Toshiba CS3330BLI, CS3330BI User Manual

6 7

CCD M o n o c h r o m e

Vi d e o C a m e r a

CS3330Bi

S E R I E S

CS3330Bi CS3330BLi

Sp e c i f i c a t i o n

CO N TE N TS

Before use – General safety instructions

1. PRODUCT DESCRIPTION

2. FE ATURE S ...................................................................................................

3. CONSTITUTION...........................................................................................

4. SPECIFICATIONS

4-1 Mechanical specifications

4-2 Electrical specifications

………

............................................................................

................................................................................

..................................................................

5.APPEARANCES

5-1 Appearance of the camera head

5-2 Appearance of the camera head with mount metal fitting

5-3 Appearance of the camera control unit for CCD camera (CS3330Bi)…….…

5-4 Appearance of the camera control unit for CCD camera (CS3330BLi)……...

This specification subjects to change without notice.

..................................................................

..............................

D4134992A

BEFORE USE - GENERAL SAFETY INSTRUCTIONS

This instruction manual contains important information for the operator (user) and/or people in the vicinity to avoid personal injury, or property damage.

• Prior to use, read this operation manual carefully to fully understand its instructions for correct use.

• After reading, keep this manual near the equipment for future reference.

WARNINGS & CAUTIONS

[Definition of markings] The meaning of each mark used in this instruction manual is given below.

WARNING

CAUTION

Notes *1: Personal injury means wounds, burns, electric shocks, and others for which

hospitalization or long term care are not required.

*2: Material damage means any direct or consequential damage related to property or material loss.

This mark warns the user that improper use may cause death or severe personal injury of the user or people in the vicinity.

This mark warns the user that improper use may cause personal injuries (*1) or material damages (*2) against the user or people in the vicinity.

This mark indicates what the user SHOULD NOT DO. The details are given adjacent the mark.

This mark indicates what the user MUST DO. The details are given adjacent the mark.

This specification subjects to change without notice.

D4134992A

●Handling Precautions

WARNING

unplug

Do not get wet

Never pull apart

Avoid

 Immediately cease use of the equipment in the event of abnormality or malfunction.

If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign matter, or if the equipment is dropped or malfunctions, fire or electric shock may result. If such abnormalities occur, disconnect the power plug from the outlet and contact your sales representative.

 Do not use the equipment in locations subject to water splashes.

Otherwise, fire or electric shock may result.

 Do not disassemble, repair, or modify the equipment.

Otherwise, fire or electric shock may result. For internal repair, inspection, or cleaning, contact your sales representative.

 Do not place anything on the equipment.

If metallic objects, liquid, or other foreign matter enters the equipment, fire or electric shock may result.

 Do not install the equipment in an unstable or inclined location or locations subject to

vibration or impact.

Otherwise, the equipment may topple over and cause personal injury.

Do not touch

Instruction

Avoid

 During an electrical storm, do not touch the power cord or connection cable.

Otherwise, an electric shock may result.

 Use the specified power supply.

Use of an unspecified power supply may result in fire or electric shock.

 Do not be handled roughly, damaged, fabricated, bent forcefully, pulled, twisted, bundled,

places under heavy objects or heated the power cord, connection cable.

Otherwise, fire or electric shock may result.

This specification subjects to change without notice.

D4134992A

CAUTION

Instruction

Avoid

 Observe the following when installing the equipment:

· Do not cover the equipment with a cloth, etc.

· Do not place the equipment in a narrow location where heat is likely to accumulate. Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire.

 Do not place the equipment in locations subject to high moisture, oil fumes, steam, or

dust.

Otherwise, fire or electric shock may result.

 Do not install the equipment in locations exposed to direct sunlight or humidity.

Otherwise, the internal temperature of the equipment will rise, which may cause a fire.

 Use only specified AC power cables and connection cables.

Otherwise, fire or electric shock may result.

 When performing connection, turn off power.

When connecting the power cable or connection cable, turn off the equipment power. Otherwise, fire or electric shock may result.

Avoid

Instruction

 Do not expose its camera head to any intensive light (such as direct sunlight).

Otherwise, its inner image pickup devise might get damaged.

 Avoid short-circuiting signal output.

Otherwise, a malfunction may occur.

 Avoid giving a strong shock against the camera body.

If your camera is used in a system where its camera connector is subjected to strong repetitive shocks, its camera connector is possible to break down. If you intend to use your camera in such a situation, if possible, bundle and fix a camera cable in the place near the camera, and do not transmit a shock to the camera connector.

 Contact your sales representative to request periodic inspection and cleaning (every

approx. five years).

Accumulation of dust inside the equipment may result in fire or electric shock. For inspection and cleaning costs, contact your sales representative.

This specification subjects to change without notice.

D4134992A

CASES FOR INDEMNITY (LIMITED WARRANTY)

Should the equipment be used in the following conditions or environments, give consideration to safety

We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the

user in the following cases.

 In the case damage or losses are caused by fire, earthquake, or other acts of God, acts by a third party,

deliberate or accidental misuse by the user, or use under extreme operating conditions.

 In the case of indirect, additional, consequential damages (loss of business interests, suspension of business

activities) are incurred as result of malfunction or non-function of the equipment, we shall be exempted from

responsibility for such damages.

 In the case damage or losses are caused by failure to observe the information contained in the instructions in

this instruction manual and specifications.

 In the case damage or losses are caused by use contrary to the instructions in this instruction manual and

specifications.

 In the case damage or losses are caused by malfunction or other problems resulting from use of equipment or

software that is not specified.

 In the case damage or losses are caused by repair or modification conducted by the customer or any

unauthorized third party (such as an unauthorized service representative).

 Expenses we bear on this product shall be limited to the individual price of the product.

 About the item which does not have a publication in the specifications and manual of this product, it

considers as the outside for a guarantee.

RESTRICTION FOR USE



measures and inform us of such usage:

1. Use of the equipment in the conditions or environment contrary to those specified, or use outdoors.

2. Use of the equipment in applications expected to cause potential hazard to people or property, which

require special safety measures to be adopted.

 This product can be used under diverse operating conditions. Determination of applicability of equipment or

devices concerned shall be determined after analysis or testing as necessary by the designer of such

equipment or devices, or personnel related to the specifications. Such designer or personnel shall assure the

performance and safety of the equipment or devices.

 This product is not designed or manufactured to be used for control of equipment directly concerned with

human life (*1) or equipment relating to maintenance of public services/functions involving factors of safety

(*2). Therefore, the product shall not be used for such applications.

(*1): Equipment directly concerned with human life refers to:

· Medical equipment such as life-support systems, equipment for operating theaters.

· Exhaust control equipment for exhaust gases such as toxic fumes or smoke.

· Equipment mandatory to be installed by various laws and regulations such as the Fire Act or

Building Standard Law

· Equipment related to the above

(*2) Equipment relating to maintenance of public services/functions involving factors of safety refers to:

· Traffic control systems for air transportation, railways, roads, or marine transportation

· Equipment for nuclear power generation

· Equipment related to the above

This specification subjects to change without notice.

D4134992A

+ 9 hidden pages