Toshiba ew25 User Manual

TDP-EW25

DATA PROJECTOR

OWNER’S MANUAL

Before UsingPreparationsOperationsMaintenanceOthers

Before Using

SAFETY PRECAUTIONS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING:

USA only

WARNING:

USA only

MODEL NAME: TDP-EW25

TRADE NAME: DATA PROJECTOR MODEL NAME: TDP-EW25

FOR HOME OR OFFICE USE

Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

Lamp contains mercury. Disposal of this product may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org.

USA only

Tested To Comply With FCC Standards

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

RESPONSIBLE PARTY: TOSHIBA AMERICA INFORMATION SYSTEMS, INC.

9740 Irvine Blvd., Irvine, CA 92618-1697 U.S.A Phone: (949) 583-3000

WARNING:

USA only

Notice:

CANADA only

Changes or modiﬁcations made to this equipment, not expressly approved by Toshiba, or parties authorized by Toshiba, could void the user’s authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Before Using

FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

2 3

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND

INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This unit is fully transistorized and does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. Read Owner’s Manual

After unpacking this product, read the owner's manual carefully, and follow all the operating and other instructions.

2. Power Sources

This product should be operated only from the type of power source which does not exceed the voltage range speciﬁed on the

and the power cord.

If you are not sure of the type of power supply to your home, consult your product dealer or local power company.

rating label

3. Source of Light

Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyesight.

4. Ventilation

Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.

5. Heat

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including ampliﬁers) that produce heat.

6. Water and Moisture

Do not use this product near water.

- for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool and the like.

7. Cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft cloth for cleaning.

8. Be sure that you ﬁrmly insert the plug into the wall outlet.

Incorrect or faulty connections may result in ﬁre or electric shock. Avoid using an unsound or loose outlet.

Before Using

9. Power-Cord Protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

10. Overloading

Do not overload wall outlets; to reduce the risk of electric shock, do not use the polarized plug with an extension cord , receptacle, or other outlet unless the blades can be inserted completely with threewire grounding type to prevent blade exposure. As this can result in a risk of ﬁre or electric shock.

4 5

IMPORTANT SAFETY INSTRUCTIONS (Continued)

11. Lightning storms

For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. However, while it is thundering or lightning, do not touch the apparatus and any connected cable and/or equipment. This will prevent you from receiving the electric shock by an electric surge.

12. Object and Liquid Entry

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a ﬁre or electric shock. Never spill liquid of any kind on the product.

13. Do not place or keep the projector within the reach of the children.

It may fall down or tip over, which could result in severe injury.

14. Do not place the product vertically

Do not use the product in the upright position to project the pictures at the ceiling, or any other vertical positions. It may fall down and dangerous.

15. Stack Inhibited

Do not stack other equipment on this product or do not place this product on the other equipment. Top and bottom plates of this product develops heat and may give some undesirable damage to other unit.

16. Moving the projector

When carrying the projector, be sure to use the carrying handle to avoid any damage to the lens or main unit.

17. Attachments

Do not use attachments not recommended by product manufacturer as they may cause hazards.

18. Accessories

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

S3125A

19. Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to qualiﬁed service personnel under the following conditions:

a) When the power-supply cord or

plug is damaged.

b) If liquid has been spilled, or objects

have fallen into the product.

c) If the product has been exposed to

rain or water.

d) If the product does not operate

normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualiﬁed technician to restore the product to its normal operation.

e) If the product has been dropped or

damaged in any way (If the cabinet should break, please handle with care to avoid injury) .

f) When the product exhibits a

distinct change in performance this indicates a need for service.

Before Using

6 7

IMPORTANT SAFETY INSTRUCTIONS (Continued)

20. If glass components, including lens and lamp, should break, contact your dealer for repair service.

This product incorporates glass components, including a lens and a lamp. If such parts should break, please handle with care to avoid injury and contact your dealer for repair service. The broken pieces of glass may cause to injury. In the unlikely event of the lamp rupturing, thoroughly clean the area around the projector and discard any edible items placed in that area.

21. Servicing

Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualiﬁed service personnel.

22. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts speciﬁed by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in ﬁre, electric shock, or other hazards. (Replacement of the lamp only should be made by users.)

