Toshiba 32HF72 User Manual

OWNER'S MANUAL

Color Television

Introduction

your TV

Connecting

Using the

Remote Control

32HF72 36HF72

Setting up

Using the TV’s

Owner's Record

Appendix

The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.

Model:

Serial No.:

23565661

Index

your TV

Features

Dear Customer,

Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV.

Before operating the TV, please read this manual completely, and keep it nearby for future reference.

Child Safety

It Makes A Difference Where Your TV Stands

Safety Precautions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. DO NOT TRY TO SERVICE THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you that important operating and maintenance instructions follow this symbol.

NOTE TO CATV INSTALLERS IN THE USA

This is a reminder to call the CATV system installer’s attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see items 24 and 25 on page 4.

NOTICE OF POSSIBLE TV STAND INSTABILITY

DANG ER: RISK OF SERIOUS PERSONAL INJURY OR DEATH!

the TOSHIBA TV stand recommended in the “Specifications” section only. result in instability, causing possible injury or death.

NOTICE OF POSSIBLE ADVERSE EFFECTS

ON TV PICTURE TUBE

If a fixed (non-moving) pattern remains on the TV screen for long periods of time, the image can become permanently engrained in the picture tube. This type of

damage is NOT COVERED BY YOUR WARRANTY.

See item 32 on page 4.

Use this TV with

Use with other stands may

Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:

The Issue

 If you are like most Americans, you have a TV in your home.

Many homes, in fact, have more than one TV.

 The home theater entertainment experience is a growing

trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands.

 Sometimes TVs are improperly secured or inappropriately

situated on dressers, bookcases, shelves, desks, audio speakers, chests, or carts. As a result, TVs may fall over, causing unnecessary injury.

Toshiba Cares!

 The consumer electronics industry

is committed to making home

entertainment enjoyable and safe.

 The Consumer Electronics

Association formed the Home

Entertainment Support Safety

Committee, comprised of TV and consumer electronics furniture

manufacturers, to advocate

children’s safety and educate

consumers and their families about

television safety.

Tune Into Safety

 One size does NOT fit all! Use appropriate

furniture large enough to support the weight of your

TV (and other electronic components).

 Use appropriate angle braces, straps, and anchors to secure

your furniture to the wall (but never screw anything directly into the TV).

 Carefully read and understand the other enclosed

instructions for proper use of this product.

 Do not allow children to climb on or play with furniture

and TVs.

 Avoid placing any item on top of your TV (such as a VCR,

remote control, or toy) that a curious child may reach for.

 Remember that children can become excited while watching

a program and can potentially push or pull a TV over.

 Share our safety message about this hidden hazard of

home with your family and friends. Thank you!

2500 Wilson Blvd. Arlington, VA 22201 U.S.A. Tel. 703-907-7600 Fax 703-907-7690 www.CE.org

CEA is the Sponsor, Producer and

05/02.2

Manager of the International CES

the

Important Safety Instructions

QUALIFIED

SERVICE

TECHNICIAN

Installation, Care, and Service

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

CAUTION: To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.

Wide plug

Installation

Follow these recommendations and precautions and heed all warnings when installing your TV:

15) Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal Communications Commission.

16) DANG ER: RISK OF SERIOUS PERSONAL

INJURY, DEATH, OR EQUIPMENT DAMAGE! Never place the TV on

an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

17) Never place or store the TV in direct sunlight; hot, humid areas; areas subject to excessive dust or vibration; or locations with temperatures at or below 41°F (5°C).

18) Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit.

19) Never place items such as vases, aquariums, or candles on top of the TV.

10) Protect the power cord from being

walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during

lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

20) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV:

• on a bed, sofa, rug, or similar

surface;

• too close to drapes, curtains,

or walls; or

• in a confined space such as a

bookcase, built-in cabinet, or any other place with poor ventilation.

The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV.

21) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

22) Never overload wall outlets and extension cords.

05/02.2

Ground clamp

Antenna discharge unit (NEC Section 810-20)

Grounding conductors (NEC Section 810-21)

Power service grounding electrode system (NEC Art 250 Part H)

Ground clamps

Antenna lead-in wire

Electric service equipment

QUALIFIED

SERVICE

TECHNICIAN

23) Always operate this equipment from a 120 VAC, 60 Hz power source only.

29) [This item applies to projection TVs only.] If the air temperature rises suddenly (for example, when the TV is first delivered), condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate.

24) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).

25) DANGER: RISK OF SERIOUS PERSONAL

INJURY OR DEATH!

• Use extreme care to make sure you are never in

a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits.

• Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.

30)For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.

31) During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center.

