AV6**D Digital
Series
RV6**D Digital
Series
Contents
English
INSTALLING YOUR TV
Safety Precautions ..................................................4
Installation and important information ....................5
The remote control .................................................6
Inserting batteries and effective range of the
remote ..........................................................6
CONNECTING YOUR TV
Connecting external equipment ..............................7
Connecting an HDMI™ or DVI device to the HDMI
input ...................................................................8
To connect an HDMI device ..............................8
To connect a DVI device ...................................8
Connecting a computer ..........................................9
To connect a PC to the RGB/PC terminal ..........9
To connect a PC to the HDMI terminal ..............9
Controls and input connections .............................10
Switching on ..................................................10
Using the remote control ...............................10
Using the controls and connections ................10
SETTING UP YOUR TV
Startup Application ...............................................11
Quick Setup ...................................................11
Ant/Cable In (if available) ..............................12
Auto Tuning ...................................................13
ATV Manual Tuning ..............................................13
Tuning ...........................................................13
Skip ...............................................................15
Sorting positions ............................................15
DTV Manual Tuning ..............................................16
Manual Tuning ..............................................16
Manual Tuning for DVB-C ..............................16
DTV Settings .........................................................16
Channels .......................................................16
Auto Channel Update ....................................17
DVB Character Set .........................................17
Analogue switch-off .....................................17
Location setting .............................................17
CONTROLS AND FEATURES
General controls ...................................................18
Selecting positions .........................................18
The Time Display – analogue only ................18
Stereo and Bilingual transmissions .................18
Quick Menu ...................................................18
Sound controls .....................................................19
Volume controls and mute sound ...................19
Dual .............................................................19
Bass, Treble and Balance ...............................19
Advanced Sound Settings ..............................19
Stable Sound
Dynamic Range Control .................................19
Audio Level Offset .........................................20
Headphone Settings ...................................... 20
Audio description ..........................................20
Widescreen viewing .............................................21
Picture controls ....................................................23
Picture Position ..............................................23
Picture Mode .................................................23
Picture preferences ........................................23
Reset .............................................................24
3D Colour Management ................................24
Base Colour Adjustment ................................24
Colour Temperature ......................................24
Auto Brightness Senser Settings .....................25
Active Backlight Control .................................25
Black/White Level ..........................................25
Static Gamma ...............................................25
MPEG NR – Noise Reduction ..........................25
DNR – Digital Noise Reduction .......................25
Resolution+ ..................................................26
Cinema Mode ...............................................26
Expert Mode ..................................................26
Resetting the advanced picture settings ..........26
Control Visualization .....................................27
Automatic Format (Widescreen) .....................27
4:3 Stretch ....................................................27
Blue Screen ...................................................27
Side panel adjustment ...................................27
Picture still ..................................................... 27
Enjoying Photo through USB port ..........................28
To open Photo Viewer ...................................28
Viewing photo files ........................................29
Other features .....................................................30
Panel lock .....................................................30
TOSHIBA Illumination ....................................30
The timers ............................................................30
Programme Timers – digital only ..................30
On Timer ......................................................31
Sleep Timer ...................................................31
Digital on-screen information and
Programme Guide .............................................32
Information ...................................................32
Guide ...........................................................33
Genre selection/searching .............................33
®
...............................................19
2
Digital settings – parental control ........................34
Setting the PIN ..............................................34
Parental Setup ...............................................34
Digital settings – Channel Options .......................35
Selecting favourite channels ...........................35
Favourite Channel Lists ..................................35
Skip channels ................................................35
Locking channels ...........................................35
Digital settings – other settings .............................36
Subtitles ........................................................36
Audio languages ...........................................36
Common Interface .........................................36
Software Upgrade ................................................37
Auto Upgrade ................................................37
Searching for New Software ...........................37
System Information and Reset TV ..........................37
System Information ........................................37
Reset TV ........................................................37
PC Settings ...........................................................38
Horizontal and Vertical Position .....................38
Clock Phase ...................................................38
Sampling Clock .............................................38
Reset .............................................................38
Input selection and AV connections .......................39
Input selection ...............................................39
External input skip .........................................39
INPUT signal selection ...................................39
PC Audio .......................................................39
HDMI 1 Audio ...............................................40
HDMI Settings ...............................................40
Digital Audio Output ......................................40
English
TEXT SERVICES
Text services .........................................................41
Selecting modes ............................................41
Text information ............................................41
Navigating pages using Auto .........................41
Navigating pages using LIST ..........................41
Control buttons ..............................................42
PROBLEM SOLVING
Questions and Answers ......................................43
INFORMATION
Notes ...................................................................46
Information ..........................................................48
Specifications and accessories ...............................50
3
INSTALLING YOUR TV
Safety Precautions
English
This equipment has been designed and manufactured
to meet international safety standards but, like any
electrical equipment, care must be taken to obtain the
best results and for safety to be assured. Please read
the points below for your own safety. They are of a
general nature, intended to help with all electronic
consumer products and some points may not apply to
the goods you have just purchased.
Air Circulation
Leave more than 10cm clearance around the television
to allow adequate ventilation. This will prevent
overheating and possible damage to the television.
Dusty places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between 5°C
(41°F) min. and 35°C (94°F) max.
Mains Supply
The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or
any other power source. DO ensure that the television
is not standing on the mains lead. Use only the
supplied lead.
DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter, the
removal of which will impair its performance.
IF IN DOUBT PLEASE CONSULT A COMPETENT
ELECTRICIAN.
Do
DO
read the operating instructions before you attempt
to use the equipment.
DO
ensure that all electrical connections (including the
mains plug, extension leads and inter-connections
between pieces of equipment) are properly made and
in accordance with the manufacturers’ instructions.
Switch off and withdraw the mains plug before making
or changing connections.
DO
consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO
be careful with glass panels or doors on
equipment.
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND 'LIVE' PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING
DEVICE AND THEREFORE SHOULD BE READILY
OPERABLE.
Do not
DO NOT
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DO NOT
dripping or splashing or objects filled with liquids, such
as vases, to be placed on the equipment.
DO NOT
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
DO NOT
wood screws. To ensure complete safety, always fit the
manufacturers’ approved stand, bracket or legs with
the fixings provided according to the instructions.
DO NOT
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, make sure
your family know how to do this. Special arrangements
may need to be made for people with disabilities.
DO NOT
in any doubt about it working normally, or it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.
WARNING
earphones or headphones can cause hearing loss.
ABOVE ALL – NEVER let anyone, especially
children, push or hit the screen, push anything
into holes, slots or any other openings in the
case.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.
obstruct the ventilation openings of the
allow electrical equipment to be exposed to
place hot objects or naked flame sources,
use makeshift stands and NEVER fix legs with
leave equipment switched on when it is
continue to operate the equipment if you are
– excessive sound pressure from
4
INSTALLING YOUR TV
Installation and important information
Where to install
Locate the television away from direct sunlight and
strong lights, soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to prevent
direct sunlight falling on the screen.
Place the TV on a stable, level surface that can support
the weight of the TV. As an additional safety measure
you can secure the TV to the level surface or a wall, as
shown in the illustration, using a sturdy strap.
The LCD display panels are manufactured using an
extremely high level of precision technology, however
sometimes some parts of the screen may be missing
picture elements or have luminous spots. This is not a
sign of a malfunction.
Make sure the television is located in a position where
it cannot be pushed or hit by objects, as pressure will
break or damage the screen, and that small items cannot be inserted into slots or openings in the case.
Cleaning the screen and cabinet…
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you
proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Please take note
The digital reception function of this television is only effective in the countries listed in the “COUNTRY” section of
the “SETUP” menu. Depending on country/area, some of this television's functions may not be available. Reception
of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on screen menus, etc. are left on the television screen for any length of time they could become
conspicuous, it is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3
outlines, this is not a defect of the LCD TV and is not covered under the manufacturers warranty. Regular use of
other size modes (eg: Superlive) and varying the “side panel” brightness (if available on the model) will prevent
permanent retention.
Side View Top View
Stand clip
Sturdy tie
‘P’ Clip
‘P’ Clip
Fixing strap
Fixing strap
‘P’ Clip
(as short as possible)
do not
use any
English
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) fire;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s
manual ;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited
to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or
misuse of the product.
5
INSTALLING YOUR TV
The remote control
English
Simple at-a-glance reference of your remote
control.
2
3
4
7
8
10
11
15
17
18
1
For On/Standby mode
2
To select external input sources
3
Picture still
4
To call up text services
5
Stereo/bilingual transmissions
6
Digital Subtitles or Analogue TEXT Subtitle pages if
available
7
Number buttons
8
Switch the Audio Description On/Off
9
To switch between ATV (analogue television) and DTV (DTV
TV/DTV RADIO/DTV TEXT if available)
10
To alter the TV volume
11
To mute the TV sound
12
In TV mode: To change programme positions
In Text mode: To change text pages
13
In TV mode: To display on-screen information
In Text mode: To access index page in Text mode
14
To access Quick Menu
1
15
5
6
9
13
12
14
To display the
16
To exit menus
17
When using menus the arrows move the cursor on the
screen up, down, left or right.
18
To display the on-screen menu
19
To return to the previous menu
20
Text control buttons
21
When in Text mode:
A
B
C
D
When in TV mode:
D
digital
on-screen Programme Guide
Q
to confirm your selection
To reveal concealed text
To hold a wanted page
To enlarge text display size
To select a page whilst viewing a normal
picture
Analogue time display
16
Inserting batteries and effective range of
the remote
19
20
21
prevent acid from leaking into the battery compartment.
Dispose of them in accordance with instructions on page 46 of
this manual.
excessive heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate beyond
a distance of five metres or outside an angle of 30 degrees
from the centre of the television. If the operating range
becomes reduced the batteries may need replacing.
Warning:
Remove the back cover to
reveal the battery
compartment and make sure
the batteries are inserted the
right way round. Suitable
battery types for this remote
are AAA, IEC R03 1.5V.
Do not combine a used, old
battery with a new one or mix
battery types. Remove dead
batteries immediately to
batteries must not be exposed to
6
CONNECTING YOUR TV
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
OPTICAL DIGITAL AUDIO OUTPUT
HDMI™ INPUT
SOCKETS
COMPONENT VIDEO INP UT (EXT 3)
SCART 2 (EXT 2)
Illustration represents 32RV635D.
English
SCART 1 (EXT 1)
*a decoder could
be Digital Satellite or
any other compatible
decoder.
Antenna/Cable
decoder*
media recorder
Aerial cables:
Connect the aerial to the socket on the rear of the television.
If you use a decoder* and/or a media recorder it is essential
- - - - - - - - - - - - - - - - - - - - - -
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
SCART leads:
Connect the video recorder
Connect the decoder
media recorder
Before running
recorder to
The phono sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
. . . . . . . . . . . . . . . . . . . . . . . . . .
IN/OUT
TV
SAT
socket to the decoder
Auto Tuning
Standby
.
socket to the television. Connect the
socket to the television.
, put your decoder and media
MEDIA REC
. socket.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
.
active
HDMI™ (High-Definition Multimedia Interface) is for use with
a DVD decoder or electrical equipment with digital audio and
NOTE: this output is always
video output.
For acceptable video or PC signal formats through the HDMI
terminals, see page 49.
NOTE:
Although this television is able to connect to HDMI
equipment it is possible that some equipment may not operate
correctly.
POWER switch
FIXING STRAP
RS-232C port (for service use only)
A wide variety of external equipment can be connected
to the back of the television; therefore, the relevant
owners manuals for
all
additional equipment must be
referred to for exact instructions.
We recommend
media recorder.
If connecting S-VIDEO equipment, set the
page 39
See
.
SCART 1
for a decoder and
SCART 2
INPUT
for
for a
EXT 2
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press
o
to select between
HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC
If
r
button is pressed while viewing DTV mode, the picture
on your screen and the SCART output will become a still
DTV, EXT 1, EXT 2, EXT 3
or
ATV
.
,
picture.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
The SCART output will also be muted in EPG mode.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks
of Dolby Laboratories.
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or regist ered tr ademarks of HDMI
INSTAPORT™ and INSTAPORT logo are trademarks of Si licon Image, Inc.
in the United States and other countries.
Licensing, LLC.
.