23. Safety Check

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

24. Do not leave thermalpaper documents or easily deformed items on top of the unit or near the air exhaust for long periods of time.

The heat from the unit could erase the information on the thermal paper, or cause deformation or warping.

25. Do not use the product in a closed installation state.

Do not place the product in a box or in any other closed installation state. Otherwise it may overheat. This could result in a risk of ﬁre.

26. Do not look into the laser light source of the remote control or direct the laser pointer toward a person or a mirror.

The laser beam may cause damage to the eyesight.

27. When using a wireless LAN function:

• Do not use near people with heart pacemakers.

• Do not use near electronic medical equipment, or in hospitals or other medical institutions.

• Do not use inside aircraft or in places where the wireless LAN function could interfere with electromagnetic signals.

The electromagnetic interference could cause a malfunction, resulting in an accident.

28. If the use of a wireless LAN function interferes with another device’s electromagnetic signals, cease use immediately.

The electromagnetic interference could cause a malfunction, resulting in an accident.

Before Using

8 9

POWER SUPPLY INFORMATION

IMPORTANT PRECAUTIONS (Continued)

If your line voltage is 220 to 240V, use one of the following types of cable/plug.

Plug configuration

Use a 5A fuse which is approved by ASTA or BSI to BSI362. Always replace the fuse cover after changing the fuse.

Plug type

EURO

Line voltage

220 – 240V

Plug configuration

Plug type Line voltage

Australian 240V 10A

Switzerland 240V 6A

North American 240V 15A

200 – 240V

IMPORTANT PRECAUTIONS

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location. When the unit is exposed to such a change in temperature, moisture may condense on the lens and the crucial internal parts. To prevent the unit from possible damage, do not use the unit for at least 2 hours when there is an extreme or sudden change in temperature.

Place and Manner of Installation

•

Do not place in hot locations, such as near heating equipment. Doing so could cause malfunction, and shorten the life of the projector.

•

Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts, shortening their lives, and darkening the screen.

•

Do not use this product in the upright position or tilt it up or down by more than 20° from level. Doing so may cause a failure or shorten the life of the product.

•

Using this instrument near a TV or radio may cause interference to the images or audio sound. If this happens, move it away from the TV or radio.

•

In a high altitude location where air is thin, cooling efﬁciency is reduced so use the projector with [Fan mode] set to [High].

•

Only plug the power cord into outlets rated for use with the power cord’s speciﬁed voltage range. Do not overload extension cords or table taps as this can result in ﬁre or electric shock.

•

Route the power cable or the connecting cable away from where people could trip over it. The projector may fall down, which could result in severe injury.

•

Be sure the power cord is easily reached for unplugging in case of emergency. Do not place any obstacles near a wall outlet in which the cord is plugged.

p.44

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will leave marks on the ﬁnish. Do not use a chemically saturated cloth.

EXEMPTION CLAUSES

•

Toshiba Corporation bears no responsibility in the case of damages arising from natural disaster such as earthquakes, lightning, etc., ﬁre not liable to Toshiba Corporation, acts by third parties, other accidents, or use under abnormal conditions including erroneous or improper operation and other problems.

•

Toshiba Corporation bears no responsibility for incidental damages (lost proﬁt, work interruption, corruption or loss of the memory contents, etc.) arising from the use of or the inability to use this unit.

•

Toshiba Corporation accepts no liability whatsoever for any damages arising from not having followed the descriptions in this Instruction Manual.

•

Toshiba Corporation accepts no liability whatsoever for any damages arising from malfunctions arising from combination with equipment or software that is not related to Toshiba Corporation. Toshiba bears no responsibility for information being intercepted or leaked due to the use

•

of a wireless LAN, or any damages therefore.

In the spaces provided below, record the Model and Serial No. located at the bottom of your projector. Model No. Serial No. Retain this information for future reference.

Before Using

10 11

OTHER INFORMATION REMOTE CONTROL BATTERIES

Copyrights

Showing or transmitting commercial imaging software or broadcast or cable-broad casting programs with the purpose of other than the personal and private viewing, including modifying images using the freeze or resize functions, or displaying with the varying aspect ratio of the images, could violate the direct or indirect copyrights of the imaging software or broadcast program, etc., if done without ﬁrst consulting with the copyright holder. For this reason, please take appropriate measures before performing one of the actions listed above, including obtaining a license from the copyright holder.