32) Possible Adverse Effects on TV Picture Tube: If a fixed (non-moving) pattern remains on the TV screen for long periods of time, the image can become permanently engrained in the picture tube and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV on for long periods of time while it is displaying the following formats or images:

• Fixed Images, such as PIP/POP windows, stock tickers,

video game patterns, TV station logos, and websites.

• Special Formats that do not use the entire screen. For

example, viewing letterbox style (16:9) media on a normal (4:3) display (gray bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (gray bars on left and right sides of screen).

Care

For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:

26) Always sit approximately 10–25 feet away from the TV and as directly in front of it as possible. The picture can appear dull if you sit too far to the left or right of the TV, or if sunlight or room lights reflect on the screen. Turn the TV off to check for reflections on the screen, and then remove the source of reflections while viewing the TV.

27) Always unplug the TV before cleaning. Never use liquid or aerosol cleaners.

28) WARNING: RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of any kind into the TV cabinet slots.

Service

33) WARNING: RISK OF ELECTRIC SHOCK! Never attempt to service the

TV yourself. Opening and

removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center.

34) If you have the TV serviced:

• Ask the service technician to use only replacement parts

specified by the manufacturer.

• Upon completion of service, ask

the service technician to perform routine safety checks to determine that the TV is in safe operating condition.

35) When the TV reaches the end of its useful life, ask a

qualified service technician to properly dispose of the TV. Improper disposal may result in a picture tube implosion

05/02.2

and possible personal injury.

Important Safety Information ............................. 2-4

Introduction................................................................ 6

Welcome to Toshiba ......................................................... 6

Exploring your new TV ................................................... 6

Note regarding Quick Connect Guide .......................... 6

Connecting your TV .................................................. 7

Connecting a VCR .......................................................... 7

Connecting a cable converter box .................................... 8

Connecting a cable converter box and VCR..................... 8

Connecting a DVD player or satellite receiver and

a VCR.............................................................................. 9

Connecting a DVD player with ColorStream

(component video) and a VCR ...................................... 10

Connecting a DTV receiver/set-top box with ColorStream

Connecting two VCRs ................................................... 12

Connecting a camcorder ................................................ 12

Connecting an audio system .......................................... 13

Connecting an A/V receiver ........................................... 13

(component video) and a VCR ................ 11

Using the remote control ...................................... 14

Preparing the remote control for use .............................. 14

Installing the remote control batteries ............................ 14

Using the remote control with a VCR or a cable TV

converter ........................................................................ 14

Programming the remote control for use with a

non-Toshiba VCR or cable TV converter ....................... 15

VCR code table ...................................................... 16

Cable TV converter code table ................................ 17

Learning about the remote control ................................. 18

Setting up your TV .................................................. 19

Learning about the menu system ................................... 19

Changing the on-screen display language ....................... 20

Selecting the antenna input ............................................ 20

Adding channels to the TV’s memory ............................ 21

Programming channels automatically ...................... 21

Adding and erasing channels manually.................... 21

Using the Quick Connect Guide ................................... 22

Adjusting the tilt correction feature................................ 23

Changing channels ........................................................ 23

Changing channels using SpeedSurf........................ 23

Using the TV’s features.......................................... 24

Adjusting the channel settings ........................................ 24

Switching between two channels using

Channel Return ...................................................... 24

Switching between two channels using

Surf Lock™.............................................................. 24

Programming your favorite channels ....................... 24

Labeling channels ................................................... 26

Viewing the wide-screen picture formats ........................ 27

Selecting the image shape ........................................ 27

Watching PIP/double-window ....................................... 29

Switching the main and sub-pictures....................... 30

Changing the position of the small picture.............. 30

Freezing the sub-picture .......................................... 30

Using the Multi-Window feature ................................... 31

Using the favorite function ..................................... 31

Using the strobe function........................................ 31

Using the LOCKS menu ............................................... 32

Entering the PIN code ............................................ 32

If you cannot remember your PIN code .................. 32

Using the V-CHIP menu ............................................... 33

ENABLE BLOCKING .......................................... 33

TV RATING (Independent rating system for

broadcasters) ........................................................... 33

MPAA RATING (Independent rating system for

movies) ................................................................... 34

BLOCKING OPTION .......................................... 34

Unlocking programs temporarily ............................ 35

Locking channels ........................................................... 35

Locking video inputs ..................................................... 36

Using the front panel lock feature .................................. 37

Changing the PIN code ................................................. 37

Adjusting the picture ..................................................... 38

Selecting the picture mode ...................................... 38

Adjusting the picture quality ................................... 38

Saving new preference ............................................. 39

Using the flesh tone feature..................................... 39

Using the CableClear™ DNR (digital noise

reduction) feature ................................................... 39

Selecting the color temperature ............................... 40

Resetting picture adjustments ................................. 40

Selecting the cinema mode ...................................... 40

Selecting the video input source ..................................... 41

Labeling the video input sources .................................... 41

Using the closed caption feature..................................... 42

Setting the sleep timer.................................................... 43

Setting the clock ............................................................ 43