7
CONNECTING YOUR TV
Connecting an HDMI™ or DVI
English
device to the HDMI input
The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device, or uncompressed digital video
from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant
devices (such as a set-top box or DVD player with HDMI or DVI
output). For acceptable video signal formats, see page 49.
NOTE:
• Some early HDMI equipment may not work properly with
[1]
consumer electronic
your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the
following options (
Lip Sync, INSTAPORT™
) to “
Off
early HDMI source should operate properly with your
television. See page 40.
• Supported Audio format: Linear PCM, sampling rate 32/
44.1/48kHz.
To connect an HDMI device
Connect an HDMI cable (type A connector) to the HDMI
terminal.
For proper operation, it is recommended that you use an HDMI
cable with the HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this mode.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
• See “HDMI 1 Audio” on page 40.
The HDMI 4 terminal is located on the side of the television.
”. Your
To connect a DVI device
Connect an HDMI-to-DVI adapter cable (HDMI type A
connector) to the HDMI 1 terminal and audio cables to the PC/
HDMI1 (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adapter cable length is 6.6
ft (2m).
• An HDMI-to-DVI adapter cable transfers video only.
Separate analogue audio cables are required.
• See “HDMI 1 Audio” on page 40.
Audio cable for HDMI to
television connection
(not supplied)
HDMI-to- DVI
DVI device
VIDEO AUDIO
LR
IN
OUT
R
L
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the
television first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the television.
adapter Cable
DVI/HDCP
OUT
HDMI cable
HDMI device
VIDEO AUDIO
LR
IN
OUT
R
L
To view the HDMI device video, press the
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.
HDMI OUT
o
button to select
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed
digital video with high-bandwidth digital content protection, which is
being standardized for reception of high-definition video signals. Because
this is an evolving technology, it is possible that some devices may not
operate properly with the televisi on.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered t rademarks of HDMI Licensing LLC.
8
Connecting a computer
With either an RGB/ PC or an HDMI con nection, you
can watch your computer’s display on the television
and hear the sound from the televisions speakers.
CONNECTING YOUR TV
• When PC input mode is selected some of the television’s
features will be unavailable e.g.
SETUP
menu,
Level
• If connecting a certain PC model with a unique PC signal, the
PC signal may not be detected correctly.
Colour, Tint, Sharpness
in the
PICTURE
menu.
Manual Settings
and
Black/White
in the
English
To connect a PC to the RGB/PC terminal
When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable and
a PC audio cable for the PC/HDMI1 (AUDIO) socket. Select
PC/HDMI 1 Audio
from the
menu located in the
SETUP
options in the
menu.
AV Connection
the back of your television
Mini D-sub
15 pin connector
Computer
Audio cable for PC to
television connection
(not supplied)
RGB PC cable
(not supplied)
Conversion
adaptor if required
(not supplied)
To use a PC, set the monitor output resolution on the PC before
connecting it to the television. For acceptable PC signal
formats, see page 48.
To display the optimum picture, use the PC setting feature (see
page 38).
NOTE:
• The PC audio input terminal on the television is shared with
the HDMI 1 analogue audio input terminal (see page 39).
• Some PC models cannot be connected to this television.
• An adapter is not needed for computers with a compatible
mini D-sub15-pin terminal.
• Depending on the DVD’s title and the specifications of the PC
on which you are playing the DVD-Video, some scenes may
be skipped or you may not be able to pause during multiangle scenes.
• A band may appear at the edges of the screen or parts of the
picture may be obscured. This is due to scaling of the picture
by the set, it is not a malfunction.
PC
To connect a PC to the HDMI terminal
When connecting a PC to the HDMI terminal on the television,
use an HDMI-to-DVI adapter cable and an analogue audio
cable.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). A separate analogue cable is not necessary
(see page 8).
the back of your television
Computer
HDMI-to-DVI
adapter cable
For acceptable PC and video signal formats, see page 49.
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC signal, the
PC signal may not be detected correctly.
Audio cable
for PC to
television
connection
(not supplied)
9
CONNECTING YOUR TV
Controls and input connections
English
A wide variety of external equipment can be connected to the input sockets on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions
Illustration represents 32RV635D.
POWER switch
.
Standby
COMMON INTERFACE
The Common Interface is for a
Conditional Access Module
(CAM).
Contact a service provider.
USB port
To access photo
files
HDMI 4 INPUT
(Not available on
all models.)
Input 3 (side)
will take priority over
EXT 3 (back) if both
connections are used
at the same time.
ORANGE LED - Programme
digital
timer set (
RED LED – Programme
timer Active (
GREEN LED – On Timer set
only)
digital
only)
Switching on
If the RED LED is unlit, check that the mains plug is connected
to the power supply and press the
left side of the television to switch the television on. If the
picture does not appear, press
take a few moments. The GREEN LED will be lit.
To put the television into Standby, press
control. To view the television, press
take a few seconds to appear.
!
(POWER) button on the
1
on the remote control, it may
1
on the remote
1
again. The picture may
Using the remote control
MENU
Press
The menu appears as a list of five topics. As each symbol is
selected by pressing
remote control, its respective options will appear below.
NOTE:
ATV (Analogue TV) modes; however, some items are greyed
out in each case.
To use the options, press
move up and down through them and
or
instructions. The functions of each menu are described in
detail throughout the manual.
on the remote control to see the menus.
C
or c on the navigation ring on the
The same menu is displayed in DTV (Digital TV) and
B
and b on the remote control to
c
to select the required choice. Follow the on-screen
Q
, and then, press C
INPUT 3
(EXT 3)
RED LED – Standby
GREEN LED – Power on
Using the controls and connections
2
To alter the volume press –
To alter the programme position press
MENU
Press
options.
Press
An S-video cable provides better picture performance than a
composite video cable. If you connect an S-video cable to
EXT 3
cable or the picture performance will be unacceptable.
To select an external input, press
input source is selected as described on
Please always refer to the owner’s manual of the equipment to
be connected for full details.
NOTE:
type of joystick at an on-screen target may not work with this
TV.
and I, i, U or u to control the sound and picture
MENU
to finish.
, be sure to disconnect the standard (composite) video
Interactive video games that involve shooting a "gun"
+.
b p B
o
until the appropriate
page 39
.
.
10
SETTING UP YOUR TV
English
Startup Application
Before switching on the television, put your decoder
and media recorder, if applicable, to
To set up the television use the buttons on the
remote control as detailed on page 6.
Quick Setup
a
Press the 1 button. The
appear. This screen will appear the first time that the
television is switched on and each time
selected.
Quick Setup
Menu Language English
Country Germany
Primary Subtitle Language
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
b
Highlight
Menu Language
the menu language.
c
Press b to highlight
television will now tune the stations for your country.
d
Press Q, the
Location
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
e
Press C or c to select
home use, select
If the Home option is selected the AutoView option will
be activated, allowing the TV to automatically adjust
the picture setting based on the user’s individual
viewing environment. In most cases this will result in
the TV operating with lower energy consumption.
Country
Location
Home
Quick Setup
screen will appear.
Store
Store
.
Standby
screen will
English
English
English
English
and press C or c to select
and C or c to select. The
or
Home
.
Reset TV
. For normal
is
h
Press b or B to highlight
Auto Tuning
NOTE:
If
Cable
options appear in the
Cable In“ section.
The television will start to search for available
and/or
the scan status.
You must allow the television to complete the
search.
Auto Tuning
DTV Tune 3% 2
ATV Tune Waiting...
When the search is complete the television will
automatically select position one.
Auto Tuning
The
of services found.
i
Press C or c to view the
(analogue channel) lists.
j
Use b or B to move through the list to select a
channel then press
ATV
In
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using
REMEMBER:
between
if available) modes.
NOTE:
transmission but can be advanced or decreased by
using
is selected in step 6, additional setting
ATV
channels. The progress bar will indicate
Progress Found
mode some areas may receive duplicate
ATV Manual Tuning
Press
ATV
and
The time will be set automatically by
Local Time Setting
Start Scan
DTV and ATVTuning Mode
Start Scan
Auto Tuning
Channel: C7
screen will display the total number
DTV
(digital channel) or
Q
to view.
.
ATV/DTV
DTV
at any time to select
(DTV TV/DTV RADIO/DTV TEXT
in the
DTV Settings
, then press Q.
screen. See “Ant/
DTV
ATV
screen.
f
Press Q. If the
C
or c to select
Ant/Cable In
g
Press Q, the
with the option to select between
or
ATV
appropriate mode.
Auto Tuning
if available. Use C or c to select the
Ant/Cable In
Antenna
or
Antenna
start up screen will appear
screen appears, press
Cable
.
DTV and ATV, DTV
11
PLEASE NOTE
The
Reset TV
time from the
menu can also be accessed at any
SETUP
menu.
SETTING UP YOUR TV
English
From this menu, you can set the RF input configuration to
cable.
a
b
c
With the exception of
items, all of the following items will have 2 operating modes.
The first is
the system. The second is an
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
Ant/Cable In (if available)
Press
MENU
, and select
Use b to highlight
select
Antenna
NOTE:
When you attempt to change the
In
setting, a warning message will appear followed by
PIN entry (if PIN has been set) and prompt for
.
Tuning
When
Ant/Cable In
setting options will be provided in the
screen.
B
or b to select an item, then press C or c to
Press
select your desired option.
Auto Tuning
DTV
DTV Scan Type
Auto
where the values for each item are preset by
Ant/Cable In
or
Cable
is set to
Start Scan
Input
SETUP
menu.
and use C or c to
.
Ant/Cable
Cable
, the following
Auto Tuning
DTV and ATVTuning Mode
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
and
DTV Modulation
mode where you will be
Input
state is chosen, a
DTV Scan Type:
This item determines whether a
be executed.
Quick Scan
The
designed to complete in less time.
is a simplified version of the
Quick Scan
or a
Full Scan
Full Scan
DTV Start Frequency:
This sets the frequency from which the scan will begin.
Auto
will
that is
DTV End Frequency:
This sets the frequency at which the scan will end.
* Valid entry range for frequency items is 113.000-858.00 for
C-Book/Other and 114.000-858.00 for Nordig-C. If
numbers outside of this range are entered, the values will
automatically be set to the min. or max. valid value as
appropriate.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
* Valid entry range for Symbol Rate is 4000-7200. If a number
outside of this range is entered, value will be automatically
set to the min. or max. valid value as appropriate.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
greyed out when DTV Scan Type is set to “Full Scan”.
* Valid entry range for Network ID is 1-65535. If a number
outside of this range is entered, value will be automatically
set to the min. or max. valid value as appropriate.
12
SETTING UP YOUR TV
English
Auto Tuning
NOTE:
As new services are broadcast it will be necessary to re-
tune the television in order to view them.
Auto Tuning
It is recommended that Auto Tuning is run periodically to
ensure that all new services are added
and settings, i.e. favourites and locked channels, will be lost.
a
b
c
will completely re-tune the television and can be
used to up date the channel list.
. All current channels
Press
MENU
Use
SETUP
A screen will appear warning that previous
programmes and settings will be deleted.
Auto Tuning
Use
available, then highlight
continue with the
NOTE:
field in the
other than "
broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV
and/or ATV services.
You must allow the television to complete the
search.
When the search is complete the
will display the services found.
Use b or B to move through the list to select a
channel then press
and use C or c to select
b
to highlight
Menu Language English
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
Previous settings will be lost!
Press EXIT for no change.
C
or c to select
If you have selected "
Auto Tuning
DTV and ATVTuning Mode
Start Scan
DTV and ATV, DTV
Start Scan
Auto Tuning
SETUP
menu, and select the tuning mode
DTV
" , choose the optimum ATV
Q
to view.
. Press Q.
Germany
Antenna
and press Q to
.
Others
" for the
Auto Tuning
SETUP
or
menu.
ATV
, if
Country
screen
ATV Manual Tuning
Tuning
The television can be tuned-in manually using
. For example: if the television cannot be connected to
Tuning
a media recorder/decoder with a SCART lead or when you
want to tune-in a station on another
Use C and c to move across the screen and select any of the
ATV Manual Tuning options. Then use
settings.
ATV Manual Tuning
System: I
I
1 A C 2 0 V C R
123 4 65 7 8 9
1
Position:
The number to be pressed on the remote control to tune
the channel.
2
System:
Specific to certain areas.
3
Colour System:
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4
Skip:
8
means nothing has been saved or the facility to skip
the channel is ON. See page 15.
5
Signal Class:
The channel classification.
