Page 1
TOSHIBA HOTPLATE (FOR HOUSEHOLD USE)
Using Instruction Manual
Model: HGN-6B
HGN-6D
HGN-6BI
HGN-6DI
• Thank you for buying Toshiba hotplate today.
• To apply this product safely and properly, please read the
instruction thoroughly to well understand before operation.
• After reading, please keep this manual handy for operation
purposes.
NHNL12530000000 (Cover) 19/3/08, 13:131
Page 2
PARTS AND FUNCTIONS
For the first time operation, please remove the paper of precautions and the papers between the heating
plate, the metal plate and the dimple plate.
Lid Knob
Lid
(For grilling)
Dimple Plate
Handle
Body
Heating Plate
Slide Handle
Control Panel
Metal Plate
Protective Frame
It is detachable for
cleaning
Power Cord
Power Plug
Pilot Lamp
The lamp will be on and off
while using.
Temp Gauge
Temp Adjuster
Adjust the temperature on
the surface of the dimple
plate.
HOW TO INSTALL THE DIMPLE PLATE AND THE METAL PLATE
Install the dimple plate or the metal plate according to the height of the protective frame.
When using the plate
(for hot pot and baking)
Align the slide handle of the protective
frame with • of the symbol.
The protective frame will rise.
NHNL12530000000 (01-07) 19/3/08, 13:351
When using the metal
plate (For grilling)
Align the slide handle of the protective
frame with • of the symbol.s
The protective frame will lower.
Page 3
PROPER OPERATION
For the first time you use this product, the smoke and
the smell may occur. Please be advised that these are
not abnormal. Such smoke and smell will not affect
the operation at all.
Do not leave a pin or d
on the magnetic plug.
It may cause an electric shoc
a short circuit, and fire.
PREPARATION
COOKING
1 Plug the plate in. 2 Cook.
Hot pot and baking
Install the dimple plate and the metal plate, according to the kinds of
cooking, at the center of the body.
Connect the power cord and shift
the temp adjuster to ON/OFF.
Grilling
Hot pot (dimple plate)
1. Put the ingredients in the
dimple plate and close the lid.
2. Shift the temp adjuster to
“HIGH”.
3. If the water boils, adjust the
temperature according to the
cooking menu.
• Do not let the water overflow or
the foods burnt.
• When the plate is used with the gas stove, do not roast, grill, or fry.
The plate may deform and discolor and there may be some corrosion
causing the fluorocarbon-resin peel away.
• Be careful for the use of the dimple plate. If the plate deform, the
specified temperature may alter.
• Be careful not to catch fire on the slide handle.
NHNL12530000000 (01-07) 19/3/08, 13:522
• During the operation, there may
be some strange noise due to
the increasing heat. However,
there are not any damages.
Page 4
Do not leave a pin or dust
on the magnetic plug.
It may cause an electric shock,
a short circuit, and fire.
PROHIBITED
Baking (dimple plate) and grilling (metal plate)
CAUTION
During or right after the operation, do not touch
the hottest parts such as a lid, a dimple plate, or
a metal plate.
Such parts may cause burns due to the high
temperature.There is also high temperature at the
lid knob and at the handle of the metal plate,
so do not touch them with bare hands.
Do Not Touch.
AFTER OPERATION
3 Unplug.
1. Close the lid.
2. Adjust the temperature
according to the cooking
menu and warm the plate.
3. Rub the cooking oil slightly
and cook.
If grilling the meat, the residue of
meat will easily stick on the plate.
Shift the temp adjuster to
“ON/OFF”.
Detach the power cord.
NOTE
Do not leave the cooked foods
on the dimple plate and the
metal plate.
This causes the plate discolor or
the coated fluorocarbon-resin
may peel away because of the
corrosion.
NHNL12530000000 (01-07) 19/3/08, 13:523
Page 5
MAINTENANCE
CAUTION
Maintain the plate after
cooling it off.
Touching the hot part can
cause burns.
