Toshiba 28L110U, 32L110U Instruction Manual

Download

Page 1

28"/32" 720p 60Hz LED TV

28L110U

32L110U (only available in Canada)

Before using your new product, please read these instructions to prevent any damage.

Page 2

Contents

CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

HDMI®CEC Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

DTS TruSurround™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

GameTimer™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing the stand(s) or wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing the stands (28-inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing the stand (32-inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installing a wall-mount bracket (28-inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Installing a wall-mount bracket (32-inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

TV components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Front (28-inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Front (32-inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

What connection should I use? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting a cable or satellite box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

DVI (same as HDMI but requires an audio connection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Component video (better) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

AV (composite video) (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Coaxial (good). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Connecting an antenna or cable TV (no box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Connecting a DVD or Blu-ray player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Component video (better) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

AV (composite video) (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Connecting a game console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Component video (better) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

AV (composite video) (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

www.tv.toshiba.com

Page 3

Contents

Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

DVI (same as HDMI but requires an audio connection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Connecting a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Connecting headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Connecting external speakers or a sound bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Digital audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Analog audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Connecting a home theater system with multiple devices . . . . . . . . . . . . . . . . . . . .37

Connecting power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

28-inch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

32-inch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Aiming the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Programming the CH RTN button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Turning on your TV for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Setting up the video input jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Setting up the ANT/CABLE IN jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Setting the RGB range for HDMI jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Understanding the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Turning your TV on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Selecting the video input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

On-screen menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Navigating the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Selecting a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Viewing channel information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Viewing HDMI information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Controlling CEC-compatible devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Turning HDMI-CEC Control on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Turning TV Auto Power On on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Turning Device Auto Power Off on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Turning Amplifier Control on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Selecting the audio output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Using the TV remote to control CEC-compatible devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Using the TV menu to control CEC-compatible devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Using the Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Supported photo file formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Turning Auto Start on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Automatically opening the Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

www.tv.toshiba.com

iii

Page 4

Manually opening the Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Viewing photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Viewing photos in a slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Adjusting the TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Adjusting the picture size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Scrolling the TheaterWide™ picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Automatically adjusting the aspect ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Using the 4:3 Stretch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Freezing the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Adjusting sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Playing TV audio only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Using the Channel Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Channel Browser overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Setting up the Channel Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Selecting a channel or input in the Channel Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Adding and clearing channels and inputs in the History list . . . . . . . . . . . . . . . . . . . . . . . . . 60

Contents

Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Automatically scanning for channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Manually adding channels to the channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Hiding channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Setting up the Favorites list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Tuning to a favorite channel or input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Deleting a favorite channel or input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Setting a new PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Changing or deleting the PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Blocking TV programs and movies (for USA region) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Downloading rating information (for USA region) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Temporarily unlocking programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Locking video inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Locking channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Setting the GameTimer™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Locking control buttons on your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Using closed captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Turning closed captioning on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Selecting the analog closed captioning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Selecting the closed captioning mode with the C.CAPTION button . . . . . . . . . . . . . . . . . 70

Customizing digital closed captioning settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Adjusting time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Setting the time zone and Daylight Saving Time status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

www.tv.toshiba.com

Page 5

Contents

Adjusting menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Selecting the menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Labeling a video input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Cleaning the TV cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Cleaning the TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Viewing system information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Restoring settings to the defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Turning off the automatic power-off feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

CEC-compatible devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

One-year limited warranty - Toshiba Televisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

www.tv.toshiba.com

Page 6

CHILD SAFETY

PROPER TELEVISION PLACEMENT MATTERS

THE CONSUMER ELECTRONICS INDUSTRY CARES

•

Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable.

•

As you enjoy your television, please note that all televisions - new and old - must be supported on proper stands or installed according to the manufacturer's recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury.

TUNE IN TO SAFETY

•

ALWAYS follow the manufacturer’s recommendations for the safe installation of your

television.

•

ALWAYS read and follow all instructions for proper use of your television.

•

NEVER allow children to climb on or play on the television or the furniture on which the

television is placed.

•

NEVER place the television on furniture that can easily be used as steps, such as a chest

of drawers.

•

ALWAYS install the television where it cannot be pushed, pulled over or knocked down.

•

ALWAYS route cords and cables connected to the television so that they cannot be

tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

•

ALWAYS contact your retailer about professional installation if you have any doubts

about your ability to safely mount your television.

•

ALWAYS use a mount that has been recommended by the television manufacturer and

has a safety certification by an independent laboratory (such as UL, CSA, ETL).

•

ALWAYS follow all instructions supplied by the television and mount manufacturers.

•

ALWAYS make sure that the wall or ceiling where you are mounting the television is

appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer.

•

Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

•

Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat-panel television. Special care should be made in the placement of older CRT televisions.

•

ALWAYS place your older CRT television on furniture that is sturdy and appropriate for

its size and weight.

•

NEVER place your older CRT television on a dresser where children may be tempted to

use the drawers to climb.

•

ALWAYS make sure your older CRT television does not hang over the edge of your

furniture.

CE.org/safety

Page 7

Important Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “hazardous voltage” within the product's enclosure, which may be of sufficient magnitude to induce a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod,

bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15 The wall plug is the disconnecting device. The plug

must remain readily operable.

16 Remote control batteries should not be exposed

to excessive heat such as sunshine, fire, or the like.

17 The apparatus should not be exposed to dripping

or splashing, and no objects filled with liquids, such as vases, should be placed on the apparatus.

18 Your TV has four VESA mounting holes on the

back. If you attach a wall-mount bracket or TV stand to the back of your TV, the bracket or stand must be securely attached using all four holes. If you do not use all four mounting holes, your TV may fall and cause property damage or personal injury. See the documentation that came with your wall mount or TV stand for complete mounting instructions.

WARN ING

Electric shock hazard

To reduce the risk of fire or electric shock, do not remove any cover or expose the device to rain or moisture. No user-serviceable parts are inside. Refer servicing to qualified service technicians.

Lightning

For added protection for your device receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect any antenna or cable system. This helps prevent property damage and personal injury from lightning and power line surges.

Power lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be fatal.

www.tv.toshiba.com

Page 8

28L110U/32L110U

Handling the LCD panel

• Your TV’s screen is made of glass. Do not drop your TV or hit, jolt, or press hard against the LCD panel. If the screen breaks, be careful of broken glass.

• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.

• If the liquid gets in your mouth, immediately gargle, rinse, and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

Replacement parts

When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, personal injury, or other hazards.

Safety check

After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition.

Power source

Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company.

Servicing

These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

CAUTION

Damage requiring service

Unplug this TV from the power outlet and refer servicing to qualified service personnel under the following conditions:

• When the power supply cord or plug is damaged or frayed.

• If liquid has been spilled or objects have fallen into your TV.

• If your TV has been exposed to rain or water.

• If your TV does not operate normally by following the operating instructions. Adjust only those controls covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore your TV to its normal operation.

• If your TV has been dropped or damaged in any way.

• When your TV exhibits a distinct change in performance.

Outdoor antenna grounding

If an outside antenna or cable system is connected to your T V, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Antenna lead-in wire

Grounding clamp Antenna discharge

unit Grounding

conductors

Ground clamps Power service

grounding elec trode

system Electric service

equipment

Note to CATV system installer

Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides guidance for correct grounding. Specifically, it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical.

Condensation

Moisture will form on the TV if the TV is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the TV's performance may be impaired. To prevent this, let the TV stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.

Condensation may also form during the summer if the TV is exposed to the breeze from an air conditioner. In such cases, change the location of the TV.

Mobile telephone warning

To avoid interference with your TV picture and sound, operating problems, or even damage, keep your cordless and cellular telephones away from the TV.

www.tv.toshiba.com

Page 9

End of life directives

Your TV may contain materials that are regulated for environmental reasons. Your TV also contains materials that can be recycled and reused. To help protect the environment, contact your local authorities for information about disposal or recycling and about finding a recycler in your area before you dispose of your TV.

Non-active pixels

The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects.

www.tv.toshiba.com

Page 10

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Toshiba 28"/32" 720p 60Hz LED TV

Introduction

Congratulations on your purchase of a high-quality Toshiba product. Your 28L110U or 32L110U represents the state of the art in LED TV design and is designed for reliable and trouble-free performance.

HDMI®CEC Control

Enjoy the benefit of having HDMI CEC compatible products plug and play! No setup is needed! CEC technology lets different devices discover and communicate with each other. (See page 46 for instructions on how to use HDMI® CEC Control.)

DTS TruSurround™

DTS TruSurround delivers clear, crisp, and natural sound while providing deep enveloping bass.

GameTimer™

Use the GameTimer™ to set a time limit for playing a video game (from 30 to 120 minutes). When the GameTimer expires, your TV locks out the input source for the video game device.

www.tv.toshiba.com

Page 11

Toshiba 28"/32" 720p 60Hz LED TV

Installing the stand(s) or wall-mount bracket

• If you want to place your TV on a table or in an entertainment center, go to Installing the stands (28-inch) or Installing

the stand (32-inch).

• If you want to mount your TV on a wall, go to Installing a wall-mount bracket (28-inch) or Installing a wall-mount

bracket (32-inch).

Notes

• If you plan to wall-mount your TV, do not install the stand.

• Store the stand(s) and stand screws in case you decide to use the stand in the future.

Installing the stands (28-inch)

1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.

www.tv.toshiba.com

Page 12

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

2 Secure TV stands to the back of your TV with the provided screws (two screws per stand).

Screw type Screw length # of screws

M4 20 mm 4

Installing the stand (32-inch)

1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.

www.tv.toshiba.com

Page 13

2 Insert the stand leg into the slot on the back of your TV.

Toshiba 28"/32" 720p 60Hz LED TV

3 Secure the TV stand leg to the back of your TV with the two provided M5 × 12 mm screws (the long screws).

Screw type Screw length # of screws

M5 12 mm 2

www.tv.toshiba.com

Page 14

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

4 Insert the stand leg into the hole in the stand. Make sure that the post on the TV stand fits into the hole on the leg.

5 Secure the leg to the stand with the four provided M4 × 8 mm screws (the short screws).

Screw type Screw length # of screws

M4 8 mm 4

www.tv.toshiba.com

Page 15

Installing a wall-mount bracket (28-inch)

Warning

• Your TV has four VESA mounting holes on the back. If you attach a wall-mount bracket to the back of your TV, the bracket must be securely attached, using all four holes. If you do not use all four mounting holes, your TV may fall and cause property damage or personal injury. See the documentation that came with your wall mount for complete mounting instructions.

• This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See Miscellaneous on page 82.)

1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.

Toshiba 28"/32" 720p 60Hz LED TV

2 If the stands are installed, remove the two screws that secure each stand to your TV, then remove the stands.

www.tv.toshiba.com

Page 16

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

3 See the instructions that came with the wall-mount bracket for information about which screws to use and how to

correctly hang your TV.

Notes

• The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths.

• The mounting holes on the back of your TV take type M4 screws.

3.94 in. (100 mm)

www.tv.toshiba.com

Page 17

Installing a wall-mount bracket (32-inch)

Warning

• This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See Miscellaneous on page 82.)

1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.

Toshiba 28"/32" 720p 60Hz LED TV

2 If the stand is installed, remove the two screws that secure the stand leg to your TV, then remove the stand.

www.tv.toshiba.com

Page 18

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

3 See instructions that came with the wall-mount bracket for information about which screws to use and how to

correctly hang your TV.

Notes

• The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths.

• The mounting holes on the back of your TV take type M6 screws.

7.87 in. (200 mm)

www.tv.toshiba.com

Page 19

Toshiba 28"/32" 720p 60Hz LED TV

TV components

This section contains information about:

•Package contents

• Front (32-inch)

•Side

•Back

• Remote control

Package contents

• 28" or 32" LED TV

• Remote control and batteries (2 AAA)

• TV stands and 4 screws (28-inch)

• TV stand leg and 2 screws (32-inch)

• TV stand and 4 screws (32-inch)

• Power cord (28-inch)

• Quick Setup Guide

• Important Information

Front (28-inch)

Front (32-inch)

# Item Description

Remote control

sensor

Power indicator

Receives signals from the remote control. Do not block.