Adjusting the sound ....................................................... 44

Muting the sound ................................................... 44

Selecting stereo/SAP broadcasts .............................. 44

Using the SRS™ 3D surround sound feature ........... 45

Adjusting the sound quality .................................... 45

Resetting audio adjustments ................................... 46

Using the sub-bass system (SBS) ............................. 46

Turning off the built-in speakers ............................. 47

Selecting the Audio OUT sound ............................. 47

Using the StableSound® feature .............................. 48

Selecting the background of the menu display ............... 48

Displaying on-screen information .................................. 48

Viewing the demo mode ................................................ 49

Understanding the auto power off feature ...................... 49

Understanding the last mode memory feature ................ 49

Appendix ................................................................... 50

Specifications ................................................................. 50

Tr oubleshooting .............................................................51

Limited United States Warranty ..................................... 52

Limited Canada Warranty .............................................. 53

Index .......................................................................... 54

Introduction

Welcome to Toshiba

Congratulations! You have purchased one of the finest TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible.

This manual applies to models 32HF72 and 36HF72. Before you start reading, check your model number by looking at the rear of the TV.

Instructions in this manual are based on using the remote control.

your TV

Connecting

You can also use the controls on the TV if they have the same name as those on the remote control.

Please read all the safety and operating instructions carefully, and keep the manual for future reference.

Exploring your new TV

You can operate your TV using the buttons on the front panel or the remote control. The back panel and front panel (behind the door)

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

Appendix

provide all the terminal connections you will need to connect other equipment to your TV. See “Connecting your TV” on page 7.

TV front

TV rear

Video/audio inputs

(Video 3)

Behind the door

VIDEO-3 IN

S-VIDEO

VIDEO

L/MONO

AUDIO

Note regarding

Quick Connect Guide

The Quick Connect Guide automatically appears on-screen the first time the TV is turned on. This feature provides on-screen instructions to guide you through initial setup of your TV.

To stop the Quick Connect Guide, either press EXIT or turn off the TV.

See page 22 for details.

VOLUME x •

POWER

RECALL

CHANNEL zy

AUDIO

L/MONO R

V I DEOS-VIDEO

DEMO MENU TV/VIDEO V OLUME CHANNEL

DEMO

x •zy

TV/VIDEO

POWER

Remote sensor

Power indicator

ANT OUT

ANT-1 IN ANT-2 IN

ANT(75 )

COLOR STREAM

HD - 2

AUDIO

ANT-1 OUT ANT-2

OUT

VIDEO

VAR AUDIO

MONO

AUDIO

AUDIO CENTER CHANNEL IN

ON OFF

COLOR STREAM HD - 1

AUDIO

VIDEO-2VIDEO-1

LIGHT

TV CABLE VCR

MUTE

TV/VIDEO

123

456

789

100

FAVORITE

FAV

STROBE

STOP SOURCE

REC TV/VCR REW FF

CH RTN

ADV/

PIP CH

MENU/ ENTER

ADV/

PIP CH

STILL LOCATE SWAP

CT-90087

TIMER

VOL

ENT

PIC SIZE

FAV

EXIT

PLAY PIP

Index

VIDEO 1 and 2

ColorStream

HD2

HD1

Variable Audio OUT

Video/Audio

OUT

Audio Center

Channel IN

Connecting your TV

Note: Cables are not supplied with your TV.



Coaxial cable is the cable that comes in from your antenna, cable TV service, or cable converter box. Coaxial cable uses “F” connectors.



Standard stereo A/V cables usually come in sets of three, and are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. Your TV’s standard A/V inputs are color-coded in the same manner as the cables.



S-Video cable is for use with video equipment that has S-Video connectors.



Component video cables come in sets of three (typically color-coded red, green, and blue), and are for use with video equipment that has component video connectors. Your TV’s ColorStream the same manner as the cables.

NOTE REGARDING PICTURE QUALITY

When connecting video equipment to your Toshiba TV:



For GOOD picture quality: Use a standard yellow video cable.



For BETTER picture quality: If your equipment has S-video connectors, use an S-video cable instead of a standard yellow video cable. (You still must connect the standard red and white audio cables for full system connection, but do not connect a standard yellow video cable at the same time or the picture performance will be unacceptable.)



For BEST picture quality: If your equipment has component video connectors, use component video cables instead of a standard yellow video cable or S-video cable. (You still must connect the standard red and white audio cables for full system connection.)

