Toshiba DLP 46HM84 User Manual

Introduction

your TV

Connecting

O

WNER'S

M

ANUAL

DLPTM Projection Television

Using the

Remote Control

your TV

Setting up

46HM84
52HM84
62HM84

Owner's Record

The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.

Model:

Serial No.:

Features

Using the TV’s

Appendix

Index

#01E01_46,52,62HM84 5/31/04, 12:20 PM1

Black

(E) 46HM84, 52HM84, 62HM84

Dear Customer,

Thank you for purchasing this Toshiba TV. This manual will
help you use the many exciting features of your new TV.

Before operating the TV, please read this manual
completely, and keep it nearby for future reference.

Child Safety

It Makes A Difference

Safety Precautions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning symbol in the triangle tells you that
the voltage inside this product may be strong
enough to cause an electric shock. DO NOT TRY
TO SERVICE THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you
that important operating and maintenance
instructions follow this symbol.

NOTE TO CATV INSTALLERS

This is a reminder to call the CATV system installer’s attention to
Article 820-40 of the NEC, which provides guidelines for proper
grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as
close to the point of cable entry as practical. For additional
antenna grounding information, see items 27 and 28 on page 4.

Lamp Unit Replacement

Where Your TV Stands

Congratulations on your purchase! As you enjoy
your new TV, keep these safety tips in mind:

The Issue

 If you are like most consumers, you have a TV in your home.

Many homes, in fact, have more than one TV.

 The home theater entertainment experience is a growing

trend, and larger TVs are popular purchases; however, they
are not always supported on the proper TV stands.

 Sometimes TVs are improperly secured or inappropriately

situated on dressers, bookcases, shelves, desks, audio
speakers, chests, or carts. As a result, TVs may fall over,
causing unnecessary injury.

Toshiba Cares!

 The consumer electronics industry

is committed to making home

entertainment enjoyable and safe.

 The Consumer Electronics

Association formed the Home

Entertainment Support Safety

Committee, comprised of TV and
consumer electronics furniture

manufacturers, to advocate

children’s safety and educate

consumers and their families about

television safety.

CAUTION: HOT SURFACE!
The temperature of the lamp
immediately after use
exceeds 392°F (200°C).

cooled will result in severe burns. ALLOW THE LAMP TO
COOL FOR AT LEAST ONE (1) HOUR BEFORE REPLACING IT.

The lamp in this product has a limited service life. The length
of service life varies depending on product use and user
settings. If you use the lamp beyond its service life:

• you may notice a reduction in the colors and/or brightness of
the picture, at which time you should replace the lamp unit; and

• the strength of the quartz glass in the lamp will be reduced
and the lamp may rupture. If the lamp ruptures, the TV will
not operate until the lamp unit is replaced.

Note: The lamp unit is designed so broken lamp glass
remains securely inside the lamp unit.

See “Appendix” on pages 56–60.

• Dispose of the used lamp unit by the approved method for

your area.

disposal or recycling information, contact your local authorities or the
Electronics Industries Alliance (www.eiae.org).

Touching the lamp before it has

Note:

The lamp unit contains mercury, the disposal of which

may be regulated due to environmental considerations. For

2

Tune Into Safety

 One size does NOT fit all! Use appropriate

furniture large enough to support the weight of your

TV (and other electronic components).

 Use appropriate angle braces, straps, and anchors to secure

your furniture to the wall (but never screw anything directly
into the TV).

 Carefully read and understand the other enclosed

instructions for proper use of this product.

 Do not allow children to climb on or play with furniture

and TVs.

 Avoid placing any item on top of your TV (such as a VCR,

remote control, or toy) that a curious child may reach for.

 Remember that children can become excited while watching

a program and can potentially push or pull a TV over.

 Share our safety message about this hidden hazard of

home with your family and friends. Thank you!

2500 Wilson Blvd.
Arlington, VA 22201 U.S.A.
Tel. [phone] Fax [phone]
www.CE.org

CEA is the Sponsor, Producer and
Manager of the International CES

the

®

#01E02-05_46,52,62HM84 5/31/04, 12:20 PM2

Black

(E) 46HM84, 52HM84, 62HM84

Important Safety Instructions

Installation, Care, and Service

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.

10) Protect the power cord from being

walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where it exits the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use

caution when moving the cart/apparatus
combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing (except as specified on pages
56–60 in this manual) to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, such as the power supply
cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, or the apparatus has been
exposed to rain or moisture, does not operate normally, or
has been dropped.

15) CAUTION: To reduce the risk of electric shock, do not
use the polarized plug with an extension cord, receptacle,
or other outlet unless the blades can be inserted completely
to prevent blade exposure.

16) WARNING: This product contains a lamp to project

the picture, and requires special safety precautions:

• See pages 56–60 for instructions on lamp unit

replacement.

• DO NOT attempt to service this product except as

specified on pages 56–60. The only user-serviceable

items in this product are the lamp unit.

Wide plug

Installation

Follow these recommendations and precautions and heed all
warnings when installing your TV:

17) Never modify this equipment. Changes or modifications
may void: a) the warranty, and b) the user’s authority to
operate this equipment under the rules of the Federal
Communications Commission.

18) DANGER: RISK OF SERIOUS PERSONAL

INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV on

an unstable cart, stand, or table. The TV
may fall, causing serious personal injury,
death, or serious damage to the TV.

19) Never place or store the TV in direct sunlight; hot, humid
areas; areas subject to excessive dust or vibration; or
locations with temperatures at or below 41°F (5°C).

20) Always place the TV on the floor or a sturdy, level, stable
surface that can support the weight of the unit.

21) Never expose the apparatus to dripping or splashing or
place items such as vases, aquariums, any other item filled
with liquid, or candles on top of the TV.

22) Always place the back of the television at least one (1)
inch away from any vertical surface (such as a wall) to
allow proper ventilation.

23) Never block or cover the slots or openings in the TV
cabinet back, bottom, and sides. Never place the TV:

• on a bed, sofa, rug, or similar surface;

• too close to drapes, curtains, or walls; or

• in a confined space such as a bookcase, built-in cabinet,

or any other place with poor ventilation.

The slots and openings are provided to protect the TV
from overheating and to help maintain reliable operation
of the TV.

24) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.

25) Never overload wall outlets and extension cords.

26) Always operate this equipment from a 120 VAC, 60 Hz
power source only.

#01E02-05_46,52,62HM84 5/31/04, 12:20 PM3

Black

(E) 46HM84, 52HM84, 62HM84

(continued on next page)

3

Ground clamp

Antenna discharge unit
(NEC Section 810-20)

Grounding conductors
(NEC Section 810-21)

Power service grounding
electrode system (NEC Art 250 Part H)

Ground clamps

Antenna lead-in wire

Electric service equipment

Installation

(cont. from previous page)

Care

(cont. from previous column)

27) Always make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of the
National Electric Code).