Turns off when your TV is on. Lights red when your TV is off

(standby mode).

www.tv.toshiba.com

Page 20

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Side

# Item Description

Connect an HDMI device to this jack. For more information, see

HDMI (best) on page 19, 25, 28,

or 31.

5 HDMI IN 1 (DVI)

OR Connect the video for a DVI

device to this jack. For more information, see DVI (same as

HDMI but requires an audio connection) on page 20 or 32.

Connect an HDMI device to this jack. For more information, see

HDMI (best) on page 19, 25, 28,

HDMI IN 2 (ARC)

or 31. OR Connect an ARC-enabled home

theater receiver to this jack. Connect a USB flash drive to this

jack to view compatible JPEG picture files. For more

7 USB

information, see Connecting a

USB flash drive on page 33 and Using the Media Player on

page 50.

# Item Description

Press to turn your TV on or off (standby mode).

1 POWER

War ning: When your TV is off,

power still flows through it. To completely disconnect power, unplug the power cord.

Volume mode—Press to adjust the volume.

/+ and T/–

Channel mode—Press to change the channel.

Input mode—Press to select the video input source.

Press to select volume, channel, or input mode, then press

3 CH/INPUT

/– to adjust the volume, change the channel, or select the video input source.

Connect headphones to this jack. See Connecting headphones on page 34.

(headphone)

Connect an analog sound bar, speaker system, or home theater system to this jack to listen to TV audio through external speakers. For more information, see Analog

audio on page 36.

/+ or

www.tv.toshiba.com

Page 21

Toshiba 28"/32" 720p 60Hz LED TV

Back

# Item Description

Connect a sound bar, digital speaker system, or home theater system to this jack to

DIGITAL OPTICAL

AUDIO OUT

listen to TV audio through external speakers. For more information, see Connecting

external speakers or a sound bar on page 35.

The component video and AV jacks are shared. You can connect only one component video or AV device at a time.

Connect the video for a component video device to the

Y/VIDEO, PB, P

OR VIDEO/Y

Y/VIDEO, P

information, see Component

video (better) on page 21, 26,

or 29. OR Connect the video for an AV

device to the Y/VIDEO jack. For more information, see AV

(composite video) (good) on

page 22, 27, or 30. Connect the audio for a

component video device to these jacks. For more information, see Component

video (better) on page 21, 26,

or 29.

3 AUDIO L and R

OR Connect the audio for an AV

device to these jacks. For more information, see AV (composite

video) (good) on page 22, 27,

or 30. Connect an antenna or cable TV

to this jack. For more

ANT/CABLE IN

information, see Coaxial (good) on page 23 or Connecting an

antenna or cable TV (no box) on

page 24.

, PR jacks. For more

www.tv.toshiba.com

Page 22

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Remote control

# Button Press to...

BACK CB

S T W X

MENU Open the on-screen menu.

PIC SIZE

PIC MODE

FAV

RECALL Display TV status information.

CHS/CH

C.CAPTION

INFO

NEXT CB

Open the channel browser and tune to the previous channel in the channel history. See Using the Channel Browser on page 58.

TV—Navigate in on- screen TV menus and to adjust settings.

USB—Control a photo slideshow.

Change how the picture looks on the screen (aspect ratio). See Adjusting the picture size on page 54.

Select the picture mode. You can select Dynamic, Standard, Movie, Game, or PC. See the Picture Mode option in Adjusting the TV picture on page 52.

Open the Favori te channel list. See Setting up the Favorites

list on page 62 and Tuning to a favorite channel or input on

page 62.

Change TV channels. S ee Selecting a channel on page 44.

Turn closed captioning on or off. Select the language (like English) to turn on closed captioning or Off to turn off closed captioning. See Turning closed captioning on or off on page 69.

Display TV status information, such as the channel number, channel name (if available), or signal source. See Vie win g

channel information on page45 .

Open the channel browser and tune to the next channel in the channel history. See Using the Channel Browser on page 58.

# Button Press to...

Turn your TV on or off (standby mode). When your TV is off,

(power)

INPUT

SLEEP

FREEZE

Numbers Enter channel numbers and PINs.

—

MUTE

VOL+/– Increase or decrease the volume.

the power indicator lights red. Warn ing: When your TV is off, power still flows through it.

To disconnect power, unplug the power cord.

Open the Input Selection list. Press S or T to sel ect the video input source, then press ENTER. See Selecting the

video input source on page 42.

Set the sleep timer. Each time you press this button, the sleep time increases by 10 minutes. See Setting the sleep

timer on page 72.

Freeze the picture. Press again to un-freeze the picture. See

Freezing the picture on page 56.

Enter a digital sub-ch annel number. S ee Selecting a channel on page 44.

Mute or un-mute the sound. See Adjusting the volume on page 44.

EXIT Close the on-screen TV menu.

ENTER Confirm selections o r changes in on-screen menus.

HDMI CEC Control—Control HDMI CEC-compatible

Media Controls

devices. See Controlling CEC-compatible devices on page 46. USB—Control a photo slideshow. See Using the Media

Player on page 50.

CH RTN Return to the previous channel or source.

www.tv.toshiba.com

Page 23

Toshiba 28"/32" 720p 60Hz LED TV

What connection should I use?

Your TV has several connection types for connecting devices to your TV.

For the best video quality, you should connect a device to the best available connection.

Use the following tables to identify cables:

Video quality

Best (use this

if your devices

have HDMI)

Better than

composite or

coaxial

Connection type and jack

HDMI

video/audio

Component

video (requires

an audio

connection)

Cable connector

Connection type and jack

Optical digital

audio output

Analog audio

input

3.5mm analog audio output

Cable connectors

Better than

coaxial

Good

AV (requires an

audio

connection)

Coaxial

video/audio

You can use the HDMI IN 1 (DVI) jack on your TV to connect a DVI device to your TV. For more information, see DVI (same as HDMI but requires an

audio connection) on page 20 or 32.

Cautions

• Check the jacks for position and type before making any connections.

• Loose connections can cause poor audio or video quality. Make sure that all connections are tight and secure.

• The external audio/video equipment shown may be different from your equipment. If you have questions, refer to the documentation that came with your equipment.

• Always unplug the power cord when connecting external equipment.

www.tv.toshiba.com

Page 24

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see What connection should I use? on page 18.

You can connect a cable or satellite box using:

•HDMI (best)

• DVI (same as HDMI but requires an audio connection)

• Component video (better)

• AV (composite video) (good)

• Coaxial (good)

HDMI (best)

Cable or

satellite box

On your TV

HDMI cable

connector

HDMI jack

Cable wall

jack

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI cable (not provided) to one of the HDMI IN jacks on the side of your TV and to the HDMI OUT jack

on the cable or satellite box.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the Input Selection list. 6 Press

or T to highlight HDMI 1 or HDMI 2, then press ENTER.

Side of TV

Note

An HDMI cable carries both audio and video. You do not need to use any audio cables.

www.tv.toshiba.com

Page 25

DVI (same as HDMI but requires an audio connection)

Notes

• You must use the HDMI IN 1 (DVI) jack to connect a cable box using DVI.

• Your TV supports DVI video only. To add sound for a DVI connection, connect external speakers or a sound bar to the cable or satellite box.

Cable or

satellite box

On your TV

HDMI cable with

HDMI-DVI adapter

HDMI cable

connector

Toshiba 28"/32" 720p 60Hz LED TV

Side of TV

HDMI IN 1

(DVI) jack

Cable

wall jack

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter

to the DVI OUT jack on the cable or satellite box. 4 Connect the other end of the cable to the HDMI IN 1 (DVI) jack on the side of your TV. 5 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 6 Press INPUT to open the Input Selection list. 7 Press

or T to highlight HDMI 1, then press ENTER.

www.tv.toshiba.com

Page 26

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Component video (better)

Note

Cables are often color-coded to match color-coded jacks.

Cable or

satellite box

On your TV

Component video cable

Audio cable

Component

video cable

Audio cable

connectors

Component

video jacks

Analog

audio jacks

Cable

Back of TV

wall jack

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a component video cable (not provided) to the Y/VIDEO, P

, and PR jacks on the back of your TV and the

component video out jacks on the cable or satellite box. 4 Connect an audio cable (not provided) to the AUDIO L and R jacks on the back of your TV and to the audio out jacks

on the cable or satellite TV box.

Important

•The Y/VIDEO, P

, and PR video jacks (used to connect a component device) share the AUDI O L and R jacks with the Y/VIDEO jack (used to connect an AV device). You can only connect one component video or AV device at a time. We suggest upgrading to HDMI if your cable or satellite box supports it.

• When you connect the audio using the AUDIO L and R jacks, the audio output is analog.

5 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 6 Press INPUT to open the Input Selection list. 7 Press

or T to highlight COMPONENT, then press ENTER.

www.tv.toshiba.com

Page 27

AV (composite video) (good)

Notes

• Cables are often color-coded to match color-coded jacks.

• The yellow video connector on the AV cable connects to the green Y/VIDEO jack.

On your TV

Toshiba 28"/32" 720p 60Hz LED TV

Cable or

satellite box

AV c able

connector

AV j ack

Audio cable

connectors

Analog

audio jacks

Cable

wall jack

Back of TV

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an AV cable (not provided) to the green Y/VIDEO jack and AUDIO L and R jacks on the back of your TV and

to the AV and audio out jacks on the cable or satellite box.

Important

•The Y/VIDEO, P

, and PR video jacks (used to connect a component device) share the AUDIO L and R jacks with the Y/VIDEO jack (used to connect an AV device). You can only connect one component video or AV device at a time. We suggest upgrading to HDMI if your cable or satellite box supports it.

• When you connect the audio using the AUDIO L and R jacks, the audio output is analog.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the Input Selection list. 6 Press

or T to highlight AV , then press ENTER.

www.tv.toshiba.com

Page 28

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Coaxial (good)

Cable or

satellite box

On your TV

Coaxial cable

connector

ANT / CABLE IN

jack

Cable

wall jack

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT / CABLE IN jack on the back of your TV and to the coaxial out jack

on the cable or satellite box.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the Input Selection list. 6 Press 7 If you cannot tune to channels you know exist, scan for channels. See Automatically scanning for channels on

page 60.

or T to highlight ANT/CABLE, then press ENTER.

Notes

• Use a coaxial cable to eliminate interference and noise from radio waves.

• Do not bundle the coaxial cable with the power cord or other cables.

Coaxial cable

Back of TV

www.tv.toshiba.com

Page 29

Connecting an antenna or cable TV (no box)

Antenna or cable TV

(no box)

On your TV

Toshiba 28"/32" 720p 60Hz LED TV

Coaxial cable

connector

ANT / CABLE IN

jack

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect a coaxial cable (not provided) to the ANT / CABLE IN jack on the back of your TV and to the antenna or

cable TV wall jack.

3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Press INPUT to open the Input Selection list. 5 Press 6 If you cannot tune to channels you know exist, scan for channels. See Automatically scanning for channels on

page 60.

or T to highlight ANT/CABLE, then press ENTER.

Notes

• Use a coaxial cable to eliminate interference and noise from radio waves.

• Do not bundle the coaxial cable with the power cord or other cables.

• If the antenna is not installed correctly, contact qualified service personnel to correct the problem.

• If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a highly directional outdoor or set-top antenna with a built-in amplifier.

• If the picture quality is good on some channels and poor on others, the problem may be caused by a poor or weak signal from the broadcaster or cable TV provider.

• If you connect to cable TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable TV provider about upgrading to a set-top box.

• Many high-definition (HD) channels upscale standard-definition (SD) content. The picture displayed on your TV is still displayed as SD, thus the picture quality will not be as clear or crisp as it would be if the content was originally recorded in HD.

Coaxial cable

Back of TV

www.tv.toshiba.com

Page 30

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type available. For more information, see What connection should I use? on page 18.

You can connect a DVD or Blu-ray player using:

•HDMI (best)

• Component video (better)

• AV (composite video) (good)

HDMI (best)

DVD or Blu-ray

player

On your TV

HDMI cable

connector

HDMI jack

1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your T V and to the HDMI OUT jack on

the DVD or Blu-ray player.