(component video) inputs are color-coded in

Coaxial (antenna) cable

Standard stereo A/V cables (typically color-coded yellow for video, red and white for audio)

S-video cable

Component video cables (typically color-coded red, green, blue)

CAUTION: Do not plug in any power cords until you have finished connecting all equipment.

Introduction

your TV

Connecting

Using the

Remote Control

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

You will need:

• two coaxial cables (one or more may be provided by your cable company)

• one set of A/V cables

Cable lead-in from cable box or antenna

Stereo VCR

VIDEO AUDIO

OUT

ON OFF

S-VIDEO

VIDEO

L/MONO

AUDIO

IN from ANT

CH 3 CH 4

VIDEO-2VIDEO-1

OUT to TV

COLOR STREAM HD - 1

AUDIO

COLOR STREAM

HD - 2

AUDIO

ANT(75 )

ANT-1 OUT ANT-2

OUT

VIDEO

VAR AUDIO

MONO

AUDIO

AUDIO CENTER CHANNEL IN

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have an S-VHS VCR, use an S-video cable (in the S-video jacks) instead of the standard video cable.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

your TV

Setting up

Features

Using the TV’s

Appendix

Index

Connecting a cable converter box

This connection allows you to watch basic and premium cable channels.

Introduction

To use the TV’s features, select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

your TV

Connecting

Using the

Remote Control

Connecting a cable converter box and VCR

This connection allows you to watch and record basic and premium cable channels, watch videotapes, and record one channel while

your TV

Setting up

Features

Using the TV’s

Appendix

watching another channel. To use the TV’s features, select ANT-1. To view premium channels or record with the VCR, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

• three coaxial cables (one or more may be provided by your cable company)

From Cable

ANT(75 )

S-VIDEO

VIDEO

L/MONO

AUDIO

COLOR STREAM HD - 1

AUDIO

VIDEO-2VIDEO-1

COLOR STREAM

HD - 2

AUDIO

ANT-1 OUT ANT-2

OUT

VIDEO

VAR AUDIO

MONO

AUDIO

Cable converter box

AUDIO CENTER CHANNEL IN

ON OFF

IN OUT

• four coaxial cables (one or more may be provided by your cable company)

• one set of standard A/V cables

From Cable

ANT(75 )

ANT-1 OUT ANT-2

COLOR STREAM

HD - 2

AUDIO

MONO

Cable converter box

AUDIO

VIDEO

OUT

VAR

IN OUT

AUDIO

AUDIO CENTER CHANNEL IN

ON OFF

S-VIDEO

VIDEO

L/MONO

AUDIO

COLOR STREAM HD - 1

AUDIO

VIDEO-2VIDEO-1

Note:

When you use a converter box with your TV, the remote control will not operate some features,such as programming your favorite channels, labeling channels, and locking channels.

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have an S-VHS VCR, use an S-video cable (in the S-video jacks) instead of a standard video cable. Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and blocking channels.

Index

Stereo VCR

VIDEO

OUT

AUDIO

IN from ANT

CH 3 CH 4

OUT to TV

Connecting a DVD player or satellite receiver and a VCR

This connection allows you to watch DVD/satellite, VCR, and TV programs, record one TV channel while watching another channel, and record satellite channels.

You will need:

• two (or three, if satellite receiver is used) coaxial cables

(one or more may be provided by your cable or satellite company)

• two sets of standard A/V cables

• one pair of standard audio cables

• one S-video cable (between the TV and DVD player/satellite

receiver)

From antenna

Stereo VCR

VIDEO AUDIO

VAR AUDIO

OUT

AUDIO CENTER CHANNEL IN

ON OFF

From satellite dish

IN from ANT

CH 3 CH 4

S-VIDEO

VIDEO

L/MONO

AUDIO

OUT to TV

VIDEO-2VIDEO-1

AUDIO

COLOR STREAM HD - 1

COLOR STREAM

HD - 2

AUDIO

ANT(75 )

ANT-1 OUT ANT-2

OUT

VIDEO

MONO

AUDIO

Note:

For the highest possible picture quality from a non-component video DVD player/satellite receiver, use an S-video cable between the TV and DVD player/satellite receiver. (If your DVD player or satellite receiver has component video connections, see page 10).

Do not connect both an S-video cable and astandard video cable between the TV and DVD player/satellite receiver at the same time, or the picture performance will be unacceptable.

Do not connect the DVD player/satellite receiver and VCR to the same video channel on the TV. (See the illustrations, which show the DVD player/satellite receiver connected to Video-1 on the TV and the VCR connected to Video-2 on the TV.)

