Toshiba 32L2400U, 40L2400U, 50L2400U User Manual

QUICK START
32/40/50L2400U (United States model) 32/40/50L2400UC (Canada model) 32/40/50L2400UM (Mexico model)
Unpack the box
1. Remove the components and TV from the box. Save the packing materials in case you need them later.
2. Remove the documentation for important information.
Notice
Subject to Change. Product specifications, configurations, prices,
system/component/options availability are all subject to change without notice.
The Resource Guide contains important safety precautions not included in this document. Please review completely prior to using this product. Complete instructions are contained in the User's Guide located on Toshiba's web site at : For United States: support.toshiba.com For Canada: www.toshiba.ca/support/ceg For Mexico: http://www.toshiba.com.mx/tdmConsumo/Informacion/Contacto.aspx?ID=SPT"
A High-Definition signal is needed to receive a High-Definition picture. Once you have a High-Definition signal you need to connect it to a High-Definition input on your TV. Not all channels are currently broadcasting in HD. Standard analog TV channels and HD channels, even on the same network, broadcast on different channels. (Example: ABC analog may be on channel 4, while ABC-HD may be on channel 104.)
Pedestal Assembly Instructions
To prevent possible electric shock, protect the power cord from being pinched when attaching the pedestal stand.
Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.
For safety information, please review the User’s Guide online: For United States: support.toshiba.com For Canada: www.toshiba.ca/support/ceg For Mexico: http://www.toshiba.com.mx/tdmConsumo/Informacion/Contacto.aspx?ID=SPT"
32L2400U/UC/UM
C
x 1 (32L2400U/UC/UM)
32L2400U/UC/UM model
B
32L2400U/UC/UM32L2400U/UC/UM
x 1 (32L2400U/UC/UM)
A
M4 ; L12mm
x 4 (32L2400U/UC/UM)
L2400U/UC/UM Series
Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble pedestal as indicated below.
Two people are required for installation to avoid injury or damage to the TV.
32L2400U/UC/UM
D
M5 ; L14mm
x 2 (32L2400U/UC/UM)
D
Check the components
Your TV comes with:
• Remote control and batteries
• Several documents, including the Resource
Guide, and Standard Liminted Warranty.
• Pedestal stand and hardware
• All other cables and adapters are sold
separately.
• If any items are missing or damaged, notify
• For the United States, the Standard Limited Warranty is located at
support.toshiba.com/warranty.
• For Canada, the terms and conditions of the Limited One (1) Year Warranty on Parts and Labour can be found at www.toshiba.ca/support Click on Televisions, Select Warranty, then Select Standard Warranty & Service Plans and Select Flat Panel Television (bilingual)
Choosing a location for your LED TV
To display your TV on the included Pedestal Stand:
Observe the following safety precautions:
1. Read and follow the pedestal assembly instructions section in this document Before beginning pedestal assembly, carefully lay the TV facedown on a
Extreme care should always be used when attaching or removing the pedestal
2. Assemble the pedestal stand with the hardware provided.
3. After assembling the pedestal, place the TV on a sturdy, level surface that can support the weight of the TV.
4. Be sure to secure the TV to a wall stud, pillar, surface, or other immovable structure.
flat, cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble the pedestal as indicated below.
stand to avoid damage to the display panel.
Always place the TV on a sturdy, level, stable surface that can support the weight of the unit. Secure the TV using one of the following methods:
(1) Secure the TV with a mounting screw (Recommended).
• Place the TV on a sturdy surface that has a sufficient thickness and screw the unit on the surface securely by using the mounting screw and the fall-prevention screw hole.
• If secured to furniture or other movable objects, the furniture must be secured to an immovable structure using the method shown in item 2 below.
(2) Secure the TV with a sturdy strap to a wall stud, pillar, or other immovable structure. When connecting the strap:
- attach the strap to the TV using the hooks on the back of the TV, the clips on the pedestal, or the hole in the base of the pedestal as available.
- make sure the strap is tight, secure, and parallel to the floor.