3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player. 4 Press INPUT to open the Input Selection list. 5 Press

or T to highlight HDMI 1 or HDMI 2, then press ENTER.

Side of TV

Note

An HDMI cable carries both audio and video. You do not need to use any audio cables.

www.tv.toshiba.com

Page 31

Component video (better)

Note

Cables are often color-coded to match color-coded jacks.

On your TV

Toshiba 28"/32" 720p 60Hz LED TV

DVD or Blu-ray

player

Audio cable

Component

video cable

Component

video cable

Audio cable

connectors

Component

video jacks

Analog

audio jacks

Back of TV

1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.

2 Connect a component video cable (not provided) to the Y/VIDEO, P

, and PR jacks on the back of your TV and to the

COMPONENT OUT jacks on the DVD or Blu-ray player.

3 Connect an audio cable (not provided) to the AUDIO L and R jacks on the back of your TV and to the L and R AUDIO

OUT jacks on the DVD or Blu-ray player.

Important

•The Y/VIDEO, P

• When you connect the audio using the AUDIO L and R jacks, the audio output is analog.

4 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player. 5 Press INPUT to open the Input Selection list. 6 Press

or T to highlight COMPONENT, then press ENTER.

www.tv.toshiba.com

Page 32

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

AV (composite video) (good)

Notes

• Cables are often color-coded to match color-coded jacks.

• The yellow video connector on the AV cable connects to the green Y/VIDEO jack.

DVD or Blu-ray

player

On your TV

AV c able

connector

AV jack

Audio cable

connectors

Analog

audio jacks

Back of TV

1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an AV cable (not provided) to the green Y/VIDEO jack and AUDIO L and R jacks on the back of your TV and

to the AV OUT jacks on the DVD or Blu-ray player.

Important

•The Y/VIDEO, P

• When you connect the audio using the AUDIO L and R jacks, the audio output is analog.

3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player. 4 Press INPUT to open the Input Selection list. 5 Press

or T to highlight AV , then press ENTER.

www.tv.toshiba.com

Page 33

Connecting a game console

You can connect a game console using:

•HDMI (best)

• Component video (better)

• AV (composite video) (good)

HDMI (best)

Game console

On your TV

HDMI cable

connector

Toshiba 28"/32" 720p 60Hz LED TV

Side of TV

HDMI cable

HDMI jack

1 Make sure that your TV’s power cord is unplugged and the game console is turned off. 2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your T V and to the HDMI OUT jack on

the game console.

3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation that

came with the console.

5 Press INPUT to open the Input Selection list. 6 Press

or T to highlight HDMI 1 or HDMI 2, then press ENTER.

Note

An HDMI cable carries both audio and video. You do not need to use any audio cables.

www.tv.toshiba.com

Page 34

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Component video (better)

Note

Cables are often color-coded to match color-coded jacks.

Game console

On your TV

Console-specific

component video and

audio cable

Component

video cable

Audio cable

connectors

Component

video jacks

Analog

audio jacks

Back of TV

1 Make sure that your TV’s power cord is unplugged and the game console is turned off. 2 Connect the video and audio connectors on the component video cable (not provided) to the Y/VIDEO, P

video jacks and AUDIO L and R jacks on the back of your TV and to the component jack(s) on the game console.

Important

• Your game console may require a special component video cable. See the documentation that came with your game console or check the manufacturer’s website.

•The Y/VIDEO, P

• When you connect the audio using the AUDIO L and R jacks, the audio output is analog.

, and PR

3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation that

came with the console.

5 Press INPUT to open the Input Selection list. 6 Press

or T to highlight COMPONENT, then press ENTER.

www.tv.toshiba.com

Page 35

AV (composite video) (good)

Notes

• Cables are often color-coded to match color-coded jacks.

• The yellow video connector on the AV cable connects to the green Y/VIDEO jack.

On your TV

Toshiba 28"/32" 720p 60Hz LED TV

Game console

Console-specific AV cable

AV cable

connector

Audio cable

connectors

AV j ack Analog

audio jacks

Back of TV

1 Make sure that your TV’s power cord is unplugged and the game console is turned off. 2 Connect the video and audio connectors on the game console’s AV cable (not provided) to the green Y/VIDEO jack

and AUDIO L and R jacks on the back of your TV and to the composite jack(s) on the game console.

Important

• Most game consoles come with a special AV cable. See the documentation that came with your game console or check the manufacturer’s Web site.

•The Y/VIDEO, P

• When you connect the audio using the AUDIO L and R jacks, the audio output is analog.

3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation that

came with the console.

5 Press INPUT to open the Input Selection list. 6 Press

or T to highlight AV , then press ENTER.

www.tv.toshiba.com

Page 36

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Connecting a computer

You can connect a computer using:

•HDMI (best)

• DVI (same as HDMI but requires an audio connection)

HDMI (best)

On your TV

HDMI cable

connector

Side of TV

HDMI cable

HDMI jack

1 Make sure that your TV’s power cord is unplugged and the computer is turned off. 2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on

the computer.

3 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer. 4 Press INPUT to open the Input Selection list. 5 Press 6 Adjust the display properties on the computer, if necessary.

or T to highlight HDMI 1 or HDMI 2, then press ENTER.

www.tv.toshiba.com

Page 37

DVI (same as HDMI but requires an audio connection)

Notes

• You must use the HDMI IN 1 (DVI) jack to connect a computer using DVI.

• Your TV supports DVI video only. To add sound for a DVI connection, connect external speakers or a sound bar to the computer.

On your TV

HDMI cable with

HDMI cable

connector

HDMI-DVI adapter

Toshiba 28"/32" 720p 60Hz LED TV

Side of TV

HDMI IN 1

(DVI) jack

1 Make sure that your TV’s power cord is unplugged and the computer is turned off. 2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter

to the DVI OUT jack on the computer. 3 Connect the other end of the cable to the HDMI 1 (DVI) jack on the side of your TV. 4 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer. 5 Press INPUT to open the Input Selection list. 6 Press 7 Adjust the display properties on the computer, if necessary.

or T to select HDMI 1, then press ENTER.

www.tv.toshiba.com

Page 38

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Connecting a USB flash drive

Side of TV

USB flash

drive

1 Plug a USB flash drive into the USB port on the side of your TV.

Caution

Do not remove the USB flash drive or turn off the TV while using the USB flash drive. You may lose data or damage the USB flash drive.

2 If your TV is turned on and Auto Start is set to On, press

ENTER. Press S or T to highlight Photo, then press ENTER.The Media Player menu opens.

If Auto Start is set to Off, press INPUT, press

Photo, then press ENTER. The Media Player menu opens.

For more information, see Turning Auto Start on or off on page 50.

Note

For information about supported file types, see Supported photo file

formats on page 50.

or T to highlight USB, then press ENTER. Press S or T to highlight

or X to select Ye s in the message that appears, then press

www.tv.toshiba.com

Page 39

Toshiba 28"/32" 720p 60Hz LED TV

Connecting headphones

When you connect headphones, the TV speakers are muted. To turn on the TV speakers, set the TV Speakers option on the Sound menu to On.

Warning

Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound.

Side of TV

1 Connect the headphones to the jack on the side of your TV.

2 In the screen that opens, press

or X to highlight Headphones/Audio Output, then press ENTER.

www.tv.toshiba.com

Page 40

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Connecting external speakers or a sound bar

You can connect external speakers using:

• Digital audio

•Analog audio

Digital audio

Digital speaker system

On your TV

Sound bar

Digital optical

audio cable

connector

Digital optical

audio jack

1 Make sure that your TV’s power cord is unplugged and the digital speaker system or sound bar is turned off. 2 Connect a digital optical audio cable (not provided) to the DIGITAL AUDIO OUTPUT jack on the back of your TV and

to the optical AUDIO IN jack on the digital speaker system or sound bar. 3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the

documentation that came with the digital speaker system or sound bar.

5 On your TV’s Sound menu, highlight Digital Audio Output, then press ENTER. Highlight Audio Format, then press

ENTER. Press

settings on page 57.

or T to select PCM, then press ENTER. See the Digital Audio Output option in Adjusting sound

Digital optical audio cable

Back of TV

www.tv.toshiba.com

Page 41

Analog audio

On your TV

Audio cable

connector

Toshiba 28"/32" 720p 60Hz LED TV

Note

When you connect an analog speaker system, the TV speakers are muted. To turn on the TV speakers, set the TV Speakers option on the Sound menu to On.

Analog speaker

system

Side of TV

Sound bar

Audio cable

jack

1 Make sure that the analog speaker system is turned off. 2 Connect an analog audio cable (not provided) to the jack on the side of your TV and to the AUDIO IN jacks on the

analog speaker system or sound bar.

3 In the screen that opens, press 4 Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the

documentation that came with the analog speaker system or sound bar.

or X to highlight Audio Output Fixed, then press ENTER.

www.tv.toshiba.com

Page 42

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Connecting a home theater system with multiple devices

DVD or Blu-ray player

Cable or satellite box

AV receiver

The connections you make depend on the video and audio jacks available on your devices. Refer to the documentation that came with your devices for connection information.

Just remember to use the best connection types available for the best picture and sound. For information about connection types, see What connection should I use? on page 18.

www.tv.toshiba.com

Antenna or cable

TV connected directly to the

wall jack

Page 43

Connecting power

28-inch

1 Connect one end of the power cord to the AC IN connector on the back of your TV. 2 Connect the other end of the cord to a power outlet.

Caution

• Your TV should only be operated from the power source indicated on the label.

• Always unplug the power cord from the power outlet when you will not be using your TV for an extended period of time.

32-inch

Toshiba 28"/32" 720p 60Hz LED TV

• Connect the power cord to a power outlet.

Caution

• Your TV should only be operated from the power source indicated on the label.

• Always unplug the power cord from the power outlet when you will not be using your TV for an extended period of time.

• The power cord is permanently attached to your TV. Do not try to unplug it from the back of your TV.

www.tv.toshiba.com

Page 44

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Using the remote control

This section includes topics about:

• Installing remote control batteries

• Aiming the remote control

•Programming the CH RTN button

Installing remote control batteries

1 While squeezing the release latch on the back of

the remote control, lift the battery compartment cover off the remote control.

2 Insert two AAA batteries into the battery

compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment.

3 Replace the battery compartment cover.

Cautions

• Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.

• Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.

• Make sure that batteries are disposed of correctly. Do not burn or incinerate.

Aiming the remote control

• Point the remote control towards the remote control sensor on the front of your TV.

Remote control

sensor

Programming the CH RTN button

You can use the SurfLock™ feature to temporarily program a specific channel or video input to the CH RTN button so you can return to the programmed channel or input from any other channel or input.

Note

Your TV returns to the programmed channel or input one time only. After you press CH RTN, the programmed channel or input is cleared and the CH RTN returns to it’s normal function.

1 Tune the TV to the channel or video input you

want to program to the CH RTN button.

2 Press and hold CH RTN until Memorized appears

on the screen. The channel or input has been programmed to the CH RTN button. When you press CH RTN, your TV tunes to the programmed channel or input.

Notes

• Do not mix batteries of different types.

• Do not mix old and new batteries.

• Remove batteries when the charge is depleted.

• If the remote control is not going to be used for an extended period of time, remove the batteries.

www.tv.toshiba.com

Page 45

Turning on your TV for the first time

The first time you turn on your TV, the Initial Setup wizard opens. The wizard guides you through setting up basic settings including the menu language, time zone, picture mode, TV signal source, and the channel list.

Note

You must select a language and Home or Store mode. You cannot exit the Initial

Setup wizard until you make these selections.

1 Make sure that you have:

• Installed the remote control batteries. (See page 39.)

• Connected an antenna, cable TV, or satellite TV. (See page 19 through 24.)

• Connected the power cord. (See page 38.)

2 Press (power) to turn on your TV. The Initial

Setup wizard opens.

Toshiba 28"/32" 720p 60Hz LED TV

5 Press

then press ENTER. For normal home use, you should select Home

mode. If you select Store mode, every time you turn on your TV, it will be in Store mode. Store mode is not an energy savings mode.