Disposal

This product contains substances which are harmful to humans and the environment.

The lamp contains mercury.

• Please dispose of this product or used lamps in accordance with local regulations.

Following information is only for EU-member states:

The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city ofﬁce, your household waste disposal service or the shop where you purchased the product.

Trademarks

•

VGA, SVGA, XGA, SXGA, UXGA, WXGA are trademarks or registered trademarks of International Business Machines Corporation.

•

DLP

(Digital Light Processing) is a registered trademark of Texas Instruments, Inc.

•

Macintosh is a registered trademark of Apple Computer, Inc.

•

Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries.

•

Adobe is a registered trademark and Acrobat Reader is a trademark of Adobe Systems Incorporated.

•

All other brand and product names are trademarks or registered trademarks of their respective companies.

Caution

•

Never throw batteries into a ﬁre. Using the batteries improperly may cause them to explode or leak and lead to burn or injury. If battery-leaking ﬂuid contacts skin, wash the ﬂuid off immediately with clean water and consult a doctor. If the ﬂuid is spilt on an instrument, avoid contact and wipe it off using tissue paper. (Dispose of the used tissue paper as ﬂammable garbage after moistening with water.)

Notes

•

Be sure to use AAA (LR03) size batteries.

•

Dispose of batteries in a designated disposal area.

•

Attention should be drawn to the environmental aspects of battery disposal.

•

Do not mix different battery types or combine used batteries with new ones.

•

If the remote control does not operate correctly, or if the operating range becomes

reduced, replace both batteries with new ones.

•

If the batteries are dead or if you will not be using the remote control for a long time,

remove the batteries to prevent battery acid from leaking into the battery compartment.

Before Using

Notational Conventions Used in This Manual

•

References to pages with related information are annotated as follows. For example, if making a reference to page 36:

•

The illustrations in this document are for reference purposes only and may not reﬂect your package exactly.

p.36

12 13

Before Using

SAFETY PRECAUTIONS ............................................................................... 2

IMPORTANT SAFETY INSTRUCTIONS ......................................................... 4

POWER SUPPLY INFORMATION .................................................................. 10

IMPORTANT PRECAUTIONS ......................................................................... 10

EXEMPTION CLAUSES ................................................................................. 11

OTHER INFORMATION .................................................................................. 12

REMOTE CONTROL BATTERIES .................................................................. 13

CONTENTS .................................................................................................... 14

Preparations

Checking the package contents ...................................................................... 16

Names of each part on the main unit .............................................................. 17

Names of each part on the control panel and remote control ......................... 18

Label location .................................................................................................. 19

Names of the terminals on the rear panel ....................................................... 20

Preparing and using the remote control .......................................................... 21

Operating a computer using the remote control .............................................. 22

Placement ....................................................................................................... 23

Connection ...................................................................................................... 24

Operations

Turning the power on and off ........................................................................... 26

Basic operations .............................................................................................. 28

Using handy features ...................................................................................... 31

Using auto setting (Only for input from computer) ....................................... 31

Correcting the keystone distortion ............................................................... 31

Zooming out the images .............................................................................. 32

Resizing image ............................................................................................ 33

Cutting off the picture and sound temporarily (Mute) ................................... 34

Changing picture mode ................................................................................ 34

Changing screen size .................................................................................. 34

Freezing the image (Freeze) ........................................................................ 35

Setting the password ................................................................................... 35

Using the menus 1 .......................................................................................... 37

Setup using the Setting display .................................................................... 37

The image adjustment menu ....................................................................... 38

The position adjustment menu ..................................................................... 39

The display setting menu ............................................................................. 40

The Default setting menu ............................................................................. 43

Displaying Information (Status display) ........................................................ 45

Before connecting via network ........................................................................ 46

Communication mode .................................................................................. 47

How to use the USB terminal .......................................................................... 48

Using the menus 2 .......................................................................................... 50

Setup using the Setting display (2) .............................................................. 50

Setting up the Network Projector/Network Utility ......................................... 51

Computer settings ........................................................................................ 56

The control setting menu ............................................................................. 57