32” TV
VESA Mounting Pattern
Two stand screws
(Sample illustration)
Hook Sturdy strap
(as short as possible)
40” TV
VESA Mounting Pattern
Two stand screws
(Sample illustration)
Hook Sturdy strap (as short as possible)
Get detailed product information:
L2400U series: A comprehensive User's Guide for your model is available at support.toshiba.com, as well as up-to-date product information. L2400UC series: For up-to-date product information, visit www.toshiba.ca/support/ceg For detailed product specifications, Select Product, then select Model and select Model Number. L2400UM series: A comprehensive User's Guide for your model is available at
http://www.toshiba.com.mx/tdmConsumo/Informacion/Co ntacto.aspx?ID=SPT"
To display your TV using a Wall Bracket:
Be sure to remove the pedestal stand before mounting your TV with a wall bracket. Always use a wall bracket Listed by an independent laboratory (such as UL, CSA, ETL) that is appropriate for the size and weight of the TV:
Two people are required for installation to avoid injury or damage to the TV.
1. Unplug and remove any cables and/or other component connectors from the rear of the TV.
2. Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.
Always use the screws supplied or recommended by the wall mount manufacturer.
VESA Mounting Pattern
TV Size Hole Pattern (H x V) Screw Size
32" 200mm x 200mm M6 40" 200mm x 200mm M6 50" 400mm x 200mm M8
50” TV
VESA Mounting Pattern
Two stand screws
(Sample illustration)
Hook Sturdy strap (as short as possible)
B
50L2400U/UC/UM
M5 ; L10mm
x 4 (50L2400U/UC/UM)
40’ E
50’ F
40/50L2400U/UC/UM
x 1 (40/50L2400U/UC/UM)LEFT
40” 50”
40/50L2400U/UC/UM model
C
A
40/50L2400U/UC/UM
B
RIGHT x 1 (40/50L2400U/UC/UM)
40” 50”
B
B
40/50L2400U/UC/UM
C
x 1 (40/50L2400U/UC/UM)
D
40’
40/50L2400U/UC/UM
D
x 4 (40/50L2400U/UC/UM)
D
50’
M4 ; L8mm
40L2400U/UC/UM
E
x 4 (40L2400U/UC/UM)
F
M4 ; L12mm
Register Your Toshiba Television
Enhance your ownership experience by taking a few minutes to register your Toshiba product at register.toshiba.com (for L2400U and L2400UM series) or support.toshiba.ca/warranty/ (for L2400UC series). Completing product registration allows Toshiba to
provide you with product information updates, special offers and promotions. Failure to complete product registration will not diminish your rights under the Standard Limited Warranty.
If you are experiencing a technical problem or have questions regarding operation, authorized service centers, warranty or parts, please contact our Customer Support Center at:
For L2400U series (United States model):
(800) 631-3811 From Inside the United States (949) 583-3050 From Outside the United States
For L2400UC series (Canada model):
1-800-268-3404 From within Canada
For L2400UM series (Mexico model):
9126-5165 and 9126-5166 for Mexico 01-800-712-67-64 lada 800 for Mexico
Many questions regarding parts, service, and warranties can be answered by visiting the Customer Support Section of our website:
L2400U series: support.toshiba.com L2400UC series: www.toshiba.ca/support/ceg L2400UM series: http://www.toshiba.com.mx/tdmConsumo/Informacion/Contacto.aspx?ID=SPT"
THANK YOU
Receiving an HDTV Signal
Quick Tour
There are three basic ways to receive an HDTV signal on your new TV:
1. Over-the-Air (Antenna)
Connect a high quality outside antenna (not
supplied) directly to the antenna input on the TV (reception cannot be guaranteed and is based on proximity to the local signal).
2. Cable or Phone Company HDTV Service Cable or phone company HDTV service customers
will need to subscribe to High-Definition service from
your local provider. (Additional monthly subscription cost may apply).
3. Satellite Satellite customers will need a High-Definition
satellite receiver and appropriate dish hardware.
(Additional monthly subscription cost may apply).
Connecting to a High-Definition Input on your TV
You can connect directly from an antenna, or if you are using an HD cable box or HD satellite box, there are three standard connections that can be used to receive an HD signal.
1. Antenna Input
To connect directly from an antenna or basic cable: connect the cable directly to the antenna input on the back of the TV.
INPUT
TV
2. HDMI® to HDMI®
HDMI® is the best connection for HDTV. This is a digital connection that carries both digital video and digital audio.
OUTPUT
Cable box/Satellite box
INPUT
TV
3. DVI to HDMI® Your HD cable box or HD satellite receiver
may have a DVI connection. This will be connected to the HDMI® jack on the TV using an HDMI® cable and an HDMI® to DVI converter. DVI carries digital video only.
