Toshiba IK-DF01A User Manual
INSTRUCTION MANUAL
CCD COLOR CAMERA
IK-DF01A
Please read this manual thoroughly before use, and k eep it handy
for future reference.
Record in space provided below the Model No. and
the Serial No. as found on the label on the bottom
of this unit.
Model. No. IK-DF01A Serial No.
Retain this information for future reference.
TABLE OF CONTENTS
Important safeguards
1. Features & Description ................................................. 3
2. Cautions........................................................................ 3
3. Components ................................................................. 3
4. Part Names & Functions............................................... 4
5. Connections and Operations ........................................ 5
6. Installations................................................................... 7
7. Line Lock Phase ........................................................... 9
8. Note on use and Installation ......................................... 9
9. In Case of Problems ..................................................... 10
10. Specifications................................................................ 11
11. Exterior View................................................................. 12
IMPORTANT SAFEGUARDS
1. Read Instructions
All the safety and operating instructions should
be read before the product is operated.
2. Retain Instructions
The safety instructions and instruction manual
should be retained for future reference.
3. Heed Warnings
All warnings on the product and in the instruction
manual should be adhered to.
4. Follow Instructions
All operating and use instructions should be
followed.
5. Cleaning
Disconnect this video product from the power
supply before cleaning.
6. Attachments
Do not use attachments not recommended by the
video product manufacturer as they may cause
hazards.
7. Water and Moisture
Do not use this video product near water-for
example, near a bath tub, w ash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a
swimming pool and the like.
8. Accessories
Do not place this video product on an unstable
cart, stand, tripod, bracket or table. The video
product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use
only with stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the video product. Any mounting of the product
should follow the manufacturer’ s instructions, and
should use a mounting accessory recommended
by the manufacturer.
9. Ventilation
This video product should never be placed near
or over a radiator or heat register. This video
product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’ s
instructions have been adhered to.
10.Power Sources
This video product should be operated only from
the type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your location, consult your product
dealer.
11.Power-Cord Pr otection
Power-Supply cords should be routed so that the y
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, screws and the point
where they exit from the product.
12.Lightning
For added protection for this video product during
a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from
the wall outlet and disconnect the power supply
and cable system. This will prevent damage to
the video product due to lightning and power-line
surges.
13.Overloading
Do not overload power supply and extension cords
as this can result in a risk of fire or electric shock.
14.Object and Liquid Entry
Never push objects of any kind into this video
product through openings as they may touch
dangerous voltage points or short-out parts that
could result in a fire or electrical shock. Ne ver spill
liquid of kind on the video product.
15.Servicing
Do not attempt to service this video product
yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
16.Damage Requiring service
Disconnect this video product from the power
supply and refer servicing to qualified service
personnel under the following conditions.
a. When the power-supply cord or plug is
damaged.
b. If liquid has been spilled, or objects hav e f allen
into the video product.
c. If the video product has been exposed to rain
or water.
d. If the video product does not operate normally
by following the operating instructions in the
instruction manual. Adjust only those controls that
are covered by the instruction manual as an
improper adjustment of other controls may result
in damage and will often require extensive work
by a qualified technician to restore the video
product to its normal operation.
e. If the video product has been dropped or the
cabinet has been damaged.
f. When the video product exhibits a distinct
change in performance-this indicates a need for
service.
17.Replacement Parts
When replacement parts are required, be sure
the service technician has used replacement parts
specified by the manufacturer with the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or
other hazards.
18.Safety Check
Upon completion of any service or repairs to this
video product, ask the service technician to
perform safety checks to determine that the video
product is in proper operating condition.
- 1 -
• The CAUTION label, shown on the left,
is attached on the camera.
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightening flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’ s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING :
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION :
CONNECT 24V AC UL LISTED CLASS 2
POWER SUPPLY.
FIELD INSTALLATION MARKING :
WORDED : “THIS INST ALLATION SHOULD
BE MADE BY A QUALIFIED SERVICE
PERSON AND SHOULD CONFORM TO
ALL LOCAL CODES.”
Note : The camera is indoor used
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital de vice,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonab le protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his o wn expense.
USER-INST ALLER CA UTION : Your authority to operate this FCC verified equipment could be
voided if you make changes or modifications not expressly approved by the party.
- 2 -
1. FEATURES & DESCRIPTION :
IK-DF01A has following function.
(1) Quick install Design- you can manually set the camera direction.
(2) Built in vari-focal lens with auto-iris
Focal length 2.8~5.8mm
(3) Incorporated 1/4type CCD image sensor gives high resolution and excellent
sensitivity
480 lines horizontal resolution
0.5 lx minimum illumination with smoke cover
(4) 50dB Signal-To Noise Patio
(5) Pow er supply- AC24V or DC12V - This camera automatically detects the power.
(6) BLC, AGC, and Line-Lock (AC24V)
2. Cautions :
(1) In order to protect the camera, avoid placing or using it under direct sunlight, r ain or
dust.
(2) Avoid touching the CCD sensor with your fingers. If necessary, use a soft cloth
moistened with alcohol to wipe off any dust.
(3) When the camera is not in use, keep the lens cap attached to protect the CCD
sensor.
(4) Avoid aiming the camera at the sun.
(5) Avoid shooting the camera at intense light. Intense light such as a spotlight may
cause a bloom or smear. A vertical stripe may appear on the screen.
However, this is not a malfunction.
(6) Install the camera away from video noise. If cables are wired near electric lighting
wires or a TV set, noise may appear in images. In this event, relocate cables or
reinstall equipment.
3. Components :
(1) Camera 1
(2) Accessories
(a) Instruction Manual 1
(b) Installation Screw 2
- 3 -
4. PART NAMES & FUNCTIONS :
Knockout
Cut with a knife or scissors
and insert the cables through
the knockout so the cables will
not pinched when installed.
"Bottom" mark
The "Bottom" mark indicates the
lens position. The "Bottom" mark
should be on the top when installing
in a ceiling.
Focus Lever
Adjusts the image into focus. Its screw
design allows locking capability.
Lens Iris ADJ
Use to compensate
for the iris level.
Turn towards L (low)
for a darker picture.
Turn towards H (high)
for a brighter picture.
Optimum value is
adjusted at the
default setting.
V Phase ADJ
Adjusts the phase
difference between
this camera and other
cameras when in Line
Lock mode.
Installation Holes
Installs camera to ceiling with
attached screws.
Lens ADJ Screw
Turn the ring-type screw to adjust the lens pan angle.
Fasten and lock it after completing the adjustment.
Power Input Cable
Connect the power
cable to AC24V or
DC12V. (RED:+12,
Black:GND)
VIDEO Cable (BNC Tap)
Connect the Video Cable to
a monitor or video device.
The image is outputted
when powered on.
Zoom Lever
Changes the picture range.
Its screw design allows
locking capability.
Mode Setting Switch
1:BLC (Backlight Compensation Control
When switched on, it
automatically adjusts to
compensate for subjects that
are lit from behind.
2:AGC (Auto Gain Control)
When switched on, it
automatically adjusts the
image in relation to the
brightness of the subject.
3:DC/AES
Not available for this camera.
Be sure to switch to ON.
4: LL (Line Lock)
Use this switch to set the
camera synchronization to
internal or line lock. Line
Lock is available with AC24V
only.
Tilt ADJ Screws
Turn the screws to adjust the lens tilt
angle. Fasten and lock them after the
adjustment completes.
)
- 4 -
Loading...