Toshiba MW20FP3, MW24FP3 User Manual

DIGITAL VIDEO

Introduction

2

COMBINATION FLAT COLOR
TELEVISION AND VIDEO CASSETTE
RECORDER / DVD VIDEO PLAYER

MW20FP3
MW24FP3

OWNER’S MANUAL

Connections

Basic setup

TV operation

Playback

(VCR)

Recording

(VCR)

Other functions

(VCR)

Basic playback

(DVD)

13

18

23

33

38

42

44

Illustration of MW20FP3

©2004 Toshiba Corporation
This device does not tape-record copy protected DVD video discs.

Advanced

playback

(DVD)

Function setup

(DVD)

Others

47

53

57

5L00301C [E]Cover 20/4/04, 16:111

Introduction

IMPORTANT SAFEGUARDS

The lightning flash with arrowhead symbol, within an equilateral

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SER VICING TO
QUALIFIED SERVICE PERSONNEL.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

triangle is intended to alert the user to the presence of
uninsulated dangerous voltage within the product's
enclosure that may be of sufficient magnitude to constitute a risk
of electric shock.

The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompa­nying the appliance.

- Reorient or relocate the receiving antenna.

- Increase the distance between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with

the FCC (Federal Communications Commission) Rules could void the user's authority to operate
this equipment.

COPYRIGHT: It is permissible to record television programs, films, video tapes and other material only in the

event that third party copyrights and other rights are not violated.

CAUTION:

THIS DIGIT AL VIDEO PLAYER EMPLOYS A LASER SYSTEM.

Location of the required Marking

The rating sheet and the safety caution
are on the rear of the unit.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE
READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN
FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE
MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LO­CATION-SEE SER VICE PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORM­ANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPO-

LINE 1 IN

OUT PUT

SURE.

VHF/UHF

VIDEO

VIDEO

DIGITAL AUDIO

(MONO)

L

L

COAXIAL

AUDIO

AUDIO

R

R

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT
TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIA­TION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED.
DO NOT ST ARE INT O BEAM.

CERTIFICATION: COMPLIES WITH
FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.

2

5L00301C [E]p02-05 20/4/04, 16:112

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning the exterior cabinet only.

6. A TTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause
hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.

8. ACCESSORIES

PORT ABLE CAR T WARNING

(symbol provided by RETAC)

Do not place this unit on an unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury, and serious damage to the unit.

8A. An appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation,
and to ensure reliable operation of the unit, and to protect it from overheating.

S3126A

These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to.

10. POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other sources, refer to the respective pages on this Own­er's Manual for their operating instructions.

11. GROUNDING OR POLARIZA TION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Instead of the polarized alternating-current line plug, your unit may be
equipped with a 3-wire grounding-type plug (a plug having a third (grounding) pin). This plug will only fit into
a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.

Introduction

5L00301C [E]p02-05 20/4/04, 16:123

3

Introduction

IMPORTANT SAFEGUARDS

13. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
unit due to lightning and power line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,
as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the
National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode.

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
For example:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the

unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance, this indicates a need for service.

19. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.

20. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.

21. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.

22. DISC TRAY

Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.

23. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's
manual of the other equipment carefully and follow the instructions when making any connections.

24. SOUND VOLUME

Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume
sound may cause hearing or speaker damage.

25. SOUND DISTORTION

Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire.

26. HEADPHONES

When you use the headphones, keep the volume at a moderate level. If you use the headphones continu­ously with high volume sound, it may cause hearing damage.

4

(Continued)

5L00301C [E]p02-05 20/4/04, 16:124

27. LASER BEAM

Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the
laser beam. It may cause sight damage.

28. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.

29. NOTE TO CABLE TV SYSTEM INSTALLER

This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con­nected to the grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

ANTENNA LEAD
IN WIRE

GROUND

CLAMP

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

Introduction

ELECTRIC SERVICE

EQUIPMENT

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

NEC-NATIONAL ELECTRICAL CODE

S2898A

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

IMPORTANT RECYCLING INFORMATION

This product uses both Cathode Ray T ube (CRT) and other components that contain lead. In
your community there might be regulations that require you to dispose these materials
properly under environmental considerations. Please contact your local authorities, or the
Electronic Industries Alliance (http://www.eiae.org) for disposal or recycling information.