Maintain after it
becomes cool.
• Maintain the plate every time after
unplugging.
• Always keep the dimple plate, the metal
plate, and the lid clean.
• In case of using cleaner, please use the
kitchen detergent. Do not use cleanser or a
scrubbing brush, whitening components,
benzene, thinner or alcohol, etc.
Dimple plate and metal plate
The way to maintain and to clean the ditch of the
metal plate is like that of the dimple plate and
the plane surface. Please detach the metal plate
and clean it with a sponge.
When there is a lot of dirt
on the metal plate, install
the plate with the body.
Then pour the water and
boil. After that, scrub the
metal plate with a
resin-coated spatula.
For long-term keeping the
processed fluorocarbon-resin of
the dimple plate
•
Use the resin-coated spatula. Do not use
other metal accessories such as a knife or
a spatula. Such accessories can cause
some scratches on the surface of the
dimple plate.
•
After cooking, maintain the lid right away. If
some moisture or some food particles are left
over in the plate, they may discolor or cause
corrosion which makes the resin peel away.
•
For maintenance, wipe away the moisture
and let it dry. Then rub the plate slightly with
the clean cooking oil.
•
During the operation or after cleaning it by
immersing in the water, there may be some
stains on the resin-coated surface.
However, these do not affect the hygiene
problems. Please feel free to use.
Body and power cord
Remove dirt and foreign matters with the
damp cloth.
• Do not wet or let the water inside the body.
Heating plate
Remove the foreign
matters stuck between
the heating plate.
If there are some foreign matters stuck on
the heating plate firmly, rub such matters
with fine sandpaper (No. 320), available in
local stores, and wipe such matters with the
damp cloth.
• If the plate is used with the stuck matters, the
temperature may alter.
• The dimple plate, the metal plate, and the
heating plate are use together, so some small
scratches on the front or the back of the
surface will not trouble the performance.
Protective Frame
When maintaining, detach it from the body.
Clean it with a sponge and leave it to dry.
How to detach
Raise the protective
frame and detach.
Regarding the maintenance
In case the metal plate is piled on the dimple
plate, please place the towel between them.
If the metal plate is directly put on the dimple
plate, this may cause some scratches.
Lid
Clean the lid with the sponge.
•
Remove the dirt immediately.
•
Do not immerse the lid in the water when it is
hot. It may break.
NHNL12530000000 (01-07) 20/3/08, 9:224
How to install
1 Align the slide handle
of the protective
frame with
body and put the
frame down.
2Move the slide handle
2-3 rounds to make
sure that the frame
is movable.
of the
•
Page 6
SAFETY CAUTION
• Please read this [SAFETY CAUTION] carefully before using. Follow the instruction strictly.
• The caution items shown here are important safety details. Please follow the instruction carefully.
• The signs and the meanings are as follows;
WARNING:
CAUTION :
In case of wrong operation, it possibly causes severe injury and death.
In case of wrong operation, it may cause ∗injury to people, ∗damage to
household equipment.
∗ Injury means; you have to go to the hospital because of wounds, burns, and electric shock.
∗ Household equipment damage means; furniture and household effect.
Signal Explanation
This mark indicates Prohibition (must not do).
The details of the prohibition will be instructed by illustration or sentences
PROHIBITED
MANDATORY
CAUTION
Remove, repairing, remodeling are
prohibited.
It may cause fire and electric shock.
For repair, please contact the shop you
purchased or Toshiba repair information center.
near or in the middle of the signals.
This mark indicates Mandatory (must do)
The details of the mandatory will be instructed by illustration or sentences
near or in the middle of the signals.
This mark indicates Cautions.
The details of the cautions will be instructed by illustration or sentences
near or in the middle of the signals.
WARNING
○○○○○○○○○○○○○○○○○○○○○○○○○
Do not connect or disconnect the
power cord when your hand is wet.
It may cause electric shock and injury.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Remove is prohibited.
Wet Hand is prohibited.
Hold the tip of the power cord when
connecting.