6
Channel:
The channel classification and the channel number on
which a station is being broadcast.
7
Search:
Search up and down for a signal.
8
Manual Fine Tuning:
Only used if interference/weak signal is experienced. See
page 43.
9
Station:
Station identification. Use the B or b and C or c buttons
to enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder and press PLAY, then manually
tune.
System
B or b
.
ATV Manual
to adjust the
13
SETTING UP YOUR TV
a
Press
English
b
c
d
MENU
menu. With
Q
press
SETUP
Menu Language English
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
Use B or b to highlight the position required
suggest
ATV Manual Tuning
Pos. Channel Station
1
2
3
4
5
6
7
8
Different
Press Q to select. If the channel is set to skip,
must be removed before storing.
Press c to select
required.
ATV Manual Tuning
System: I
1 A C 2 0
I
and using C or c select the
b
highlight
to select.
Pos. 0
C2
S10
C7
S40
C22
C25
C28
C30
Channel
ATV Manual Tuning
for a media recorder.
numbers may be displayed.
System
and use B or b to change if
Germany
Antenna
SETUP
and
e.g.
Skip
we
g
Each signal will show on the television, if it is not your
media recorder, press
search.
h
When your media recorder signal is found, press c to
move along to
required characters,
ATV Manual Tuning
Station: VCR
1 A C 2 0 V C R I
i
Press Q to save.
j
Repeat for each
MENU
to return to the list of channels and select the
next number to tune.
k
Press
EXIT
when you have finished.
l
To name external equipment,
o
to select o2, then select
the
SETUP
menu.
m
Press c to select
in the required characters.
Manual Settings
Label: DVD
EXT 2 A D V D
PLEASE NOTE
This television has direct channel entry if the channel
numbers are known.
Select the
Enter the
standard (terrestrial) channels or
channels and the
save.
ATV Manual Tuning
Position number
B
or b again to restart the
Station
. With B, b, C and c put in the
e.g. VCR
.
position
you want to tune or, press
e.g.
DVD on EXT 2, press
Manual Settings
Label
then using B, b, C and c put
screen in
, the
System
S
Channel
for cable
number. Press Q to
from
Step 3
, then C for
.
e
Then press c to select
f
Press B or b to begin the search. The search symbol
will flash.
ATV Manual Tuning
Search:
1 C 2 0 IA
Search
.
14
SETTING UP YOUR TV
English
Skip
To prevent certain channels from being viewed, positions can be
skipped. The remote control must be removed as the channels
will still be available using the number buttons. Channels can
then be watched as normal using the controls on the television,
but the television will not show the skipped channel positions.
a
Select
ATV Manual Tuning
b
Use B or b to highlight the position to be skipped and
press
Q
to select.
ATV Manual Tuning
Pos. Channel Station
1
C2
2
S10
C7
3
4
S40 ABC1
5
6
C25
7
C28
8
C30
c
Press c to select
d
Use B or b to turn
Press
8
ATV Manual Tuning
Skip: On
Q
on the screen indicates a skipped position.
1 A C 2 0 I
Skip
.
.
Skip
from the
on.
ABC1C22
SETUP
menu.
Sorting positions
Channels may be moved and saved to the position of your
a
Select
ATV Manual Tuning
b
With the list of channels now showing use B or b to
highlight the channel you want to
The selected channel will be moved to the right of the
screen.
ATV Manual Tuning
Pos. Channel Station
2
3
4
5
1
6
7
8
c
Use B or b to move through the list to your
position. As you do so the other channels will move to
make room.
d
Press C to save your move.
Repeat as necessary, then press
S10
C7
C40
C22
C2
C25
C28
C30
choice.
from the
move
ABC1
ABC1
EXIT
SETUP
and press c.
preferred
.
menu.
e
Press
MENU
and repeat from
cannot
individually
be selected by
Each position has to be
Skip
off, repeat the procedure for each position.
Skipped positions
or by the controls on the television, but
accessed by the number buttons on the remote
control.
Step 2
or press
selected. To turn
can
EXIT
PU and
still be
.
Pu
15
SETTING UP YOUR TV
DTV Manual Tuning
English
NOTE:
This feature varies depending on the
setting.
Manual Tuning
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel
a
Select
DTV Manual Tuning
and press
DTV Manual Tuning
Signal Strength
Quality
Channel
b
Enter the multiplex number using the number buttons
or use
C
c
Highlight
will automatically search for that multiplex.
DTV Manual Tuning
Pos.New TypeName
40
51
When the multiplex is found any channels that are not
currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
is known.
Q
.
WEAK
or c to adjust the number up or down.
Start Scan
0 New Channels - Total 6
ABC ONE
1
2
ABC TWO
7
ABC THREE
ABC NEWS 24
ABCi
from the
GOOD 85%
Start Scan
, then press Q. The television
Ant/Cable In
SETUP
menu
STRONGAVERAGE
76%
13
DTV Settings
The channel order may be changed to suit your personal
preference.
a
Select
Q
.
b
Select
DTV Settings
Channels
Channel Options
Subtitle and Audio
PIN Setting
Parental Control
Local Time Setting
Auto Channel Update
DVB Character Set
c
With the list of channels showing use b or B to
highlight the channel you want to
Channels
Pos. Name
30
40
51
d
Use b or B to move through the list to your
position. As you do so the other channels will move to
make room.
Channels
DTV Settings
Channels
ABC ONE
1
2
ABC TWO
7
ABC THREE
CABC Channel
ABC NEWS 24
ABCi
from the
and press Q.
SETUP
menu and press
11:51
Off
Standard
move
and press c.
TV
preferred
d
Repeat as necessary. Press
Manual Tuning for DVB-C
When
Ant/Cable In
items are as follows:
Frequency
Modulation
options
Symbol Rate
the manual scan
– input a specific frequency to be scanned
– choose from one of five QAM modulation
– input a specific baud rate (KS/s) to be used for
EXIT
is set to
Cable, DTV Manual Tuning
to finish.
16
e
Press C to save your move. Repeat as necessary, then
press
EXIT
.
To renumber for the highlighted channel, press the
RED
button on the remote control.
Edit channel number using number buttons and press
Q
.
Channels
Pos. Name
1
2
7
30
40
5- - -
ABC ONE
ABC TWO
ABC THREE
CABC Channel
ABC NEWS 24
ABCi
TV
Auto Channel Update
If the
Auto Channel Update
standby mode, Digital Tuning is automatically executed and
any new channels are saved.
a
Select
DTV Settings
Q
.
b
Press b to select
c
to select On.
is set to On, when the TV is in
from the
SETUP
menu and press
Auto Channel Update
and use C or
DVB Character Set
This feature allows you to manually set the character set
(
Standard
C or DVB-T channels.
a
= Table 0 or
Select
Q
.
West
DTV Settings
= Table 5) to be used for DVB-
from the
SETUP
menu and press
SETTING UP YOUR TV
Location setting
Home
or
Store
SETUP
Home
mode.
menu.
or
Store
You can select either
recommended for normal home use. Select
a television for displaying in a shop, etc.
a
Select
Location
from the
b
Press C or c to select
Home
Store
.
is
when using
English
b
Press b to select
to select
This is a
digital
of both
digital
lifetime of this set it is very likely that
be switched off to allow for more new
This ‘switch-off’ will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new
disruption.
DVB Character Set
Standard
or
West
Analogue
television which is integrated to allow the use
and
analogue
digital
switch-off
services. However, during the
services can be viewed without
.
analogue
digital
and use C or c
services will
services.
17
CONTROLS AND FEATURES
General controls
English
Selecting positions
To select a position, use the numbered buttons on the remote
control.
Positions can also be selected using
To display on-screen information
stereo/mono signal, press . Press again to cancel.
The Time Display –
The time display facility allows the current (text service) time to
Press
see a time display from the broadcaster. It will remain on
screen for about 5 seconds.
NOTE:
be seen on the television screen.
D
whilst watching a normal television broadcast to
This display may not be available in some cases.
PU and
Pu.
i.e.
position, input mode or
analogue
only
Stereo and Bilingual transmissions
For ATV programmes
If stereo or dual language broadcasts are transmitted, the word
Stereo or Dual will appear on the screen each time positions are
changed, disappearing after a few seconds. If the broadcast is
not in stereo, the word Mono will appear.
Stereo…
Press s to select
Bilingual…
transmitted, the word
required programme number and if the word
press
Bilingual transmissions are rare. If they are
s
to select
For DTV programmes
For stereo or dual mono broadcasts, press s and use C or
c
to select settings.
Mode Display Pressing
Stereo Stereo S Left S Right
Dual mono Dual 1
Mono –
Multichannel –
Stereo
or
Mono
Dual
will be displayed. Choose the
Dual 1, Dual 2
or
Mono
S
Dual 2 S Dual
.
Dual
.
c
appears
Quick Menu
Quick Menu
Picture Mode, Picture Size, More Information, Sleep
Timer
Press
select the option.
Quick Menu
Picture Mode AutoView
Picture Size
Favourites
More Information
Sleep Timer
Media Player
Headphone Level
System Information
NOTE: Quick Menu
current mode.
Mode Quick menu item Description
When viewing a
TV programme or
pictures from the
external input
When using EPG Genre Colour See page 33.
When using
Media Player
helps you access some options quickly, such as
etc.
QUICK
to display the
Quick Menu
0
items are different depending on the
Picture Mode See page 23.
Picture Size See page 21.
Channels/Favourites See page 35.
More Information See page 33.
Sleep Timer See page 31.
Media Player See page 28.
Headphone Level See page 20.
System Information See page 37.
EPG Update/
Cancel EPG Update
Interval Time See page 29.
Repeat See page 29.
and use B or b to
Super Live
00:00
See page 33.
s
For multi-audio track broadcasts, press
change the audio language (see ‘Audio language’ on
page 36).
repeatedly to
18
CONTROLS AND FEATURES
English
Sound controls
Volume controls and mute sound
Volume
Press Y or y to adjust the volume.
Sound Mute
Press once to turn the sound off and again to cancel.
Dual
If a programme or film is being broadcast with a soundtrack in
more than one language, the
a
Press
MENU
b
Use b to highlight
between
Dual 1
SOUND
Dual Dual 1
Bass
Treble
Balance
Advanced Sound Settings
Stable Sound
Dynanic Range Control
Audio Level Offset
Bass, Treble and Balance
The sound controls are accessible in
a
Select the
SOUND
b
Press b to highlight
or
c
to change the setting.
DUAL
between them.
and C or c to select
or
feature allows selection
Dual
then press C or c to choose
Dual 2
.
0
0
0
digital
modes.
menu.
Bass, Treble
SOUND
Off
On
and
or
Balance
.
analogue
and C
Advanced Sound Settings
Stereo Extension, Voice Enhancement,
Boost
help to create an enhanced surround sound experience
with deep, rich bass from stereo sound sources. Your TV’s
audio will sound fuller, richer, and wider.
a
In the
SOUND
Sound Settings
b
Press b to highlight
c
to select On or
Advanced Sound Settings
Stereo Extension
Voice Enhancement
Dynamic Bass Boost
c
Press b to highlight
C
or c to select On or
d
Then press b to highlight
using
(
Off, Low
menu, press b to highlight
then press Q.
Stereo Extension
Off
.
Voice Enhancement
C
or c select the desired bass expansion level
or
High
).
Stable Sound
The
Stable Sound
speakers preventing the extreme changes in volume that can
occur when channels are changed or a programme switches to
a
Select the
b
Use b to highlight
to select
feature limits high volume levels on the TV
a commercial.
SOUND
menu.
Stable Sound
On
or
Off
.
and
Off
.
Dynamic Bass Boost
®
then press C or c
Dynamic Range Control
This feature allows control of audio compression for some
digital TV programmes except MPEG-1 and MPEG-2 audio.
a
In the
SOUND
menu, press b to highlight
Range Control
.
Dynamic Bass
Advanced
then press C or
Off
On
High
then press
and
Dynamic
b
Press C or c to select On or
NOTE:
If the
features are both set to
19
Stable Sound
On
Off
.
and
Dynamic Range Control
, each effect may not be noticeable.
CONTROLS AND FEATURES
English
It tends to change into loud volume when switching from a DTV
5.1ch to a DTV 2ch, an ATV or an external input. Using the
Audio Level Offset
a
b
c
d
NOTE:
• The available item alters depending on the current input
source. For example, while watching the DTV 2ch
programme, only the
items are greyed out in the menu. It helps you to adjust
easily responding to each condition.