28) DANGER: RISK OF SERIOUS PERSONAL

INJURY OR DEATH!

• Use extreme care to make sure you are never in

a position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines. Never locate the antenna
near overhead power lines or other electrical circuits.

• Never attempt to install any of the following during
lightning activity:
a) an antenna system; or b) cables, wires, or any home
theater component connected to an antenna or phone
system.

Care

For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:

33) For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna from the TV if you leave the TV unattended or
unused for long periods of time.

34

) During normal use, the TV may make occasional snapping

or popping sounds. This is normal, especially when the
unit is being turned on or off. If these sounds become
frequent or continuous, unplug the power cord
and contact a Toshiba Authorized Service Center.

35)

Special care for DLP

•

Lamp—The lamp in this product has a limited service life.

TM

(digital light processing) units:

The length of service life varies depending on product
use or user settings. If you use the lamp beyond its
service life:

- you may notice a reduction in the colors and/or

brightness of the picture, at which time you should
replace the lamp unit; and

- the strength of the quartz glass in the lamp will be

reduced and the lamp may rupture. If the lamp ruptures,
the TV will not operate until the lamp unit is replaced.

See “Appendix

Note:

• The lamp unit is designed so broken lamp glass remains

securely inside the lamp unit.

information, please contact your local authorities or the
Electronics Industries Alliance (www.eiae.org).

• Dispose of the used lamp unit by the approved method for

your area.

” on page

• The lamp unit contains mercury. Disposal of

mercury may be regulated due to environmental
considerations. For disposal or recycling

s 56–60.

29) Always sit approximately 10–25 feet away from the TV and
as directly in front of it as possible. The picture can appear
dull if you sit too far to the left or right of the TV, or if
sunlight or room lights reflect on the screen. Turn the TV
off to check for reflections on the screen, and then remove
the source of reflections while viewing the TV.

30) Always unplug the TV before cleaning. Never use liquid or
aerosol cleaners. Clean only with a dry cloth.
Do not spray volatile compounds such as insecticide on
the cabinet. This may cause a discoloration or damage of
the cabinet.

31) WARNING: RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of any
kind into the TV cabinet slots.

32) If the air temperature rises suddenly (for example, when
the TV is first delivered), condensation may form on the
lenses. This can make the picture appear distorted or the
color appear faded. If this happens, turn off the TV for 6 to
7 hours to allow the condensation to evaporate.

Service

36

) WARNING: RISK OF ELECTRIC SHOCK!

Never attempt to service the TV yourself,

except as specified on pages 56–60.
Opening and removing the covers may expose you to
dangerous voltage or other hazards. Failure to follow this
WARNING may result in death or serious injury. Refer all
servicing not specified in this manual to a Toshiba Authorized
Service Center.

37) If you have the TV serviced:

• Ask the service technician to use only replacement parts

specified by the manufacturer.

• Upon completion of service, ask the service technician to

perform routine safety checks to determine
that the TV is in safe operating condition.

38)When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the TV.

Note: The lamp unit contains mercury. Disposal of mercury may
be regulated due to environmental considerations. For disposal
or recycling information, please contact your local authorities or
the Electronics Industries Alliance (www.eiae.org).

4

#01E02-05_46,52,62HM84 5/31/04, 12:20 PM4

Black

(E) 46HM84, 52HM84, 62HM84

Important notes about your DLPTM projection TV

1) The light source for this TV is a projection lamp unit with a
limited service life. When the lamp wears out, the picture
may become dark or black, or the lamp may fail, at which
time you must replace the lamp unit. See “Lamp unit
replacement” on pages 56-60.

2) Each time you turn on the TV, it may take up to several
seconds to go from no picture to full picture brightness.

3) The display on this TV is manufactured using an extremely
high level of precision technology; however, an occasional
pixel (dot of light) may show constantly on the screen.
This is a structural property of micro-display projection TV
and is not a sign of malfunction. Such pixels are not visible
when the picture is viewed from a normal viewing
distance (see item 29 on page 4).

4) Depending on the media you are viewing, it is possible,
although unlikely, that a limited number of viewers may
see a “rainbow effect” on the screen, which can, in rare
instances, result in eye fatigue. This is a rare occurrence
and is not a sign of TV malfunction.

5) Always sit approximately 10–25 feet away from the TV and
as directly in front of it as possible. The picture quality may
be affected by your viewing position and length of viewing
time. If you sit too closely to the TV for too long, you may
suffer from eye fatigue. See item 29 on page 4.

6) This TV contains several cooling fans to moderate

the internal temperature. You may be able to hear

the fans for several minutes after the TV is turned
off. This is a function of the Quick Restart standby mode
and is not a TV malfunction. You can set the Quick Restart
feature to stop the fans as soon as the TV is turned off.
See “Selecting the Quick Restart” on page 25.

7) The green and red LED lights on the control touchpad (on
the lower right corner of the TV screen) indicate your TV’s
current status. If either light flashes, see “LED indications”
on page 60 for details.

8) Review all safety and operating information in this owner’s
manual before you use your TV.

The DLP™ logo and DLP™ medallion are trademarks of Texas Instruments.

#01E02-05_46,52,62HM84 5/31/04, 12:20 PM5

Black

(E) 46HM84, 52HM84, 62HM84

5

Important Safety Information............................. 2-5

Introduction................................................................ 7

Welcome to Toshiba......................................................... 7

Exploring your new TV ................................................... 7

Connecting your TV .................................................. 8

Connecting a VCR .......................................................... 9

Connecting a cable converter box .................................... 9

Connecting a cable converter box and VCR................... 10

Connecting a DVD player or satellite receiver and

a VCR............................................................................ 11

Connecting a DVD player with ColorStream

®

(component video) and a VCR ...................................... 12

Connecting a DTV receiver/set-top box with

ColorStream® (component video) and a VCR................ 13

Connecting two VCRs ................................................... 14

Connecting a camcorder ................................................ 14

Connecting an HDMI™ or a DVI device to the

HDMI input ................................................................. 15

Connecting an audio system .......................................... 16

Using the remote control ...................................... 17

Preparing the remote control for use .............................. 17

Installing the remote control batteries ............................ 17

Remote control effective range .......................................17

Programming the remote control to operate a cable
converter box, satellite receiver, VCR, DVD player,

or HTIB (home theater in a box) ...................................18

Remote control codes ....................................................18

Remote control codes (cont.) ......................................... 19

Using the remote control to operate a cable converter
box, satellite receiver, VCR, DVD player, or HTIB