It may cause electric shock, short circuit, smoke
and flame.
Hold the tip when
○○○○○○○○○○○○○○○○○○○○○○○
NHNL12530000000 (01-07) 19/3/08, 13:365
plugging in.
Page 7
WARNING
Don’t let the product wet or spray/
sprinkle the water on the product.
And don’t set the hotplate while it is
wet.
It may cause electric short
and shock.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
For power supply, use the
AC 220 - 240 V outlet
Don’t use any outlet accept
the AC 220 - 240 V, it may
cause fire, electric shock.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Don’t break/scratch, bend, pull,
twist the cord. When bundling the
cord, don’t let the electricity
through. Never keep the cord near
high temperature object or put the
DO NOT WET.
Must use AC 220 - 240 V.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Don’t allow children to touch, keep
it out of reach from the small
children.
It may cause burn, electric shock,
and injury.
PROHIBITED
Don’t use for deep fry food.
It may cause the fire.
PROHIBITED
Don’t use when the cord or the
power plug is broken, or when the
power plug is loose.
It may cause short circuit, an electric shock and
ignition.
heavy object on it. Don’t pinch or do
any process with the cord.
It may cause the cord broken,
fire and electric shock.
Unusual handling is
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
PROHIBITED.
Do not use.
CAUTION
When you disconnect, don’t touch
the cord. Please hold the end point
of the cord to disconnect.
It may cause an electric shock and short circuit
and lead to fire.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Do not use on the unstable ground,
on the object which easily get hot,
near the flame, near the object
which easily burned, and slippery
Hold the plug and pull.
○○○○○○○○○○○○○○○○○○○○○○○
Pull the plug from the AC Outlet
when not in use.
It may cause injury, burns, an electric shock by
insulation, or fire caused by electricity leakage
Unplug.
Do not use near the wall or the
furniture.
The steam or heat may damage the wall or the
furniture and cause color and shape changes.
ground.
It may cause fire.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
NHNL12530000000 (01-07) 19/3/08, 13:366
PROHIBITED
PROHIBITED
Page 8
CAUTION
Don’t touch the lid, dimple plate or
the heat sensor while using or right
after using.
You may get burned from the heat.
As the lid knob may be hot, don’t touch it by
bare hands.
Do not remove the dimple plate
from the frame.
It may cause fire, burns and the change of
color.
○○○○○○○○○○○○○○○○○○○○○○
Do not touch.
Let the product cool before
handling carefully.
You may get burned if you touch the hot part.
Cool off before
○○○○○○○○○○○○○○○○○○○○○○
handling.
Do not directly heat the cans or
bottles up.
It may break or overheat. Also, it may cause
burn and injury.
PROHIBITED
○○○○○○○○○○○○○○○○○○○○○○
Do not use auto adjuster outside
the defined one. And do not use the
auto adjuster with other appliances.
It may cause damage and flame.
○○○○○○○○○○○○○○○○○○○○○○
PROHIBITED
Do not keep wet and/or pour
water on the power inlet of the
dimple plate (electric jointing
part)
It may cause the damage.
Do not use for any purposes
except cooking.
It may cause the damage.
Use the lid carefully.
There may be a scratch and damage. In case
it is broken, holed, or nearly broken, please
change it immediately.
SPECIFICATIONS
Power supply AC 220 - 240 V
50-60 Hz, common
use
Electric consumption 1.3 kW
Economical At “OFF” and
temperature “TEMP.” to about
230°C
NHNL12530000000 (01-07) 21/3/08, 11:187
Appearance size
Dimple Plate Diameter 27 cm x Depth 6.5 cm
Size
Metal plate Diameter 25.6 cm x Depth 3.5 cm
Mass About 5.1 kg (Including the lid,
Wide 39.6 cm x Depth 35.5 cm x
Height 19.7 cm (The height of the
metal plate is about 17.5 cm.)
the dimple plate, the metal
plate, and the power cord)
NHNL12530000000
Loading...