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

IN from ANT

S-VIDEO

DVD player/satellite receiver

AUDIO

OUT

VIDEO

OUTOUT

Features

Using the TV’s

Appendix

Index

Connecting a DVD player with ColorStream (component video) and a VCR

This connection allows you to watch DVD, VCR, and TV programs,

Introduction

your TV

Connecting

Using the

Remote Control

and record TV programs. Your TV has ColorStream

your TV to a DVD player with component video (such as a Toshiba DVD player with ColorStream and realism.

–To record one TV program while watching another TV program,

–To record a TV program while watching a DVD, tune the VCR to

You will need:

From Antenna

(component video) inputs. Connecting

) can greatly enhance picture quality

tune the VCR to the channel to record, and tune the TV to the channel to watch.

the channel to record, and select VIDEO 1 on the TV (see “Selecting the antenna input” on page 20).

• two coaxial cables (one or more may be provided by your cable company)

• two sets of standard A/V cables

• one pair of audio cables

• one set of component video cables (one S-video cable for a DVD player without component video; see notes at right)

Stereo VCR

IN from ANT

CH 3 CH 4

OUT to TV

VIDEO AUDIO

OUT

Note:

For the highest possible picture quality, use component video cables between the TV and DVD player. You can connect the component video cables from the DVD player to either ColorStream jack on the TV (HD1 or HD2).

The ColorStream HD1 and HD2 jacks can be used with Progressive (480p) and Interlaced (480i,1080i) scan systems.

If your DVD player does not have component video connections, use the S-video connections (plus the standard audio connections) instead of the ColorStream connections; however, do not connect both S-Video and standard video cables between the TV and DVD player at the same time.

your TV

Setting up

Features

Using the TV’s

Appendix

S-VIDEO

VIDEO

L/MONO

AUDIO

S-VIDEO

VIDEO-2VIDEO-1

COMPONENT VIDEO

AUDIO

COLOR STREAM HD - 1

PRPBY

COLOR STREAM

HD - 2

AUDIO

VIDEO

ANT-1 OUT ANT-2

VIDEO

MONO

AUDIO

OUT

DVD Player with component video

ANT(75 )

OUT

VAR AUDIO

AUDIO

OUT

LRL

AUDIO CENTER CHANNEL IN

ON OFF

Index

Connecting a DTV receiver/set-top box with ColorStream® (component video) and a VCR

This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV and TV programs.

Your TV has ColorStream (component video) inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism.

–To record and watch a DTV program, select LINE IN on the

VCR, and select ColorStream HD2 (or VIDEO 1 for a nonColorStream connection) on the TV (see “Selecting the antenna input” on page 20).

–To record a TV program while watching a DTV program, tune the

VCR to the channel to record, and select ColorStream HD2 on the TV.

–To record and watch the same TV program, tune the VCR to the

channel to record, and select VIDEO 1 on the TV.

–To record one TV program while watching another TV program,

tune the VCR to the channel to record, and tune the TV to the channel to watch.

You will need:

• three coaxial cables (one or more may be provided by your cable

company)

• two sets of standard A/V cables

• one pair of audio cables

• one set of component video cables (one S-video cable for a DTV

receiver without component video; see notes at right)

Note:

For the highest possible picture quality, use component video cables between the TV and DTV receiver. You can connect the component video cables from the DTV receiver to either ColorStream jack on the TV (HD1 or HD2).

The ColorStream HD1 and HD2 jacks can be used with Progressive (480p) and Interlaced (480i,1080i) scan systems.

If your DTV receiver does not have component video connections, use the S-video connections (plus the standard audio connections) instead of the ColorStream connections. Do not connect both an S-video and a standard video cable between the TV and DTV receiver at the same time.

To monitor recording, set the TV to VIDEO 1.

Introduction

your TV

Connecting

Using the

Remote Control

From Antenna

From DTV Antenna

Stereo VCR

IN from ANT

OUT to TV

VIDEO AUDIO

OUT

ANT(75 )

S-VIDEO

VIDEO

L/MONO

AUDIO

Satelite IN

COLOR STREAM HD - 1

AUDIO

VIDEO-2VIDEO-1

S-VIDEO

COMPONENT VIDEO

COLOR STREAM

HD - 2

AUDIO

ANT-1 OUT ANT-2

OUT

VIDEO

MONO

AUDIO

RPB

VIDEO

OUT

DTV Receiver with component video

VAR AUDIO

CH 3 CH 4

AUDIO CENTER CHANNEL IN

ON OFF

AUDIO

OUT

your TV

Setting up

Features

Using the TV’s

Appendix

Index

Connecting two VCRs

This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You can also record from

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

one TV channel while watching another TV channel. You will need:

• two coaxial cables (one or more may be provided by your cable company)