Power source

TO USE AC POWER SOURCE

Wider Hole
and Blade

Polarized AC Cord Plug
(One blade is wider than the other.)

AC Outlet

Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug
into a standard 120V 60Hz polarized AC outlet.

Notes:

Never connect the AC line cord plug to other than the specified voltage (120V

•
60Hz). Use the attached power cord only.
If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to

•
file or cut the blade. It is the user’s responsibility to have an electrician replace the
obsolete outlet.
If you cause a static discharge when touching the unit and the unit fails to function,

•
simply unplug the unit from the AC outlet and plug it back in. The unit should return
to normal operation.
If the AC cord plug is plugged in for the first time, wait for approx. 5 seconds before

•
pressing the POWER button.

5L00301C [E]p02-05 20/4/04, 16:125

5

Introduction

Precautions

Notes on handling

When shipping the unit, the original shipping carton
and packing materials come in handy. For maximum
protection, repack the unit as it was originally packed
at the factory.
Do not use volatile liquids, such as insect spray, near
the unit. Do not leave rubber or plastic products in
contact with the unit for a long time. They will leave
marks on the finish.
The top and rear panels of the unit may become
warm after a long period of use. This is not a
malfunction.
When the

unit

is not in use, be sure to remove the disc
and the video cassette turn off the power.
If you do not use the unit for a long period, the unit
may not function properly in the future. Turn on and
use the unit occasionally.

Notes on locating

Place the unit on a level surface. Do not use it on a
shaky or unstable surface such as a wobbling table or
inclined stand. The loaded disc or the video tape may
come off the proper position and cause damage to
the unit.
When you place this unit near a TV, radio, or VCR,
the playback picture may become poor and the sound
may be distorted. In this case, place the unit away
from the TV, radio, or VCR.

Notes on moisture condensation

Moisture condensation damages the unit. Please
read the following carefully.

Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the head drum or the optical
pick-up lens inside this unit, one of the most crucial
internal parts of the unit.

E

Moisture condensation occurs during the
following cases.

When you bring the unit directly from a cold place to a
warm place.
When you use the unit in a room where you just
turned on the heater, or a place where the cold wind
from the air conditioner directly hits the unit.
In summer, when you use the unit in a hot and humid
place just after you move the unit from an air
conditioned room.
When you use the unit in a humid place.

f

o

m

e

o

l

p

i

s

m

a

x

n

o

c

t

u

r

e

s

n

a

e

t

i

d

o

n

!

Tape

Head drum

Notes on cleaning

Use a soft, dry cloth for cleaning.

For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the unit.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.

To obtain a clear picture

The unit is a high technology, precision device. If the
video head, the head drum, the optical pick-up lens and
disc drive parts are dirty or worn down, the picture
quality becomes poor. To obtain a clear picture, we
recommend regular inspection and maintenance
(cleaning or parts replacement) every 1,000 hours of
use depending on the operating environment. For
details, contact your nearest dealer.

6

Do not use the unit when moisture condensation
may occur.

If you use the unit in such a situation, it may damage
discs and internal parts. Remove the disc or the video
tape, connect the power cord of the unit to the wall
outlet, turn on the unit, and leave it for two or three
hours. After two or three hours, the unit will have
warmed up and evaporated any moisture. Keep the
unit connected to the wall outlet and moisture
condensation will seldom occur.

Wait!

Wall outlet

5L00301C [E]p06-12 20/4/04, 16:126

Notes on discs

On handling discs

Do not touch the playback side of the disc.

Playback side

Do not attach paper or tape to discs.

On cleaning discs

Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.

Structure of disc contents

Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. Video CDs and
Audio CDs are divided into tracks.

DVD video disc

DVD video disc

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3

Video CD/Audio CD

Video CD/Audio CD

Track 1 Track 2 Track 3 Track 4 Track 5

Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.

Introduction

If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.

On storing discs

Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.