• When watching the DTV 5.1ch programme, this feature is
not available.
Audio Level Offset
feature reduces these volume differences.
Set the volume level usually used when watching DTV
5.1ch programme.
Tune to a channel which is DTV 2ch or ATV, or an
external input.
In the
SOUND
Level Offset
Press b to highlight an option, then use C or c to
adjust the volume level.
Audio Level Offset
DTV 2ch
ATV
External Input
menu, press b to highlight
and press Q.
-5
0
0
DTV 2ch
is available and other two
Audio
Headphone Settings
This setting is used to set the sound output while connecting the
headphone.
Audio description
Audio description is an additional narrative sound track for
visually impaired people to understand and enjoy the story line
If this function is activated by pressing
programme has such signal, the word
You can select sound from speakers or headphone as you
a
From the
and press
b
Highlight
select
On
Audio Description
Audio Description
Mixing Level
Speaker Out
c
To adjust the level of the audio description sound to
the main sound, highlight
c
.
d
Highlight
or
Off
.
On:
sound from both the headphone and speakers.
Off:
sound from the headphone.
See "Headphone Settings" to adjust the headphone
sound.
more fully.
the Channel Banner.
desire.
SOUND
menu select
Q
.
Audio Description
.
Mixing Level
Speaker Out
then press C or c to select On
AD
button, when the
AD
will be displayed in
Audio De scription
then press C or c to
On
50
Off
and use C or
Speaker
Link
On Sound comes out
Off Sound comes out
a
In the
Headphone Settings
b
Press b to highlight
select
c
If you select
and using
Headphone Settings
Headphone Speakers
2
– + is available.)
(
(Headphone level
menu is available.)
SOUND
menu, press b to highlight
On
or
Speaker Link
Headphone Level
Speaker Link
Off
.
Off
, then highlight
C
or c to adjust the headphone sound.
No sound
Sound comes out
(
2
– + is available.)
then press Q.
and use C or c to
Headphone Level
50
Off
20
CONTROLS AND FEATURES
Widescreen viewing
Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.
Use this setting when watching a
widescreen DVD, widescreen video
tape or a 16:9 broadcast (when
WIDE
available). Due to the range of
widescreen formats (16:9, 14:9,
20:9 etc.) black bars may be visible
on the top and bottom of the screen.
English
4:3
SUPER LIVE
CINEMA
SUBTITLE
Use this setting to view a true 4:3
broadcast.
This setting will enlarge a 4:3 image
to fit the screen by stretching the
image horizontally and vertically,
holding better proportions at the
centre of the image. Some distortion
format’ films/video tapes, th is setting
will eliminate or reduce the black
bars at all sides of the screen by
zooming in and selecting the image
When subtitles are included on a
letterbox format broadcast, this
setting will raise th e picture to ensure
that all the text is displayed.
may occur.
When watching ‘all sides panel
without distortion.
SUBTITLE
14:9
Use this setting when watching a
14:9 broadcast.
21
CONTROLS AND FEATURES
English
NATIVE
PC NORMAL
PC WIDE
Dot by Dot
Press
QUICK
and highlight
B
and b to highlight the required format and Q to select.
Use
AV format PC format
Picture Size
Wide
Super Live
Cinema
4:3
Subtitle
14:9
Native
Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public
display or commercial gain may infringe on copyright laws.
This setting will show the picture
without over scan, i.e. WYSIWYG.
This option is only available when
watching video signal source via
This setting will show the picture
without over scan, i.e. WYSIWYG.
This option is only available when
watching PC signal source via HDMI
This setting will show the picture
without over scan and side panel.
This option is only available when
watching PC signal source via HDMI
“Dot by Dot”
Depending on the input signal format,
the picture is displayed with side
panels and/or bars at the top and
bottom (i.e. VGA input source).
Picture Size
Picture Size
HDMI.
or PC terminal.
or PC terminal.
is a non-scaling display.
, then press Q to display the list of available widescreen formats.
PC Normal
PC Wide
Dot by Dot
22
CONTROLS AND FEATURES
English
Picture controls
Most of the picture controls and functions are
available in both
PLEASE NOTE: features not available will be greyed
.
out
The picture position may be adjusted to suit personal preference
and can be particularly useful for external inputs.
a
In the
highlighted.
SETUP
Country Germany
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
Picture Position
b
Press Q to view the options available for the picture
format that has been selected.
c
Press B and b to select an option, then C or c to
adjust the settings.
The options alter depending on currently selected
widescreen format and the input signal.
Cinema
In
digital
Picture Position
SETUP
menu press b until
:
and
analogue
Picture Position
Antenna
modes.
is
Picture Mode
This television offers the choice of personalising the picture
AutoView, Dynamic, Standard, Movie, Store, Game
PC
are preset options and affect many features/settings within
NOTE:
• Because the
settings based on ambient light conditions and input signal
content, the
menus are greyed out when it is selected.
•
Store
•
Game
aerial input). When you select
widescreen formats will be selected.
•
PC
mode.
a
b
NOTE:
only. You can select a different picture mode for each input.
AutoView
Auto Brightness Sensor
mode is only available when
mode is available in external input mode (other than
mode is available in RGB/PC input mode or HDMI input
In the
PITCURE
PICTURE
Picture Mode AutoView
Reset
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Press C or c to select the picture mode you prefer and
press
Q
.
The picture mode you select affects the current input
style.
the television.
mode automatically adjusts picture
and
Expert Mode
Location
is set to
Game
mode, suitable
menu press b to select
Picture Mode
60
95
0
0
0
0
and
Store
.
.
Picture Position
Horizontal Position
Vertical Position
To return to the original factory settings select
the
Picture Position
0
0
Reset
menu and press Q.
Reset
Picture preferences
You can customise current picture mode settings as desired. For
example, while selecting "
following items, such as
Colour, Tint, Sharpness
in
items, your new setting is saved as the same name "
a
In the
PICTURE
Backlight, Contrast, Brightness, Colour, Tint
Sharpness
b
Press C or c to adjust the settings.
Dynamic,
Backlight, Contrast, Brightness
and the
menu press b to select either
and press Q.
" if you change the
Advanced Picture Settings
23
Dynamic.
or
,
"
CONTROLS AND FEATURES
English
This feature resets all picture settings to the factory settings
NOTE:
If any picture settings have not been changed,
not available.
a
In the
PICTURE
press
Q
b
A confirmation message will appear. Press C or c to
select
Yes
Reset
except
Picture Mode
menu press b to select
.
and press Q.
.
Reset
Reset
and
c
Press C or c to select
Brightness
as required.
is
d
Press Q to return to the previous menu.
To return to the factory settings select
Q
, then press B or b to adjust the settings
.
Hue, Saturation
Hue Saturation Brightness
0Red 0 -1
or
Reset
and press
3D Colour Management
When
3D Colour Management
Colour Adjustment’ feature to become available.
a
In the
PICTURE
Picture Settings
b
Press b to select
Advanced Picture Settings
3D Colour Management On
Base Colour Adjustment
Colour Temperature
Auto Brightness Sensor Settings
Active Backlight Control
Black/White Level
Static Gamma
Noise Reduction
c
Press C or c to select On or
is set to On it allows the ‘Base
menu press b to select
and press Q.
3D Colour Management
10
0
Off
, then press Q.
Advanced
.
On
Base Colour Adjustment
The
Base Colour Adjustment
individual colours to suit personal preference. This can be useful
a
b
when using an external source.
In the
Advanced Picture Settings
select
Base Colour Adjustment
Press B or b to select an option, then press Q to
move to the adjustment window.
feature allows the adjustment of
menu press b to
, then press Q.
Colour Temperature
Colour Temperature
the picture by increasing the red or blue tint.
a
In the
select
b
Press C or c to select
(0–10).
Colour Temperature
Colour Temperature 5
Red -Offset
Green -Offset
Blue -Offset
Red -Gain
Green -Gain
Blue -Gain
Reset
c
Press B or b to select an option you want to adjust,
then press
d
Press Q to return to the previous menu.
To return the colour temperature settings to the factory
defaults, select
NOTE:
If
Picture Mode
Colour Temperature
increases the ‘warmth’ or ‘coolness’ of
Advanced Picture Settings
Colour Temperature
C
or c to adjust the settings.
Reset
is set to
only.
and press Q.
Colour Temperature
0
0
0
0
0
0
and press Q.
AutoView
menu press b to
, you can adjust
setting
Base Colour Adjustment
Green
Blue
Yellow
Magenta
Cyan
Hue
0Red
000
000
000
000
000
Saturation
Reset
Brightness
00
24
CONTROLS AND FEATURES
English
Auto Brightness Senser Settings
When
Auto Brightness Senser Settings
automatically optimise the backlighting levels to suit ambient
a
In the
select
Q
.
b
Press C or c to select On and press Q.
Auto Brightness Sensor Settings
Auto Brightness Sensor
Backlight Adjustment Pro
c
Press b to select
press
d
The
Backlight Adjustment Pro
Press
e
Press C or c to select the point and press B or b to
adjust the level.
Backlight Adjustment Pro
Control
Level
f
Press Q to fix the adjustment.
To cancel the adjustment when selecting a point, select
Cancel
To return the adjustments of all points to the factory
defaults, select
light conditions.
Advanced Picture Settings
Auto Brightness Senser Settings
Q
Q
100
Backlight Adjustment Pro
.
again to display the adjustment window.
Backlight Control Level
0
and press Q.
Ambient Light
Reset
and press Q.
is activated it will
menu press b to
and press
On
and
window will appear.
48
Cancel
Reset
Active Backlight Control
When
automatically optimise the backlighting levels for dark scenes.
a
b
Active Backlight Control
In the
Advanced Picture Settings
select
Active Backlight Control
Press C or c to select On or
is activated, it will
menu press b to
.
Off
.
Black/White Level
Black/White Level
a
In the
select
b
Press C or c to adjust the level. The effect depends on
the broadcast and is most noticeable on dark colours.
increases the strength of dark areas of the
picture to improve the definition.
Advanced Picture Settings
Black/White Level
menu press b to
.
Static Gamma
The static gamma feature allows you to adjust the levels of black
a
In the
select
b
Press C or c to adjust the level.
in the picture.
Advanced Picture Settings
Static Gamma
.
menu press b to
MPEG NR – Noise Reduction
When watching a DVD the compression may cause some words
or picture elements to become distorted or pixelated.
MPEG NR
Using the
a
In the
select
b
Press b to select
Noise Reduction
MPEG NR
DNR
c
Press C or c to select
suit your preference.
feature reduces this effect by smoothing
out the edges.
Advanced Picture Settings
Noise Reduction
and press Q.
MPEG NR
Low, Middle, High
menu press b to
.
Low
Auto
or
Off
to
DNR – Digital Noise Reduction
DNR
enables you to ‘soften’ the screen representation of a
weak signal to reduce the noise effect.
a
Select
DNR
from the
Noise Reduction
b
Use C or c to select
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
Low, Middle, High, Auto
menu.
or
Off
.
25
CONTROLS AND FEATURES
English
The
Resolution+
a
In the
select
b
In the
Resolution+
Resolution+
Level
c
Press b to highlight
the level.
NOTE:
• This feature may not work properly depending on the
content.
• Adjustable range varies according to the Picture Mode you
set.
• The noise may appear on the image depending on the
device connected to the TV (e.g. a device with specific
enhancer function).
Resolution+
feature allows you to adjust the levels for your
desired picture settings.
Advanced Picture Settings
Resolution+
Resolution+
and press Q.
field, select On.
Level
menu, press b to
On
3
, then press C or c to adjust
Cinema Mode
If there are lines or jagged edges in the film or programme
being viewed, selecting
a
In the
select
Cinema Mode
smoothing out the picture.
Advanced Picture Settings
Cinema Mode
can help correct this by
.
menu press b to
Expert Mode
c
Red
Green
Blue
Colour
Tint
Press b to select
c
to adjust.
Colour
or
Tint
On
On
Off
50
50
, and then press C or
Resetting the advanced picture settings
This feature enables to reset the current
a
In the
select
b
Press Q.
to the default values.
Settings
Advanced Picture Settings
Reset
.
Advanced Picture
menu press b to
b
Press C or c to select On or
NOTE:
When a DVD with subtitles is being played this
mode may not work correctly.