(home theater in a box) .................................................. 20

Learning about the remote control ................................. 21

Setting up your TV .................................................. 22

Learning about the menu system ................................... 22

Changing the on-screen display language ....................... 23

Selecting the antenna input............................................ 23

Adding channels to the TV’s memory ............................ 24

Programming channels automatically ......................24

Adding and erasing channels manually.................... 25

Changing channels ........................................................ 25

Selecting the Quick Restart ............................................ 25

Using the TV’s features.......................................... 26

Adjusting the channel settings........................................ 26

Switching between two channels using Channel

Return .................................................................... 26

Switching between two channels using

SurfLock™ ............................................................. 26

Programming your favorite channels ....................... 26

Labeling channels ...................................................28

Viewing the wide-screen picture formats

(480i, 480p and 1080i signals only) ............................29

Selecting the picture size ......................................... 29

Scrolling the Theater Wide picture

(Theater Wide 2 and 3 only) .................................. 31

Using the AUTO ASPECT feature ......................... 32

Using the POP double-window feature .......................... 33

Switching the main and POP pictures..................... 34

Switching the speaker audio (main or POP)............ 34

Double-Window aspect ratio .................................. 35

Using the programmed channel search function............. 35

Using the favorite channel search function .............. 36

About the auto favorite feature................................ 36

Using the LOCKS menu ............................................... 37

Entering the PIN code ............................................ 37

If you cannot remember your PIN code .................. 37

Using the V-CHIP menu ............................................... 37

ENABLE BLOCKING .......................................... 38

TV RATING (Independent rating system for

broadcasters) ........................................................... 38

MPAA RATING (Independent rating system for

movies) ................................................................... 39

BLOCKING OPTION.......................................... 39

Unlocking programs temporarily ............................ 40

Locking channels ........................................................... 40

Locking the video inputs................................................ 42

Changing the PIN code ................................................. 42

Adjusting the picture ..................................................... 43

Selecting the picture mode ......................................43

Adjusting the picture quality ................................... 43

Saving new preference ............................................. 44

Selecting the color temperature ............................... 44

Using the CableClear™ DNR feature .................... 45

Resetting picture adjustments ................................. 45

Selecting the lamp mode ......................................... 46

Selecting the cinema mode...................................... 46

Selecting the video input source .....................................47

Labeling the video input sources .................................... 47

Using the closed caption feature..................................... 48

Setting the ON timer ..................................................... 49

Setting the sleep timer.................................................... 49

Setting the clock ............................................................ 50

Adjusting the sound ....................................................... 51

Muting the sound ................................................... 51

Selecting stereo/SAP broadcasts .............................. 51

Using the WOW™ surround sound feature ........... 52

Adjusting the sound quality .................................... 52

Resetting your audio adjustments ........................... 53

®

Using the StableSound

feature .............................. 53

Turning off the built-in speakers ............................. 54

Selecting the Audio OUT sound............................. 54

Selecting the background of the menu display ............... 55

Displaying on-screen information .................................. 55

Understanding the auto power off feature ...................... 55

Understanding the last mode memory feature ................ 55

Appendix................................................................... 56

Lamp unit replacement .................................................. 56

When to replace the lamp unit................................ 56

How to replace the lamp unit ................................. 57

Lamp unit disposal ................................................. 60

LED indications ............................................................60

Specifications ................................................................. 61

Tr oubleshooting .............................................................62

Limited United States Warranty .....................................63

Limited Canada Warranty .............................................. 64

Index .......................................................................... 65

6

#01E06_46,52,62HM84 5/31/04, 12:20 PM6

Black

(E) 46HM84, 52HM84, 62HM84

Introduction

Welcome to Toshiba

Congratulations! You have purchased one of the finest DLP
projection TVs on the market. The goal of this manual is to guide you
through setting up and operating your Toshiba TV as quickly as
possible.

This manual applies to models 46HM84, 52HM84 and 62HM84.
The model and serial numbers are on the back of your TV. Write
these numbers in the space provided on the front cover of this manual
for your records.

Instructions in this manual are based on using the remote control.
You can also use the controls on the TV if they have the same name as
those on the remote control.

Please read all the safety and operating instructions carefully, and keep
the manual for future reference.

Exploring your new TV

You can operate your TV using the control touchpad on the TV front
or the remote control. The back panel and side panel (behind the
door) provide all the terminal connections you will need to connect
other equipment to your TV. See “Connecting your TV” on page 8.

Illustrations represent 52HM84.

Front

MENUVOLUMECHANNELEXITTV/VIDEO POWER

Remote sensor

(Behind the screen)

Side

Push to open.

Control touchpad on TV front (Gently touch the printed keys.)

EXIT

TV/VIDEO

Channel zy

* Green ON = Touchpad key being pressed;

Red ON = Power ON.
See page 60 for additional LED indications.

Video 3
Video/audio inputs

IN

TM

zyx •

Volume x •

ANT OUTAUDIO

ANT-2
IN

MENU

ANT-1
IN

See “Important notes about
your DLPTM projection TV” on
page 5.

POWER

MENUVOLUMECHANNELEXITTV/VIDEO POWER

Green and Red
LED indicators*

Remote control

RECALL

TV / VIDEO

INFO

123

456

89

7

+10

0

100

U

N

E

FAV

M

P

O

T

FAVORITE

MENU

DVDMENU

ENTER

E

N

T

FAV

E

R

TV
CBL/SAT
VCR
DVD

TV/VCR PAUSE

CH SCAN

REC

VOLCH

POP DIRECT CH MUTE SLEEP

STOP

FREEZE SOURCE

FFREW

SKIP / SEARCH

SWAP POP CH

POWER

CHRTN

ENT

PIC SIZE

G

EXIT

PLAY

SPLIT

LIGHT

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

U

I

D

E

R

A

E

L

C

Features

Using the TV’s

#01E07_46,52,62HM84 5/31/04, 12:20 PM7

Black

(E) 46HM84, 52HM84, 62HM84

Back

VIDEO 1/2

ColorStream

HD-1/HD-2

Video/audio OUT

Var iable
Audio OUT

Appendix

CT-90159

Index

HDMI IN

7

Connecting your TV

Note: Cables are not supplied with your TV.

Introduction

your TV

Connecting

Using the

Remote Control

●

●

●

●

●

This connection allows you to watch TV programs or basic cable
channels.

Coaxial cable is the cable that comes in from your antenna, cable TV
service, or cable converter box. Coaxial cable uses “F” connectors.

Standard A/V (audio/video) cables usually come in sets of three, and
are typically color-coded according to use: yellow for video, red for
stereo right audio, and white for stereo left (or mono) audio.
On your TV’s back panel, the standard A/V inputs are color-coded in
the same manner as the cables.

S-Video cable is for use with video equipment that has an S-Video input.
Component video cables come in sets of three, and are for use with

video equipment that has component video inputs. (ColorStream® is
Toshiba’s brand of component video.)

HDMI is for use with video equipment that has an HDMI type A
connector (see page 15).