Notes on copyright

It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, and rent copyrighted
material without permission.

This device does not tape-record copy protected DVD
Video Discs.
The device is not to be used for copying copyrighted
content without the express written permission of the
copyright owner.
Obtaining such permission is the sole responsibility of
the user.

This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.

5L00301C [E]p06-12 20/4/04, 16:127

7

Introduction

Notes on discs (Continued)

About this owner’s manual

This owner’s manual explains the basic instructions of
this unit. Some DVD video discs are produced in a
manner that allows specific or limited operation during
playback. As such, the unit may not respond to all
operating commands. This is not a defect in the unit.
Refer to instruction notes of discs.

” may appear on the TV screen during operation.

“

” means that the operation is not permitted by the

A “
unit or the disc.
For example, sometimes it is unable to stop the
playback of copyright message of the disc when the
STOP (3) button is pressed. Alternatively, the “

” may

also indicate that the feature is not available for the disc.

Notes on region numbers

The region number of this unit is 1. If region numbers,
which stand for their playable area, are printed on your

ALL

1

or

DVD video disc and you do not find

, disc
playback will not be allowed by the player. (In this case,
the unit will display a message on-screen.)

On Video CDs

This DVD supports Video CDs equipped with the PBC
(Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback
variations depending on types of discs.

• Video CD not equipped with PBC function

(Version 1.1)

Sound and movie can be played on this DVD in the
same way as an audio CD.

• Video CD equipped with PBC function

(Version 2.0)

In addition to operation of a Video CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s
manual may not work with some discs.

Playable discs

This unit can play the following discs.

Disc Mark

DVD
video
discs

Video
CDs

Audio
CDs

The following discs are also available.

Some of these discs may be incompatible.

DIGITAL VIDEO

CD-R/CD-RW discs of CD-DA or Video CD format

Contents

Audio
Video

(moving

pictures)

Audio
Video

(moving

pictures)

Audio

Disc
Size

12 cm

+

8 cm

12 cm

+

8 cm

12 cm

8 cm

(CD

single)

• You cannot play discs other than those listed above.

• You cannot play discs of DVD-RAM, DVD-ROM,
Photo CD, etc., or non standardized discs even if they
may be labeled as above.

• Some CD-R/RWs can not be played back depending
on the recording conditions.

• This unit uses the NTSC color system, and cannot
play DVD video discs recorded in any other color
system (PAL, SECAM, etc.).

Maximum

playback time

Approx. 4 hours

(single sided disc)

Approx. 8 hours

(double sided disc)

Approx. 80 minutes

(single sided disc)

Approx. 160 minutes

(double sided disc)

Approx. 74 minutes

Approx. 20 minutes

Approx. 74 minutes

Approx. 20 minutes

8

5L00301C [E]p06-12 20/4/04, 16:128

Contents

Introduction

IMPORTANT SAFEGUARDS........................... 2

Precautions ...................................................... 6

Notes on discs.................................................. 7

Contents........................................................... 9

Identification of controls ................................. 10

Connections

Antenna connections...................................... 13

Cable TV connections .................................... 14

Connecting to optional equipment.................. 15

Basic setup

Starting setup ................................................. 18

Clock setting................................................... 19

Setting the language ...................................... 22

TV/VCR operation status ............................... 22

TV operation

TV operation................................................... 23

Closed captions.............................................. 25

To memorize channels ................................... 26

Setting the V-Chip .......................................... 27

To set the on timer.......................................... 29

To set the off timer.......................................... 30

Picture control adjustment.............................. 31

Adjusting the picture preference .................... 31

Sound control adjustment .............................. 32

Stereo and Second Audio Program (SAP)..... 32

Playback (VCR)

Loading and unloading a cassette tape ......... 33

Cassette tape playback.................................. 34

Special playback ............................................ 35

Convenient function ....................................... 36

Basic playback (DVD)

Playing a disc ................................................. 44

Introduction

Advanced playback (DVD)