6 Press

press ENTER.

or X to highlight Home or Store mode,

or X to highlight Antenna or Cable, then

3 Press 4 Press

or X to highlight a language.

to select your time zone, then press ENTER.

or T to highlight Time Zone, press W or X

7 If you are using an antenna or connecting a cable

box directly to a wall jack, press ENTER again. Your TV starts scanning for channels available in your viewing area.

OR If you connected a cable box or a satellite box,

press EXIT to close the wizard. You do not need to scan for channels.

After the wizard closes, the Auto Tuning (Antenna) menu opens with the first found channel highlighted.

8 Press EXIT to close the menu.

www.tv.toshiba.com

Page 46

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Setting up the video input jacks

This section includes topic about:

• Setting up the ANT/CABLE IN jack

• Setting the RGB range for HDMI jacks

Setting up the ANT/CABLE IN jack

If you connect an antenna or cable TV without a box to the ANT/CABLE IN jack, you need to set up the jack so your TV correctly displays channels.

1 Press MENU, press

Installation, then press ENTER.

or T to highlight

Setting the RGB range for HDMI jacks

You can select the RGB range for the HDMI jacks.

Note

If your HDMI device does not support the HDMI RGB Range feature, your TV may not work correctly when you turn on this feature.

1 Press MENU, press

then press ENTER.

or T to highlight Options,

2 Highlight Channel Tuning, then press ENTER.

3 Highlight ANT/CABLE In, then press ENTER. 4 Highlight your TV input source, then press ENTER.

Select:

• Antenna if you connected an antenna to the ANT/CABLE IN jack

• Cable if you connected cable TV without a box to the ANT/CABLE IN jack

5 Press EXIT to close the menu.

2 Highlight Input Options, then press ENTER.

3 Highlight HDMI 1 RGB Range or HDMI 2 RGB

Range, then press ENTER.

4 Highlight an option, then press ENTER. Select:

• Auto—(Default) Adjusts the RGB full range signal automatically.

• Full—The RGB input signal is displayed in the range of 0 to 255.

• Limited—The RGB input signal is displayed in the range from 16 to 235.

5 Press EXIT to close the menu.

www.tv.toshiba.com

Page 47

Toshiba 28"/32" 720p 60Hz LED TV

Understanding the basics

This section covers basic information for:

• Turning your TV on or off

• Selecting the video input source

• On-screen menu overview

• Navigating the menus

• Selecting a channel

•Adjusting the volume

• Viewing channel information

• Viewing HDMI information

Turning your TV on or off

1 Make sure that the power cord is connected

securely and correctly. For more information, see

Connecting power on page 38.

2 Press (power) to turn on your TV. The power

indicator turns off.

3 Press (power) again to turn off your TV. Your TV

enters standby mode, and the power indicator turns red.

Warning

When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord.

Note

If your TV does not receive an input signal for 15 minutes, it automatically goes into standby mode.

Last mode memory

If power is interrupted while you are viewing TV, the Last Mode Memory feature automatically turns on your TV when the power is restored.

Selecting the video input source

1 Press INPUT. The Input Selection list opens.

2 Do one of the following:

• Press INPUT one or more times until the video input you want is selected.

• Press

• Press the number for the video input you want.

3 Press EXIT to close the menu.

want, then press ENTER.

You c a n select:

or T to highlight the video input you

• 0 for a device connected to the ANT / CABLE IN jack

• 1 for an AV device connected to the Y/VIDEO jack

• 2 for a component video device connected to the Y/VIDEO, P

• 3 for a device connected to the HDMI IN 1 (DVI) jack

• 4 for a device connected to the HDMI IN 2 (ARC) jack

• 5 for a USB flash drive connected to the USB jack.

Notes

• If a CEC-compatible device is connected

to an HDMI jack, the HDMI® CEC icon appears in the list.

• If a connected CEC-compatible device

has CEC-compatible devices connected to it, a separate device selection pop-up window appears. For example, the popup window for a CEC-compatible DVD player with a CEC-compatible audio receiver connected might appear as follows:

, and PR jacks

• If you press INPUT to select a

CEC-compatible device from the popup window, the device may turn on.

www.tv.toshiba.com

Page 48

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

On-screen menu overview

Notes

• Depending on the signal source selected, you may see different options on your screen.

• Menu items that are not selectable are grayed out.

Picture menu

Sound menu

Options menu

Installation menu

Tim ers menu

www.tv.toshiba.com

Page 49

Toshiba 28"/32" 720p 60Hz LED TV

Get Help menu

Navigating the menus

Press MENU to open the on-screen menu.

Press the right or left arrow to move the cursor on the screen or to adjust a selected item.

Adjusting the volume

• Press VOL+ or VOL– to increase or decrease the volume.

• Press MUTE to turn the sound on or off.

Note

If you adjust a setting on the Sound menu while the mute is active, the mute feature is cancelled.

Selecting a channel

• Select a channel from the Channel Browser. See

Using the Channel Browser on page 58.

• Press CH channel on the memorized channel list.

• Press the number buttons to enter the channel number you want, then wait for the channel to change or press ENTER to immediately change the channel.

• To select a digital sub-channel, press the number buttons to select the main digital channel, press — (sub-channel), then press the number button for the sub-channel. Wait for the channel to change, or press ENTER to immediately change the channel. For example, to tune to channel 5-1, press 5, — (sub-channel), then 1.

or CHT to go to the next or previous

Note

Button presses must be within two seconds of each other.

Press the up or down arrow to select menu options.

Press ENTER to confirm a selection or enter a sub-menu.

Press EXIT to close the menu.

• Press CH RTN (return) to go to the last viewed channel. You can program a specific channel to the CH RTN button so you can return to the programmed channel from any other channel. See

Programming the CH RTN button on page 39.

• Press FAV to open the favorite channel list, press or X to highlight a channel, then press ENTER. For information about setting up a favorite channel list, see Setting up the Favorites list on page 62.

Note

If a list has more than one page, press

to scroll through the pages.

www.tv.toshiba.com

Page 50

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Viewing channel information

Press INFO or RECALL. The following status information is displayed:

• Current video input (for example ANT/CABLE or AV )

• If ANT/CABLE is the current video input, either CABLE (for cable TV) or ANT (for over-the-air broadcasts)

• If ANT/CABLE is the current video input, channel number

• Digital signal strength indicator

• If the audio mode is analog, Stereo, Mono, or SAP analog audio status

• If the input mode is HDMI®, Dolby® Digital, or PCM

• Video resolution

• Aspect ratio of incoming video signal (4:3 or 16:9)

• TV program or movie rating

•GameTimer (if set)

Pressing INFO also displays the following status information for digital channels:

•Title

•Duration

• Detailed program description

Note

If you pressed INFO, press INFO again to close the banner.

Viewing HDMI information

When HDMI Information Display is set to On in the

Options menu and you press INFO, the HDMI Information banner opens and displays the following information:

•Resolution

•Scan Type

•Frame Rate

•Aspect

•Bit Depth

• Color Space

•RGB/YUV

•Chroma Format When the HDMI Information Display is set to Off,

the normal banner is displayed.

1 Press MENU, press

then press ENTER.

or T to highlight Options,

2 Highlight HDMI Information Display, then press

ENTER. 3 Highlight On or Off, then press ENTER. 4 Press EXIT to close the menu.

www.tv.toshiba.com

Page 51

Toshiba 28"/32" 720p 60Hz LED TV

Controlling CEC-compatible devices

This section covers:

• Turning HDMI-CEC Control on or off

• Turning TV Auto Power On on or off

• Turning Device Auto Power Off on or off

• Turning Amplifier Control on or off

• Selecting the audio output

• Using the TV remote to control CEC-compatible devices

• Using the TV menu to control CEC-compatible devices

HDMI CEC Control lets you control HDMI CEC-compatible devices connected to the HDMI jacks on your TV using the remote control that came with your TV. To use HDMI CEC Control, you must set the

Enable HDMI CEC Control setting on the HDMI CEC Control Setup menu to On.

Notes

• HDMI cables must be used to connect HDMI CEC-compatible devices to your TV.

• The connected device’s HDMI CEC feature must be turned on.

• If you connect an HDMI device that is not HDMI CEC-compatible, none of the HDMI CEC Control features work.

• Depending on the connected HDMI device, some HDMI CEC Control features may not work.

Turning HDMI-CEC Control on or off

Note

If Enable HDMI CEC Control is set to Off, the other options on the menu are grayed and cannot be used.

1 Press MENU, press S or T to highlight Options,

then press ENTER.

2 Highlight HDMI CEC Control Setup, then press

ENTER.

Note

When you press INPUT, the Input Selection list opens. If you select a CEC-compatible video device connected to an HDMI jack and that device is connected to a CEC-compatible audio device, a second selection list opens that shows both devices.

For example, if you connect a CEC-compatible Blu-ray player to an HDMI jack and the Blu-ray player is connected to a CEC-compatible sound bar, the second input selection list might appear as follows:

See Selecting the video input source on page 42.

3 Highlight Enable HDMI CEC Control, then press

ENTER. 4 Highlight On or Off, then press ENTER. 5 Press EXIT to close the menu.

www.tv.toshiba.com

Page 52

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Turning TV Auto Power On on or off

TV Auto Power automatically turns on your TV when

an HDMI CEC device is turned on, if the device has this feature.

1 Press MENU, press

then press ENTER.

2 Highlight HDMI CEC Control Setup, then press

ENTER.

or T to highlight Options,

Turning Device Auto Power Off on or off

Device Auto Power Off automatically turns off HDMI

CEC devices when you turn off your TV.

1 Press MENU, press

then press ENTER.

2 Highlight HDMI CEC Control Setup, then press

ENTER.

or T to highlight Options,

3 Make sure that Enable HDMI CEC Control is set to

On. 4 Highlight TV Auto Power, then press ENTER. 5 Highlight On or Off, then press ENTER. 6 Press EXIT to close the menu.

www.tv.toshiba.com

3 Make sure that Enable HDMI CEC Control is set to

On. 4 Highlight Auto Standby, then press ENTER. 5 Highlight On or Off, then press ENTER. 6 Press EXIT to close the menu.

Page 53

Toshiba 28"/32" 720p 60Hz LED TV

Turning Amplifier Control on or off

Amplifier Control lets you use your TV’s remote

control to control the volume and mute the sound on an audio receiver.

1 Press MENU, press

then press ENTER.

2 Highlight HDMI CEC Control Setup, then press

ENTER.

or T to highlight Options,

Selecting the audio output

Initial Speaker Setting lets you select whether your

TV’s remote control controls the TV speakers or a connected audio receiver.

1 Press MENU, press

then press ENTER.

2 Highlight HDMI CEC Control Setup, then press

ENTER.

or T to highlight Options,

3 Make sure that Enable HDMI CEC Control is set to

On. 4 Highlight Amplifier Control, then press ENTER. 5 Highlight On or Off, then press ENTER. 6 Press EXIT to close the menu.

3 Make sure that Enable HDMI CEC Control is set to

On.

4 Highlight Initial Speaker Setting, then press

ENTER. 5 Highlight TV or Receiver, then press ENTER. 6 Press EXIT to close the menu.

www.tv.toshiba.com

Page 54

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Using the TV remote to control CEC-compatible devices

When Enable HDMI CEC Control on the HDMI CEC Control Setup menu is set to On, you can use the

remote control that came with your TV to control a CEC-compatible device (such as a DVD or Blu-ray player).

Button Press to...

PLAY Begin playback. STOP Stop playback.

PAU S E

SKIP Skip forward. SKIP Skip backward. FF Fas t-f orwa rd. REW Rewind or fast-reverse.

S T W X

ENTER Enter menu options. EXIT Return to the previous menu.

Navigate menu options.

Note

These functions depend on the devices connected.

Pause the video during play or record mode.

Using the TV menu to control CEC-compatible devices

When Enable HDMI CEC Control on the HDMI CEC Control Setup menu is set to On, you can use the TV

menu to turn on a CEC-compatible device (such as a DVD or Blu-ray player) and access features on the device.

Note

These functions depend on the devices connected.

HDMI CEC Player Control option is grayed if:

• A non-HDMI input is currently selected.

•The Enable HDMI CEC Control option is set to Off.

• The connected CEC device is not a playback or recording device.