Setting slideshow options ............................................................................ 58

Checking the projector status .......................................................................... 61

Status display ............................................................................................... 61

Using the Network Projector ........................................................................... 61

Installing the applications ................................................................................ 62

Using the Network Utility ................................................................................. 64

Displaying a computer’s screen via the projector ......................................... 64

Displaying a JPEG image saved on a computer via the projector ............... 66

Displaying a video ﬁle saved on a computer via the projector ..................... 67

Easy Connect utility ..................................................................................... 70

Operating the projector ................................................................................ 74

Projecting images stored in a USB memory ................................................... 75

Playing a slide show from a thumbnail list ................................................... 75

How to use the JPEG Conversion Tool............................................................ 78

Launching the JPEG Conversion Tool ......................................................... 78

Converting ﬁles created with Microsoft

Making a presentation with converted JPEG ﬁles........................................ 80

Creating a screen capture and converting it into a JPEG ﬁle ...................... 81

Setting up the projector using a Web browser ................................................. 82

PowerPoint® .................................. 79

Maintenance

About lamp ...................................................................................................... 85

Lamp replacement .......................................................................................... 86

Lens and main unit cleaning ........................................................................... 89

Others

Trouble indications ........................................................................................... 90

Before calling service personnel ..................................................................... 91

Speciﬁcations .................................................................................................. 93

Before Using

14 15

Preparations

(1) (2) (3) (4) (5) (6) (7)

(8) (9) (10) (11) (12) (13) (14)(15) (16)(17)(14)

Back Front

p.86

p.18

p.21

p.20

p.29

Checking the package contents

Please make sure that the following items are included in the box, along with the main unit. If any item is missing, please contact the store immediately where you purchased the product.

(1) (4) (7)

(2) (5)

(3) (6) (8)

(1) Remote control

(2) LR03 (SIZE AAA) batteries for remote control (2)

(3) CD-ROM

Owner’s Manual

(4)

Note

The shape and number of supplied power cords vary depending on the product destination.

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to ship your projector. For maximum protection, repack the set as it was originally packed at the factory.

The Supplied CD-ROM

The supplied CD-ROM contains an owner’s manual, including information not available for the printed Owner’s manual (Getting started), each Application, Project Management Utility

Manual and Quick Reference in PDF format. (PDF: Portable Document Format) Please use Acrobat Reader 5 or more to view the manual.

Adobe® Acrobat® Reader® or Adobe® Reader



The supplied CD-ROM does not contain Acrobat® Reader®. If you can not read PDF ﬁles, please install Acrobat Reader software in your computer by downloading it from the Adobe Systems website.

Viewing the manual



Run the CD-ROM and double-click on Start.pdf. Acrobat® Reader® launches, and a screen appears asking you that “Select your model”, then click on the model name that you are using. After you select [Owner’s manual] on the next screen, click on the desired language. The Owner’s Manual cover and list of bookmarks appear. Click on’s Manual cover and list of bookmarks appear. Click ons Manual cover and list of bookmarks appear. Click on a bookmark title to view that section of the manual. Click on page with related information. See the Help menu for more information about Acrobat

Reader

16 17

RGB cable (3m)

(5)

Power cord

(6)

Carrying bag

(7)

Mouse remote control receiver

(8)

(See note)

to view a reference

Names of each part on the main unit

Name : Function (1) Air exhaust : Expels air that has grown hot inside the projector. (2) Lamp cover : (3) Control panel : (4) Focusing lever : Adjusts screen focus. (5) Lens : Projects expanded image. (6) Lens cover : (7) Infrared remote sensor : (8) AC IN socket : Connect the supplied power cord here. (9) Main power switch : AC power line ON (standby)/OFF. (10)

Terminals on the rear panel (11) Speaker : Outputs audio sound. (

) Antitheft lock hole : Attach a safety cable or any other antitheft device.

) Air intake : Draws in air from outside the projector for internal cool

(

) Tilt adjuster : (15) Handle : Hold to carry the projector by pulling out. (

16)Foot adjuster release button

(17) Foot adjuster :

Remove to replace lamp. Operates the projector.

Slide shut when not using the projector to protect the lens. Senses commands from the remote control.