Off
.
Expert Mode
This feature enables to turn on/off the colours red, green and
blue individually for adjusting each colour more accurately.
NOTE:
This feature is not available when
AutoView
to
a
b
.
In the
Advanced Picture Settings
select
Expert Mode
Press B or b to select either
want to adjust and press
Select
Off
on other two colours.
and press Q.
Picture Mode
menu press b to
Red, Green
C
or c to select On.
or
Blue
is set
you
26
CONTROLS AND FEATURES
English
Control Visualization
This feature displays the brightness histogram and control curve
a
In the
Visualization
will appear.
Number
Of
Pixels
Output
b
Press
of each scene.
PICTURE
menu, press b to select
and press Q. The histogram window
Control Visualization
Distribution
Brightness
Control Curve
Input
RETURN
to return to the previous menu.
Control
Automatic Format (Widescreen)
When this television receives a true Widescreen picture and
Auto format
Widescreen format irrespective of the television’s previous
a
b
is On, it will automatically be displayed in
setting.
Press
MENU
menu.
Press b to highlight
select
and C or c to select the
Off
Auto Format
.
On
or
PREFERENCES
, then C or c to
4:3 Stretch
When
4:3 Stretch
changes 4:3 programmes into full screen picture.
a
In the
Stretch
b
Press C or c to select On or
is activated the size switching system
PREFERENCES
.
menu press b to highlight
Off
.
Blue Screen
When
Blue Screen
sound will be muted on analogue channels and external input
a
In the
Screen
b
Press C or c to select On or
is selected the screen will turn blue and the
modes when no signal is received.
PREFERENCES
.
menu press b to highlight
Off
.
Side panel adjustment
The
Side Panel
side of the screen when in 4:3 or 14:9 format. This helps prevent
image retention of the band and can also make viewing in
a
b
feature lightens or darkens the band on each
bright or dark conditions more comfortable.
In the
PREFERENCES
Panel
.
Press C or c to adjust (1-3).
menu press b to select
Picture still
This feature is used to hold a still image on the screen.
Press r to hold an image on the screen, press r
again to cancel.
4:3
Blue
Side
PREFERENCES
Teletext
Panel Lock
Auto Format
4:3 Stretch
Blue Screen
Side Panel
TOSHIBA Illumination
Auto
Off
On
Off
On
1
On
27
CONTROLS AND FEATURES
Enjoying Photo through USB
English
port
The Photo Viewer allows you to playback JPEG files from a USB
storage device. Entire files can be viewed individually in a
Single View or Slideshow mode, or as thumbnails in a Multi
View overview mode.
Photo Viewer specifications
Data type: JPEG Exif ver2.2
File format: DCF ver1.1
Maximum photo size: 9 MB
Maximum number of files: 2000 / Folder
Maximum photo resolution: 16384
PLEASE NOTE
• Gently insert the USB device into the port and do not
remove while viewing Media Player.
• USB device: USB Mass Storage Class device (MSC)
• Connectivity is not guaranteed for all devices.
• Connect the USB device to the TV directly.
• Do not use a USB hub.
• You must obtain any required permission from
copyright owners to use copyright content. Toshiba
cannot and does not grant such permission.
5
16384 pixels
To open Photo Viewer
There are two kinds of methods to open Photo Viewer as
follows:
Automatically open
a
Please confirm the
menu is set to
b
Gently insert a supported USB storage device to the
USB port on the side of the TV. The prompt will appear.
NOTE:
If inserting and removing the USB connector
frequently, the prompt may not appear.
c
Press C or c to select
Player
menu will appear. When you select No,
nothing happens.
USB device was connected to TV. Do you want to open
Media Player?
NOTE:
The prompt will disappear after about 6 sec.
Open from Menu
a
Press
MENU
menu.
b
Press b to select
Auto Start
On
. See below.
and C or c to select the
Media Player
in the
Yes
, then press Q. The
No Yes
then press Q.
Media Player
Media
APPLICATIONS
c
Press b or B to select
Media Player
Photo
Auto Start On
d
Press b or B to select active device if the selection
window appears then press
open.
NOTE:
• The viewer will also open even if there are no photo contents
at all.
• While the Photo Viewer is active, the on-screen menus
cannot be displayed.
Photo
then press Q.
Q
. The Photo Viewer will
28
CONTROLS AND FEATURES
English
Viewing photo files
There are three types of view modes.
Multi View
This view allows you to search for photos in the grid.
These pictures are displayed by use of thumbnail data in each
picture.
Photo
/Folder/select Folder or File
1/54
E05265464.jpg
The initial highlighted position will be on the top left thumbnail
in the Multi view.
a
Press B b C c to move the highlight in one window.
If all of the photo contents will not fit in one screen,
when pressing
will move to the previous page. At this time, the
highlight shall be the content at the bottom right.
Conversely, when pressing
thumbnail, the screen will move to the next page. At
this time, the highlight shall be the content at the top
left.
PU
Pu buttons can be used to page up/down the
photo list when there are more contents than will fit
onto one screen. When the
the highlight shall be the content at the top left of
Previous/Next list.
b
When you select a folder, press Q to move to next
layer. Press
OK P RETURN
C
RETURN
Page BackSelect
at the top left thumbnail, the screen
c
at the bottom right
PU
Pu buttons pressed,
to move back to previous layer.
Single View
In this view mode, the only contents it locates on the same
directory shall be played. This view allows you to change the
photo content manually. When moving from Multi view to the
single view, the selected photo content shall be played.
a
Press c to view the next photo content. Press C to view
the previous photo content.
b
Press B to rotate the image 90° clockwise. Press b to
rotate the image 90° counterclockwise.
c
Press to display file status information (content
number, photo title, shooting date and time,
resolution etc.). The information will be removed by
time-out (about 6 sec) or pressing again.
Slideshow
This view allows you to watch the slide show of the photos. In
this view mode, the only contents it locates on the same
directory shall be played.
a
To start slideshow, press Q in the single view mode.
b
Press C / c to view the previous/next photo content.
c
Press B or b to rotate the photo.
d
Press to display file status information. The
information will be removed by time-out (about 6 sec)
or pressing again.
To set Interval time and Repeat setting:
a
Press
QUICK
to open the
Quick Menu
Interval Time 3sec
Repeat
Quick Menu
.
On
c
Press Q to mo ve t o t he sing le vi ew m od e an d p lay t he
selected photo content.
b
Press B or b to select either
Repeat
.
c
Press C or c to adjust the setting and press Q.
To close the Photo Viewer
a
Press
EXIT
channel or external input.
29
Interval Time
. The television will return to the last viewed
or
CONTROLS AND FEATURES
Other features
English
Panel lock
Panel lock
a
When
buttons on the television are pressed.
is pressed the television will switch off and can only be
brought out of standby by using the remote control.
disables the buttons on the television. All buttons on
the remote control can still be used.
From the
PREFERENCES
choose
On
or
PREFERENCES
Teletext
Panel Lock
Auto Format
4:3 Stretch
Blue Screen
Side Panel
TOSHIBA Illumination
Panel Lock
is On, a reminder will appear when the
Off
using C or c.
menu select
Panel Lock
Auto
Off
On
Off
On
1
On
If the standby button
TOSHIBA Illumination
You can set the illumination mode of the TOSHIBA logo located
a
b
on the front panel to
In the
PREFERENCES
TOSHIBA Illumination
Press C or c to select either On or
On
or
menu, press b to select
.
Off
Off
.
.
The timers
Programme Timers –
This feature will set the television to go to a specific channel at
a certain time. It can be used to view a particular programme,
or by setting the mode to daily or weekly, can be used to view a
and
a
Press
menu.
APPLICATIONS
b
Press b to select
c
Press b if necessary to select an open timer position,
then press
on screen.
d
Press B and b to go through the list adding the details
of the programme by using the number buttons and
and
Edit Timer
series of programmes.
MENU
and C or c to select the
Media Player
EPG
Programme Timers
On Timer
Sleep Timer 00:00
Programme Timers
Q
. The
c
to make selections.
Timer Type
Channel
Date
Start Time
End Time
Repeat
Subtitle
0 - 9
Enter Number Save Timer Back
digital
Edit Timer
OK RETURN
only
APPLICATIONS
, then press Q.
menu will now appear
10:50 Tue, 26 Apr
Reminder
30 CBBC Channel
Tue, 26 Apr 2009
10:49
11:49
Once
Off
C
e
When all the details have been entered press Q to
save the timer.
The ORANGE/RED programme timer indicator on the
front of the television will be lit (see page 45 for
details).
PLEASE NOTE:
information screen will appear offering the option of watching
or cancelling the programme. The menus and other channels
will not be available during the timed programme unless the
programme timer is cancelled. The programme timer you set
is not performed when the TV is turned off with the
switch.
Wh en a ti med pr ogr am me is a bou t to st art , an
30
!
POWER
CONTROLS AND FEATURES
English
On Timer
The feature allows you to set the television to turn on
automatically in a preset channel at a certain time of day or
after a certain length of time. While
green on timer indicator on the front of the television is lit.
a
In the
APPLICATIONS
Timer
and press Q.
b
Press B or b to select
press
C
or c to select On.
On Timer
Enable On Timer
Enable DTV Clock
Power On Time
Repeat
Input
Channel
Volume
Time until Power On
c
Press b to select
C
or c to select On or
d
Press B or b to go through the list adding the details
of the on timer by using the number buttons and
and
c
to make selections.
Power On Time
the time you prefer with the number buttons.
Repeat
(only for DTV Clock On mode): Select the
desired on timer operation (
Fri
,
Mon-Sat, Sat-Sun
Input:
Select video input source (ATV, DTV, EXT 1, EXT
2, EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC).
Channel:
Set the channel when the television turns
on.
NOTE:
When any external input is selected in the
Input
field, this feature cannot be selected.
Volume:
Set the volume when the television turns on.
Time until Power On
Set the time you prefer until the TV turns on from now
with the number buttons (maximum of 12 hours and
50 minutes).
On Timer
is set to On, the
menu, press b to select
Enable On Timer
Enable DTV Clock
Off
.
(only for DTV Clock On mode): Set
Once, Everyday, Mon-
).
(only for DTV Clock Off mode):
, and then
On
On
00:00
Once
DTV
12 ABC
20
00:00
, and then press
On
C
The television can be set to turn itself
a
In the
APPLICATIONS
Timer
. Use the number buttons to set the required
time. For example, to switch the television off in one
and a half hours enter 01:30, or press
increase/decrease in steps of 10 minutes.
b
Press
EXIT
c
To cancel the
setting.
Sleep Timer
of time.
to finish.
Sleep Timer
Off
after a certain length
menu, press b to select
c/C
to
, enter zero in the above
Sleep
To cancel the on timer
a
In the
On Timer
menu, select
b
Press C or c to select
Off
.
Enable On Timer
31
CONTROLS AND FEATURES
Digital on-screen
English
information and Programme
Guide
When viewing in
information and programme guide provide access
to programme details for all available channels.
a
Press , the information screen will appear giving
details of the channel and programme currently being
viewed.
4 CANAL+
English
b
Press B or b to select the “
information guide.
c
To record the following programme, select "
press
Now
SD 16:9
Next
Also
Q
. The
digital
mode, the on-screen
Information
City Hospital
Edit Timer
10:34 Tue, 26 Apr
10:00- 10:49
News
10:49- 11:49
Now
”, “
Next
” or “
Next
screen will appear.
15 min left
Also
" and,
On-screen Information icons
Service info Service type
Audio info Mono
Audio/Subtitle info For Hard of Hearing
Event info HD, SD Video format (HD, SD)
Timer info Recording
”
Icon Description
D
+
D
16:9, 4:3 Video Aspect
Subtitle (Single, Multi)
0, 4 – 18 Parental rating
(TV, Radio, TEXT)
Skip
Stereo
Dual mono
Multichannel
Dolby Digi tal
Dolby Digital+
Teletext
Multi-audio track
Encrypted
Reminder
Edit Timer 10:50 Tue, 26 Apr
Tue, 26 Apr 11:00
30 CBBC Channel
Seven Wonder4
Timer Type
Start Time
End Time
Repeat
Subtitle
Edit Save Back
d
The details of the programme will have been added to
the timer. Press
Q
50
OK RETURN
to save.