Zooming ......................................................... 47

Locating desired scene .................................. 47

Repeat playback............................................. 48

A-B Repeat playback...................................... 48

Program playback .......................................... 49

Random playback........................................... 49

Changing angles ............................................ 50

Title selection ................................................. 50

DVD menu...................................................... 50

Changing soundtrack language ..................... 51

Subtitles ......................................................... 51

Karaoke playback........................................... 52

Disc status...................................................... 52

To turn off the PBC ........................................ 52

Function setup (DVD)

Customizing the function settings .................. 53

Temporary disabling of rating level

by DVD disc ................................................... 56

Others

Language code list ......................................... 57

Troubleshooting ............................................. 58

Reception disturbances.................................. 60

Specifications ................................................. 61

Limited warranty............................................. 62

Recording (VCR)

Recording a TV program................................ 38

One-touch Timer Recording (OTR) ................ 39

Timer recording .............................................. 40

Other functions (VCR)

Duplicating a video tape................................. 42

Recording a DVD/CD disc.............................. 43

5L00301C [E]p06-12 20/4/04, 16:129

9

Introduction

Identification of controls

See the page in for details.

Front panel

Illustration of MW20FP3

Cassette loading slot

PHONES jack

24

AUDIO (L/R)/VIDEO IN (LINE IN 2) jacks

REW (Rewind) button

STOP/EJECT button

PLAY button

FF (Fast Forward) button

REC/OTR button

CHANNEL ▲/▼ buttons

Rear panel

33

Remote sensor

TIMER REC indicator

12

40

Disc tray

44

POWER button

42

34
33

34
34

38

24

POWER
indicator

19

REC/OTR

indicator

LINE 1 IN

OUT PUT

VHF/UHF

VIDEO

VIDEO

DIGITAL AUDIO

L

L

COAXIAL

AUDIO

AUDIO

R

38

(MONO)

R

SKIP button
PLAY button
STOP button
SKIP button
VOLUME ▲/▼ buttons
OPEN/CLOSE button

46

44

44

46

23

44

RF IN (VHF/UHF) jack

AC power cord

10

5L00301C [E]p06-12 20/4/04, 16:1210

VHF/UHF

14

DIGITAL AUDIO

5

COAXIAL DIGITAL AUDIO OUT jack

LINE 1 IN

OUT PU T

COAXIAL

VIDEO

L

AUDIO

R

16

VIDEO

L

(MONO)

AUDIO

R

AUDIO (L/R)/VIDEO IN (LINE 1 IN) jacks

AUDIO (L/R)/VIDEO OUT jacks

42

15

Remote control

The instructions in this manual describe the functions on the remote control. See the page in for details.

Introduction

DVD button
TV/VCR button

44

19

Direct channel
selection buttons (0

-

9)

Number buttons (0-9)

DISPLAY button
SLEEP button

22

24

AUDIO SELECT button
REC buttons

36

TIMER REC buttons

button

button

button

button

button

34
34

47

50

38

19

53

44

46

35

button

53

18

PLAY button
REV button

CM SKIP button
JUMP button

COUNTER RESET
ANGLE

SP/SLP
RETURN

MENU
SETUP

Direction buttons

( / / / )

CANCEL/CLEAR

button

40

23
27

32

36

18

DVDTV/VCR

7 9

8

DISPLAY

0

AUDIO

SLEEP

SELECT

TIMER

REC

CM SKIP/JUMP

COUNTER

RESET

RETURN

ANGLE

MENU

SETUP

ENTER

CANCEL

CLEAR

321

654

CHANNEL

RETURN

SKIP

REC

PLAY

STOP

ZERO

RETURN

SUBTITLE

PROGRAM

REPEAT A-B TOP MENU

POWER

CHANNEL

VOLUMEMUTE

CLOSED

CAPTION

SKIP

SLOW

FWDREV

PAUSE/STILL

INPUT

SELECTSP/SLP

ZOOM

D.TRACKING

+

TRK

DVD MENU

-

TRK

PLAY MODE

POWER button

18

CHANNEL / buttons

MUTE button

24

VOLUME / buttons

CLOSED CAPTION button
SKIP button

SLOW button

35

46

46

CHANNEL RETURN button
SKIP button

STOP button
FWD button

PAUSE/STILL button

34

34

46

44

46

35

ZERO RETURN button
SUBTITLE button

PROGRAM button
REPEAT A-B button

51

29

48

INPUT SELECT button
ZOOM button
D.TRACKING button
TOP MENU button
TRK + button

*DVD MENU button

TRK - button
PLAY MODE button
ENTER button

47

35

50

35

50

35

48

18

24

23

25

24

37

42

* DVD MENU button

Use the MENU button to display
the menu included on many
DVD video discs. To operate a
menu, follow the instructions in
“DVD menu”.

