Toshiba 32ZD26P, 36ZD26P User Manual

owner’s manual
colour television
TOSHIBA
32ZD26P 36ZD26P
2
Contents
CONNECTING OTHER EQUIPMENT
ADDITIONAL FEATURES
TELETEXT
USING YOUR TV
FOR YOUR GUIDANCE
OTHER INFORMATION
For your safety – Some do’s and don’ts for you to be aware of 3 Your new television’s remote control – an at-a-glance guide 4 Connecting and turning on your new TV 5 Choosing the language and system, Auto tuning 6 Manually tuning your TV – an alternative to Auto tuning 7 Sorting programme positions 8 Manual fine tuning, programme skip 9
General controls – changing programme position 10 Sound controls – volume, sound mute, bass boost, bass/treble/balance 10 Widescreen viewing 11 Picture controls – picture size/position, automatic format (widescreen), geomagnetic adjustment,
still picture 12
Picture controls – picture preferences, scan mode, digital noise reduction (DNR), black stretch 13
The timer and time display – informing the TV to turn on/off and time display 14 Panel lock – disabling the buttons on the side of the TV 14 Stereo and bilingual transmissions – stereo or dual language broadcasts 14 AV connections and input selection – input and output sockets for connected equipment 15
Setting up 16 Auto and List modes 17 Control buttons 18
Side connections and controls
19
Back connections
20
The Menus – a display of the main on-screen menus for your reference 21 Questions and Answers
22
Index, Specifications and Accessories – information on your television 24
?
For television
operation queries,
please ring the
helpline…
3
For your safety
SETTING UP
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points below for your own safety. They are of a general nature, intended to help you with all your electronic consumer products and some points may not apply to the goods you have just purchased.
DON'T remove any fixed cover as this may expose dangerous voltages.
DON'T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.
DON'T allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.
DON’T place hot objects or naked flame sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.
DON'T use makeshift stands and NEVER fix legs with wood screws. To ensure complete safety, always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.
DON'T listen to headphones at high volume, as such use can permanently damage your hearing.
DON'T leave equipment switched on when it is unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure your family know how to do this. Special arrangements may need to be made for infirm or handicapped people.
DON'T continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.
ABOVE ALL – NEVER let anyone, especially children, push anything into holes, slots or any other openings in the case – this could result in a fatal electric shock.
NEVER guess or take chances with electrical equipment of any kind – it is better to be safe than sorry.
Leave at least 10cm clearance around the television to allow adequate ventilation. This will prevent the TV from overheating and consequential possible damage to the TV. Dusty places should also be avoided.
Damage may occur if you leave the TV in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity, or locations where the temperature is likely to fall below 5°C (41°F).
The mains supply required for this equipment is 230v AC 50Hz. Never connect to a DC supply or any other power source. DO ensure that the TV is not standing on the mains lead. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance. In the UK, the fuse fitted in this plug is 13A, and is approved by ASTA or BSI to BS1362. It should only be replaced by a correctly rated and approved type and the fuse cover must be refitted. IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN.
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
Air Circulation… Do not…
Heat Damage…
Mains Supply…
Do…
4
SETTING UP
Your new television’s remote control
Remove the back cover to reveal the battery compartment and make sure you insert the batteries the right way round.
Suitable battery types for this remote are R03 or AAA.
Do not throw your old batteries into a fire, dispose of them in a designated disposal area. Do not combine a used, old battery with a new one or mix battery types.
The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the TV.
The batteries... and the effective range of the remote…
Simple, at-a-glance reference of your remote control’s buttons…
For quick reference
to topics, please see
the
INDEX
at the end of
this manual.
To mute the sound
Teletext control buttons
SETTING UP
5
Connecting and turning on your new TV
…and switching your new TV on…
WE RECOMMEND THAT YOU USE SCART LEADS IN ADDITION TO AERIAL CABLES WHEREVER POSSIBLE
Aerial cables:
Connect the aerial to the socket on the rear of the television. If you use a decoder* and/or a video recorder it is essential that the aerial cable is connected through the decoder and/or through the video recorder to the television.
Scart leads:
Connect the video recorder IN/OUT socket to the TV. Connect the decoder TV socket to the TV. Connect the video recorder SAT socket to the decoder VCR socket.
Before running Auto tuning put your decoder and video recorder to Standby.
The TV back connections…
Before connecting any external equipment, turn off all main power switches.
IN
OUT
IN
OUT
the back of your TV
video recorder
decoder*
*
a decoder could be:
Digital Satellite, Analogue
Satellite, or any other
compatible decoder.
SATIN/OUT
VCR
TV
We recommend Scart 1
for a decoder, Scart 2 for
a VCR and Scart 3 for
additional equipment.
GREEN = On Timer is set
…and with the remote control:
Press the Standby Buttoni:
This allows you to put the set into standby mode when leaving the TV unattended for short periods of time. To return to TV mode press the
i
button, or any of the numbered buttons on the remote control. The picture may take a few seconds to appear.
SCART 1
SCART 2
SCART 3
6
Choosing the language and system*,
Auto tuning
SETTING UP
Before running Auto tuning put your decoder and video recorder to Standby.
3
4
2
Set up