To indicate that a Recording Timer has been set, a
clock icon will be displayed in the
Next
of the information screen. A check mark will appear if
the timer is a Reminder Timer.
e
Press b to select
Also
. Details of programmes that
have started on other channels will be provided. Use
C
or c to change the display contents.
Recording
10:49
11:49
Once
On
and
Also
fields
32
CONTROLS AND FEATURES
English
Guide
a
Select the on-screen guide by pressing
guide screen will appear highlighting details of the
channel and programme currently being viewed. This
may take a few moments to appear.
Thu
6
TV
18:00 18:30 19:00 19:30 20:00
09
6 M6
9 W9
11 NT1
31 PARIS PREMIERE
34 AB1
800 FlowerGd 6Mbs
801 FlowerGd 4Mbs
802 FlowerGd 2Mbs
804 Codec 4:3
806 ITV1
807 ITV3
808 ITV2
809 ITV4
33
LES SIM...
09
LES SIMPSON
10
SUMMERLAND
08
Nicky La...
06
MA SORCIE...
00
Evamag
21 jump street27Jerry Springer Show14City guys54L...
You can switch the time scale to 1.25 or 2.5 hours by
pressing the
NOTE:
(TV, Radio, Text). Pressing the
switch the service type.
b
Press C or c for information on other programmes
GREEN
Channels are displayed in group of service type
scheduled for the channel selected. To highlight the
first programme in the genre grid, press the
button.
c
For details of other programmes currently available,
press
B
and b to scroll up and down the channel list.
As channels are selected details of the programme
currently being broadcast will appear. Press
view information for future programmes.
d
For information on a highlighted programme press
. To set the timer for that programme, press the
BLUE
button to bring up the
menu.
NOTE:
In order for the recording operation to work
properly, the media recorder must be set to the same
time as the TV. Regarding the process for recording,
please refer to the owner’s manual of the recording
equipment.
e
Press Pu to advance to the next page, press PU to go
back to the previous page.
06
LES SIM...
Street fight...32Dragon B...59Dragon B...24K 2000
TOP MODEL
53
SUMMERLAND
39
HAPPY DAYS39HAPPY DAYS
button.
ATV/DTV
Programme Timers
GUIDE
, the
10:50 Tue, 6 Apr
44
LES SIM...
48
17
button will
RED
C
or c to
Genre selection/searching
From the guide screen, you can use the genre selection and
a
Press the
b
Press b or B to highlight
Menu
Genre Colour Setup
Movies
c
With the focus on a particular genre, press the desired
colour key to assign. Four colours will be available to
set. Press
d
Press the
screen.
Genre Search
Movies
34 AB1
31 PARIS PREMIERE
11 NT1
9 W9
34 AB1
11 NT1
PARIS PREMIERE
31
9 W9
11 NT1
31
PARIS PREMIERE
11 NT1
11 NT1
34 AB
e
Press C or c to select the genre. Programmes listed
will change for the new genre. Press
highlight a particular programme.
f
When a current programme is selected, pressing Q
will tune to that programme. When a future
programme is selected, pressing
Timer
g
For information on a highlighted programme press
h
To exit the
screen, press the
search features.
QUICK
button from the guide screen.
Genre Colour
, then press Q.
Colour Setup
RETURN
to go back to the guide screen.
YELLOW
button to access the
Hard Rain
Red Corner
The Lawnmower Man
A Vow to Kill
Parenthood
Body and Soul
The Nun’s Story
Red Corner
The Real Blonde
Critters
Indiana Jones and the Temple of Doom
The jackal
Coup De Ville
RETURN
Wed,27 Apr 0:15- 1:45
Wed,27 Apr 22:15- 23:55
Thu,28 Apr 1:20- 3:00
Fri,29 Apr 1:30- 3:00
Sat,30 Apr 0:45- 2:40
Sat,30 Apr 1:15- 3:00
Sat,30 Apr 15:00- 17:30
Sat,30 Apr 23:20- 1:15
Sun,1 May 0:40- 2:00
Sun,1 May 0:40- 2:20
Sun,1 May 21:10- 23:20
Sun,1 May 23:20- 1:15
Mon,1 May 1:10- 3:00
B
Q
menu.
.
Genre Search
YELLOW
will open the
and go back to the guide
button.
in the
Quick
Back
Genre Search
10:50 Tue, 6 Apr
or b to
Edit
33
CONTROLS AND FEATURES
Digital settings – parental
English
control
In order to prevent viewing of unsuitable films and
programmes, channels and menus can be locked.
These can then only be accessed with a security
digital
code PIN when in
mode.
Setting the PIN
a
Press
MENU
and c to select the
b
Use b to select
SETUP
Menu Language English
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
c
Press b to highlight
DTV Settings
Channels
Channel Options
Subtitle and Audio
PIN Setting
Parental Control
Local Time Setting
Auto Channel Update
DVB Character Set
DTV Settings
PIN Setting
SETUP
menu.
then press Q.
Germany
Antenna
then press Q.
11:51
Off
Standard
Parental Setup
The Parental Control feature allows you to block programmes
according to their rating levels. If a PIN has been set, you will
need to enter it before adjusting the level.
a
In the
DTV Settings
Control
, then press Q.
b
Use C or c to choose options (
(4-17)).
Parental Control
Parental Setup None
To view blocked programmes, enter the PIN. To
reactivate the Parental Control, turn the TV off and
then on again.
menu press b to select
None
or age settings
Parental
d
Using the number buttons enter a four digit number.
Once entered you will be prompted to confirm by
entering again.
PIN Setting
New PIN:
Confirm PIN:
The PIN number is now set.
If the PIN code has been set, when
Reset TV
are executed, entering the PIN will be
necessary.
* * * *
Auto Tuning
and
34
CONTROLS AND FEATURES
English
Digital settings – Channel
Options
Selecting favourite channels
Favourite Channels
are watched most. Four lists can be created, these can be a
mixture of television, radio and text channels.
a
From the
Channel Options
Channel Options
Channel
1119
b
Press c repeatedly to select the favourite list (Fav.1-4)
c
Press B or b to select a channel position to be added.
Press
in the box as they are selected.
d
When all favourites have been selected, press
a
Press
b
Press B or b to select
c
The
Favourites 1-4. The number of favourites available
depends on how many lists have been created.
Channel List
creates a list of the
DTV Settings
and press Q.
ABC ONE
Q
to select the ones required. A tick will appear
digital
channels that
menu press b to select
Fav.
1234
Favourite Channel Lists
QUICK
to open the
Channel List
Favourites 1
6 M6
9 W9
11 NT1
31 PARIS PREMIERE
34 AB1
51 ITV1
Quick Menu
Favourites
will appear. Press C or c to select
.
and press Q.
TV
EXIT
Skip channels
This feature allows you to set channels that will be skipped when
a
b
c
d
Pu or
PU are used to tune.
From the
DTV Settings
Channel Options
Press c repeatedly to select the skipped channel list.
Press B or b to select a channel position to be
skipped. Press
will appear in the box.
Press
EXIT
.
NOTE:
Skipped channels cannot be selected by
PU but still be accessed by direct number entry (when
8
tuned a
indicate as a skipped channel).
icon will be displayed in the banner to
menu press b to select
and press Q.
Q
to select the ones required. A tick
Locking channels
Locking Channels
.
a
b
c
d
e
From the
Channel Options
Press c repeatedly to select the Locked Channel list.
Press B or b to select a channel position to be locked.
Press
in the box.
If a PIN has already been set, PIN entry will be
required to set the locked channels.
Press
From this point on, when any of the channels in the
Locked Channel
entered before they can be accessed.
stops the viewing of
can only be accessed by entering the PIN.
DTV Settings
and press Q.
Q
to select the ones required. A tick will appear
EXIT
.
list are selected the PIN must be
digital
menu press b to select
Pu or
channels, they
d
Press B or b to highlight a channel and press Q to
watch.
35
CONTROLS AND FEATURES
Digital settings – other
English
settings
Subtitles
In digital mode, this feature will show subtitles on the screen in
the selected language provided they are being broadcast.
a
In the
DTV Settings
and Audio
b
Press b to select
select
Normal
Subtitle and Audio
Subtitle Type
Primary Subtitle Language
Secondary Subtitle Language
Audio Type
Primary Audio Language
Secondary Audio Language
c
Press b to select
Secondary Subtitle Language
select an option.
SUBTITLE
The
OFF, and to select subtitle language if more than one subtitle
is available.
button can be used to select subtitle ON or
menu press b to select
and press Q.
Subtitle Type
or
For Hard of Hearing
Primary Subtitle Language
and use C or c to
Subtitle
.
Normal
English
French
Normal
English
French
and use C or c to
Audio languages
This feature allows a programme or film to be viewed with a
choice of soundtrack language, provided they are currently
a
In the
Audio Type
Hard of Hearing
being broadcast.
Subtitle and Audio
and use C or c to select
.
menu press b to select
Normal
or
or
Common Interface
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional Access
Module) and card. These are purchased from a service provider
and allow additional subscription broadcasts to be viewed. For
a
b
c
For
information see a service provider.
Insert the CAM and card into the Common Interface
Slot, following the instructions provided with the CAM.
A box will appear on screen to confirm that the CAM
has been inserted.
In the
DTV Settings
Common Interface
Details of the CAM should now be available.
menu press B or b to select
and press Q.
b
Press b to select
Secondary Audio Language
select an option.
If more than one soundtrack is available, use the
button to select between them.
Primary Audio Language
and use C or c to
or
s
36
CONTROLS AND FEATURES
English
Software Upgrade
Auto Upgrade
When
Auto Upgrade
television will automatically upgrade while in standby if new
a
From the
Software Upgrade
b
Press b to select
c
Use C or c to select On or
Searching for New Software
If preferred, software upgrades can be searched for manually
a
b
using
In the
Software Upgrade
select
Search for New Software
Press Q. The television will automatically start
searching for a software upgrade, the progress bar will
move along the line.
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
Searching
If an upgrade is found the television will automatically
start downloading. If not, a screen will appear stating
that an upgrade is unavailable.
is set to On (default setting), the
software is available.
SETUP
menu press B or b to select
and press Q.
Auto Upgrade
Off
.
Search for New Software
menu press B or b to
.
.
.
System Information and
Reset TV
System Information
This feature can be used to check the version of software
currently installed. When in DTV mode, it includes additional
diagnostic information such as signal strength, signal quality,
a
b
Selecting
a
b
centre frequency, modulation, etc.
From the
SETUP
Information
Press Q to display the
System Information
Ch22
Ch25
Ch35
Ch46
menu press B or b to select
.
2.1.26.0 Feb 19 2009 - 15:56:50 FW:13
WEAK
AVERAGE STRONG
System Information
TOSHIBA
2009
System
.
Poor
Good
Good
Good
Reset TV
Reset TV
will reset all TV settings, including saved
channels, to their original factory values.
In the
SETUP
highlighted.
Press Q to select. A screen will appear warning that
all settings will be lost. Press
When the set powers back on, the
will appear. Press
then auto tune. (See ‘Quick Setup’ section on page
11.)
menu press b until
Q
to continue, the television will
Reset TV
Q
to continue.
Quick Setup
is
screen
37
CONTROLS AND FEATURES
PC Settings
English
Horizontal and Vertical Position
Connect the PC (as shown in the ‘Connecting a PC’ section) and
ensure that a picture is showing on the television screen. The
picture position may now be adjusted to suit personal
a
Press o to select PC, then select
SETUP
menu.
SETUP
Country Germany
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
PC Settings
b
Press Q. Press B and b to select an option, then C
or
c
to adjust the settings.
PC Settings
Horizontal Position
Vertical Position
Clock Phase
Sampling Clock
preference.
Reset
PC Settings
Antenna
0
0
0
0
from the
Sampling Clock
Adjusting the
a
b
c
Sampling Clock
scan, this will clear vertical lines on the screen.
In the
SETUP
highlighted.
Press Q to select, then b to highlight
Clock
.
Use C or c to adjust until the picture clears.
alters the number of pulses per
menu press b until
PC Settings
Sampling
is
Reset
To return to the original factory settings.
a
In the
SETUP
highlighted.
b
Press Q to select, then b to highlight
c
Press Q.
NOTE: When a PC is connected using HDMI none of these
functions will be available.
The screen is disrupted momentarily when adjusting the PC
setting. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.
menu press b until
PC Settings
Reset
is
.
