Toshiba MD13N3 User Manual
COMBINATION COLOR TELEVISION AND
DVD/CD PLAYER
Owner’s Manual
MD13N3
DIGITAL VIDEO
ATTENTION
For your protection in the event of theft or loss of this product, please fill in the
information listed below which is for your own personal records.
Date of Purchase :
Serial No. :
Place of Purchase :
TV/CATV MODE SELECTION
When shipped from the factory, the TV/CATV menu option is set to the
“CATV”(Cable Television) mode.
If not using CATV, set this menu option to the “TV” position.
Before operating the unit, please read this manual thoroughly.
The lightning flash with arrowhead
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
symbol, within an equilateral triangle is
intended to alert the user to the
presence of uninsulated dangerous
voltage within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
CAUTION: TO REDUCE THE RISK OF ELEC-
TRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with
the FCC (Federal Communications Commission) Rules could void the user's authority to operate
this equipment.
COPYRIGHT: It is permissible to record television programs, films, video tapes and other material only in the
event that third party copyrights and other rights are not violated.
CAUTION:
THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE
READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN
FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE
MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT
TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED.
DO NOT STARE INTO BEAM.
Location of the required Marking
The rating sheet and the safety caution
are on the rear of the unit.
CERTIFICATION: COMPLIES WITH
FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.
2
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning the exterior cabinet only.
6. ATTACHMENTS
The manufacturer of this unit does not make any recommendations for attachments, as they may cause
hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
8. ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury, and serious damage to the unit.
8A. An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
9. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation,
and to ensure reliable operation of the unit, and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to.
10. POWER SOURCE
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other sources, refer to the respective pages on this Owner's Manual for their operating instructions.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Instead of the polarized alternating-current line plug, your unit may be
equipped with a 3-wire grounding-type plug (a plug having a third (grounding) pin). This plug will only fit into
a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.
PORTABLE CART WARNING
(symbol provided by RETAC)
S3126A
3
IMPORTANT SAFEGUARDS (Continued)
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
13. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
unit due to lightning and power line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,
as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the
National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
For example:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance, this indicates a need for service.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
21. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
22. DISC TRAY
Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.
23. CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's
manual of the other equipment carefully and follow the instructions when making any connections.
24. SOUND VOLUME
Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume
sound may cause hearing or speaker damage.
4
25. SOUND DISTORTION
Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire.
26. HEADPHONES
When you use the headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage.
27. LASER BEAM
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the
laser beam. It may cause sight damage.
28. DISC
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.
29. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
ANTENNA LEAD
IN WIRE
GROUND
CLAMP
ELECTRIC SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
S2898A
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
5
Notes on discs
On handling discs
Do not touch the playback side of the disc.
Playback side
Do not attach paper or tape to discs.
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.
Structure of disc contents
Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. VIDEO CDs and
AUDIO CDs are divided into tracks.
DVD video disc
DVD video disc
Title 1 Title 2
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3
VIDEO CD/AUDIO CD
VIDEO CD/AUDIO CD
Track 1 Track 2 Track 3 Track 4 Track 5
Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.
Notes on copyright
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, and rent copyrighted
material without permission.
This device does not tape-record copy protected DVD
Video Discs.
The device is not to be used for copying copyrighted
content without the express written permission of the
copyright owner.
Obtaining such permission is the sole responsibility of
the user.
This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
6
Before using your unit
IMPORTANT SAFEGUARDS .............................................. 3
Notes on discs...................................................................... 6
Contents ............................................................................... 7
Parts and functions .............................................................. 8
Remote control ..................................................................... 9
Power source ..................................................................... 10
Antenna connections.......................................................... 11
Cable TV connections ........................................................ 12
TV operation
Setting the language .......................................................... 13
TV operation....................................................................... 14
Closed caption ................................................................... 16
To memorize channels ....................................................... 17
Setting the V-Chip .............................................................. 19
Picture control adjustment.................................................. 22
Stereo and separate audio program (SAP) ........................ 23
Playback operation
Disc .................................................................................... 24
Preparation/Status display of disc ...................................... 25
Playback procedure ........................................................... 26
Special playback ................................................................ 27
Contents
Advanced Function
Zooming/Locating desired scene ....................................... 28
Repeat/Random/Program playback and Repeat A-B......... 29
Changing soundtrack language/Subtitles .......................... 30
Changing angles/Title selection/DVD menu....................... 31
Additional Information
Setting language ................................................................ 32
Setting the aspect ratio of TV screen/Setting on screen
display ................................................................................ 33
Dynamic Range Control ..................................................... 34
Parental control setting ..................................................... 35
To change the parental level .............................................. 36
Temporary disabling of rating level by DVD disc ................ 37
Language code list ............................................................. 38
Reception disturbances...................................................... 39
Connections to other equipments ...................................... 40
Problems and troubleshooting .............................................
