAID recording solution is 90megabits per second.
Enable/Disable Live Video
To enable a network device to display as live video select the check box next to the Camera Name that you want available for
live video display.
To disable live video for a network device, clear the check box next to the Camera Name.
Note If you have dual monitors enabled, the second monitor may show the last frame of video. If you change the screen
division view the frame will clear and you will see the black Non-Decoding screen.
Displaying More Columns
The Camera Configuration tab can be customized to display the information you use most. Click Select Column to add or remove
specific columns.
Capture FPS
Record FPS
Schedule
Manufacturer
Model
IP Address
Port Number
Resolution
Record FPS
Frame Rate
Codec
Quality
PTZ
Accessing the Configuration Menu
Use the Surveillix interface to access basic network device menu functions.
1. From the Display screen, click Setup.
2. Click Network Video.
3. Click the Camera Configuration tab.
4. Highlight the desired camera.
5. Click Setup Network Device.
Note When connecting to an IK-WB21A, ensure that the flip image option is not selected.
22
Upgrade and Registration
Have the following information available before registering.
Software Serial Number: That product Serial Number is the unique number that Toshiba provided with the purchase software.
System ID: The System ID is a number that is generated by the Surveillix unit. This is a unique code generated using the MAC
address of the computer running the software. The following steps illustrate how to obtain a unique System ID.
Locating the System ID
1. From the Display screen, click Setup.
2. Click Network Video.
3. Click the License tab.
4. Click Copy to copy the System ID to the system clipboard so it is available when you go to the reg istration website.
Obtaining the Unlock Code
1. Open an Internet browser and go to: http://register.surveillixdvrsupport.com/
2. Type the Product Serial Number that was provided by Toshiba.
3. Type the System ID generated by the recorder.
4. Click Submit.
29944AG 23
5. Verify the information.
6. Click Next if the information provided is correct.
7. Once validated, the user will be provided with the Unlock Code.
8. Print the page and save for later reference.
Unlocking the Upgrade
1. Return to Setup > Network Cameras > License.
2. Enter the Unlock Code generated by the Surveillix Registration Site into the License Key box.
3. Click Register and confirm that the new License Key is listed in the Channel Connection License box.
4. Click OK.
Unlocking New Network Device
Follow the instructions above for registering the NVR upgrade to unlock any additional network devices.
24
t
t
t
MOTION SETUP
The recorder allows the user to adjust several different Motion Settings and create motion detection areas.
Display full screen video
pop up on motion even
Beep on motion even
Display full screen video
pop up on sensor even
Schedule recording at a regular specified interval
Reduces Analog Signal Noise from Motion Detection
(not available for network cameras)
Create a Motion Area
1. Click Motion in Setup.
2. Select a camera from the Select Camera list.
3. Select the Detect Detail Motion Area check box.
4. Click Clear.
5. Click Advanced Motion Area Setup.
6. Click a Motion Detection Area shape button.
7. Drag the mouse over the camera image.
Note To create a polygon shape, click the mouse at each point
and double-click to close the shape.
8. Click OK.
9. Move the sliders to adjust motion sensitivity and the noise filter.
10. Define the pre-alarm and post-alarm recording time for a motion
event.
Pre Alarm – 0 > 50 Seconds [The number of seconds the recorder
records before motion is detected]
Post Alarm (MOTION) – 0 > 50 Seconds [The number of seconds
the recorder records after motion is detected]
29944AG 25
Regular Interval Recording
Regular Interval Recording allows users to record a single frame every few minutes or hours when there is no motion. This option is
only available when Motion recording or Sensor recording is selected in the recording schedule.
Note Regular Interval Recording is only supported by the MJPEG codec. See Frame Setup for more information on selecting
the recording codec.
To enable Regular Interval Recording:
1. Select the Regular Interval Recording check box.
2. Specify how often to take an image when no motion is occurring. Users can go as little as one image per second.
GENERAL SETUP
Function
Beep on Login Fail Enables the recorder to beep continuously in response to a failed login attempt. Only an authorized
login will stop the beeping.
Sequence Setting Allows the video out picture to automatically cycle through channels at a set speed. Example: .Cycle
through channels 1-6 at four-second intervals.
Dual Monitor The dual monitor options will display when a second monitor is connected to the recorder.
Display Options
Use Full Screen Stretch the Surveillix interface to use the full monitor screen.
Display Size Select from available monitor display sizes. Use to correctly display video on wide screen monitors.
26
Voice Warning
The recorder allows users to play a sound file when either a Motion event or Sensor event occurs. This file can be a custom created
sound file that is unique to the application. The selected WAV file is played through speakers attached to the recorder.
1. Click the Open Sound File icon to browse for a WAV file. The selected file will display in the box on the left.
2. Click the Test icon to verify the audio file.
3. Select Motion Event and/or Sensor Event to trigger the audio file.
Open Sound File
Test
Connecting to a Wide Screen Display
1. Click Exit on the Display screen and select Exit in Windows Mode.
2. Right-click the Desktop and select Screen Resolution.
3. From the Resolution list, select the proper resolution of the connected display.
Tip Refer to the display documentation for the proper resolution settings.
4. Click OK and confirm the change.
5. Double-click the Surveillix Server icon on the Desktop.
6. Click Setup on the Display screen and then click General.
7. Under Display Settings, select the Use Full Screen check box and then select the correct resolution from the Display Size list.
8. Click Apply.
Connecting a Second Monitor
All Surveillix recorders can support two connected monitors. If a second monitor is connected to the recorder, follow these steps to
enable the Dual Monitor settings.
1. Click Exit on the Display screen and select Exit in Windows Mode.
2. Right-click the Desktop and select Screen Resolution.
3. Click the secondary display screen and from the Multiple displays list click Extend these displays.
4. Click Apply.
5. On the Resolution list, select the proper resolution of the connected display.
Tip Refer to the display documentation for the proper resolution settings.
6. Click OK and confirm the change.
7. Double-click the Surveillix Server icon on the Desktop.
8. Click Setup on the Display screen and then click General.
9. Under Function, select the Dual Monitor check box.
10. Click Apply.
29944AG 27
Volume
The volume control allows fine tuning of the volume settings on the recorder.
Volume Options:
Speakers – Used to adjust the volume for all sound coming
from the system’s speakers
System Sounds – Used to adjust the volume for the
system sounds exclusively.
Hybrid Sensor Setup
This interface is used to link Hard Contact Sensor Inputs from supported Network Devices to the recorder software.
The Network Device List is a list of available IP camera devices that have sensors enabled. When a device is selected, the lower
table will populate with a list of the sensors for the device.
Click the arrow next to a sensor or relay to display the number of the sensor on the DVR. You can then associate a sensor or relay
from the DVR with a sensor or relay on the network device.
28
Loading...