5L00301C [E]p06-12 20/4/04, 16:1211

50

11

Introduction

Identification of controls (continued)

Inserting batteries

Slide the battery compartment
cover in the direction of the

1

arrow.

Battery precautions:

The precautions below should be followed when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
versed batteries may cause damage to the device. T o avoid a potential short circuit, insert the “–” end first.

3.

Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)

Install two “R03/AAA” batteries
(supplied),

2 3

the polarity diagram in the
battery compartment.

paying attention to

Replace the compartment cover.

Re-

Remote control basics

• Press POWER to turn the unit on or off.

• Select your desired operating mode (TV/VCR or DVD) using TV/VCR or DVD.

• Tap CHANNEL

• The Direction buttons ( / / / ) are also used to navigate on-screen menu system.

• You can directly access specific channels using Direct channel selection buttons.

Operation:

• Aim the remote control at the remote sensor and press control buttons to
operate.

• Operate the remote control within 30° angle on either side of the remote
sensor, up to a distance of approx. 5 meters.

or to move through the channels one channel at a time.

12

5L00301C [E]p06-12 20/4/04, 16:1212

Illustration of MW20FP3

Approx. 5 meters

Connections

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system.
If you are using a cable TV service (CABLE), see page 14 for Cable TV connections.

Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Antenna

jack

Antenna

jack

Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, the use of the 300-75 ohm

75 ohm coaxial cable
(not supplied)

300-75 ohm matching
transformer (supplied)

matching transformer may be necessary.

Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Antenna

jack

Combiner
(not supplied)

300-75 ohm matching
transformer (supplied)

Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300
ohm twin-lead wire to the 300-75 ohm matching
transformer. Attach the transformer to the combiner,
then attach the combiner to the antenna jack.

Connections

UHF 300 ohm
twin-lead wire
(not supplied)

VHF 300 ohm
twin-lead wire
(not supplied)

Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Antenna

jack

VHF 75 ohm
(not supplied)

Combiner
(not supplied)

UHF 300 ohm
twin-lead wire
(not supplied)

5L00301C [E]p13-17 20/4/04, 16:1213

Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner (not supplied).
Attach the combiner to the antenna jack.

13

Connections

Cable TV connections

This unit has an extended tuning range and can tune most cable channels without using a Cable TV converter box.
Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for
normal viewing requires the use of a descrambler device which is generally provided by the cable company.

For subscribers to basic cable TV service

For basic cable service not requiring a converter/descrambler
box, connect the Cable TV 75 ohm coaxial cable directly to the
Antenna jack on the back of the unit.

75 ohm
coaxial cable

Antenna

jack

For subscribers to scrambled cable TV service

If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the
incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect
the output jack of the converter/descrambler box to the antenna jack on the unit. Follow the connections shown
below. Set the unit to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the
converter/descrambler box to select channels.

Incoming
75 ohm
Cable TV

Converter/

descrambler

75 ohm cable to
the unit

Antenna

jack

For subscribers to unscrambled basic cable TV service with scrambled
premium channels

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the
cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B”
position, you can directly tune any nonscrambled channels on your unit. With the switch in the “A” position, tune your
unit to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box
to tune scrambled channels.

Incoming
75 ohm
Cable TV

Splitter

Converter/

descrambler

A/B switch

75 ohm cable to

A

the unit

B

Antenna

jack

14

5L00301C [E]p13-17 20/4/04, 16:1214

Connecting to optional equipment

Before connecting the unit to other equipment, be sure to turn off the power and
unplug all of the equipment from the wall outlet before making any connections.
Y ou can enjoy the TV game, camcorder or high quality dynamic sounds of DVD
video discs or audio CDs by connecting the unit to optional audio equipment.