Clock Phase
The
Clock Phase
Adjusting this can clear horizontal stripes and picture blur.
a
b
c
matches the PC signal with the LCD display.
In the
SETUP
highlighted.
menu press b until
Press Q to select, then b to highlight
Use C or c to adjust until the picture clears.
PC Settings
Clock Phase
is
.
38
CONTROLS AND FEATURES
English
Input selection and AV
connections
See page 7 for a clear view of the back connection
recommendations.
Most media recorders and decoders send a signal through the
SCART lead to switch the television to the correct
Alternatively press the external source selection button
until the picture from connected equipment is shown.
This button must be used to view equipment connected using
the COMPONENT VIDEO INPUT (
An
S
in the display
for an S-Video signal.
e.g.o2S (EXT 2S
EXT 3
), indicates the input is set
Input selection
Use the Input Selection window if the television does not switch
a
At any time by pressing o on the remote control or
TV, a list will appear on screen showing all inputs and
external equipment.
Pressing o on the
Inputs
TV
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
HDMI™ displays equipment connected to
on the back or side of the television.
PC displays a computer connected to
the back of the television.
over automatically.
remote control
1
2
3C
Pressing o on the TV
Inputs
DTV TV
DTV RADIO *
DTV TEXT *
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
ATV
If radio or text channels
*
are currently available
for DTV.
External input skip
This is the feature to make the operation of input selection more
a
Press o to select the external input to be skipped (e.g.
HDMI 1).
convenient.
Input
socket.
).
right side panel
1
2
3C
Input HDMI
Input RGB/PC
o
on
b
In the
SETUP
Settings
c
Press B or b to tune
Manual Settings
Skip: On
HDMI 1
d
Press
The skip on input is greyed out in the
window and skipped over when you press
remote control.
menu press b to select
and press Q.
EXIT
.
Skip
on and press Q.
Manual
Inputs
INPUT signal selection
This specifies the type of signal going into SCART 2 (
the back of the television. Please refer to the manufacturer’s
instructions for the connected equipment.
a
In the
SETUP
highlighted, then press
b
With C or c select either AV or
required
AV Connection
PC/HDMI 1 Audio
HDMI 1 Audio
HDMI Settings
EXT 2 Input
Digital Audio Output
If video colour is absent, try the alternative setting.
menu press b until
input
for
EXT 2
Q
AV Connection
.
S-VIDEO
.
PC
Auto
AV
Auto
PC Audio
In order to receive sound from a connected PC, plug the audio
cable into the back of the television (as shown in ‘Connecting a
computer’ section), then use the
a
In the
SETUP
highlighted, then press
b
Highlight PC/
PC
option.
NOTE:
to Digital mode.
Selecting the PC option will force HDMI1 Audio
menu press b until
HDMI 1 Audio
PC/HDMI 1 Audio
Q
AV Connection
.
then use c to select the
selection
o
on the
EXT 2
as the
setting.
) on
is
is
39
CONTROLS AND FEATURES
English
If the connected HDMI source does not support digital audio,
plug the audio cable into
the television (as shown in the ‘Connecting an HDMI™ or DVI
device to the HDMI input’ section), then use the
a
In the
HDMI 1 Audio
b
Then highlight
Auto
AV Connection
If the sound is missing select an alternative setting.
NOTE:
HDMI 2, HDMI 3 and HDMI 4 are digital sound only.
Certain DVD disk formats may not output from this TV
(32/44.1/48kHz and 16/20/24 bits are acceptable).
HDMI 1 Audio
PC/HDMI 1 (AUDIO)
setting.
AV Connection
or
Analogue
PC/HDMI 1 Audio
HDMI 1 Audio
HDMI Settings
EXT 2 Input
Digital Audio Output
HDMI 1 supports digital and analogue sound,
menu press b to highlight
and using c select
HDMI 1 Audio
.
on the back of
HDMI 1 Audio
HDMI 1
and using C or c select
HDMI 1
Auto
AV
Auto
.
HDMI Settings
Some early HDMI equipment may not work properly with your
HDMI TV, please unplug your HDMI cable first and then try
setting the
Adjusting these settings should allow your early HDMI source to
a
b
Lip Sync
and
INSTAPORT™
operate properly with your television.
In the
SETUP
highlighted, then press
Press b to highlight
NOTE: HDMI Settings
inputs.
menu press b until
Q
.
HDMI Settings
is grayed out on non-HDMI
options to
AV Connection
and press Q.
Off
c
Press B or b to select option, then press C or c to
select the settings.
HDMI Settings
PC/
•Lip Sync: On
• INSTAPORT™: On
•RGB Range: Auto
NOTE:
your television is capable of refresh rates greater than 50Hz or
supports Deep Colour, you will need a Category 2 cable.
Conventional HDMI/DVI cables may not work properly with
this mode.
Lip Sync
TM
INSTAPORT
RGB Range
This option activates an auto audio/video display timing
adjustment function that allows HDMI source devices to
accurately perform synchronization automatically.
All above HDMI settings need proper HDMI source device.
If HDMI source products does not support these features, the
television may not work properly by activating these
features.
This feature reduces the lag of switching time when
switching HDMI sources.
This feature adjusts RGB full range signal automatically.
Limited
When
range from 16 to 235. When
signal is output in the range from 0 to 255.
is selected, RGB output signal is output in the
If your HDMI connection is capable of 1080p and/or
Full
is selected, RGB output
Digital Audio Output
.
is
When connecting a surround sound amplifier to the digital
audio output (Sony/Philips Digital Interface Format
[S/PDIF]), the following options can be selected.
PCM:
this mode outputs PCM format to the digital audio output
Auto:
this mode outputs Dolby Digital or PCM to the digital
audio output socket providing it is being broadcast.
Dolby Digital S Dolby Digital
Dolby Digital Plus
MPEG
S
a
In the
AV Connection
Audio Output
PCM
socket.
S
Dolby Digital
menu press b to select
.
On
On
Auto
Digital
HDMI, the HDMI logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing,
LLC.
INSTAPORT™ and INSTAPORT logo are trademarks of Silicon
Image, Inc. in the United States and other countries.
40
b
Use C or c to select
PCM
or
Auto
.
TEXT SERVICES
English
Text services
This television has a multi-page text memory, which
takes a few moments to load. It offers two
Auto
of viewing text –
available.
LIST
will display
will save your four favourite pages.
Selecting modes
The text character set will be automatically chosen by the
language setting in the
a
Select
Teletext
from the
b
With C or c choose
PREFERENCES
Teletext
Panel Lock
Auto Format
4:3 Stretch
Blue Screen
Side Panel
TOSHIBA Illumination
SETUP
PREFERENCES
Auto
or
LIST
Text information
The TEXT button:
To view text services press
the text over a normal broadcast picture and again to return to
normal viewing. Channels cannot be changed until text is
cancelled.
The first text page shown will be the
Any text page can be accessed by entering the 3 digit page
number using the numbered buttons, pressing the coloured
buttons or pressing
go back to the previous page.
Sub-pages
The pages on the screen will dynamically update as sub-pages
are received.
If you open a page containing sub-pages, the sub-pages are
automatically displayed in sequence. To quit automatic subpage change, press
Once selected, the sub-page you are viewing will be
highlighted and, as the television loads any additional subpages, the colour of the numbers will change, indicating that
these pages have been loaded.
These sub-pages will remain available to view until another
page is chosen or, in normal TV mode, the channel is changed.
TEXT
. Press again to superimpose
initial
PU to advance to the next page and
C
or c.
Fastext
menu.
menu.
then press
Auto
Off
On
Off
On
1
On
page.
Modes
, if
EXIT
Pu to
.
Navigating pages using Auto
If
Fastext
is available four coloured titles will appear at the
base of the screen.
To access one of the four given subjects, press the relevant
coloured button on the remote control.
For further information on your particular text system(s), see
the broadcast text index page or, consult your local Toshiba
dealer.
Navigating pages using LIST
The four coloured choices at the bottom of the screen are
numbers – 100, 200, 300 and 400, which have been
programmed into the television’s memory. To view these
pages press the relevant coloured buttons.
To change these saved pages press the relevant coloured
button and enter the 3 digit number. This number will change
in the top left of the screen and in the coloured highlight.
Press
Q
to save.
numbers showing at the bottom will be saved and the
previous ones will be lost.
If Q is not pressed the selection will be forgotten when the
channel is changed.
Other pages may be viewed by entering the 3 digit page
number – but DO NOT press
Whenever Q is pressed all four page
Q
or these pages will be saved.
41
TEXT SERVICES
English
Below is a guide to the functions of the remote control text
buttons.
k
To display the index/initial page:
Press k to access the index/initial page. The one displayed is
dependant on the broadcaster.
Control buttons
TEXT To display a page of text:
Press
TEXT
a normal picture. Press again to return to normal television
viewing. Channels cannot be changed until this has been
done.
A
To discover the solutions on quiz and joke pages press the A
button.
B
At times it is convenient to hold a page of text. Press B and
B
held on screen until the button is pressed again.
C
Press C once to enlarge the top half of the page, press again
to enlarge the bottom half of the page. Press again to revert to
normal size.
D
to display text. Press again to superimpose text over
To reveal concealed text:
To hold a wanted page:
will appear in the top left of the screen. The page will be
To enlarge the text display size:
To select a page whilst viewing normal
picture:
Enter the page number then press
be displayed. The television will indicate when the page is
ready by changing the colour of the page number at the top of
the screen. Press
To display news flashes:
Select the news flash page for the chosen text service (see the
index page of text service). The news flashes will be displayed
as and when they are broadcast.
TEXT
to view the page.
D
, normal picture will
Remember to cancel text before
changing channels - press the TEXT
button twice.
42
PROBLEM SOLVING
English
Questions and Answers
Below are the answers to some of the most
common queries.
For more information go to
Why is there no sound or picture?
Q
Check the television is not in standby mode. Check the
mains plug and all mains connections.
A
There is a picture, but why is there little or no
Q
colour?
When using an
quality video tape, if there is little or no colour,
A
improvements may sometimes be achieved. The
colour is factory set to
the best colour system.
To check that you have the best colour:
a
With the external source playing, select
Settings
from the
Manual Settings
Colour System: Auto
EXT 2 A
b
With B or b choose between
NTSC 4.43
Q
A
Why is there a picture but no sound?
Q
Check all lead connections.
No sound or unacceptable format sound may be
A
received.
Check the volume has not been turned down or that
sound mute has not been selected.
or
NTSC 3.58
Why doesn’t the video/DVD being played show on
screen?
Make sure the VCR or DVD player is connected to the
television as shown on page 7, then select the correct
input by pressing
www.toshiba.co.uk
external
source, for instance, a poor
Auto
to automatically display
SETUP
menu.
Auto, PAL, SECAM
.
o
.
Manual
Why is the VCR/DVD picture in black and white?
Q
Check the correct
AV
. See
A
What else can cause a poor picture?
Q
Interference or a weak signal. Try a different television
station.
A
a
Select the
station and press
Fine Tuning
b
Using B or b adjust to get the best picture and sound.
Press
Q
ATV Manual Tuning
Manual Fine Tuning: 0
1 A C 9
Why don’t the controls of the television work?
Q
Check that
input
AV Connection
Manual Fine Tuning
ATV Manual Tuning
and then
Panel Lock
has been c hosen,
on page 39.
Q
, then press c to select
.
EXIT
.
is not On.
S-VIDEO
may help.
menu. Highlight the
0 I
or
Manual
A
,
Why doesn’t the remote control work?
Q
Check that the mode switch on the remote control is
in TV mode.
A
Check that the batteries aren’t dead or inserted
incorrectly.
Why is there a message permanently on the screen?
Q
Remove it by pressing .
A
Why is the
Q
The channel has been selected in
(
see
A
digital
'Digital Settings'
channel locked?
section
).
Locked Channels
43
Why can only certain
Q
A
Favourite
Channels
A
' section), set the feature to
change channels by using the number buttons.
digital
channels be viewed?
list has been selected (see '
Favourite
All Channels
or
PROBLEM SOLVING
English
Why are some of the
Q
unavailable?
Your subscription needs upgrading. Contact your
service provider.
A
Why is the soundtrack in English when a different
Q
audio language has been selected?
The programme is currently being broadcast with an
English soundtrack only.
A
Why is there incorrect or no sound when in
Q
mode?
Press s to ensure the hard of hearing option has
not been selected.