1 Make sure that Enable HDMI CEC Control is set to

On. See Turning HDMI-CEC Control on or off on

page 46.

2 Press MENU, press

then press ENTER.

or T to highlight Options,

www.tv.toshiba.com

3 Highlight HDMI CEC Player Control, then press

ENTER.

Page 55

Toshiba 28"/32" 720p 60Hz LED TV

4 Highlight an option, then press ENTER. You can

select:

• Power—Turns the selected device on or off.

• Root Menu—Accesses the root menu of the selected device.

• Contents Menu—Accesses the contents list of the device. When you press ENTER, the HDMI CEC Player Control menu closes.

• Setup Menu—Accesses the setup menu of a selected device.

• Top Menu—Accesses the top menu of a selected device.

• Menu—Accesses the menu of a selected device.

5 Press EXIT to close the menu.

Using the Media Player

You can connect a USB flash drive to your TV to view photos stored on the flash drive.

This section includes topics about:

• Supported photo file formats

• Turning Auto Start on or off

• Automatically opening the Media Player

• Manually opening the Media Player

• Viewing photos

• Viewing photos in a slideshow

Turning Auto Start on or off

When Auto Start is turned on and you plug a USB flash drive in the USB port on your TV, a message asks if you want to start the Media Player.

When Auto Start is turned off, you must manually start the Media Player.

1 Press MENU, press

then press ENTER.

2 Highlight MediaShare Setup, then press ENTER.

or T to highlight Options,

Supported photo file formats

Your TV supports the following photo file formats:

• Data type: JPEG EXIF ver 2.1

•File format: JPEG

• Maximum photo size: 6 MB

• Maximum number of files: 500/folder

• Maximum photo resolution: 4096 × 4096 pixels

Notes

• Connectivity is not guaranteed for all devices.

• Connect the USB flash drive to the TV directly. Do not use a USB Hub.

• You must obtain any required permission from copyright owners to use copyright content.

• Depending on the file size and amount stored on the USB flash drive, it may take some time to load before content is viewable.

• A message appears on-screen when files are loading from the USB flash drive.

• Only limited types of U3 USB devices are supported. We recommend that you not use U3 USB with Media Player.

• Non-supported characters are replaced with squares.

3 Highlight USB Auto Start, press

On or Off, then press ENTER.

4 Press EXIT to close the menu.

or X to select

Automatically opening the Media Player

Notes

•If Auto Start is turned off, you must manually start the Media Player. See Turning Auto Start

on or off on page 50 or Manually opening the Media Player on page 51.

• If you repeatedly insert and remove the USB flash drive, the message may not appear.

• The Media Player opens even if there are no photo files on the USB flash drive.

• While the Media Player is open, you cannot access the TV menus.

1 Make sure that Auto Start is turned on. See

Turning Auto Start on or off on page 50.

2 Gently insert a USB flash drive into the USB port on

your TV. A message asks if you want to start Media Player.

3 Press

or X to select Ye s , then press ENTER.

www.tv.toshiba.com

Page 56

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

4 Press S or T to highlight Photo, then press

ENTER. The Media Player displays a thumbnail

index of the files and folders on the flash drive.

5 To close the Media Player, press EXIT.

Manually opening the Media Player

Note

If Auto Start is turned on, a message asks if you want to start Media Player. See Automatically

opening the Media Player on page 50.

1 Gently insert a USB flash drive into the USB port on

your TV.

2 Press INPUT, press

or T to highlight USB, the

press ENTER.

3 Highlight Photo, then press ENTER. The Media

Player displays a thumbnail index of the files and folders on the flash drive.

4 To close the Media Player, press EXIT.

Viewing photos

When you connect a USB flash drive that has photos on it and open the Media Player, a thumbnail index screen opens that shows the files and folders on the flash drive.

To sort the files and folders on the thumbnail screen:

1 Press MENU, then press

2 Press

or X to select Title, New, or Old.

or T to highlight Sort.

• Title—Sorts by the file and folder name.

• New—Sorts by the file and folder date from the newest to the oldest.

• Old—Sorts by the file and folder date from the oldest to newest.

3 Press CH RTN to return to the thumbnail screen.

Viewing photos in a slideshow

When viewing photos in a slideshow, you can:

• Skip backward or forward through the photos in the current folder

• Set the time interval between photo displays.

• Repeat the slideshow

To navigate the thumbnail index screen:

• Press

S T W

or X to highlight a folder or photo, then

press ENTER.

• If you select a folder and press ENTER, the folder opens and displays thumbnails of the photos in the folder. Press CH RTN to return to the previous thumbnail screen or folder.

• If you select a photo and press ENTER, the photo is displayed full-screen.

• If all the photos do not fit on one screen:

• Highlight the top left thumbnail, then press

to move to the previous screen.

• Highlight the bottom right thumbnail, then press

to move to the next screen.

To navigate on a full-screen photo:

• Press

• Press press

or X to view the previous or next photo.

to rotate the photo 90° counter-clockwise or

to rotate the photo 90° clockwise.

• Press EXIT to close the Media Player.

To view photos in the slideshow:

• Highlight the first photo you want in the slideshow, then press ENTER to display the photo full-screen.

• Press

or X to view the previous or next photo in

the slideshow.

To set the time interval:

1 With a photo displayed full-screen, press ENTER. 2 Press MENU, then press

or T to highlight

Interval Time.

3 Press

or X to select the time interval.

4 Press CH RTN to continue the slideshow.

www.tv.toshiba.com

Page 57

Toshiba 28"/32" 720p 60Hz LED TV

To set the repeat mode:

1 With a photo displayed full-screen, press ENTER. 2 Press MENU, then press

Repeat.

3 Press 4 Press CH RTN to continue the slideshow.

or X to select On.

or T to highlight

Adjusting the picture

This section covers:

• Adjusting the TV picture

• Adjusting the picture size

• Scrolling the TheaterWide™ picture

• Automatically adjusting the aspect ratio

• Using the 4:3 Stretch

• Freezing the picture

Adjusting the TV picture

You can adjust various settings to improve the quality of the TV picture. Also, you can reset all picture settings to the factory default.

1 Press MENU, press

then press ENTER.

or T to highlight Picture,

2 Highlight an option, then press ENTER. You can

select:

• Picture Mode—Selects the picture mode. You can select:

• Dynamic—Significantly increases the contrast, color saturation, sharpness, gray scale, and brightness to create more vivid and dynamic images.

• Standard—Uses the default settings.

• Movie—Lowers the contrast for a darkened room.

• Game—Reduces controller delay for faster video gaming action.

• PC—Optimizes the image of a connected computer.

Note

The PC option is only available for HDMI. The option is grayed for other input sources.

• Store—The Store picture mode is only available if you selected Store Mode during initial setup. This option is hidden in the Home mode.

Note

When your TV is set to Store Mode (during the initial setup or from the Installation menu), your TV will always revert to Store Mode when you turn it on.

• Reset—Resets all picture settings to the factory default.

• Backlight—Sets the overall brilliance of the screen.

• Contrast—Adjusts the brightness of the light areas of the picture.

• Brightness—Adjusts the brightness of the dark areas of the picture.

• Color—Adjusts the color intensity of the picture. A low setting may make the color look faded. A high setting may make the color look artificial.

• Tint—Adjusts the color balance of the picture. Use this control to make skin tones look more natural.

• Sharpness—Adjusts the color detail of images. If you set this control too high, dark images may appear with light or white edges.

www.tv.toshiba.com

Page 58

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

• Advanced Picture Settings—Opens the Advanced Picture Settings menu where you can adjust additional video options.

• ColorMaster—Lets you adjust standard colors. You can select On or Off.

• Base Color Adjustment—When ColorMaster is turned on, displays a list of base colors you can adjust.

A Highlight this option, then press ENTER. B Highlight a color, then press ENTER. C Press

or X to select Hue, Saturation, or

Brightness, then press

or T to adjust

the setting.

• Color Temperature—Adjusts the color temperature.

A Highlight this option, then press ENTER. B Highlight Red, Green, or Blue, then press

or X to adjust the setting.

C Press ENTER. D Highlight Color Temperature, then press

ENTER.

E Highlight Cool (to enhance the blues),

Medium (to select a neutral color

temperature), or Wa rm (to enhance the reds), then press ENTER.

• Static Gamma—lets you adjust the levels of black in the picture.

A Highlight this option, then press ENTER. B Press

or X to decrease or increase the

black level detail.

• DynaLight™—Automatically strengthens the black coloring of dark areas in the video according to the level of darkness. You can select High, Low, or Off.

• Dynamic Contrast—Automatically detects changes in picture quality that affect the appearance of your contrast settings and automatically adjusts the video. You can select High, Middle, Low, or Off.

• Cinema Mode—Smooths the video motion when watching a movie on a DVD. You can select On or Off. (This option is available for video with a 480i or 1080i video resolution.)

• Noise Reduction—Reduces picture noise (snow).

A Highlight this option, then press ENTER. B Highlight MPEG NR or DNR, then press

ENTER.

C Highlight High, Middle, Low, or Off.

• Edge Enhancer—Adjusts the picture to achieve a sharper image. You can select On or Off.

• Reset—Resets all advanced picture settings to factory defaults.

• Display Settings—Opens the Display Settings menu where you can adjust how the picture is displayed on the screen.

A Highlight this option, then press ENTER. B Highlight Auto Aspect, then press

ENTER. Press

or T to select On or Off. See Automatically adjusting the aspect

ratio on page 55.

C Highlight 4:3 Stretch, then press ENTER.

Press

or T to select On or Off. See

Using the 4:3 Stretch on page 56.

D Highlight Picture Position, then press

ENTER twice. Press

or X to adjust the vertical picture position. See Scrolling the

TheaterWide™ picture on page 55.

W X S

3 Press

or T to adjust the option or select a

setting, then press ENTER.

4 Press EXIT to close the menu.

Notes

• Picture setting adjustments affects the current video input only. You can adjust the picture quality separately for each input.

• Depending on the Sharpness setting, the Edge Enhancer effect may be reduced.

www.tv.toshiba.com

Page 59

Toshiba 28"/32" 720p 60Hz LED TV

Adjusting the picture size

1 Press PIC SIZE. 2 Do one of the following:

• Repeatedly press PIC SIZE.

• Press the corresponding number button (0-5) while the Picture Size menu is displayed. You can select Native, 4:3, Full, TheaterWide 1,

TheaterWide 2, TheaterWide 3, Normal, or Dot by Dot.

• Repeatedly press

3 Press ENTER or EXIT to close the menu.

Picture size Example

Native:

If the program is a 1080i, 1080p, 720p, 480i (HDMI®), or 480p (HDMI®) program, the picture is scaled to display the entire picture within the borders of the screen (no overscanning).

This picture size is especially useful for viewing external HD sources, such as DVD movies, video games, or computer graphics.

4:3

Displays the picture in letter box format. Some program formats will display with sidebars and/or bars at the top and bottom.

Full

Displays the picture in a 16:9 format (aspect ratio). If the picture is in a 4:3 format, the pic ture is stretched horizontally to fill the width of the screen but is not stretched vertically.

The edges of the picture may be hidden.

TheaterWide 1

The center of the picture remains close to its original proportion, but the left and right edges are stretched horizontally to fill the screen.

TheaterWide 2

This setting is for viewing letter box (4:3) programs.

or T.

Picture size Example

TheaterWide 3

This setting is for viewing letter box programs with subtitles.

The top and bottom edges of the picture are hidden.

Normal

Displays the image in the original aspect ratio. You may see black bars if the original content is not widescreen.This setting is for viewing VGA, SVGA, XGA, WXGA, and SXGA sources.

Dot by Dot

Dot by Dot is a non-scaling display. Depending on the input signal format (VGA, for example), the picture may appear with sidebars and/or bars at the top and bottom. This setting is for viewing VGA, SVGA, XGA, WXGA, and SXGA sources. This option is only available when the video input source is HDMI and the video signal is VGA, SVGA, XGA, WXGA, or SXGA.

Notes

• Some of the picture sizes may not be available depending on the receiving signal format (those will be grayed out in the Picture Size screen).