Using the audio/video inputs

INPUT SELECT

Press INPUT SELECT repeatedly to select the desired mode.
“LINE1”, “LINE2” or TV channel will display on the screen for 4 seconds.

TV Channel LINE1

(Back)

Note: In the DVD mode this key will not operate.

LINE2

(Front)

LINE 1

Connecting a camcorder or a TV game

To playback from the camcorder or playing a TV Game, connect the camcorder to the unit as shown.

Signal flow

Illustration of MW20FP3

To AUDIO (L/R)/VIDEO OUT

Audio/Video cable (not supplied)

(yellow)

(white)

(red)

To AUDIO (L/R)/VIDEO IN

(LINE IN 2)

(yellow)

(white)

(red)

Connections

Camcorder

OR

TV GAME

Connecting to an audio system

Connect the unit to your audio system.

LINE 1 IN

OUT PUT

VHF/UHF

VIDEO

VIDEO

DIGITAL AUDIO

(MONO)

L

L

COAXIAL

AUDIO

AUDIO

R

R

5L00301C [E]p13-17 20/4/04, 16:1215

To ANALOG AUDIO OUT

(white)

Audio cable (not supplied)

(red)

(white)

Audio system

(red)

To audio inputs of the amplifier

15

Connections

Connecting to optional equipment (Continued)

You can enjoy high quality dynamic sounds by connecting
the unit to optional audio equipment.

Connecting to an amplifier equipped with a Dolby Digital decoder

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to
reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic
realistic sound by connecting the unit to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital
processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD
movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.

Amplifier equipped with a

Dolby Digital decoder

To COAXIAL
type digital
audio input

75 Ω coaxial cable (not supplied)

• This section uses the following reference mark.

: Front speaker
: Rear speaker

: Center speaker
: Signal flow

: Sub woofer

LINE 1 IN

OUT PUT

VHF/UHF

VIDEO

VIDEO

DIGITAL AUDIO

(MONO)

L

L

COAXIAL

AUDIO

AUDIO

R

R

To COAXIAL DIGIT AL

AUDIO OUT

Manufactured under license
from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the
double-D symbol are trade­marks of Dolby Laboratories.

Connecting to an amplifier equipped with Dolby Surround Pro Logic

Dolby Surround Pro Logic

You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right
and left front speakers, a center speaker, and one or two rear speakers).

3 With an amplifier equipped with Dolby Digital

Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.”
Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.

3 With an amplifier not equipped with Dolby Digital

Connect the equipment as follows.

• This connection is only suitable for Video CDs and Audio CDs.

LINE 1 IN

OUT PUT

Amplifier equipped with

Dolby Surround Pro Logic

VHF/UHF

VIDEO

VIDEO

DIGITAL AUDIO

(MONO)

L

L

COAXIAL

AUDIO

AUDIO

R

R

To audio input

To ANALOG

AUDIO OUT

Audio cable (not supplied)

Connect one or two rear speak­ers. The output sound from the
rear speakers will be monaural
even if you connect two rear
speakers.

Connecting to an amplifier equipped with a DTS decoder

Digital Theater Systems (DTS)

DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD
video discs or audio CDs.

LINE 1 IN

OUT PUT

Amplifier equipped with

a DTS decoder

To COAXIAL
type digital
audio input

To COAXIAL DIGIT AL

AUDIO OUT

75 Ω coaxial cable (not supplied)

VHF/UHF

VIDEO

VIDEO

DIGITAL AUDIO

(MONO)

L

L

COAXIAL

AUDIO

AUDIO

R

R

“DTS” and “DTS Digital Out”
are trademarks of Digital
Theater Systems, Inc.

16

5L00301C [E]p13-17 20/4/04, 16:1216

Connecting to an amplifier equipped with a MPEG audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier
equipped with an MPEG2 audio decoder or MPEG2 audio processor.