Specifications ..................................................................... 44
Warranty............................................................................. 45
42
7
Parts and functions
Front
VOLUME UP/DOWN buttons
OPEN/CLOSE button
AUDIO (L/R)/VIDEO IN jacks (LINE)
SKIP buttons
Disc tray
Rear
Power indicator
POWER button
Remote sensor
CHANNEL UP/DOWN buttons
Headphone jack
STOP button
PLAY button
8
COAXIAL DIGITAL AUDIO OUT jack
RF IN jack
AC power cord
TV/DVDRECALL
POWER
INPUT SELECT
321
GAME
654
OPEN/CLOSE
79
8
CLOSED
SLEEP
CAPTION
MUTE
0
ANGLE
TOP MENU
SETUP/MENU DVD MENU
VOL – VOL +
RETURN
REV
SKIP STOP SKIP JUMP
SLOW PAUSE SLOW REPEAT A–B
AUDIO
SUBTITLE
ZOOM/CH RTNCANCEL
CH +
CH –
PLAY FWD PLAY MODE
ENTER
Remote control
Page
RECALL Call TV information 15
TV/DVD Switch between TV/AV and DVD 25
POWER Power On/Off 13,14,25
0-9 Direct channel selection of TV 14,18
INPUT SELECT Switch between TV/AV 41
GAME Switch between TV/AV and GAME 41
OPEN/CLOSE Open or Close the tray 26,37
SLEEP Sleep timer 15
CLOSED CAPTION Switch between TV/Caption/Text in 16
MUTE Switch off the sound 15
TOP MENU Select title 31
SUBTITLE Set Subtitle 30
AUDIO Switch the sound of TV 23
ANGLE Change playback angle 31
SETUP/MENU TV mode - Display menu of TV 13,17~22
DVD MENU Display DVD menu 31
CANCEL Reset information in the menu 19,22,28,35
ZOOM/CH RTN Switch between present/last channel 15
CH+/– Select channel of TV 15
VOL +/– Adjust volume of TV 14
RETURN Remove DVD set up menu 32~37
ENTER Enter information in the menu 13,19,21,26
FWD/REV Fast Forward/Review playback 27
PLAY Playback 26,27,29,31,37
PLAY MODE Select playback mode 29
SKIP Skip chapter to forward or reverse 27
STOP Stop 26
JUMP Locating desired scene 28
SLOW Forward/Reverse- slow motion 27
PAUSE Pause CD sound 27
REPEAT A-B Repeat playback between A and B 29
Call DVD information 25
Input setting 28,29
Enter a password 19,21,35~37
Closed Caption mode
Change sound track language 30
DVD mode - Call up initial setup mode32~36
Zoom 28
Cursor buttons 13,17~22
26,28,31~36
Cursor buttons 13,17~22
26,28,31
28,29,31~37
direction
Still picture of DVD
9
Remote control
Inserting Batteries
Slide the battery compartment
123
cover in the direction of the
arrow.
Operation
• Aim the remote control at the remote sensor and
press control buttons to operate.
• Operate the remote control within 30° angle on
either side of the remote sensor, up to a distance of Approx. 5 meters.
The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh
ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery
manufacturer’s directions).
Install two "AAA" batteries
(supplied), paying attention to
the polarity diagram in the
battery compartment.
Replace the compartment
cover.
Approx. 5 meters
Power source
Wider Hole
and Blade
Polarized AC Cord Plug
(One blade is wider than the other.)