• If you select a TheaterWide™ picture size, the top and bottom edges of the picture (including subtitles or captions) may be hidden. To view these edges, try adjusting the Picture Position, viewing the program in 4:3 or Full, or scroll the picture. See Scrolling the

TheaterWide™ picture on page 55.

•The Native mode is supported only for HDMI® (1080i, 1080p, 720p, 480i, and 480p), COMPONENT (1080i and 720p), and ANT/CABLE (digital) inputs (1080i, 1080p, and 720p).

•In Native mode, the picture’s border may be hidden, displayed in black, or noisy, depending on the input signal.

www.tv.toshiba.com

Page 60

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Scrolling the TheaterWide™ picture

You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 picture size modes for each input. For more information about pictures sizes, see Adjusting the picture size on page 54.

1 Press MENU, press

then press ENTER.

or T to highlight Picture,

4 Press

or X to move the picture up and down as needed, then press ENTER. To save the new settings, press

or T to highlight Done, then

press ENTER. OR To revert to the factory defaults, highlight Reset

then press ENTER.

5 Press EXIT to close the menu.

Automatically adjusting the aspect ratio

When the Auto Aspect option is set to On, your TV automatically selects the picture size when one of the following input sources is received:

• 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE IN jack

• 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from an HDMI jack

2 Highlight Display Settings, then press ENTER.

3 Highlight Picture Position, then press ENTER

twice.

Aspect Ratio of Signal Source

Auto Aspect is set to On)

4:3 Normal 4:3 4:3 Letter Box TheaterWide 2 16:9 Full Not defined (no ID-1

data or HDMI® aspect data)

The current picture size you selected, see

Adjusting the picture size on page 54.

1 Press MENU, press

or T to highlight Picture,

then press ENTER.

www.tv.toshiba.com

Page 61

Toshiba 28"/32" 720p 60Hz LED TV

2 Highlight Display Settings, then press ENTER.

3 Highlight Auto Aspect, then press ENTER. 4 Highlight On, then press ENTER. (To turn off

Aspect Ratio, select Off.)

5 Press EXIT to close the menu.

Using the 4:3 Stretch

When 4:3 Stretch is turned on, your TV displays 4:3 programs as a full-screen picture.

1 Press MENU, press

then press ENTER.

or T to highlight Picture,

2 Highlight Display Settings, then press ENTER.

3 Highlight 4:3 Stretch, then press ENTER. 4 Highlight On, then press ENTER. (To turn off 4:3

Stretch, select Off.)

5 Press EXIT to close the menu.

Freezing the picture

You can freeze the picture while you are watching TV. The audio continues to play while the picture is frozen. When you unfreeze the picture, the video resumes to playing.

1 When watching the TV, press FREEZE. 2 To unfreeze the picture, press FREEZE or any other

button.

Notes

• If your TV is left in freeze mode for more than 15 minutes, freeze mode automatically turns off and your TV returns to normal video.

• Using the freeze function for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

www.tv.toshiba.com

Page 62

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Adjusting the sound

This section covers:

• Adjusting sound settings

• Playing TV audio only

Adjusting sound settings

You can adjust sound settings to improve the sound quality.

1 Press MENU, press

then press ENTER.

2 Highlight an option, then press ENTER. You can

select:

• Balance—Adjusts the balance between the left and right audio channels.

• Bass—Adjusts the low sounds.

• Tre ble —Adjusts the high sounds.

• DTS TruSurround—Delivers clear, crisp, and natural sound over front facing speaker configurations, complete with rich bass, high frequency detail, and clear dialog. You can select On or Off.

• Sound Mode—Selects the sound mode. You can select Standard, Music, Movie, or Clear Voi ce.

• TV Speakers—Turns your TV’s speakers on or off.

• MTS—(Analog channels received through the ANT/CABLE IN jack only) Selects the audio mode. You can select:

• Stereo—Select this option for programs broadcast in stereo. You can typically leave your TV in Stereo mode because Stereo outputs the type of sound being broadcast (stereo or mono).

• Mono—Select this option if there is noise or static on weak stereo broadcasts.

• SAP—Select this option to listen to a secondary audio program, if available. If you select this option and no secondary audio program is available, you may not hear sound. Change the MTS option to Stereo.

or T to highlight Sound,

• Digital Audio Selection—Lets you conveniently switch between audio tracks on a digital channel (when available). This option temporarily overrides the Primary Audio Language option on the Sound menu.

• Primary Audio Language—Selects the language for digital channels.

• Digital Audio Output—Opens the Digital Audio Output menu where you can adjust digital audio.

• Audio Format—Selects the digital audio format sent to an external audio system. You can select:

• PCM (to convert and output sound as PCM (pulse-code modulation) format).

• Auto (to pass through the original digital sound).

• Audio Delay—Fine tunes the audio when it is not in sync with the video.

• Delay adjustment—Lets you set the amount of delay to manually sync the audio with the video.

3 Press

4 Press EXIT to close the menu.

W X S

or T to adjust the option or select a

setting, then press ENTER.

www.tv.toshiba.com

Page 63

Toshiba 28"/32" 720p 60Hz LED TV

Playing TV audio only

You can turn off the picture on your TV and listen to the program audio only.

1 Press MENU, press

then press ENTER.

2 Highlight Power Management, then press

ENTER.

or T to highlight Options,

Using the Channel Browser

This section includes topics about:

• Channel Browser overview

• Setting up the Channel Browser

• Selecting a channel or input in the Channel Browser

• Adding and clearing channels and inputs in the History list

Channel Browser overview

The Channel Browser lets you:

• Navigate through channels and inputs

• Tune to recently viewed channels and input in the Channel Browser History list

• Tune to favorite channels in your Favorite channel list

3 Highlight Audio Only, then press ENTER. 4 Highlight On or Off, then press ENTER. 5 Press EXIT to close the menu.

Notes

• The picture turns off in about five seconds.

• Press any button to turn on the picture for about five seconds.

• To exit audio only mode, repeat this task and select Off.

# Item

Indicates which list is currently displayed. Available lists include:

•History

•ANT/CABLE

•Inputs

•Favorites

•HDMI® CEC

Indicates whether an item is a channel or input type.

Indicates the channel or input currently being viewed.

Indicates the channel or input currently highlighted in the browser.

Shows the channels stored in the current list.

www.tv.toshiba.com

Page 64

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Setting up the Channel Browser

1 Press MENU, press S or T to highlight Options,

then press ENTER.

2 Highlight Channel Browser Setup, then press

ENTER.

3 Press

4 Highlight a list, then press

to select Browse Mode or Select Mode.

• Browse Mode—When you highlight a channel

• Select Mode—When you highlight a channel or

Off. When a list is turned on, you can select the list in the Channel Browser. You can select:

• History List—Shows all the channels and inputs

• ANT/CABLE List—Shows a list of the channels

• Inputs List—Shows the available video inputs.

to highlight Navigation, then press W or X

or input, your TV automatically switches to the channel or input.

input, you must press ENTER to switch to the channel or input.

or X to select On or

you have selected. The History list is cleared each time you turn off your TV.

you can view from a device connected to the ANT/CABLE IN jack on your TV (an antenna or cable TV with no box). If you want to view only the channels with a signal, you must scan for available channels. If you did not scan for channels when you set up your TV for the first time, see Automatically scanning for channels on page 60.

• Favorites List—Shows the channels and inputs in your Favorites list. See Setting up the Favorites

list on page 62.

• HDMI CEC List—Shows the HDMI CEC devices connected to your TV. To view the HDMI CEC list,

Enable HDMI CEC Control in the HDMI CEC Control Setup menu must set to On. See Turn ing

HDMI-CEC Control on or off on page 46.

5 Press EXIT to close the menu.

Selecting a channel or input in the Channel Browser

The Channel Browser lets you select a channel or input from one of the Channel Browser lists. You have to set up the Channel Browser before you can use it. See Setting up the Channel Browser on page 59.

1 Press NEXT CB or BACK CB to open the Channel

Browser.

2 Press

3 Press NEXT CB or BACK CB to highlight a channel

4 Press EXIT to close the Channel Browser.

press W or X to select an item.

or input. If you selected Select Mode when you set up the

Channel Browser, press ENTER. Your TV switches to the channel or input you highlighted.

If you selected Browse Mode when you set up the Channel Browser, you do not have to press ENTER. Your TV switches to the channel or input you highlighted.

or T to select the list you want to use, then

Notes

• The Channel Browser opens with the Favorites list selected by default. If you select another list, the next time you open the Channel Browser, it opens with that list selected.

• If all the lists are turned off, pressing NEXT CB, BACK CB, or FAV does not open the Channel Browser. For information about turning lists on and off, see Setting up the Channel Browser on page 59.

www.tv.toshiba.com

Page 65

Toshiba 28"/32" 720p 60Hz LED TV

Adding and clearing channels and inputs in the History list

Items are added to the History list when you:

• Tune to a channel using the number buttons

• Tune to a channel using CH

• Switch to a different video input source When you tune to a channel or switch to a different

video input, the Channel Browser adds the channel or input to the History list and displays it on the right side of the Channel Browser. Previously tuned channels and inputs are shifted to the left, and eventually move off the left side. To access previously tuned channels or video input sources, press BACKCB to scroll backward through the list.

Any channel or input that you tune to repeatedly is not repeated in the History list. Instead the channel or input is moved to the end of the list on the right side of the Channel Browser.

Note

If you try to tune to a channel or input that cannot be selected, your TV automatically tunes to the previously viewed channel or input.

Items are cleared from the History list when you:

• Turn off your TV

• Change the configuration of the ANT/CABLE IN jack. See Setting up the ANT/CABLE IN jack on page 41.

or CH

Changing channel settings

This section covers:

• Automatically scanning for channels

• Manually adding channels to the channel list

•Hiding channels

• Setting up the Favorites list

• Tuning to a favorite channel or input

• Deleting a favorite channel or input

Automatically scanning for channels

When you scan for channels, your TV searches for channels with signals and stores the channel information in the channel list. When you press CH or CH

, your TV goes to the next or previous channel in the channel list. The channel scan may take several minutes.

Note

When you scan for channels, your TV erases any channels already stored in the channel list.

If a channel is not stored in the channel list, you can:

• Use the number button on the remote control to enter the channel number.

• Manually add the channel to the channel list. See Manually adding

channels to the channel list on page 61.

1 Make sure that you have set up the ANT/CABLE IN

jack before programming channels. See Setting up

the ANT/CABLE IN jack on page 41.

2 Press MENU, press

Installation, then press ENTER.

or T to highlight

www.tv.toshiba.com

Page 66

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

3 Highlight Channel Tuning, then press ENTER.

4 Highlight Auto Tuning, then press ENTER. 5 Use the number buttons to enter your 4-digit PIN,

then press ENTER twice. If you have not created a PIN, see Setting a new PIN on page 63. Your TV scans for available channels. The scan may take several minutes.

Note

You can press EXIT to stop the auto channel search, but you will need to run the auto channel search again to create a channel list.

6 When the scan is complete, press EXIT to close the

menu. Your TV tunes to the first scanned channel.

Manually adding channels to the channel list

Channels with weak signals may not be added to the channel list when you scan for channels. You can manually add a channel to the channel list if you know the channel number.

1 Press MENU, press

Installation, then press ENTER.

or T to highlight

2 Highlight Channel Tuning, then press ENTER.

3 Highlight Manual Tuning, then press ENTER.

4 Use the number buttons on the remote control to

enter the channel number, then press ENTER. 5 Press ENTER to start manual tuning. 6 Press EXIT to close the menu.

www.tv.toshiba.com

Page 67

Toshiba 28"/32" 720p 60Hz LED TV

Hiding channels

You can hide channels in the channel list. When you press CH channels. Hiding a channel also hides the channel in the Channel Browser.

You can still tune to a hidden channel by pressing the number buttons for the channel. If you tune to a hidden channel, the channel appears in the History list.

1 Press MENU, press

or CHT, your TV skips the hidden

then press ENTER.

or T to highlight Options,

Setting up the Favorites list

You can create a list of favorite channels and inputs. You can quickly browse through your favorites by pressing FAV, then selecting a channel or input from the list.

1 Tune to the channel or input you want to add to

the favorites list. 2 Press and hold FAV for about three seconds. The

channel or input is added to your favorite

channels list.