LINE 1 IN

Amplifier equipped with an

MPEG2 audio decoder

OUT PUT

VHF/UHF

VIDEO

VIDEO

DIGITAL AUDIO

(MONO)

L

L

COAXIAL

AUDIO

AUDIO

R

R

To COAXIAL
type digital
audio input

To COAXIAL DIGIT AL

AUDIO OUT

75 Ω coaxial cable (not supplied)

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).

Amplifier equipped with a

Digital audio input

To COAXIAL
type digital
audio input

To COAXIAL DIGIT AL

AUDIO OUT

75 Ω coaxial cable (not supplied)

Notes:

• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO
OUT jack of the unit.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the “COAXIAL” input of a Receiver or Processor.

• Refer to the owner’s manual of the connected equipment as well.

• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.

• The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver ’s volume to a moderate listening
level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the unit’s power cord. If you leave the amplifier power on, the
speakers may be damaged.

LINE 1 IN

OUT PUT

VHF/UHF

VIDEO

VIDEO

DIGITAL AUDIO

(MONO)

L

L

COAXIAL

AUDIO

AUDIO

R

R

Connections

5L00301C [E]p13-17 20/4/04, 16:1217

17

Basic setup

Starting setup

The STARTING SETUP function makes installing your unit easily. It leads you
the Language selection, TV/CABLE selection and auto channel memory
automatically.

IMPORTANT: Make sure that the antenna or cable TV system connection
is made!

Starting setup

Press POWER.
The starting setup function begins and the

1

Language setup menu appears on the screen.
Press
then press ENTER.

POWER

or to select your desired language,

LANGUAGE/IDIOMA/LANGUE

ENGLISH

ESPAÑOL

ENTER

FRANCAIS

ENTER

/ /

Now the “AUTO CH MEMORY” and “AUTO
CLOCK”starts.

4

After the starting setup is completed, the TV
channel appears on the screen.

POWER

/

ENTER

AUTO CH MEMORY

STOP : CANCEL

Press or to select “TV” or “CABLE”, then
press ENTER.

2

CHANNEL PLAN

TV

ENTER

Press
ENTER.

3

If you select “CANCEL” and press ENTER, the
STARTING SETUP stops and changes to the TV
screen.

ENTER

or

to select “START”, then press

CABLE

ENTER

/ /

AUTO SETUP

START

CANCEL

ENTER

/ /

AUTO CLOCK

STOP : CANCEL

Notes:

• The starting setup function will work only when you press the
POWER button for the first time.

• In “AUTO CLOCK” setting, it may take more than 10 minutes
to read the EDS signal for one channel, which has only “Time
of day” or “Local time zone”.

18

5L00301C [E]p18-21 20/4/04, 16:1218

Clock setting

/ / / /

MENU

CLOCK SET
ON/OFF TIMER

AUTO CLOCK

STAND ARD TIME
DAYLIGHT

SAVING TIME

ON

CLOCK SET
ON/OFF TIMER
AUTO CLOCK
STAND ARD TIME
DAYLIGHT

SAVING TIME

/ / / /

MENU

ON

/ / / /

MENU

CLOCK SET
ON/OFF TIMER

AUTO CLOCK

STAND ARD TIME
DAYLIGHT

SAVING TIME

OFF

The auto clock function will automatically set the built-in clock (Month, Day,
Year and Time) when the unit is connected to an antenna or cable system
and it is turned off. As the unit searches for a receivable station in your area
and it receives a broadcast signal for auto clock, the auto clock needs
several minutes to set itself.

TV/VCR
POWER

DISPLAY

MENU

/ / /

Auto clock setting

Preparation:

• Connect the antenna or cable system.

• If you use a cable box, turn it on.

• Plug the AC power cord to the AC outlet.

Make sure the unit is turned off.

1

Wait at least three minutes and press POWER.
Then press TV/VCR to select TV/VCR mode.

2

POWER

TV/VCR

Press DISPLA Y to check the clock on the
screen.

3

DISPLAY

• If you press POWER, the Auto Clock
set is not effective.

The POWER indicator will light.

POWER

TV/VCR

8 : 47

AM

STEREO SAP

MON

CH 125

00 : 00 : 00 SP

To set auto clock to OFF

When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want auto clock set (Adjustment):

Press MENU, then press or to select
option.