Connects external devices.

down. Adjusts the projector’s horizontal tilt.

Press to set up or stow the foot adjuster. Adjusts the vertical projection angle.

Preparations

Names of each part on the control panel and remote control

p.37

p.31

p.26

p.50

p.28

p.31

p.37

p.90

p.26

p.90

p.37

p.31

p.26

p.31

p.28

p.50

p.37

p.22

p.34

p.35

p.52

p.44

p.34

p.33

p.22

Remote ControlControl panel

(11) (12) (13)

(10)

(9)

(8)

(7)

CAUTION

•

Do not look into the laser light source of the remote control

(14) (1)

(2) (3) (4)

(5) (6)

(16) (15)

(23)

(10)

(19) (20)

or direct the laser pointer toward a person or a mirror.

•

Handling and adjusting other than described here may lead to dangerous exposure to laser.

Name : Main Function

(7) (8)

(9)

(1)

Remote control transmitter Laser light source

(12) (4) (5) (3)

(22) (24)

(11) (13)

(14) (2)

Battery cover

(6) (21) (17)

Warning label

(18)

Control panel

(1) ENTER button : Accepts the selected mode. (2) MENU button : (3) ZOOM – button : Adjusts the screen size. (4) AUTO SET button : (5) ON/STANDBY button : (6) NETWORK button : (7) INPUT button : (8) KEYSTONE button : (9) RETURN button : Goes back one screen. (

) Selection button : Menu selections and adjustments, volume control, etc.

Displays menus.

Performs auto-adjustment of input signals from computer. Turns the power on/off (standby). Switches to network input mode. Selects input. Adjusts keystone distortion.

(25)

Name : Main Function

(5) AUTO SET button :

Performs auto-adjustment of input signals from computer. (6) ZOOM button : Adjusts the screen size. (7) INPUT button : (8) NETWORK button :

Selects input.

Switches to network input mode. (9) RETURN button : Goes back one screen. (

) Selection button : Menu selections and adjustments, volume control, etc.

(11) LASER button : Shows a laser pointer. (

) Laser indicator : Lights when laser is on.

) Mouse control button :

( (14) PAGE+ button : (15) MUTE button : (16) FREEZE button :

Controls a mouse pointer.

Proceeds PowerPoint

slides. Cuts off the picture and sound temporarily. Pauses image.

(17) Ten-Key button : Use as a ten-key pad with wireless LAN, from which

numbers and characters can be entered.

(18)

Remote control code switch

(19) PICTURE button : (20) SCREEN SIZE button :

: Sets the code of remote control to that of the projector.

Changes image mode. Changes screen size.

(21) GUIDE button : Displays operation guide for slideshow.

) RESIZE button :

( (23) PAGE- button : (24) R-CLICK button : (25) L-CLICK button :

Enlarges image. Goes back PowerPoint

slides. Functions as right-click of a mouse. Functions as left-click of a mouse.

Note

For the remainder of this manual, buttons are referred to as follows:

• Selection buttons

; ENTER button ⇒

⇒

Label location

Preparations

(11) LAMP indicator : (12) ON/STANDBY indicator : (13) TEMP indicator :

Displays lamp mode. Displays whether power is on or off (standby). Lights when internal temperature is too high.

(14) ZOOM + button : Adjusts the screen size.

Remote control

(1) ENTER button : Accepts the selected mode. (2) MENU button : (3) KEYSTONE button : (4) ON/STANDBY button :

Displays menus. Adjusts keystone distortion. Turns the power on/off (standby).

18 19

Caution – use of controls or adjustments or performance of procedures other than those speciﬁed herein may result in hazardous radiation exposure.

Names of the terminals on the rear panel

p.48

p.96

Approx. 15°

Approx. 5m

Preparing and using the remote control

(7)(4)(3) (6)(5)(2)(1)

(9)(10)

Name : Main Function (1) LAN terminal : Connects a network cable. (2) USB terminal : (3)

COMPUTER 2 IN terminal:Input RGB signal from a computer or other source, or a

(4) AUDIO IN terminal : Input audio signals from a computer, or from video

(5)

COMPUTER 1 IN terminal:Input analog RGB signal from a computer or other source, or

(6) AUDIO (L/R) terminal : Input audio signals from video equipment. (7) VIDEO terminal : Input video signals from video equipment. (8) AC IN socket : (9) CONTROL terminal :

(10) Main power switch : AC power line ON (standby)/OFF.