From Antenna or Cable

TV

Coaxial (antenna) cable

Standard A/V cables (red/white/yellow)

S-video cable

Component video cables

HDMI cable

WARNING:
RISK OF ELECTRIC SHOCK !

Never plug in any power cords
until you have finished connecting all
equipment.

your TV

Setting up

Features

Using the TV’s

Appendix

Index

8

#01E08-16_46,52,62HM84 5/31/04, 12:20 PM8

Black

(E) 46HM84, 52HM84, 62HM84

Connecting a VCR

This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.

You will need:

• two coaxial cables

• one set of standard A/V cables

From Cable Box or Antenna

Stereo VCR

IN from ANT OUT to TV
CH 3

CH 4

TV

VIDEO

IN

OUT

LR

AUDIO

Note:

If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S­video cable (in the S-video jacks) instead of
the standard video cable.

Do not connect a standard video cable and
an S-video cable to Video-1 (or Video-2) at
the same time, or the picture performance
will be unacceptable.

The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.

Introduction

your TV

Connecting

Using the

Remote Control

Connecting a cable converter box

This connection allows you to watch basic and premium cable channels
To watch basic cable and use the TV’s features, select ANT-1. To view

premium channels, select ANT-2, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the converter box
to change channels.

You will need:

• three coaxial cables

TV

From Cable

INOUT

Note:

.

When you use a converter box with your TV,
the remote control will not operate some
features, such as programming your favorite
channels, labeling channels, and locking
channels.

your TV

Setting up

Features

Using the TV’s

Appendix

#01E08-16_46,52,62HM84 5/31/04, 12:20 PM9

Black

(E) 46HM84, 52HM84, 62HM84

Cable converter box

Index

9

Connecting a cable converter box and VCR

This connection allows you to watch and record basic and premium
cable channels, watch videotapes, and record one channel while

Introduction

your TV

Connecting

Using the

Remote Control

watching another channel. To watch basic cable and use the TV’s
features, select ANT-1.
To view premium channels or record with the VCR, select ANT-2,
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), and use the converter box to change channels.

You will need:

• four coaxial cables

• one set of standard A/V cables

TV

From Cable

Note:

If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S­video cable (in the S-video jacks) instead of a
standard video cable. Do not connect a
standard video cable and an S-video cable to
Video-1 (or Video-2) at the same time, or the
picture performance will be unacceptable.

When you use a converter box with your TV,
the remote control will not operate some
features, such as programming your favorite
channels, labeling channels, and locking
channels.

The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.

your TV

Setting up

Features

Using the TV’s

Appendix

IN from ANT OUT to TV
CH 3

CH 4

Stereo VCR

VIDEO

IN

OUT

LR

AUDIO

INOUT

Cable converter box

Index

10

#01E08-16_46,52,62HM84 5/31/04, 12:20 PM10

Black

(E) 46HM84, 52HM84, 62HM84

Connecting a DVD player or satellite receiver
and a VCR

This connection allows you to watch DVD/satellite, VCR, and TV
programs, and record one TV channel while watching another
channel.

You will need:

• two (or three, if satellite receiver is used) coaxial cables

• one set of standard A/V cables (between the TV and VCR) (plus
one additional set of standard A/V cables if satellite receiver is
used)

• one S-video cable (between the TV and DVD player/satellite
receiver)

• one pair of standard audio cables (between the TV and DVD
player/satellite receiver)

Stereo VCR

IN

OUT

LR

AUDIO

From

Antenna

IN from ANT OUT to TV
CH 3

CH 4

TV

VIDEO

Note:

For the highest possible picture quality from a
DVD player or satellite receiver without
component video or HDMI, use an S-video
cable. (If your DVD player has component
video, see page 12. If your DVD player or
satellite receiver has HDMI or DVI, see page

15.)
Do not connect both an S-video cable and a

standard video cable between the TV and
DVD player/satellite receiver at the same time
or the picture performance will be
unacceptable.

Do not connect the DVD player/satellite
receiver and VCR to the same set of Video
input on the TV. (See the illustrations, which
show the DVD player/satellite receiver
connected to Video-1 on the TV, and the VCR
connected to Video-2 on the TV.)

The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

From

Satellite

Dish

IN from ANT

S-VIDEO

S-VIDEO

VIDEO

OUTOUT

VIDEO

OUTOUT

DVD Player

AUDIO

OUT

L

R

Satellite Receiver

AUDIO

OUT

L

R

Features

Using the TV’s

Appendix

Index

11

#01E08-16_46,52,62HM84 5/31/04, 12:20 PM11

Black

(E) 46HM84, 52HM84, 62HM84

Connecting a DVD player with ColorStream
(component video) and a VCR

This connection allows you to watch DVD, VCR, and TV programs,

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

and record TV programs.
Your TV has ColorStream

your TV to a DVD player with component video inputs (such as a
Toshiba DVD player with ColorStream
quality and realism.

–To record one TV program while watching another TV program,

–To record a TV program while watching a DVD, tune the VCR to

You will need:

®

®

(component video) inputs. Connecting

®

) can greatly enhance picture

tune the VCR to the channel to record, and tune the TV to the
channel to watch.

the channel to record, and select ColorStream HD1 on the TV (see
“Selecting the antenna input” on page 23).

• two coaxial cables

• one set of standard A/V cables

• one pair of standard audio cables

• one set of component video cables (one S-video cable for a DVD
player without component video inputs; see notes at right)

From
Antenna

Stereo VCR

IN from ANT OUT to TV
CH 3

CH 4

TV

VIDEO

IN

OUT

LR

AUDIO

Note:

For the highest possible picture quality, use
component video cables (or an HDMI cable)
between the TV and DVD player.

You can connect the component video cables
to either set of ColorStream jacks on the TV
(HD1 or HD2).

For HDMI or DVI connection, see page 15.
The ColorStream HD1/HD2 and HDMI jacks

can be used with Progressive (480p, 720p)
and Interlaced (480i,1080i) scan systems;
however, a 1080i signal will provide the best
picture performance.

If your DVD player is not compatible with
component video, HDMI or DVI, use the S­video connections (plus the standard audio
connections) instead (see page 11).

The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.

Features

Using the TV’s

Appendix

Index

12

P

Y

S-VIDEO

COMPONENT VIDEO

DVD player with component video

RPB

VIDEO

OUT

L

R

AUDIO

OUT

L

R

#01E08-16_46,52,62HM84 5/31/04, 12:20 PM12

Black

(E) 46HM84, 52HM84, 62HM84

Connecting a DTV receiver/set-top box with
ColorStream® (component video) and a VCR

This connection allows you to watch DTV (digital TV), VCR, and
TV programs, and record DTV and TV programs.

Your TV has ColorStream (component video) inputs. Connecting
your TV to a DTV receiver with component video inputs can greatly
enhance picture quality and realism.