1

MENU

SETUP

ENTER

Press or to select “AUTO CLOCK”.

2

ENTER

Press

or

to select “OFF”.

3

Basic setup

If the clock is not set, check the antenna
condition. The Auto clock may not function

4

properly if the reception condition is not
good.

Auto clock adjustment

The Auto clock adjustment will be performed at
12:00 PM everyday if you turn off the unit.

• If you use a cable box and you want Auto Clock adjust
ment to be performed, the cable box must be left on.

• The Auto Clock adjustment is not effective when there is a
difference of more than 5 minutes exists between the
built-in clock time and the actual time.

5L00301C [E]p18-21 20/4/04, 16:1219

ENTER

Press MENU repeatedly until the menu
screen is cleared.

4

• When the AUTO CLOCK is set to

MENU

SETUP

Notes:

• If the unit does not operate properly, or No key operation
(by the unit and/or the remote control): Static electricity,

etc., may affect the player's operation. Disconnect the AC power
cord once, then connect it again.

• The TV section has its own menu and also DVD section has
its own menu 53.

•

If no buttons are pressed for more than 60 seconds, the TV/VCR
menu screen will return to normal TV operation automatically.

“OFF”, the Auto Clock adjustment
does not function.

• Set the clock manually

21

.

19

Basic setup

SETUP

MENU

SETUP

MENU

Clock setting (continued)

To set standard time

In the rare event that you live within broadcast range of two
stations in two different time zones, the unit may recognize
the wrong station for the auto clock set.
To correct the situation:

Press MENU, then press or to select

1

2

3

4

Note:

To be able to select the standard time, the clock must first be
set by “AUTO CLOCK” once.

option.

CLOCK SET

MENU

SETUP

Press
press

ENTER

or

.

ON/OFF TIMER

ENTER

AUTO CLOCK
STAND ARD TIME
DAYLIGHT

SAVING TIME

MENU

/ / / /

to select “STANDARD TIME”

CLOCK SET
ON/OFF TIMER
AUTO CLOCK

STANDARD TIME

DAYLIGHT

SAVING TIME

MENU

/ / /

ON

, then

ON

Press / / / to select your time zone, then
press ENTER.

ATLANTIC : GMT–4hours
EASTERN : GMT–5hours
CENTRAL : GMT–6hours
MOUNTAIN : GMT–7hours
PACIFIC : GMT–8hours

ENTER

ALASKA : GMT–9hours
HAWAII : GMT–10hours
AUTO : AUTO SET
(GMT: Greenwich Mean Time)

Press MENU repeatedly until the menu
screen is cleared.

MENU

SETUP

To set daylight saving time

You can set the Daylight saving time automatically or
manually.

Press MENU, then press or to select

1

2

3

ON:
OFF:
AUTO:

When you want to set the Daylight Saving Time manually,
on the first Sunday in April you set to “ON”, and on the last
Sunday in October you set to “OFF”.

4

option.

CLOCK SET

ENTER

ON/OFF TIMER
AUTO CLOCK
STAND ARD TIME
DAYLIGHT

SAVING TIME

MENU

/ / / /

ON

Press or to select “DAYLIGHT SAVING
TIME”, then press

ENTER

.

CLOCK SET
ON/OFF TIMER
AUTO CLOCK
STANDARD TIME

DAYLIGHT

SAVING TIME

MENU

/ / /

ON

Press or to select one of the options, then
press ENTER.

DAYLIGHT SAVING TIME

ON

ENTER/MENU

/ /

OFF

AUTO

ENTER

for manual setting (forward one hour)
for manual setting (back one hour)
for automatic setting (read EDS in the signal)

Press MENU repeatedly until the menu screen
is cleared.

Notes:

• When shipped from factory, the DAYLIGHT SAVING TIME is

set to “AUTO” position.

• When the clock is not set, Daylight Saving Time setting is not
available.

• When there is no Daylight Saving Time in your area, always
select “OFF” position in step 3.

20

5L00301C [E]p18-21 20/4/04, 16:1220