) MONITOR terminal : Connect to a computer display, etc.

( (

) AUDIO OUT terminal : Outputs audio signals.

(

) AUDIO (L/R) terminal : Input audio signals from video equipment.

(

) S-VIDEO terminal : Input S video signals from video equipment.

Connects a commercial USB memory.

component video signal (Y/P

equipment with a component video signal output terminal.

a component video signal (Y/P

Connects the supplied power cord here. When operating the projector via a computer, connect this

to the controlling computer’s RS-232C port.

(14)(13)(12)(11)(8)

) from video equipment.

B/PR

) from video equipment.

B/PR

Loading dry-cell batteries

into the remote control

Remove the battery cover.

Operating the remote

control

Point toward the projector’s infrared remote sensor, and press a button on the remote control.

Operating the projector from the front

•

Insert the dry-cell batteries.

Be sure to align the plus and minus ends of the batteries properly.

Two batteries (LR03, SIZE AAA) are used.

Replace the battery cover.

When operating the remote control from behind the projector, the signal beam is reﬂected on the projecting surface and may travel a shorter distance to reach the projector depending on the shape and material of the projecting surface.

Dry-cell batteries

•

Before using the batteries, be sure to observe the Safety Precautions described in previous pages.

•

Remove batteries from remote control when not using for extended periods.

•

If the remote control stops working, or if its range decreases, replace all the batteries with new ones.

•

Keep the batteries away from the reach of children. Batteries are choking hazards and can be very dangerous if swallowed. If the batteries are swallowed, seek medical assistance immediately.

The remote control

•

The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or ﬂuorescent lighting.

•

Do not drop or bang.

•

Do not leave in hot or humid locations.

•

Do not get wet or place on top of wet objects.

•

Do not take apart.

•

In rare cases, ambient conditions could impede the operation of the remote control. If this happens, point the remote control at the main unit again, and repeat the operation.

Preparations

20 21

Operating a computer using the remote control

Mouse remote control receiver

To USB port

p.44

90°

Placement

A computer can be operated using the projector’s remote control. This function is available on any computer with the Windows Windows Vista™ OS, that is equipped with a USB port which can support USB1.1 (The mouse remote control receiver is also supported on OS 9 or OS X for the Macintosh). However, please note that Toshiba does not guarantee the operation of all computers.

98/98SE, Windows® Me, Windows® 2000, Windows® XP, or

Connecting a computer

Connect the mouse remote control receiver (supplied) to a computer.

The remote control may fail to operate if the mouse remote control receiver is exposed to bright sunlight or ﬂuorescent lighting.

In such a case, change position or direction of the mouse remote control receiver and retry.

Operating a computer

Operate remote control’s buttons towards the mouse remote control receiver.

Moving the mouse pointer

Press the mouse control button in the direction you wish the mouse pointer to move, then press.

To left click

Press the L-CLICK button.

To right click

Press the R-CLICK button.

To drag and drop

Holding down the L-CLICK button, move the mouse control button until the mouse pointer is over the desired location, then release the L-CLICK button.

Using the computer’s page up [] and down [] function

Press the PAGE+ and PAGE- buttons to switch PowerPoint

Remote Control Front Remote Control Rear

Mouse control

PAGE –

R-CLICK

L-CLICK

PAGE +

22 23

slides.

Placement Styles

As shown in the ﬁgures below, this device can be placed in 4 different styles. The factory setting is “ﬂoor-mounted front projection.” Set the [Projection mode] in the

Default setting 2 menu

Floor-mounted front projection

Ceiling-mounted front projection

, in accordance with your needs.

Floor-mounted rear projection

Ceiling-mounted rear projection

WARNING

Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when

• placing the unit. Attempting to clean or replace the lamp in a high location by yourself may cause you to fall, resulting in injury. If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so.

• Mounting the projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge. Improper mounting could cause the projector to fall, resulting in an accident. If the projector is ceiling-mounted, install the breaker for turning off the power in case

• of anomaly. Let everyone involved with the use of the projector know that fact.