–To record and watch a DTV program, select LINE IN on the

VCR, and select ColorStream HD2 (or VIDEO 1 for a non­ColorStream connection) on the TV (see “Selecting the antenna
input” on page 23).

–To record a TV program while watching a DTV program, tune the

VCR to the channel to record, and select ColorStream HD2 on the
TV.

–To record and watch the same TV program, tune the VCR to the

channel to record, and select VIDEO 1 on the TV.

–To record one TV program while watching another TV program,

tune the VCR to the channel to record, and tune the TV to the
channel to watch.

You will need:

• three coaxial cables

• two sets of standard A/V cables

• one pair of standard audio cables

• one set of component video cables (one S-video cable for a DTV
receiver without component video; see notes at right)

From Antenna

Stereo VCR

Note:

For the highest possible picture quality, use
component video cables (or an HDMI cable)
between the TV and DTV receiver/set-top
box.

You can connect component video cables to
either set of ColorStream jacks on the TV
(HD1 or HD2).

For HDMI or DVI connection, see page 15.
The ColorStream HD1/HD2 and HDMI jacks

can be used with Progressive (480p, 720p)
and Interlaced (480i, 1080i) scan systems;
however, a 1080i signal will provide the best
picture performance.

If your DTV receiver or set-top box is not
compatible with component video or HDMI,
use the S-video connections (plus the
standard audio connections) instead (see
page 11).

The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

From
DTV Antenna

DTV Receiver with component video

IN from ANT OUT to TV
CH 3

CH 4

TV

Satelite IN

S-VIDEO

VIDEO

Y

COMPONENT VIDEO

LR

AUDIO

P

RPB

IN

OUT

VIDEO

OUT

AUDIO

OUT

LRL

Features

Using the TV’s

Appendix

R

Index

#01E08-16_46,52,62HM84 5/31/04, 12:20 PM13

Black

(E) 46HM84, 52HM84, 62HM84

13

Connecting two VCRs

This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape. You can also record from

Introduction

your TV

Connecting

one TV channel while watching another TV channel.
You will need:

• two coaxial cables

• two sets of standard A/V cables

From
Antenna

VCR1

IN from ANT OUT to TV
CH 3

CH 4

TV

VIDEO

IN

OUT

LR

AUDIO

Note:

If you have VCRs with S-video, use S-video
cables instead of standard video cables for
better picture performance. Do not connect
both a standard video cable and an S-video
cable to Video-1 (or Video-2) at the same
time, or the picture performance will be
unacceptable.

Do not connect the same VCR to the output
and input jacks on the TV at the same time.
To dub or edit, VCR 2 must select Line IN,
and the TV must select VIDEO 1 (see
“Selecting the antenna input” on page 23).

*The Video OUT jack does not output the

POP picture.

** The Audio OUT jacks can output the sound

of either the Main or POP picture (see
“Selecting the Audio OUT sound” on page

54).

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

VCR2

CH 3
CH 4

*

VIDEO AUDIO

LR

**

IN

OUT

Connecting a camcorder

This connection allows you to watch video materials recorded on a
camcorder.

You will need:

• one set of standard A/V cables

The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.

Note:

If you have a camcorder with S-video, use an
S-video cable instead of a standard video
cable for better picture performance. Do not
connect

both a standard video cable and an
S-video cable at the same time, or the picture
performance will be unacceptable.

Appendix

Index

14

#01E08-16_46,52,62HM84 5/31/04, 12:20 PM14

Black

(E) 46HM84, 52HM84, 62HM84

VIDEO

AUDIO

OUT

L

R

Camcorder

Video-3 (side panel)

Connecting an HDMI™ or a DVI device to the HDMI input

The HDMI
and uncompressed digital video from an HDMI
device or uncompressed video from a DVI

This input is designed to accept HDCP
material in digital form from EIA/CEA-861/861B–
compliant
top box or DVD player with HDMI or DVI output).

The HDMI input is designed for best performance
with 1080i high-definition video signals, but will also
accept and display 480i, 480p, and 720p signals.

Note: This TV is not intended for connection to
and should not be used with a PC (personal
computer).

To connect an HDMI device, you will need:

• one HDMI cable (type A connector)

[1]

input on your TV receives digital audio

[2]

device.

[3]

program

[4]

consumer electronic devices (such as a set-

For proper operation, it is recommended that you use
a shorter HDMI cable. You should not encounter
difficulty if you use an HDMI cable which is shorter
than 16.4ft (5m).

HDMI cable transfers both video and audio. Separate
analog audio cables are not required (see illustration
below). Some CDVs (Video CDs) may not output
digital audio signals. In that case, you may hear a
sound by connecting analog audio cables. However, if
you connect analog audio cables with this
connection, the HDMI terminal on the TV will not
receive the HDMI digital audio signal and you will
hear analog audio only.

[1]

HDMI = High-Definition Multimedia Interface.

[2]

DVI = Digital Video Interface.

[3]

HDCP = High-bandwidth Digital Content Protection.

[4]

EIA/CEA-861/861B compliance covers the transmission of
uncompressed digital video with high-bandwidth digital
content protection, which is being standardized for reception
of high-definition video signals. Because this is an evolving
technology, it is possible that some devices may not operate
properly with the TV.

To ensure that the HDMI or DVI device is reset
properly, it is recommended that you follow
these procedures:

•When turning on your electronic components,

turn on the TV first, and then the HDMI or
DVI device.

•When turning off your electronic components,

turn off the HDMI or DVI device first, and
then the TV.

To connect a DVI device, you will need:

• one HDMI

–to–

DVI adapter cable

(HDMI type A connector)

For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 9.8 ft (3m). The
recommended length is 6.6 ft (2m).

• one pair of standard analog audio cables

An HDMI-to-DVI adapter cable transfers only video.
Separate analog audio cables are required (see
illustration below).

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

HDMI device

VIDEO AUDIO

LR

IN

OUT

TV

HDMI, the HDMI logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.

HDMI OUT

DVI device

TV

VIDEO AUDIO

LR

DVI

IN

OUT

OUT

Features

Using the TV’s

Appendix

Index

#01E08-16_46,52,62HM84 5/31/04, 12:20 PM15

Black

(E) 46HM84, 52HM84, 62HM84

15

Connecting an audio system

This connection allows you to adjust the audio level by using the TV’s
remote control.

Introduction

your TV

Connecting

To control the audio, turn on the TV and the stereo amplifier, and
turn off the built-in speakers (see “Turning off the built-in speakers”
on page 54).

You will need:

Note:

To hear sound when using an external audio amplifier, the
volume of both the TV and the amplifier must be set
above 0 (zero).

For example, if the volume of the TV is set to 0, you will
not be able to hear any sound, even the volume of the
amplifier is at its highest level.