• two sets of standard A/V cables

VCR1

VIDEO AUDIO

From Antenna

IN from ANT OUT to TV

S-VIDEO

VIDEO

L/MONO

AUDIO

VIDEO-2VIDEO-1

VCR2

CH 3 CH 4

AUDIO

COLOR STREAM HD - 1

ANT-1 OUT ANT-2

COLOR STREAM

HD - 2

AUDIO

VIDEO AUDIO

VAR AUDIO

CH 3 CH 4

AUDIO CENTER

CHANNEL IN

ON OFF

OUT

ANT(75 )

OUT

VIDEO

MONO

AUDIO

OUT

Note:

If you have S-VHS VCRs, use S-video cables instead of standard video cables for better picture performance. Do not connect both a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

Do not connect the same VCR to the output and input jacks on the TV at the same time.

To dub or edit, VCR 2 must select Line IN, and the TV must select VIDEO 1 (see “Selecting the antenna input” on page 20).

The Video OUT jack does not output the

PIP picture.

The Audio OUT jacks can output the sound

of either the Main or PIP picture (see “Selecting the Audio OUT sound” on page

47).

Features

Using the TV’s

Appendix

Index

Connecting a camcorder

This connection allows you to watch video materials recorded on a camcorder.

You will need:

• one set of standard A/V cables

Camcorder

VIDEO

AUDIO

OUT

VIDEO-3 IN

AUDIO

L/MONO R

VIDEOS-VIDEO

Video-3 (front panel)

DEMO MENU TV/VIDEO V OLUME CHANNEL

Note:

If you have an S-VHS camcorder, use an S-video cable between the S-video jacks on the camcorder and TV instead of a standard video cable. Do not connect

both a standard video cable and an S-video cable at the same time, or the picture performance will be unacceptable.

Connecting an audio system

This connection allows you to use an audio amplifier to adjust the audio level. This also allows you to use external speakers.

To control the audio, turn on the TV and the stereo amplifier, and turn off the built-in speakers (see “Turning off the built-in speakers” on page 47).

You will need:

• one pair of audio cables

Note:

To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set above 0 (zero).

For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the amplifier is at its highest level.

S-VIDEO

VIDEO

L/MONO

AUDIO

ANT(75 )

COLOR STREAM HD - 1

AUDIO

VIDEO-2VIDEO-1

COLOR STREAM

HD - 2

AUDIO

ANT-1 OUT ANT-2

OUT

VIDEO

VAR AUDIO

MONO

AUDIO

AUDIO CENTER CHANNEL IN

ON OFF

Introduction

your TV

LR LINE IN

Amplifier

Connecting

Connecting an A/V receiver

This connection allows you to use an audio/video (A/V) receiver to enhance your TV’s sound.

VIDEO

surround sound, you can

ANT(75 )

ON OFF

OUT

VAR AUDIO

AUDIO CENTER CHANNEL IN

ON OFF

If you have a system with Dolby Pro Logic add to the realism of the sound by using the TV’s internal speakers as center channel speakers.

You will need:

• one coaxial cable (may be provided by your cable company)

• one set of standard A/V cables

• one single audio cable for the audio center channel

From Antenna

S-VIDEO

VIDEO

L/MONO

AUDIO

COLOR STREAM HD - 1

AUDIO

VIDEO-2VIDEO-1

COLOR STREAM

HD - 2

AUDIO

ANT-1 OUT ANT-2

MONO

AUDIO

Caution:

To avoid damaging the speakers:

• Turn off the TV before connecting or disconnecting the Audio Center Channel cable.

• Do not connect from the A/V receiver’s Center Speaker OUT (amplified signal) to the TV’s Audio Center Channel IN.

Dolby Pro Logic* surround sound

system connection example

Audio Video

VCR

Video

A/V receiver

LDP/DVD

Audio

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

From

video OUT

To TV IN

From

Center OUT

To A/V Receiver

Note:

Refer to the instructions provided with your A/V receiver for details about your surround sound system.

When the Audio Center Channel ON/OFF switch is in the ON position, the TV speakers will function only as center channel speakers. At this time, the SBS feature should be set to OFF. See page 46.

Adjust the volume for the center channel speakers using the center level control on the A/V receiver.

To use the TV speakers as normal speakers, set the Audio Center Channel ON/OFF switch to the OFF position.

Audio

Video

Audio

center

channel

T V

Left speaker

Surround speaker L

Right speaker

Surround speaker R

_________

*Dolby Pro Logic is a registered trademark of

Dolby Laboratories Licensing Corporation.