Projection Distance and Size

Use the ﬁgures, tables, and formulas below to determine the projection size and projection distance. (Projection sizes are approximate values for full-size picture with no keystone adjustment.)

Screen

As seen from above

As seen from the side

Lens center

a is the distance (mm, feet) between the lens and the screen, and corresponds to a range of 498 mm (1.63 ft.) to 1526 mm (5.01 ft.).

a = 0.000625 × projection size (inches)projection size (inches)(inches)inches))2 +

12.9175 × projection size (inches) – 32.85

Projection size Projection distance a 41 inches 498 mm (1.63 ft.) 50 inches 615 mm (2.02 ft.) 60 inches 744 mm (2.44 ft.) 80 inches 1005 mm (3.30 ft.) 100 inches 1265 mm (4.15 ft.) 120 inches 1526 mm (5.01 ft.)

Preparations

Connection

p.94

p.96

Before connection

Read the owner’s manual of the device you are connecting to the projector.

• Some types of computer cannot be used or connected to this projector.

• Check for an RGB output terminal, supported signal

•

Turn off the power of both devices before connecting.

•

The ﬁgure is a sample connection. This does not mean that all of these devices can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

Computer

(for control)

To RS-232C terminal

Control cable

Computer

To RGB output

RGB cable (supplied)

To audio output

Audio cable (not supplied)

Computer

To audio output

Audio cable (not supplied)

, etc.

Video recorder, etc.

To audio output White (L)/ Red (R)

To RGB output

RGB cable (not supplied)

To video output

AV cable (not supplied)

Notes

•

The COMPUTER 1 IN terminal functions identically to the COMPUTER 2 IN terminal.

•

The MONITOR OUT terminal outputs signals from the COMPUTER 1 IN terminal or the COMPUTER 2 IN terminal, or outputs Y/P button. If no input is selected, the MONITOR OUT terminal outputs the input signals last selected for each input terminal.

•

Signals are output from MONITOR OUT terminal even in standby mode. However, from AUDIO OUT terminal, no audio signal is output.

•

A computer monitor cannot accept Y/P

•

The AUDIO IN terminal doubles for devices connected to COMPUTER terminals 1 and 2.

•

When an AUDIO OUT terminal is connected, sound is not output from the projector speaker.

•

Output volume of AUDIO OUT terminal can be adjusted by the VOL button.

•

Moving pictures played back on computers using DVD software may appear unnatural if it is projected with this projector, but it is not a malfunction.

B/PR signals as selected with the INPUT

B/PR signals correctly.

Preparations

Audio cable (not supplied)

To audio input White (L)/Red (R)

Audio ampliﬁer, etc. DVD video recorder, etc.

To audio output

Monitor cable Mini D-sub 15P-BNC (not supplied)

To Y/CB/CR output Green (Y)/Blue

Conversion adapter BNC-pin (not supplied)

24 25

Audio cable (not supplied)

)/Red (CR)

S-video cable (not supplied)

To audio output White (L)/ Red (R)

Video recorder,

DVD player, etc.

To S-video output

Operations

Turning the power on and off

Connecting the power cord

Insert the power cord connector

into the AC IN socket of the projector.

Insert the power cord plug into a

wall or other power outlet.

Turning the power on

Power cord connector (Supplied)

Open the lens cover.

Slide the lens cover to open. If it is left closed, the power will not be turned on.

Turn on the main power switch.

The ON/STANDBY indicator will change to orange, indicating standby mode.

Press the ON/STANDBY button.

The power is turned on, and the ON/STANDBY indicator lights in green. After a moment, the start-up screen appears.

Control panel

Remote

control

Notes

•

The start-up screen will disappear after a moment. You can dismiss the start-up screen before this by performing any operation. You can also conﬁgure the start-up screen not

p.35

p.40

p.45

to appear via the Display setting menu The ﬁrst time you use the projector after purchase, after the start-up screen disappears,

• the start menu is displayed

•

When [Key lock] is [On], the operation buttons of the projector do not work

•

When [Password] is [On], enter password then the start-up screen is displayed after the Password entry screen disappears

•

Do not touch the lens directly with your hand. If ﬁngerprints or stains are left on the projection lens surface, they may interfere with the projector’s ability to project images on the screen. If the lens cover is closed while in use, after a moment the power will turn off, then the

• projector goes into standby mode.