10
AC Outlet
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert
the AC cord plug into a standard 120V 60Hz polarized AC outlet.
NOTES:
Never connect the AC line cord plug to other than the specified
•
voltage (120V 60Hz). Use the attached power cord only.
If the polarized AC cord does not fit into a non-polarized AC
•
outlet, do not attempt to file or cut the blade. It is the user’s
responsibility to have an electrician replace the obsolete outlet.
If you cause a static discharge when touching the unit and the
•
unit fails to function, simply unplug the unit from the AC outlet
and plug it back in. The unit should return to normal operation.
If the AC cord plug is plugged in for the first time, wait for about
•
5 seconds before pressing the POWER button.
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna
system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)
Connect the 75 ohm Cable from the Combination
VHF/UHF Antenna to the Antenna Jack.
75 ohm
Coaxial
Cable
Antenna
Jack
300-75 ohm
Matching
Transformer
Antenna
Jack
If your Combination VHF/UHF Antenna has a 300
ohm Twin-lead Wire, the use of the 300-75 ohm
Matching Transformer may be necessary.
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)
Connect the UHF 300 ohm Twin-lead Wire to the
Antenna
Jack
Combiner
UHF 300 ohm
300-75 ohm
Matching
Transformer
Combiner (not supplied). Connect the VHF 300
ohm Twin-lead Wire to the 300-75 ohm Matching
Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the Antenna
Jack.
VHF 300 ohm
Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)
Antenna
Jack
Combiner
VHF 75 ohm
UHF 300 ohm
Connect the VHF 75 ohm cable and UHF 300 ohm
Twin-lead Wire to the Combiner. Attach the Combiner to the Antenna Jack.
11
Cable TV connections
This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable
TV Converter box. Some cable companies offer “premium pay channels” in which the signal is
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device
which is generally provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
Antenna
Jack
75 ohm
Coaxial Cable
For basic cable service not requiring a Converter/Descrambler
box, connect the CATV 75 ohm Coaxial Cable directly to the
Antenna Jack on the back of the TV/DVD.
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE
If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the
incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable,
connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV/DVD. Follow the
connections shown below. Set the TV/DVD to the output channel of the Converter/Descrambler box (usually
channel 3 or 4) and use the Converter/Descrambler box to select channels.
Incoming
75 ohm
CATV Cable
Converter/
Descrambler
75 ohm Cable to
TV/DVD
Antenna
Jack
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from
the Cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B”
position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune
your TV/DVD to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/
Descrambler box to tune scrambled channels.
Incoming
75 ohm
CATV Cable
Splitter
Converter/
Descrambler
A/B Switch
75 ohm Cable
A
to TV/DVD
B
Antenna
Jack
12
Setting the language
You can choose from three different languages (English, French and Spanish) for the on-screen displays.
Adjustment menus and messages will appear in the language of your choice.
On-screen language selection (step 5) will automatically appear on the screen when you press the MENU
button initially. Select the language you prefer first, then proceed with the other menu options.
To turn on the TV/DVD, press POWER. The Power indicator
1
will light.
TV/DVDRECALL
POWER
INPUT SELECT
321
GAME
654
OPEN/CLOSE
79
8
SLEEP
CLOSED
CAPTION
0
ANGLE
TOP MENU
SETUP/MENU DVD MENU
VOL – VOL +
RETURN
REV
SKIP STOP SKIP
SLOW PAUSE SLOW REPEAT A–B
AUDIO
SUBTITLE
ZOOM/CH RTNCANCEL
CH +
CH –
PLAY FWD PLAY MODE
ENTER
MUTE
JUMP
Press MENU in the TV mode.
2
The TV menu screen will appear.
Press or until the OPTION
3
menu appears.
4
Press
or to select the
“LANGUAGE” option, then press
or button.
Press or to select the
5
desired language: English
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press
ENTER.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
/ / / /MENU
<
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
/ / / /MENU
<
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
/ / ENTER / MENU
<
>
<
<
NOTE:
If the unit does not operate properly,
•
or No key operation (by the unit and/
or the remote control): Static electricity,
etc., may affect the player's operation.
Disconnect the AC power cord once, then
connect it again.