Language ENGLISH Colour
AUTO Auto tuning
Manual tuning Programme sorting Teletext NexTView set up
Set up
1
To choose your language, press the MENU button, and use the Rbutton to select Set up from the top bar.
Now press the Q button to highlight Language in the Set up menu options.
Press the SorRbutton to view the language options available. As you view each language, the wording on the menus will automatically change for you.
Now press the Q button to highlight Auto
tuning.
EXIT : To exit
Previous settings
will be lost!
EXIT for no change.
System I
START
Auto tuning
Press the Rbutton repeatedly to select your
System*. With the Q button highlight START and
then press the Rbutton.
The search will begin for all available stations.
xx xx xx xx xx
will flash and the bullet will move along
the line as the search progresses.
Allow the television to complete the search.
B/G – Continental Europe,
D/K – Eastern Europe,
I – UK,
L1, L 2
– France
Searching
Channel : 21 Station :
Auto tuning

EXIT :To exit
8
7
9
6
When the search is complete the TV will automatically return to programme position 1. This may not be a clear picture, so you may wish to change the station order, using Programme
sorting, on page 8.
If you cannot connect your television to the decoder or video recorder using Scart leads, you will need to allocate a programme position on the television for each, use Manual tuning, see page 7.
*
*
For Continental Europe only.
For UK only: Press
OK to start and go to step 8.
For Continental Europe: You will need to choose the System* necessary for where you live.
OK : To store EXIT : To exit
MENU : To return
System
0 I 60 0 VCR
Manual tuning
Press OK to select.
Press the Rbutton to select System and use Por Q to change (if required, see page 6).
Press the Rbutton to select Search.
7
SETTING UP
Manual tuning
Manually tuning your TV
As an alternative to Auto tuning, you can tune-in your Toshiba television manually using Manual tuning. For example: if you have used Auto tuning but wish to tune-in a station on another System (see page 6) or if you are unable to connect the TV to your video/decoder with a Scart lead.
Station
Programme: The number to be pressed on the remote control.
System: Specific to certain areas. See page 6.
Search: Search up and down for a signal.
Programme skip:*means nothing has been stored or the facility
to skip the channel is ON. See page 9.
Channel: The channel number on which a station is being broadcast.
Manual fine tuning: Only used if you experience interference/weak signal.
See page 9.
Station: Station identification. You can use the
P
and Qor Sand
R
buttons to enter up to seven characters.
Programme System Search
Programme skip/
Channel
Manual fine
tuning
2
3
4
5
OK : To select EXIT : To exit
Manual tuning
Prog. Sys. Channel Station
0 I 60 VCR
1 I 22 BBC1 2 I 28 BBC2 3 I 25 ITV 4 I 32 CH4 5 I * 69
Using the
P
or Q button, highlight the
programme position you require e.g. we suggest
Prog. 0 for your video.
1
From the top menu bar select Set up and with the Q button highlight Manual tuning and the
R
button to select.
…Your TV
may display
different
Channel
numbers…
Continues on the next page
If you CANNOT connect your television to the
decoder or video recorder using Scart leads: You
will need to allocate a programme position on
the television for each. Turn the decoder on to a
free channel, i.e. a channel you have not had to
pay for, insert a pre-recorded tape in the video
and press PLAY, then Manual tune…
!
These options will appear as you move across the screen.
Set up


Language
ENGLISH
Colour
AUTO
Auto tuning
Manual tuning
Programme sorting Teletext
On finding a signal it will show on the television, if it is not your video recorder, press the Pbutton again to restart the search.
When the signal from your video recorder is found, press the Rbutton to move along to
Station. With the
P
, Q,
S
and Rbuttons, put in
the required characters, e.g. VCR.
Now press OK to store.
Repeat for each programme position you want to tune, e.g. to tune your decoder to Programme Position 6 press the
P
or Q
button repeatedly to select 6 then repeat from step 4. Or, press MENU to return to the list of channels and select the next number to tune.
Press EXIT when you have finished tuning in.
SETTING UP
8
Manually tuning your TV continued
Sorting programme positions
6
7
8
10
9
This TV has direct channel entry if the channel numbers are known.
Select the Manual tuning screen in Step 3. Enter the Programme number, the System, then the
Channel number. Press OK to store.
P
LEASE NOTE
Press the Pbutton to begin the search. Searching will flash and the television will show the channel numbers whilst the search is progressing.
OK : To store EXIT : To exit
MENU : To return
OK : To store EXIT : To exit
MENU : To return
Manual tuning
11
5
6
Press the MENU button and then theSorRbutton to select the Set up option from the top bar.
Press Q to highlight Programme sorting and
R
to select.
The list of stations is now showing. With the
Q or
P
button highlight the station you want to
move and press OKto select.
As you do so the selected station will be moved to the right of the screen.
To sort programme positions
1
2
3
4
Set up
OK : To set EXIT : To exit
Programme sorting
Prog. Channel Station
1 22 BBC1 2 28 BBC2 3 25 ITV 4 32 CH4 5* 69 6* 69
Use the Q or
P
button to move through the list to your preferred position. As you do so the other stations will move to make room.
Now press the OK button to set your move.
Repeat as necessary and then press EXIT.
Searching
0I
RRR
32 0
Manual tuning
Loading...
+ 16 hidden pages