• one pair of standard audio cables

Amplifier

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

TV

LINE IN
LR

Appendix

Index

16

#01E08-16_46,52,62HM84 5/31/04, 12:20 PM16

Black

(E) 46HM84, 52HM84, 62HM84

Using the remote control

Preparing the remote control for use

Your TV remote control can operate your TV and many cable
converter boxes, satellite receivers, VCRs, DVD players, and HTIBs
(home theater in a box), even if they are different brands.

If you have a Toshiba device:

Your TV remote control is preprogrammed to operate most Toshiba
devices. See page 20.

If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to
operate:

You can program the TV remote control so it will operate the other
device. See pages 18–20.

Installing the remote control batteries

1. Remove the battery cover from the back of the remote control.

Squeeze tab and
lift cover.

2. Install two “AA” size batteries, making sure to match the + and –
signs on the batteries to the signs on the battery compartment.

3. Reinsert the battery cover in the remote control until the tab
snaps.

Remote control effective range

For optimum performance, aim the remote control directly at the TV
and be sure there is no obstruction between the remote control and
the TV.

Caution:

• Do not mix battery types or combine used
batteries with new ones.

• Do not throw batteries into a fire.

Note:

• If your Toshiba TV remote control does not
operate all the features of your other
device, use the original remote control for
that device.

• Dispose of batteries in a designated
disposal area.

• Attention should be drawn to the
environmental aspects of battery disposal.

• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace both batteries with new
ones.

• If the batteries are dead or if you will not
use the remote control for a long time,
remove the batteries to prevent battery acid
from leaking into the battery compartment.

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

#01E17-21_46,52,62HM84 5/31/04, 12:20 PM17

Black

(E) 46HM84, 52HM84, 62HM84

Appendix

Index

17

Programming the remote control to operate a
cable converter box, satellite receiver, VCR,
DVD player, or HTIB (home theater in a box)

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

Your Toshiba TV remote control is preprogrammed to operate most
Toshiba devices. To program your TV remote control to operate a
non-Toshiba device (or a Toshiba device that it is not preprogrammed
to operate), follow the steps below. For details on using the remote
control to operate the device, see page 20.

Remote control codes

In some cases you may not be able to operate your device with the TV

Features

Using the TV’s

remote control. Your other device may use a code that is not
recognized by the TV remote control. If this happens, use the device’s
remote control.

1. In the remote control code table (below and on the next page),
find the code for your device. If more than one code is listed, try
each one separately until you find one that works.

2. Set the Device Switch to the type of device you are programming
the remote control to operate — CBL/SAT (for a cable converter
box or satellite receiver), VCR (for a VCR or TV/VCR combo),
or DVD (for a DVD player or HTIB [home theater in a box]).

3. While holding down RECALL, press the Channel Number
buttons to enter the 3-digit code for your device.

4. To test the code, turn on the device, point the remote control at
it, and press POWER. See note at right.

•If the correct code was entered, the device will turn off.

•If the device does not respond, repeat steps 1 – 4 using
another code.

•If the device does not respond to another code, you will need
to use the remote control that came with the device.

5.

Remember to set the Device Switch back to TV to control the TV.

6. For future reference, write down the code(s) you used:

DEVICE CODE DEVICE CODE

POWER

RECALL

TV / VIDEO

INFO

123

456

RECALL
POWER

Channel

89

7

+10

100

U

N

E

M

P

O

T

FAVORITE

ENTER

E

N

T

E

R

TV
CBL/SAT
VCR
DVD

POP DIRECT CH MUTE SLEEP

TV/VCR PAUSE

Note:

CH SCAN

• In addition to POWER, confirm that all

REC

0

FAV

MENU

DVDMENU

FAV

VOLCH

STOP

FREEZE SOURCE

FFREW

SKIP / SEARCH

SWAP POP CH

CHRTN

ENT

PIC SIZE

G

EXIT

PLAY

SPLIT

LIGHT

U

I

D

E

R

A

E

L

C

Number

Device Switch

necessary keys on the TV remote control
operate your device. If some keys are not
operational, repeat the device code setup
using another code (if other codes are
listed for your device). If, after trying all
listed codes, the necessary keys do not
operate your device, use the device’s
original remote control.

• Every time you change the batteries, you
will need to reprogram the remote control.

• Some newer VCRs respond to either of two
codes. These VCRs have a switch labeled
“VCR1/VCR2.” If your VCR has this kind of
switch and does not respond to the codes
for your VCR brand, set the switch to the
other position (“VCR1” or “VCR2”) and
reprogram the remote control.

Cable converter
box

ABC: 061, 062, 063,

082, 084, 087, 091,
092, 096, 098

Appendix

Archer: 065, 092, 097,

099
Cableview: 064, 094
Century: 092
Citizen: 090, 092, 097
Contec: 083, 085, 086,

088, 093, 098
Diamond: 093
Eagle: 091

Index

GE: 061, 062
Gemini: 069, 070, 094
General Instruments:

062, 089, 096

18

#01E17-21_46,52,62HM84 5/31/04, 12:20 PM18

Black

(E) 46HM84, 52HM84, 62HM84

Hamlin: 093
Hitachi: 062, 095, 096
Jasco: 097
Jerrold: 062, 069, 071,

082, 086, 089, 091,

096
Magnavox: 072, 096
Memorex: 091, 092, 104
Multi Canal: 090
Novavision: 101
Panasonic: 081, 083, 085
Philco: 087
Philips: 066, 067, 068,

070, 072, 073, 074,

075, 091, 092
Pioneer: 076, 077
Proscan: 061, 062
Radio Shack: 092, 097,

099

RCA: 064, 081
Realistic: 065
Recoton: 102
Samsung: 077, 090
Scientific Atlanta: 063,

078, 079, 080, 088,

098, 101, 105
Sears: 095
Signature: 062
Signature 2000: 096
Sprucer: 081, 085
Starcom: 069, 082, 087,

096, 103, 104
Stargate: 069, 090
Sylvania: 095, 100
TeleView: 090
Texscan: 100
Tocom: 071, 084, 085

U. S. Electronics: 087,

096, 098
United Cable: 082
Universal: 065, 092, 097,

099, 102, 103
Wa rds: 096

Satellite receiver

Alphastar: 038, 059
Chaparral: 034
DISH Network: 057
Drake: 020, 040, 044,

046, 050, 053
Echostar: 018, 041, 051
Express Vu: 057
Fujitsu: 027
GE: 008, 009, 013

General Instruments:

010, 011, 012, 022,

023, 031, 049
Hitachi: 033
Hughes: 033
Hughes Network

Systems: 019
Intersat: 048
Janeil: 027
JVC: 017, 057
Kenwood: 029
Magnavox: 060
Optimus: 058
Pansat: 036, 052
Primestar: 015, 042
Proscan: 008, 009, 013
Radio Shack: 022, 023,

030

Remote control codes (cont.)