Turning the power off

p.28

Press the ON/STANDBY button.

A message appears on the screen, conﬁrming that you wish to shut off the power. This message will disappear after a moment. (This operation is no longer valid after the message disappears.)

Press the ON/STANDBY button again.

When the setting of beep sound is [On], the projector beeps, and the screen disappears, but the internal cooling fan continues to operate. Then, the projector goes into standby mode. During cooling, the ON/STANDBY indicator ﬂashes. While the indicator is ﬂashing, the power can not be turned back on. At this point of time, it does not matter even if you unplug the power cord.

Close the lens cover.

After use, close the lens cover.

Operations

Note

The projector consumes about 10W of power in standby. We recommend that you

•

CAUTION

Do not look into the lens while the lamp is on. The strong light from the lamp may cause

•

damage to your eyesight. Do not block the air intake or exhaust. Doing so could cause a ﬁre due to internal overheating.

•

Do not place your hands, face, or other objects near the air exhaust, the lamp cover or

•

the bottom of the unit. Doing so could cause burns, deform/break the object.

unplug the power cord if you will not be using the projector for an extended period.

Precaution

•

If the power cord is unplugged before cooling is complete or the main power is turned off, give the lamp time (about 5 minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light.

26 27

Basic operations

p.26

p.44

p.40

p.44

p.43

Turn on the power.

Turn on the power by following the instructions in “Turning the power on”

Select the language and the lamp power (When using the

ﬁrst time).

When the projector is used for the ﬁrst time after purchase, the start menu for language (to display the menus and messages on the screen) and lamp power selection and conﬁguration is displayed in English. (If the screen is out of focus, adjust it according to the step 6.)

Use the

press the button.

Message for setup conﬁrmation is displayed in a selected language. Then, the menu for lamp power selection and conﬁguration is displayed. It is automatically set as Standard. To change the setting, follow the step

Use the

button.

The lamp power, if selected, will be toggled without pressing the automatically disappears in a few seconds.

Notes

When the projector is turned on the next time, the start menu does not appear upon

• startup. However, if [Reset all] is executed from the Default setting 2 menu the start menu will be displayed the next time when the power is turned on.

•

The language can also be set via the Display setting menu via the Default setting 2 menu

•

This owner’s manual assumes that English has been selected.

, or button to select the desired language and

English French German Italian Spanish Portuguese Russian Swedish Turkish

or button to select the lamp power and press the

Polish Norwegian Finnish Czech Hungarian Greek Danish Dutch Rumanian

Japanese Chinese (simplified) Chinese (traditional) Korean Indonesian

button. The display

and Lamp power

Notes

When [Auto input search] is set to [Off] in the Default setting 1 menu

• (factory setting is [On]), the Input select menu appears if you press the INPUT button

•

If no signal is being output from the connected equipment, pressing the INPUT button does not change the input and “There is no other input signal.” will appear.

Projector placement angle adjustments

The placement angle and the height of the projected image can be adjusted by the foot adjuster.

Lift up the front of the projector to

the desired angle, then press the foot adjuster release button.

The foot adjuster extends. Release the button to lock the position.

To ﬁne adjust the angle, twist the foot

adjuster.

To adjust the horizontal angle, use the

right and left tilt adjusters.

To stow the foot adjuster, hold up the projector while pressing the foot adjuster

• release button, then slowly lower the projector.

Note

•

When [Auto keystone] is set to [On] in the Default setting 1 menu, the keystone distortion will automatically be corrected based on the projector placement angle. If you do not desire the automatic keystone correction, set [Auto keystone] to [Off].

Operations

Adjusting the screen size and focus

If you wish to make the screen size

smaller, use the ZOOM button to adjust the screen size.

Use the focusing lever to adjust the

focus.

Focusing leverControl panel

Activate the connected device.

Turn on and start the connected device such as a computer.

Press the INPUT button.

An image of the connected equipment is projected. Each time you press the INPUT button, it switches to the input of the connected equipment that is outputting video signals.

28 29

Adjusting the volume with the

buttons

The speaker volume can be adjusted when an audio signal is being input.

+ 35 hidden pages