Appendix

Index

Using the remote control

Introduction

Preparing the remote control for use

With the remote control, you can operate your TV, most VCR models, and cable TV converters together, even if they are different brands. If you will be using your TV with a Toshiba VCR, your remote control is already programmed and ready to use. If you own different brands of VCRs and/or converters, you first have to program your remote control. (See “Programming the remote control for use

your TV

with a non-Toshiba VCR or a cable TV converter” on page 15.)

Connecting

Installing the remote control batteries

To install the batteries:

Using the

Remote Control

your TV

Setting up

1. Slide the battery cover off the back of the remote control.

2. Install two “AA” size alkaline batteries. Match the + and - signs on the batteries to the signs on the battery compartment.

Note:

Your TV’s remote control may not operate certain features on your VCR, cable TV converter, or other electronic device.

Refer to the owner’s manuals for your other devices to determine their available features.

If your TV’s remote control does not operate a specific feature on a device, use the remote control that came with the device.

Caution:

• Dispose of batteries in a designated disposal area. Do not throw batteries into a fire.

• Do not mix battery types or combine used batteries with new ones.

• If the remote control does not operate correctly, or if the operating range becomes reduced, replace both batteries with new ones.

• If the batteries are dead or if you will not use the remote control for a long time, remove the batteries to prevent battery acid from leaking into the battery compartment.

Features

Using the TV’s

Appendix

Index

3. Slide the battery cover back on to the remote control until the lock snaps.

Using the remote control with a VCR or a cable TV converter

To control a VCR:

If you have a non-Toshiba VCR, program the remote control to recognize your VCR brand (see “Programming the remote control for use with a non-Toshiba VCR or a cable TV converter” on page 15).

Set the TV/CABLE/VCR switch to the VCR position. The shaded buttons shown at right will then control the VCR. The unshaded buttons will operate the TV as usual.

To control a cable TV converter:

If you have a non-Toshiba cable TV converter, program the remote control to recognize your converter brand (see “Programming the remote control for use with a non-Toshiba VCR or a cable TV converter” on page 15).

Set the TV/CABLE/VCR switch to the CABLE position. The shaded buttons in the top portion of the illustration at right will control the cable TV converter.

RECALL

LIGHT

TV CABLE VCR

FAV

TV/VIDEO

MUTE

123

456

789

CH RTN

100

ADV/

PIP CH

FAVORITE

MENU/

ENTER

STROBE

ADV/

PIP CH

STOP SOURCE

REC TV/VCR REW FF

STILL LOCATE SWAP

ENT

PLAY PIP

POWER

TIMER

VOL

PIC SIZE

EXIT

TV/CABLE/VCR

POWER

Channel yz

Channel Number

Enter

FAV

PLAY STOP Fast Forward Rewind TV/VCR Record

Programming the remote control for use with a non-Toshiba VCR or a cable TV converter

The remote control is pre-programmed to operate Toshiba VCRs. To use the remote control to operate a non-Toshiba VCR or cable converter, follow the steps below to program the remote control.

1. Refer to the “VCR code table” or “Cable TV converter code table” on pages 16–17 to find the corresponding code for your VCR or cable TV converter brand.

If more than one code is listed, try each one separately until you find the one that works.

2. If you are reprogramming the remote control to operate your:

• VCR: Set the TV/CABLE/VCR switch on the remote control

to VCR.

• Cable converter: Set the TV/CABLE/VCR switch on the

remote control to CABLE.

3. While holding down the RECALL button, press the Number buttons (0–9) to enter the three-digit code for your VCR or cable TV converter.

4. Point the remote control at the VCR or converter and press POWER to test the code.

If the VCR or converter responds, you have entered the correct code.

If the VCR or converter does not respond, you may have entered the wrong code. Repeat steps 1–4 using another code.

5. Reset the TV/CABLE/VCR switch to TV to control the TV.

For future reference, write down the code(s) you used:

VCR code ________________________________ Cable TV converter code ____________________

VOL

FAV

EXIT

RECALL

POWER

Channel yz

Channel Number

Enter

LIGHT

TV CABLE

MUTE

VCR

123

456

789

100

PIP CH

FAVORITE

STROBE

MENU/ ENTER

PIP CH

FAV

ADV/

RECALL

TV/VIDEO

CH RTN

ENT

POWER

TIMER

PIC SIZE

Note:

• Each time you replace the batteries, you must reprogram the remote control.

• Some newer VCRs are capable of working on either of two remote codes. These VCRs have a switch labeled “VCR1/VCR2.”

If your VCR has this kind of switch and does not respond to any of the codes for your VCR brand, set the switch to the other position (VCR1 or VCR2) and reprogram the remote control.