Satellite receiver
(cont.)

RCA: 008, 009, 013, 016
Realistic: 030
Samsung: 059
Sony: 014, 055
Star Choice: 057
Star Trak: 025, 026, 037,

054
STS: 024
Toshiba: 000, 001, 002,

003, 004, 005, 006,

007, 020, 031, 056
Uniden: 021, 028, 030,

032, 035, 039, 043,

045, 047, 058
Zenith: 027

TV/VCR Combo

Action: 078
GE: 059, 062
Goldstar: 065
Panasonic: 065
Precision: 078
Quasar: 065
Realistic: 079
Sony: 074
Toshiba: 057
Zenith: 065

DVD/VCR Combo

Go Video:

DVD=087, VCR=081
JVC:

DVD=088, VCR=082
RCA:

DVD=089, VCR=083
Samsung:

DVD=090, VCR=084
Sanyo:

DVD=091, VCR=085
Zenith:

DVD=092, VCR=086

DVD player

Aiwa: 006, 015
Apex: 016, 017
BOSE: 097
Broksonic: 018
Clarion: 019
Classic: 020
Daewoo: 021
Denon: 022, 023, 024,

025
Emerson: 026, 027
Fisher: 028
Funai: 027
GE: 001, 029, 030
Go Video: 087
GPX: 031

Hitachi: 005, 032, 033,

034, 035

JVC: 003, 007, 036,

042, 088
Kenwood: 037
Konka: 008, 009
Magnavox: 004, 038
Memorex: 039
Mintek: 040
NAD: 026
Nakamichi: 041
Norcent: 043
Onkyo: 044
Oritron: 058
Panasonic: 010, 045,

046, 047, 048, 049,

050
Philips: 004, 051
Pioneer: 052, 053, 054,

055
Proscan: 001, 056
Qwestar: 057, 058
RCA: 001, 002, 059, 089
Sampo: 060
Samsung: 061, 062, 086,

090
Sansui: 073
Sanyo: 063, 091
Sharp: 064, 067
Sherwood: 074
Sony: 011, 012, 065,

066, 068, 069, 070
Sylvania: 027
Teac: 071
Technics: 072
Techwood: 075
Toshiba: 000, 013, 076,

077, 078
Yamaha: 079, 080, 081
Zenith: 014, 082, 092

Portable DVD player

Aiwa: 093
Audiovox: 094, 095
Panasonic: 024, 096, 099
RCA: 098

VCR

Admiral: 049
Aiko: 019
Aiwa: 018
Akai: 003, 004, 037,

038, 039, 058, 069
Audiovox: 010
Bell & Howell: 007, 068
Broksonic: 008, 017
Calix: 010
Carver: 026
CCE: 019
Citizen: 009, 010, 011,

012, 013, 014, 015,

019, 057, 073

Colortyme: 005
Craig: 009, 010, 016,

061, 065, 079

Curtis Mathes: 001, 005,

009, 012, 014, 040,
048, 053, 056, 057

Daewoo: 011, 013, 015,

017, 018, 019, 057,

078
Daytron: 078
Denon: 063
Dimensia: 001, 048
Electrohome: 010, 020,

065
Emerson: 003, 008, 010,

011, 017, 018, 020,

028, 039, 054, 057,

062, 065, 068, 072
Fisher: 007, 016, 021,

022, 023, 057, 064,

068, 070, 071, 079
Fuji: 004, 041
Funai: 018, 073
Garrard: 018
GE: 001, 002, 009, 040,

042, 048, 056
Go Video: 056, 059,

061, 081
Goldstar: 005, 010, 014,

054, 056, 065, 067
Gradiente: 018, 065
Harman Kardon: 005
Hitachi: 024, 025, 035,

037, 042, 063, 070,

080
JBL: 076
JC Penney: 005, 006,

007, 008, 009, 010,

023, 024, 025, 026,

035, 056, 061, 063,

065
Jensen: 024, 025, 037,

050
JVC: 005, 006, 007,

014, 037, 043, 050,

062, 063, 068, 082
Kenwood: 005, 006,

007, 012, 014, 037,

043, 050, 053, 068,

071
Kodak: 010
LG: 010
Lloyds: 053, 073, 079
Logik: 061
LXI: 010
Magnasonic: 061, 065,

078
Magnavox: 026, 027,

034, 044, 057, 061,

072
Marantz: 005, 006, 007,

012, 014, 026, 053,

067

Memorex: 007, 009,

010, 016, 018, 034,
049, 063, 065, 066,

068, 075, 079
MGA: 020, 028, 039
MGN: 056
Minolta: 024, 025, 035,

063
Mitsubishi: 020, 024,

025, 028, 039, 043,

065
Montgomery Ward: 049
Motorola: 049
MTC: 009, 046, 061
Multitech: 009, 012, 018
NEC: 005, 006, 007,

012, 014, 037, 043,

053, 054, 067, 070
Nikko: 010
Noblex: 009
Optimus: 010, 049, 065
Optonica: 031
Orion: 054, 057, 062,

065, 068, 072
Panasonic: 036, 045,

046, 057, 061, 072,

079
Pentax: 012, 024, 025,

035, 042, 053, 063
Pentex Research: 014
Philco: 026, 027, 063
Philips: 026, 031, 044,

057
Pioneer: 006, 024, 043,

055
Portland: 012, 013, 015
Proscan: 001, 002, 048
Proton: 061
Quasar: 045
Radio Shack: 010, 031,

065
Radio Shack/Realistic:

007, 009, 010, 016,

018, 020, 021, 022,

031, 049
Radix: 010
RCA: 001, 002, 003,

009, 024, 025, 029,

035, 040, 042, 045,

048, 055, 056, 063,

071, 083
Realistic: 007, 009, 010,

011, 016, 018, 020,

021, 022, 031, 049,

051, 056, 060, 065,

075, 079
Ricoh: 047
Runco: 034
Samsung: 009, 011, 038,

056, 073, 084
Sansui: 006, 037, 043,

061

Sanyo: 007, 009, 016,

054, 064, 068, 071,
075, 079, 085

Scott: 008, 011, 017,

028, 030, 057, 065,
072

Sears: 007, 010, 016,

021, 022, 023, 024,
025, 035, 053, 057,
063, 064, 065, 068,
071, 075, 079

Sharp: 013, 020, 031,

049, 051, 060, 066

Shintom: 004, 025, 032,

061
Signature: 049
Signature 2000: 075
Singer: 047, 061
Sony: 004, 032, 033,

041, 052, 058, 070,

074, 076, 077, 080
STS: 035
Sylvania: 018, 026, 027,

028, 044, 072
Symphonic: 018, 050,

051, 053, 073, 079
Tandy: 007
Tashiko: 010
Tatung: 037
Teac: 018, 029, 037
Technics: 036
Teknika: 010, 018, 065
Toshiba: 000, 011, 021,