The TV section has its own menu and also
•
DVD section has its own menu (see page
32).
Press MENU until the MENU
6
screen is cleared.
13
TV operation
VOLUME 32
CH 012
TV/DVDRECALL
79
8
SLEEP
0
TOP MENU
SUBTITLE
DVD MENU
SETUP/MENU
VOL – VOL +
RETURN
PLAY FWD PLAY MODE
REV
SKIP STOP SKIP
SLOW PAUSE SLOW REPEAT A–B
CH +
CH –
321
654
CLOSED
CAPTION
AUDIO
POWER
INPUT SELECT
GAME
OPEN/CLOSE
MUTE
ANGLE
ZOOM/CH RTNCANCEL
ENTER
JUMP
To turn on the TV/DVD, press
1
POWER.
Adjust the volume level by
2
pressing VOL + or –. The volume
level will be indicated on the
screen by green bars. As the
volume level increases, so do
the number of bars. If the volume
decreases, the number of green
bars also decreases.
Set the TV/CATV menu
3
option to the appropriate
TV - VHF/UHF channels
CATV - CABLE TV channels
position. (See page 17.)
Press the Direct Channel selection
4
buttons to select the channel.
TV Mode Direct Channel Selection
When the TV/CATV menu option is
in the TV position, all channels can
be instantly selected by using two
buttons. (for example, to select
channel 2, press “0”, then “2”. If
you press only “2”, channel
selection will be delayed for a few
seconds.) For channels 10 and
above, press the 2 digits in order.
CATV Mode Direct Channel Selection
When the TV/CATV menu option is in the CATV position, channels
can be selected as follows:
TO SELECT CATV CHANNELS:
1-9: Press “0” twice, then 1-9 as needed. Example, to select
channel 2, press "002".
10-12: Press “0”, then the remaining 2 digits. Example, to
select channel 12, press "012".
13-99: Press the 2 digits in order. Example, to select channel
36, press "36".
100-125: Press the 3 digits in order. Example, to select channel
120, press "120".
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel
will be selected in 2 seconds.
NOTES:
If a channel with no broadcast is
•
selected, the sound will automatically be muted.
If a station being viewed stops
•
broadcasting, the TV will automatically shut itself off after 15 minutes.
14
TV
VHF
2-13
UHF
14-69
CATV
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
TV/DVDRECALL
MUTE
POWER
INPUT SELECT
321
GAME
654
OPEN/CLOSE
79
8
CLOSED
SLEEP
CAPTION
MUTE
0
ANGLE
SUBTITLE
DVD MENU
AUDIO
ZOOM/CH RTNCANCEL
TOP MENU
SETUP/MENU
CHANNEL UP/DOWN
Press and release CH + or –. The
channel automatically stops at the
next channel set into memory.
For proper operation, before selecting channels, they should be set into
the memory. See pages 17 and 18
“To memorize channels”
RECALL
Press RECALL to display the
current informations on the screen.
Press RECALL again to clear the
call display.
• Channel number or VIDEO mode
• Stereo or SAP (second audio
program) audio status
• Audio output status
STEREO SAP CH 012
SEL. MONO+SAP
CH +
VOL – VOL +
RETURN
REV
SKIP STOP SKIP
SLOW PAUSE SLOW REPEAT A–B
CH –
PLAY FWD PLAY MODE
ENTER
JUMP
CH RETURN
This button allows you to go back to
the last channel selected by pressing
CH RTN. Press CH RTN again to
return to the last channel you were
watching.
MUTE
Press MUTE to switch off the sound.
The TV/DVD’s sound will be silenced
and “MUTE” will briefly appear on the
screen. The sound can be switched
back on by pressing this button
again or one of the VOLUME + or –
buttons.
SLEEP
To set the TV/DVD to turn off after a
preset amount of time, press SLEEP
on the remote control. The clock will
count down 10 minutes for each press
of SLEEP (120, 110, ...10, 0). After the
sleep time is programmed, the display
will appear briefly every ten minutes
to remind you that the sleep timer is
operating. To confirm the sleep timer
setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press
SLEEP repeatedly until the display
turns to 0.
SLEEP
120
15
Loading...