OUTPUT
Cable box/Satellite box
INPUT
TV
4. Component Video Input
ColorStream
TM
HD component may also be used to receive HDTV. Use if no HDMI® or DVI jack is available. There are three jacks color-coded with red-green-blue on the back of the TV and HD cable box or HD satellite receiver. This connection will require a separate analog audio
connection (use the red and white audio connections).
OUTPUT
Cable box/Satellite box
INPUT
TV
Front
Back
32L2400U/UC/UM Series
32L2400U/UC/UM Series
Remote sensor
Power On/Standby LED
Back
40L2400U/UC/UM Series
Power Cord
Front
40/50L2400U/UC/UM Series
Back
Power Cord
Remote sensor
Power On/Standby LED
50L2400U/UC/UM Series
Initial Setup
You must select a Language, either Home/Store mode, before you can exit out of the Setup Menu. The EXIT button will not function until these selections have
been made.
1. Menu Language
Select a language.
Initial Setup
Menu Language
Time Zone
English
Eastern
5. Start Scan Select Start Scan.
2. Time Zone
Select a time zone
Press ENTER.
Initial Setup
Menu Language
Time Zone
English
Eastern
If you want to stop scanning, press EXIT while scanning.
3. Store / Home Mode Select Store or Home Mode.
Press ENTER.
Store / Home Mode
To use this TV for display in a store showroom, please select [ Store ]. [ Home ] mode is recommended for normal use.
Home
4. ANT/CABLE in
Select Antenna or Cable. Press ENTER.
ANT / CABLE in
Antenna
Press ENTER.
Channel Program
Press EXIT for no change.
Start Scan
Navigating the menu system
Picture
Sound
Options
Installation
Timers
Get Help
Picture
Picture Mode Standard
Reset
Backlight 55
Contrast 95
Brightness 0
Color 0
Tint 0
Sharpness 0
Advanced Picture Setting
Display Setting
(Sample Image)
You can use the buttons on the remote control to access and navigate your TV’s onscreen menu system.
• Press MENU to open the menu system.
• When a menu is opened, use the arrow buttons ( )
on the remote control, to move in the corresponding direction in the menu.
• Press ENTER to save your menu settings or select a
highlighted item. (A highlighted menu item appears in a different color in the menu).
• All menus close automatically if you do not make a
selection within 60 seconds.
• To close a menu instantly, press EXIT.
Left side
For more information about the CH/INPUT button, refer to the User's Guide.
Need Help?
Consult the electronic User's Guide
L2400U series: To access the electronic User’s Guide please visit support.toshiba.com Type in your product model or serial number, press GO, and then click Manuals & Specs. L2400UC series: To access the electronic User’s Guide please visit www.toshiba.ca/support/ceg L2400UM series: To access the electronic User's Guide please visit
http://www.toshiba.com.mx/tdmConsumo/Informacion/Contacto. aspx?ID=SPT"
Visit Toshiba's Support Web site
L2400U series: support.toshiba.com L2400UC series: www.toshiba.ca/support/ceg L2400UM ser ies: http://www.toshiba.com.mx/ tdmConsumo/Informacion/Contacto.aspx?ID=SPT"
32L2400U/UC/UM Series
POWER button
Channel/ Volume increase/ decrease
Switches the function of the VOL +/- buttons to select the volume, channel, or input mode.
USB port
Most problems are easy to correct. Save time with one of these simple solutions
Left side
40L2400U/UC/UM Series
POWER
Volume increase/
Switches the function of the VOL +/- buttons
to select the volume,
channel, or input mode.
Left side
button
Channel/
decrease
USB port
50L2400U/UC/UM Series
Call Toshiba Customer Support Center
If you are experiencing a technical problem or have questions with regards to operation, authorized service centers, warranty or parts, Toshiba Customer Support Center is ready to help.
L2400U series: (800) 631-3811 From inside the United States
L2400UC series: L2400UM series:
ColorStream is a trademark of Toshiba America Information Systems, Inc. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. All other brand and product names are trademarks or registered trademarks of their respective companies.
Printed on recycled paper
(949) 583-3050 From outside the United States
1-800-268-3404 From within Canada 9126-5165 and 9126-5166 For Mexico 01-800-712-67-64 lada 800 For Mexico
©2013 Toshiba America Information Systems, Inc.
• GMA501285010 • 12/13
Loading...