A
What can be done if the PIN number has been
Q
forgotten?
Use the Master PIN code of 1276, then change to a
number of your choice. Ensure that no-one else can
A
use the Master PIN by removing the Owner’s Manual.
Why are there vertical stripes on the screen when in
Q
PC mode?
The
Sampling Clock
from the
Settings
A
Clock
and adjust until the lines clear.
Why are there horizontal stripes and/or blurred
Q
images on the screen when in PC mode?
The
Clock Phase
from the
Settings
A
Phase
and adjust until the picture clears.
digital
subscription channels
DTV
may need adjustment. Select
SETUP
menu, highlight
may need adjustment. Select
SETUP
menu, highlight
Sampling
Clock
PC
PC
Why is a page number visible at the top of the screen
Q
but no text?
Text has been selected but Teletext information is
currently unavailable on the current source.
A
Why are the colours wrong when an NTSC source is
Q
played?
Connect the source via a SCART lead and play.
Select
A
a
b
Q
A
Manual Settings
Set the Colour to
Go to the
PICTURE
Why don't the devices connected via HDMI operate
properly?
Make sure to use cables with the HDMI logo
Some early HDMI equipment may not work properly
with the latest HDMI TV products, due to new standard
adoption. Try the HDMI settings
INSTAPORT™
(see page 8).
from the
Auto
and exit.
menu and adjust the tint.
to
Off
.
Lip Sync
SETUP
menu.
,
Why when
Q
they not showing on screen?
Subtitles are not currently being transmitted by the
broadcaster.
A
Why are there problems with analogue text?
Q
Good performance of text depends on a good strong
broadcast signal. This normally requires a roof or loft
A
aerial. If the text is unreadable or garbled, check the
aerial. Go to the
and look for the
operation of text in some detail. If further information
is needed on how to use text
digital
subtitles have been selected are
main index
User Guide
page of the text service
. This will explain the basic
see the text section
.
44
Why are the LEDs on the front of the television
Q
flashing?
Check the table below.
A
PROBLEM SOLVING
English
LED indication
LED-3 LED-2 LED-1
Orange
Green
(Solid)
Red
(Solid)
OFF Green
Orange
(Solid)
Red
(Solid)
OFF OFF Green
Orange
(Solid)
Red
(Solid)
OFF Green
Orange
(Solid)
Red
(Solid)
OFF OFF Red
OFF OFF Red
Green
(Solid)
(Solid)
Green
Green
(Solid)
(Solid)
Green
(Solid)
(Solid)
OFF Green
(Solid)
OFF Green
(Solid)
(Solid)
Green
Red
(Solid)
(Solid)
Green
Red
(Solid)
(Solid)
Red
(Solid)
(Solid)
OFF Red
(Solid)
OFF Red
(Solid)
(Solid)
Blinks
Condition Solution
Power ON
On Timer is set
Program Timer is set
Power ON
On Timer is set
Program Timer is
working
Power ON
On Timer is set
Program Timer is
NOT set
Power ON
On Timer is NOT set
Program Timer is set
Power ON
On Timer is NOT set
Program Timer is
working
Power ON
On Timer is NOT set
Program Timer is
NOT set
Power OFF (Standby)
On Timer is set
Program Timer is set
Power ON (Standby)
On Timer is set
Program Timer is
working
Power OFF (Standby)
On Timer is set
Program Timer is
NOT set
Power OFF (Standby)
On Timer is NOT set
Program Timer is set
Power ON (Standby)
On Timer is NOT set
Program Timer is
working
Power OFF (Standby)
On Timer is NOT set
Program Timer is
NOT set
Power protect
detection.
–
–
–
–
–
–
–
–
–
–
–
–
Turn OFF the TV
and unplug the
power cord. Plug
the power cord in
again and turn
ON the TV.
LED-3
LED-2
LED-1
45
INFORMATION
English
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND
NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE
VIDEO IN COMPLIANCE WITH THE AVC STANDARD
(“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED IN
A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/
OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED
FROM MPEG LA, L.L.C.
SEE HTTP//WWW.MPEGLA.COM
Cleaning the screen and cabinet…
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you
polishes or solvents on the screen or cabinet as this may cause damage.
Disposal…
The following information is only for EU-member states:
Disposal of products
The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately
from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be
separated at the recycling centres.
The black bar indicates that the product was placed on the market after August 13, 2005.
By participating in separate collection of products and batteries, you will help to assure the proper disposal of
products and batteries and thus help to prevent potential negative consequences for the environment and human
health.
For more detailed information about the collection and recycling programmes available in your country, please
contact your local city office or the shop where you purchased the product.
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and
disposed of separately from household waste.
If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or
cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury
(Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of products and
batteries and thus help to prevent potential negative consequences for the environment and human health.
For more detailed information about the collection and recycling programmes available in your country, please
contact your local city office or the shop where you purchased the product.
License Information
do not
use any proprietary
46
For your own records
INFORMATION
English
47
INFORMATION
Information
English
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Signal information for Mini D-sub 15 pin connector
Pin No. Signal name Pin No. Signal name Pin No. Signal name
1 R 6 Ground 11 NC
2 G 7 Ground 12 NC
3 B 8 Ground 13 H-sync
4NC*9 NC14V-sync
5 NC 10 Ground 15 NC
* NC = not connected
Acceptable PC signals through the PC terminal
Format Resolution V. Frequency H. Frequency Pixel Clock Frequency
VGA 640 × 480 59.940Hz 31.469kHz 25.175MHz
72.809Hz 37.861kHz 31.500MHz
75.000Hz 37.500kHz 31.500MHz
SVGA 800 × 600 56.250Hz 35.156kHz 36.000MHz
60.317Hz 37.879kHz 40.000MHz
72.188Hz 48.077kHz 50.000MHz
75.000Hz 46.875kHz 49.500MHz
XGA 1024 × 768 60.004Hz 48.363kHz 65.000MHz
70.069Hz 56.476kHz 75.000MHz
75.029Hz 60.023kHz 78.750MHz
WXGA 1280 × 768 59.995Hz 47.396kHz 68.250MHz
59.870Hz 47.776kHz 79.500MHz
74.893Hz 60.289kHz 102.250MHz
1360 × 768 60.015Hz 47.712kHz 85.500MHz
SXGA 1280 × 1024 60.020Hz 63.981kHz 108.000MHz
75.025Hz 79.976kHz 135.000MHz
NOTE:
Depending on the connected PC, one of the following may occur; incorrect display, false format detection, picture position
failure, blur, or judder. But this is not a malfunction of your TV.
48
INFORMATION
Acceptable video or PC signals through the HDMI terminals
Format Resolution V. Frequency H. Frequency Pixel Clock Frequency
480i 720 × 480i 59.940/60.000Hz 15.734/15.750kHz 27.000/27.027MHz
576i 720 × 576i 50.000Hz 15.625kHz 27.000MHz
480p 720 × 480p 59.940/60.000Hz 31.469/31.500kHz 27.000/27.027MHz
576p 720 × 576p 50.000Hz 31.250kHz 27.000MHz
1080i 1920 × 1080i 59.940/60.000Hz 33.716/33.750kHz 74.176/74.250MHz
1080i 1920 × 1080i 50.000Hz 28.125kHz 74.250MHz
720p 1280 × 720p 59.940/60.000Hz 44.955/45.000kHz 74.176/74.250MHz
720p 1280 × 720p 50.000Hz 37.500kHz 74.250MHz
1080p 1920 × 1080p 59.940/60.000Hz 67.500kHz 148.500MHz
1080p 1920 × 1080p 50.000Hz 56.250kHz 148.500MHz
1080p 1920 × 1080p 24.000Hz 27.000kHz 74.250MHz
VGA 640 × 480 59.940Hz 31.469kHz 25.175MHz
72.809Hz 37.861kHz 31.500MHz
75.000Hz 37.500kHz 31.500MHz
SVGA 800 × 600 56.250Hz 35.156kHz 36.000MHz
60.317Hz 37.879kHz 40.000MHz
72.188Hz 48.077kHz 50.000MHz
75.000Hz 46.875kHz 49.500MHz
XGA 1024 × 768 60.004Hz 48.363kHz 65.000MHz
70.069Hz 56.476kHz 75.000MHz
75.029Hz 60.023kHz 78.750MHz
WXGA 1280 × 768 59.995Hz 47.396kHz 68.250MHz
59.870Hz 47.776kHz 79.500MHz
74.893Hz 60.289kHz 102.250MHz
1360 × 768 60.015Hz 47.712kHz 85.500MHz
SXGA 1280 × 1024 60.020Hz 63.981kHz 108.000MHz
75.025Hz 79.976kHz 135.000MHz
English
49
INFORMATION
Specifications and
English
accessories
DVB-T Broadcast systems/channels
UK UHF 21-68 PAL-I UHF UK21-UK69
France
Germany VHF 05-12
Austria VHF 05-12
Switzerland VHF 05-12
Italy VHF 05-12 (D,E,F,G,H,H1,H2)
Spain UHF 21- 69
Nederlands VHF 05-12
Greece VHF 05-12
Video Input
External connections
EXT 1 Input/Output 21-pin SCART RGB, A/V
EXT 2 Input/Output 21-pin SCART A/V, S-vi deo
EXT 3 Input Phono jacks
EXT 3 Input (Side) Phono jack
HDMI 1/2/3 Input HDMI™ (Audio LI P SYNC, INSTAPORT™,
HDMI 4 Input (Side ) HDMI™ (Audio LIP S YNC, INSTAPORT™,
PC Input Mini D-sub 15-pin Analogue RGB signal
PC/HDMI 1 A udio 3.5mm mini jack Au dio
Digital Audio Output (S/PDIF) Optical
USB port USB class: Mass Storage
VHF 05-10 (VHF 01-05)
UHF 21-69
UHF 21-69
UHF 21-69
UHF 21-69
UHF 21-69
UHF 21-69
UHF 21-69
PAL, SECAM, NTSC 3.58/4.43
Broadcast systems/channel s
PAL-B/G UHF E21-E69
SECAM-L UHF F21-F69
SECAM-D/K UHF R21-R69
Phono jacks
Phono jacks
RGB Range supported)
RGB Range supported)
File system: FAT12/16/32
VHF E2-E12, S1-S41
VHF F1-F10, B-Q
VHF R1-R12
(AV out: TV out)
(AV out: TV out)
Y, P
Audio L + R
Video, S-video
Audio L + R
B/CB
, PR/C
R
Stereo
Visible Screen Size
(approx.)
Display
Sound output
(at 10% distortion)
Power consumption
(approx.)
Standby
Dimensions
(approx.)
Weight
(approx.) Model 32 AV
Headphone socket
Operating condition
Accessories
DVB is a registered trademark of the DVB Project
Reproduction in whole or part without wri tten permission is strictly prohibited.
Nicam
2 carrier system
Model 32
Model 32 AV
Model 32 AV
Model 32 AV 57cm (H) 79cm (W) 25cm (D)
80cm
37
94cm
42
107cm
16:9
Main 10W + 10W
118W
37 AV
152W
42 AV
205W
32 RV
96W
37 RV
124W
42 RV
144W
0.8W
37 AV
0.8W
42 AV
0.7W
32 RV
0.8W
37 RV
0.8W
42 RV
0.8W
37 AV 63cm (H) 90cm (W) 25cm (D)
42 AV 69cm (H) 101cm (W) 26cm (D)
32 RV 57cm (H) 79cm (W) 26cm (D)
37 RV 64cm (H) 90cm (W) 26cm (D)
42 RV 69cm (H) 101cm (W) 31cm (D)
(Height dimension includes foot stand)
13.0kg
37 AV
16.0kg
42 AV
20.5kg
32 RV
15.5kg
37 RV
19.5kg
42 RV
23.5kg
3.5mm stereo
Temperature 5°C - 35°C (41°F - 94°F)
Humidity 20% - 80% (non-condensing)
Remote control
2 batteries (AAA, IEC R03 1.5V)
Clip
Cleaning cl oth (to clean the cabinet and
control panel)
© Toshiba Information Systems (U.K.) Limited
All rights reserved .
50
Toshiba Information Systems (UK) Ltd
Specification is subject to change without notice.
Consumer Products Division,
Weybridge Business Park,
Addlestone Rd,
Weybridge, Surrey, UK
KT15 2UL
T 1
Loading...