Notes

• The channel or input is added to the beginning of the Favorites list on the left side of the Channel Browser.

•If the Favorites list is not turned on in the Channel Browser, pressing FAV does not open the Favorites list. For information about turning lists on and off, see Setting up the Channel

Browser on page 59.

Tuning to a favorite channel or input

1 Press FAV to open the Fa vor ite s list.

2 Highlight Channel Options, then press ENTER.

3 Highlight a channel you want to hide, then press

ENTER. A check appears in the box next to the

channel.

Notes

• Channels labeled ATV are analog channels. Channels labeled DTV are digital channels.

• To un-hide a channel, highlight the channel, then press ENTER to remove the check.

• You can also lock specific channels so that they cannot be tuned until you unlock them. See Locking channels on page 67.

2 Press NEXT CB or RIGHT CB to highlight a channel

or input, then press ENTER.

3 Press EXIT to close the list.

Deleting a favorite channel or input

1 Press FAV to open the Fa vor ite s list.

2 Press NEXT CB or RIGHT CB to highlight the

channel or input you want to delete, then press — for about three seconds.

3 Press EXIT to close the Favorites list.

4 Press EXIT to close the menu.

www.tv.toshiba.com

Page 68

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Setting parental controls

Parental controls let you prevent your children from watching inappropriate material on TV. When set, parental controls read the rating of the program (with some exceptions, such as news and sports) and deny access to programs that exceed the ratings level you select.

Parental controls let you:

• Set ratings for TV programs and movies so you can prevent your children from watching inappropriate material on TV

• Lock video input sources

• Set a timer to limit how long you can play a game

• Lock the control buttons on your TV.

Note

To watch blocked programs, you must enter a PIN.

Parental control topics include:

• Setting a new PIN

• Changing or deleting the PIN

• Blocking TV programs and movies (for USA region)

• Downloading rating information (for USA region)

• Temporarily unlocking programs

•Locking video inputs

• Locking channels

• Setting the GameTimer™

• Locking control buttons on your TV

2 Highlight Parental PIN Setup, then press ENTER.

3 Use the number buttons to enter a 4-digit PIN,

enter the code again to confirm. then press

ENTER. The Parental PIN Setup menu opens.

4 Press EXIT to close the menu.

Note

If you forget your PIN, open the screen where you enter your PIN, then press INFO four times within five seconds. The PIN is cleared and you can enter a new PIN.

Changing or deleting the PIN

1 Press MENU, press S or T to highlight Options,

then press ENTER.

Setting a new PIN

A PIN is necessary for some menus. The Parental Control and Locks menu is grayed out if no PIN has

been set.

1 Press MENU, press

then press ENTER.

or T to highlight Options,

2 Highlight Parental PIN Setup, then press ENTER.

www.tv.toshiba.com

Page 69

Toshiba 28"/32" 720p 60Hz LED TV

3 Use the number buttons to enter your 4-digit PIN,

then press ENTER.

4 Highlight Change PIN or Delete PIN, then press

ENTER.

5 If you select Change PIN, enter your new PIN, then

enter it again. OR If you select Delete PIN, press

then press ENTER.

6 Press EXIT to close the menu.

or X to select Ye s ,

Blocking TV programs and movies (for USA region)

Some TV programs and movies include ratings that classify the content of the program (as unsuitable for younger viewers). Your TV detects the ratings and blocks the programs and movies according to the ratings you select.

Notes

• You must create a PIN before you can block TV programs and movies. See

Setting a new PIN on page 63.

• To view a program or movie rating, tune to the program or movie, then press INFO.

TV rating levels

U.S. TV ratings

TV-MA Mature audiences only. May contain:

• L—Crude or indecent language

• S—Explicit sexual activity

•V—Graphic violence

TV-14 Parental guidance strongly suggested.

TV-PG Parental guidance suggested. May

TV-G General audiences TV-Y7

TV-Y7FV

TV-Y Suitable for all children.

May contain:

• D—Intensely suggestive dialog

• L—Strong, coarse language

• S—Intense sexual situations

• V—Intense violence

contain:

• D—Some suggestive dialog

• L—Infrequent coarse language

• S—Some sexual situations

• V—Moderate violence

Suitable for children 7 and older. Note: Programs in which fantasy

violence may be more intense or more combative than other programs in this category are designated TV-Y7FV.

Movie rating levels

U.S. movie (MPAA) ratings

X Adults only NC-17 Not suitable for children under 17 R Restricted (Under 17 requires

accompanying parent or adult) PG Parental guidance suggested PG-13 Parents Strongly Cautioned (Some

material may be inappropriate for

children under 13) G General audiences (Appropriate for all

ages)

www.tv.toshiba.com

Page 70

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

1 Press MENU, press S or T to highlight Options,

then press ENTER.

2 Highlight Parental Control and Locks, then press

ENTER.

6 Press

ENTER.

7 Press

ENTER.

to highlight Edit Rating Limits, then press

S T W

or X to highlight a rating then press

Notes

• As you highlight a rating, a definition for the rating appears at the bottom of the screen.

• A blocked rating has an X next to it.

3 Use the number buttons to enter your 4-digit PIN,

then press ENTER.

4 Highlight Enable Rating Blocking, then press

ENTER.

5 Highlight On, then press ENTER.

8 When you have finished, press EXIT to close the

menu.

Downloading rating information (for USA region)

In the future, an additional rating system may become available for use in selectively blocking TV programs and movies.

The currently tuned station must be receiving a digital signal before an additional rating system can be downloaded.

1 Tune to the channel you want to download ratings

for.

2 Press MENU, press

then press ENTER.

or T to highlight Options,

www.tv.toshiba.com

Page 71

Toshiba 28"/32" 720p 60Hz LED TV

3 Highlight Parental Control and Locks, then press

ENTER.

4 Use the number buttons to enter your 4-digit PIN,

then press ENTER.

5 Highlight Enable Rating Blocking, then press

ENTER.

6 Highlight On, then press ENTER.

7 Press

to highlight Edit Rating Limits, then press

ENTER.

8 Highlight Alt RS, then press ENTER.

9 Press

S T W

or X to highlight a rating then press

ENTER.

Notes

• A blocked rating has an X next to it.

• You can only download the additional rating system one time.

• To view a program or movie rating, tune to the program or movie, then press INFO.

• You will not be able to download any updates to the rating system should such updates become available.

• The available rating information is controlled by the broadcaster. Content and format may vary.

10 When you have finished, highlight Done, then

press ENTER.

11 Press EXIT to close the menu.

Temporarily unlocking programs

If you try to tune to a program that exceeds the rating limits you have set, your TV enters program lock mode and a warning message appears on the screen.

You can temporarily unlock the program.

1 Press MUTE. 2 Enter your four-digit PIN, then press ENTER.

The program is unlocked and the normal picture appears. The program is locked again when you change the channel.

Notes

•The ALT RS option is only available if an additional rating system is currently available.

• Your TV may take several minutes to download the additional rating system.

• The information displayed in the Alternate Ratings screen depends on rating system available at the time of download.

www.tv.toshiba.com

Page 72

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Locking video inputs

You can use the Input Lock option to lock the video inputs (AV, COMPONENT, HDMI 1, and HDMI 2).

1 Press MENU, press

then press ENTER.

2 Highlight Parental Control and Locks, then press

ENTER.

or T to highlight Options,

5 Highlight a video input locking level, then press

ENTER. You can select:

• Video—Locks AV, COMPONENT, HDMI 1, and HDMI 2.

• Off—Unlocks all video inputs.

6 Press EXIT to close the menu.

Locking channels

Note

You must create a PIN before you can block channels. See Setting a new PIN on page 63.

1 Press MENU, press S or T to highlight Options,

then press ENTER.

3 Use the number buttons to enter your 4-digit PIN,

then press ENTER.

4 Press

to highlight Input Lock, then press

ENTER.

2 Highlight Channel Options, then press ENTER.

3 Highlight a channel, press

or X to move to the

column with the padlock icon, then press ENTER.

Notes

• Channels labeled ATV are analog channels. Channels labeled DTV are digital channels.

www.tv.toshiba.com

Page 73

Toshiba 28"/32" 720p 60Hz LED TV

4 Use the number buttons to enter your 4-digit PIN,

then press ENTER. A check appears in the locked column next to the channel.

Note

To unlock a channel, highlight the channel, then press ENTER to remove the check.

5 Press EXIT to close the menu.

Setting the GameTimer™

You can use the GameTimer™ to set a time limit for playing a video game (30–120 minutes). When the GameTimer expires, your TV locks out the input source for the video game device.

1 Press MENU, press

then press ENTER.

or T to highlight Timers,

3 Use the number buttons to enter your 4-digit PIN,

then press ENTER.

4 Highlight the amount of time you want to let the

game run before it turns off, then press ENTER. You c a n select Off, 30 min, 60 min, 90 min, or

120 min.

Note

To turn off the game timer, select Off.

5 Press EXIT to close the menu.

Notes

• A message appears when 10 minutes, 3 minutes, and 1 minute are remaining.

• If your TV loses power with time remaining, your TV enters input lock mode when power is restored (as if the GameTimer had been activated). To resume use, you must deactivate the input lock. See Locking video

inputs on page 67.

Locking control buttons on your TV

You can lock the buttons on the side of your TV to keep someone from changing your settings or changing channels. When Panel Lock is set to On, none of the buttons on your TV work except the POWER button.

You still use the remote control to control your TV.

1 Press MENU, press

then press ENTER.

or T to highlight Options,

2 Highlight Game Timer, then press ENTER.

2 Highlight Panel Lock, then press ENTER.

www.tv.toshiba.com

Page 74

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

3 Use the number buttons to enter your 4-digit PIN,

then press ENTER.

4 Highlight On, then press ENTER.

Note

To unlock the front panel buttons, select Off.

OR Press and hold VOL– on the side of your

TV for about 15 seconds until the volume icon appears on the screen.

5 Press EXIT to close the menu.

Using closed captioning

Closed captioning displays a text version of the TV program audio or displays information provided by the broadcaster.

Closed caption controls include:

• Turning closed captioning on or off

• Selecting the analog closed captioning mode

• Selecting the closed captioning mode with the C.CAPTION button

• Customizing digital closed captioning settings

Turning closed captioning on or off

2 Highlight Closed Captions, then press ENTER.

3 Highlight Closed Captions Display, then press

ENTER.

4 Highlight On (turns on closed captioning) or Off

(turns off closed captioning), then press ENTER.

5 Press EXIT to close the menu.

Note

You can also press C.CAPTION to turn closed captioning on or off.

Note

You may not see closed captioning when:

• A program or video has been dubbed

• Signal reception is weak or non-standard

1 Press MENU, press S or T to highlight Options,

then press ENTER.

www.tv.toshiba.com

Page 75

Toshiba 28"/32" 720p 60Hz LED TV

Selecting the analog closed captioning mode

Analog channels usually have one or more closed captioning modes. The CC1 mode usually displays a text version of the TV program audio in a small banner. The other CC modes display information provided by the broadcaster. The Text modes display information in a box that covers half of the screen.

1 Press MENU, press

then press ENTER.

2 Highlight Closed Captions, then press ENTER.

or T to highlight Options,

Selecting the closed captioning mode with the C.CAPTION button

Press C.CAPTION. The CC bar appears:

• If you are tuned to an analog channel (or a video device with a 480i signal), you can select CC1 through CC4 or T1 through T4.

• If you are tuned to a digital channel, the available closed captioning modes vary for digital chanels.

Customizing digital closed captioning settings

1 Press MENU, press S or T to highlight Options,

then press ENTER.

3 Highlight Analog CC Mode, then press ENTER. 4 Highlight an analog captioning mode, then press

ENTER. You can select:

• CC1 through CC4—Closed captioning appears in a small banner across the bottom of the screen. CC1 is usually the “printed” version of the audio. CC2 through CC4 display content provided by the broadcaster.

• T1 through T4—Closed captioning covers half or all of the screen. T1 through T4 display content provided by the broadcaster.

5 Press EXIT to close the menu.

Notes

If the program or video you are watching does not have closed captioning, no captions are displayed.