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

Appendix

Index

VCR code table

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

Appendix

Index

Brand name Code number

Adventura 019

Aiko 297

Aiwa 019

Akai 060,068,080,125,

261

American High 054

Asha 259

Audiovox 056

Beaumark 259

Bell & Howell 123

Brandt 206

Broksonic 140,203,230,314,

380

Calix 056

Canon 054

Capehart 039

Carver 100

CCE 091,297

Citizen 056,297

Colt 091

Craig 056,066,091,259

Curtis Mathes 054,060,079

Cybernex 259

Daewoo 039,064,297

Daytron 039

Dynatech 019

Electrohome 056

Electrophonic 056

Emerex 051

Emerson 019,021,056,062,

080,087,140,203,

227,228,230,231,

297,313,314,380,

498

Fisher 066,073,085,123

Fuji 052,054

Funai 019,344

Garrard 019,344

GE 054,079,084,221

Go Video 251,298

Goldstar 037,056,057

Gradiente 019

Harley Davidson 019

Harman/Kardon 057,094

Harwood 087,091

Headquarter 065

HI-Q 066

Hitachi 060,061,084,124,

254

Jensen 060

JVC 027,060,086

Kenwood 057,060,086

KLH 091

Kodak 054,056

Lloyd 019

Lloyd’s 227

Logik 091

LXI 056

Magnavox 054,058,100,129,

168

Magnin 259

Marantz 054,100

Marta 056

Masushita 054

MEI 054

Memorex 019,054,056,058,

065,066,067,123,

259

MGA 062,080

MGN Technology 259

Minolta 061,124

Mitsubishi 062,080,086,094,

192,233,261

Motorola 054,067

MTC 019,259

Multitech 019,091

Nad 077

NEC 057,059,060,069,

086

Nikko 056

Noblex 259

Olympus 054

Optimus 056,067,077,123

Optonica 081

Orion 498

Panasonic 054,096,181,244

Penney 054,056,057,059,

061,073,259

Pentax 061,084,124

Philco 054

Philips 054,081,100,129

Pilot 056

Pioneer 077,086

Portland 039

Protec 091

Pulsar 058

Quarter 065

Quartz 065

Quasar 054,096

Radio Shack 019,056,344

Radix 056

Randex 056

RCA 061,079,084,096,

124,125,168,221

Realistic 019,054,056,065,

066,067,081,085,

123,259

Ricoh 053

Runco 058

Samsung 064,259

Sanky 058,067

Sansui 060,086

Sanyo 065,066,123,259

Scott 062,064,140,203,

229,230,231

Sears 054,056,061,065,

066,073,085,123,

124

Sharp 067,081

Shintom 091

Shogun 259

Singer 091

Sony 051,052,053,054

STS 061

Sylvania 019,054,062,100,

129

Symphonic 019,344

Tatung 060

Teac 019,060

Technics 054,181

Te knika 019,054,056,071

Telefunken 060,206

TMK 227,259

Toshiba 062,064,085,229,

231,385

Totevision 056,259

Unitech 259

Vector 064

Vector Research 057,059

Video Concepts 059,064,080

Videosonic 259

Wards 019,054,061,066,

067,081,091,168,

231,259

XR-1000 019,054,091

Yamaha 057

Zenith 052,053,058

Cable TV converter code table

Brand name Code number

ABC 020,022,026,027,

030,032,033,036,

066

Antronix 041

Archer 041,058,172

Belcor 075

Cable Star 075

Cabletenna 041

Cableview 041

Century 172

Citizen 172

Colour Voice 044,050

Comtronics 059,079

Contec 038

Dae Ryung 027

Eastern 021

Focus 419

Garrard 172

GC Electronics 035,075

Gemini 034,089

General Instrument 030,295

GoldStar 059,163

Hamlin 028,039,053,278,

292

Hitachi 030

Hytex 026

Jasco 172

Jerrold 022,030,031,033,

034,043,066,295

Macom 052

Magnavox 046

Memorex 019

Movie Time 175

NSC 089,175

Oak 026,038,267

Panasonic 019,040,126

Paragon 019

Philips 044,046,047,048,

049,050,172

Pioneer 042,163,552

Popular Mechanics 419

Pulsar 019

RCA 040

Recoton 419

Regal 039,278,292

Regency 021

Rembrandt 030,089

Runco 019

Samsung 059,163

Scientific Atlanta 025,027,036,296

Signal 034,059

Signature 030

SL Marx 059

Sprucer 040

Standard

Components 174

Starcom 022,034,066

Stargate 034,059

Starquest 034

Sylvania 020

Teleview 059

Texscan 020

Tocom 031,032,078

Toshiba 019

Tusa 034

Unika 041,172

United Artists 026

United Cable 022

Universal 041,058,075,096,

172,210

Viewstar 046,079,230

Zenith 019

Zentek 419

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

Appendix

Index

+ 38 hidden pages