023, 024, 028, 030,

039, 057, 074, 078,

079
Totevision: 009, 010,

065
Unitec: 073
Unitech: 009
Vector Research: 005,

006, 011, 012, 053
Video Concepts: 005,

006, 011, 012, 039,

053
Wa rds: 009, 010, 011,

016, 018, 020, 024,

025, 031, 035, 049,

051, 056, 057, 060,

065, 066, 079
White Westinghouse:

073
XR-1000: 018
Yamaha: 005, 006, 007,

014, 037, 053
Zenith: 004, 032, 034,

041, 047, 069, 086

HTIB

Lasonic: 083
Panasonic: 084
Venturer: 085

19

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

Appendix

Index

#01E17-21_46,52,62HM84 5/31/04, 12:20 PM19

Black

(E) 46HM84, 52HM84, 62HM84

Using the remote control to operate a cable
converter box, satellite receiver, VCR, DVD
player, or HTIB (home theater in a box)

Introduction

your TV

Connecting

If you have a non-Toshiba device or a Toshiba device that the remote
control is not preprogrammed to operate, you must first program the
remote control to recognize the device (if you have not already done
so). See pages 18 and 19.

To use your TV remote control to operate a:

• cable converter box or satellite receiver, set the Device Switch to

CBL/SAT.

•VCR, set the Device Switch to VCR.

•DVD player or HTIB, set the Device Switch to DVD.

Point the remote control

directly at the device.

Note:

Even after the TV remote control is
programmed, it may not operate certain
features on your other device. If this happens
and you wish to use those features, you will
need to use the device’s original remote
control.

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

Appendix

Index

TV / VIDEO

+10 (DVD only)

Press to directly access

DVD chapters higher than 10.

P

O

T

TOP MENU (DVD only)

Accesses a DVD’s top menu.

ENTER

Required by some VCRs and cable

converter boxes to change the channel.

E

N

T

Device Switch

Set to “TV” to control the TV; “CBL/SAT” to

control a cable converter box or satellite

receiver; “VCR” to control a VCR; “DVD”

TV
CBL/SAT
VCR
DVD

to control a DVD player or HTIB.

PAU SE

Press during play or record mode to

pause the picture; press again to restart.

TV/VCR PAUSE

TV/VCR (VCR only)

To view one program while recording

another, press to select TV mode.

REW

CH SCAN

REC

Rewinds the tape or DVD. (Press during play mode

to view the picture moving rapidly backward.)

REC (VCR only)

Starts tape recording.

FF

Fast-forwards the tape or DVD.

(Press during play mode to view the

picture moving rapidly forward.)

RECALL

POWER

INFO

123

456

7

100

N

E

M

FAVORITE

ENTER

E

R

89

0

FAV

MENU

CHRTN

ENT

PIC

VOLCH

STOP

SKIP / SEARCH

+10

U

DVDMENU

FAV

POP DIRECT CH MUTE SLEEP

FREEZE SOURCE

FFREW

SWAP POP CH

CT-90159

G

U

S

I

ZE

EXIT

C

PLAY

SPLIT

LIGHT

POWER

Tu r ns the selected device on and off.

INFO (CBL/SAT only)

Displays on-screen information.

Channel Numbers (0-9)

Press to directly access channels (as
opposed to CH y z).

I

D

E

GUIDE (CBL/SAT only)

Displays channel guide.

y z x • (DVD only)
Press to navigate DVD menus (may not
work on some DVD players).

L

Press to reset the title and chapter

CLEAR (DVD only)

R

A

E

number.

CH y z
y selects the next higher channel;
z selects the next lower channel.

PLAY

Begins playback of a tape or DVD.

STOP

Stops the tape or DVD.

SKIP/SEARCH

(DVD only)

Skips forward to locate later DVD
chapters.

SKIP/SEARCH (DVD only)

Skips back to beginning of current DVD
chapter or locates previous chapters.

20

#01E17-21_46,52,62HM84 5/31/04, 12:20 PM20

Black

(E) 46HM84, 52HM84, 62HM84

Learning about the remote control

The buttons used for operating the TV only are described here.

POWER turns the TV on and off.

Press POWER to turn the TV on. The Red LED indicator will
be illuminated.
Press POWER again to turn the TV off.

Note:

If the Quick Restart feature is in ON mode, it can take up to several seconds for
the picture to appear. See page 25 for details.

RECALL displays screen information (page 55)

SLEEP sets the TV to turn off at a specific time (page 49)

TV/VIDEO selects video input source (page 47)

MUTE mutes the sound (page 51)

Device Switch

switches between TV, CBL/SAT, VCR, and DVD (Pages 18-20)
Set to “TV” to control the TV.

CH (channel) y z cycles through programmed channels (page 25)

Channel Numbers (0-9, 100) allow direct access to channels (page 25)

VOL (volume) y z adjusts the volume level

CH RTN returns to the memorized channel (page 26)

MENU allows access to on-screen programming menus (page 22)

ENTER activates the function settings in the menu (page 22)

y z x • select or adjust programming menus (page 22)

POP CH y z

FAV y z cycles through favorite channels (page 27)

selects the POP (picture-out-picture) channel (page 33)

TV / VIDEO

RECALL

INFO

123

456

7

100

N

E

M

P

O

T

FAVORITE

ENTER

E

N

T

E

R

TV
CBL/SAT
VCR
DVD

TV/VCR PAUSE

CH SCAN

REC

89

+10

0

U

FAV

MENU

DVDMENU

FAV

VOLCH

POP DIRECT CH MUTE SLEEP

STOP

FREEZE SOURCE

FFREW

SKIP / SEARCH

SWAP POP CH

POWER

CHRTN

ENT

G

PIC SIZE

EXIT

PLAY

SPLIT

LIGHT

Introduction

your TV

Connecting

U

I

D

E

Using the

R

A

E

L

C

Remote Control

your TV

Setting up

FAVORITE allows access to the favorite channel search function (page

36)

PIC SIZE cycles through the five picture sizes: Natural, Theater Wide

1, 2, 3, and Full (page 29)

EXIT exits programming menus (page 22)

SPLIT turns the POP feature on and off (page 33)

SOURCE selects the POP picture source (page 33)

FREEZE freezes the picture. Press again to restore the picture.

SWAP switches the main and POP pictures (page 34)

POP DIRECT CH allows direct access to POP channels (page 33)

CH SCAN

LIGHT illuminates the keypad for five seconds

allows access to the programmed channel search function (page 35)

CT-90159

Note:

The error message “Not Available” will appear
if you press a key for a function that is not
available.

Features

Using the TV’s

Appendix

Index

21

#01E17-21_46,52,62HM84 5/31/04, 12:20 PM21

Black

(E) 46HM84, 52HM84, 62HM84