If T1 through T4 is not available in your area, a black rectangle may appear.

2 Highlight Closed Captions, then press ENTER.

www.tv.toshiba.com

Page 76

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

3 Highlight Digital CC Settings, then press ENTER.

4 Highlight an option, then press

the setting. You can select:

• Caption Size—Selects the font size.

• Caption Text Type—Selects the font type.

• Caption Text Edge—Selects the style of the letter edge.

• Caption Text Color—Selects the color for the words.

• Text Foreground Opacit y —Selects the opacity level for the words.

• Background Color— Selects the color for the background.

• Text Background Opacit y —Selects the opacity level of the background.

• Caption Text Edge Color—Select the color of the letter edge.

5 To adjust another option, press

the option, then press W or X to adjust the setting.

6 Press EXIT to close the menu.

or X to adjust

or T to highlight

Adjusting time settings

This section includes:

• Setting the time zone and Daylight Saving Time status

• Setting the sleep timer

Setting the time zone and Daylight Saving Time status

Your TV uses the time zone and Daylight Savings Time settings to correctly display program and channel status information.

1 Press MENU, press

Installation, then press ENTER.

2 Highlight Time Zone, then press ENTER. 3 Highlight a time zone, then press ENTER.

or T to highlight

www.tv.toshiba.com

4 Highlight Daylight Saving Time, then press

ENTER.

5 Highlight On (if your viewing area observes

Daylight Saving Time) or Off (if your viewing area does not observe Daylight Saving Time), then press ENTER.

6 Press EXIT to close the menu.

Page 77

Toshiba 28"/32" 720p 60Hz LED TV

Setting the sleep timer

You can specify the amount of time before your TV automatically turns off.

1 Press MENU, press

then press ENTER.

2 Highlight Sleep Timer, then press ENTER. 3 Use the number buttons to enter the sleep time.

OR Press

in 10-minute increments.

4 Press EXIT to close the menu.

or T to increase or decrease the sleep time

Notes

• You can also press SLEEP to set the sleep timer.

• To display the time remaining until the TV turns off, press SLEEP.

• To cancel the sleep timer, press SLEEP, then press

• If a power failure occurs, the sleep timer setting may be cleared.

or T to highlight Timers,

to select 0 minutes.

Adjusting menu settings

You can adjust how the TV menus look by:

• Selecting the menu language

• Labeling a video input source

Selecting the menu language

You can choose from three different menu language settings (English, Français, and Español) for the on-screen display of menus and messages.

1 Press MENU, press

Installation, then press ENTER.

2 Highlight Menu Language, then press ENTER. 3 Press

4 Press EXIT to close the menu.

ENTER.

or T to select a language, then press

or T to highlight

www.tv.toshiba.com

Page 78

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Labeling a video input source

You can add a label to a video input source to make it easier to identify.

You can also hide a video input source so that it is grayed on the Input Selection list and your TV skips the video input source when you press INPUT.

1 Press MENU, press

then press ENTER.

2 Highlight Input Options, then press ENTER.

or T to highlight Options,

4 Highlight the video input source you want to

label, then press list.

Note

If you are not using an input, you can select Hide for the label. Hide grays the input in the Input Selection list and skips the input when you press INPUT on the remote control.

5 Repeat steps 3 and 4 to label another input. 6 Press

7 Press EXIT to close the menu.

to save the label. OR Highlight Reset, then press ENTER to reset the

label to the factory default.

or T to highlight Done, then press ENTER

Notes

To reset the input labels to the default labels, highlight Reset, then press ENTER.

or X to select a label from the

Maintaining

• Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you.

• Storage temperatures are 32° to 122°F (0° to 50°C).

• Working temperatures are 41° to 104°F (5° to 40°C).

• Do not place your TV in direct sunlight or near a heat source.

This sections includes topics about:

• Cleaning the TV cabinet

• Cleaning the TV screen

3 Highlight Input Labeling, then press ENTER.

www.tv.toshiba.com

Cleaning the TV cabinet

Clean the cabinet with a soft, lint-free cloth. If the cabinet is especially dirty, moisten a soft, lint-free cloth in a weak detergent solution, squeeze the excess moisture from the cloth, then wipe the cabinet with the cloth. Use a clean cloth to dry the cabinet.

Cleaning the TV screen

Clean the screen with a soft, lint-free cloth.

Page 79

Toshiba 28"/32" 720p 60Hz LED TV

Troubleshooting

Use the following troubleshooting information to solve common problems.

War ning

Do not try to repair your TV yourself. Contact authorized service personnel.

Troubleshooting topics include:

• Viewing system information

• Restoring settings to the defaults

• Turning off the automatic power-off feature

• Video and audio problems

• Remote control problems

• General problems

• CEC-compatible devices problems

Viewing system information

You may need to view system information during troubleshooting.

1 Press MENU, press

then press ENTER.

or T to highlight Get Help,

Restoring settings to the defaults

When you restore default settings, all the settings you have customized (except parental controls) are reset.

1 Press MENU, press

Installation, then press ENTER.

2 Highlight Reset TV, then press ENTER.

Note

If you have created a PIN, use the number buttons to enter it, then press ENTER.

or T to highlight

2 Highlight System Information, then press ENTER.

Your TV displays information about your system.

3 To close the screen and return to the GetHelp

menu, press ENTER. OR To close the menu, press EXIT.

A confirmation screen opens.

3 Highlight Yes , (to reset) or No (to not reset), then

press ENTER. If you select Ye s , your TV turns off, then turns on

again. Complete the Initial Setup wizard and set up the video input jacks. For more information, see

Turning on your TV for the first time on page 40

and Setting up the video input jacks on page 41. OR If you do not want to reset your TV to the factory

defaults, highlight No, then press ENTER.

www.tv.toshiba.com

Page 80

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Turning off the automatic power-off feature

Your TV automatically turns off after 15 minutes when no video signal is detected.

You might want to change this setting to Off if:

• The incoming signal for an analog channel is too weak for your TV to detect.

• You connected an audio-only device (such as a CD player) to the AUDIO L and R jacks to listen to music through the TV speakers.

1 Press MENU, press

then press ENTER.

2 Highlight Power Management, then press

ENTER.

or T to highlight Options,

Video and audio

Problem Solution

Picture does not fill the screen. There are black bars around the picture.

No picture (screen is not lit) and no sound.

• Press PIC SIZE to change the

• Press on the TV or the

• Make sure that the Audio Only

• Make sure that the video cables

• Adjust the contrast and

• Make sure that the power cord

• Press INPUT and make sure that

• Try another channel. The station

• Make sure that the incoming

• Make sure that the antenna or

• Check the closed caption

aspect ratio. See Adjusting the

picture size on page 54.

remote control.

option is set to Off. See Playing

TV audio only on page 58.

are connected correctly and securely to your TV.

brightness. See Adjusting the

TV picture on page 52.

is plugged into a working outlet.

the correct video input source is selected. See Selecting the

video input source on page 42.

may be experiencing problems.

signal is compatible.

cable TV is connected correctly and securely. See Connecting a

cable or satellite box on

page 19 or Connecting an

antenna or cable TV (no box) on

page 24.

settings. Some TEXT modes can block the screen. See Using

closed captioning on page 69.

3 Highlight No Signal Power Down, then press

ENTER.

4 Highlight an input source, press

Off or On, then press ENTER.

5 Press EXIT to close the menu.

or X to select

www.tv.toshiba.com

Page 81

Toshiba 28"/32" 720p 60Hz LED TV

Problem Solution

Dark, poor, or no picture (screen is lit), but sound is good.

No color, dark picture, or color is not correct.

• Try another channel. The station may be experiencing problems.

• Make sure that the antenna or cable TV is connected correctly and securely. See Connecting a

cable or satellite box on

page 19 or Connecting an

antenna or cable TV (no box) on

page 24.

• Adjust the brightness. See

Adjusting the TV picture on

page 52.

• Press PIC SIZE to change the aspect ratio. See Adjusting the

picture size on page 54.

• If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.

• Make sure that the video cables are connected correctly and securely to your TV.

• The video cable(s) you are using may be bad. Try a new set.

• Try another channel. The station may be experiencing problems.

• Adjust the color settings. See

Adjusting the TV picture on

page 52.

• Make sure that the video cables are connected correctly and securely to your TV.

• Make sure that the antenna or cable TV is connected correctly and securely. See Connecting a

cable or satellite box on

page 19 or Connecting an

antenna or cable TV (no box) on

page 24.

• If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.

Problem Solution

Only snow (noise) appears on the screen.

Picture quality is good on some channels and poor on others. Sound is good.

Dotted lines or stripes appear on the screen.

Double images.

• Try another channel. The station may be experiencing problems.

• Make sure that the antenna or cable TV is connected correctly and securely. See Connecting a

cable or satellite box on

page 19 or Connecting an

antenna or cable TV (no box) on

page 24.

• If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.

• The problem may be caused by a poor or weak signal from the broadcaster or cable TV provider.

• If you connect to cable without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable TV provider about upgrading to a set-top box.

• Make sure that the antenna or cable TV is connected correctly and securely. See Connecting a

cable or satellite box on

page 19 or Connecting an

antenna or cable TV (no box) on

page 24.

• If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.

• Make sure that the video cables are connected correctly and securely to your TV.

• The video cable(s) you are using may be bad. Try a new set.

• Other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time, then back on to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.

• Use a highly directional outdoor antenna, cable TV, or satellite TV.

www.tv.toshiba.com

Page 82

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Problem Solution

The picture has a few bright or dark spots.

Good picture, but no sound.

Poor picture.

Good sound, but poor color.

• A few bright or dark spots on an LCD screen is normal. It does not affect the operation of your TV.

•Increase the volume.

• Make sure that the sound is not muted.

• Make sure that you do not have headphones connected. When headphones are connected, no sound comes from the TV speakers.

• If you are using a home theater system, sound bar, or external speaker system, make sure it is turned on and is not muted.

• If you are using a home theater system, sound bar, or external speaker system, make sure that you have selected the correct output mode.

• If you are using a home theater system, sound bar, or external speaker system and have connected it with a digital optical cable, go to the Sound menu, highlight Digital Audio Format, then press ENTER. Highlight Audio Format, then press ENTER. Press select PCM, then press ENTER. See the Digital Audio Format option in Adjusting sound

settings on page 57.

• Make sure that the audio cables are connected correctly and securely to your TV.

• Make sure that the antenna or cable TV is connected correctly and securely. See Connecting a

cable or satellite box on

page 19 or Connecting an

antenna or cable TV (no box) on

page 24.

• The audio cables you are using may be bad. Try a new set.

• Make sure that the room is not too bright. Light reflecting off the screen can make the picture difficult to see.

• If an S-VHS camera or a camcorder is connected while another connected device is turned on, the picture may be poor. Turn off one or more devices.

• Adjust the contrast, color, and brightness settings. See

Adjusting the TV picture on

page 52.

or T to

Problem Solution

Audio noise.

No output from one of the speakers.

After images appear.

• Other devices (for example, a

• Adjust the audio balance. See

• Make sure that the audio cables

• Do not display a still image,

Remote control

Problem Solution

Remote control does not work.

• Make sure that the power cord is plugged into a working outlet.

• Make sure that there are no obstructions between the remote control and the remote control sensor on the front of the TV.

• Point the remote control directly at the remote control sensor on your TV. For the location of the remote control sensor, see Aiming the

remote control on page 39.

• The supplied batteries are wrapped tightly in clear plastic. Make sure that you have removed this plastic from the batteries.

• Make sure that the batteries are installed correctly. See Installing

remote control batteries on

page 39.

• Replace dead batteries with new batteries. See Installing remote

control batteries on page 39.

surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.

Adjusting sound settings on

page 57.

are connected correctly and securely to your TV.

such as a logo, game, or computer image, for an extended period of time. This can cause a permanent after-image to be burned into the screen. This type of damage is not covered by your warranty.

www.tv.toshiba.com

Page 83

Toshiba 28"/32" 720p 60Hz LED TV

General

Problem Solution

No power.

“No signal” error message is displayed.

After Auto Channel Search, there are no channels.

When I press INPUT, I cannot select my device (it is grayed out).

• Make sure that the power cord is plugged into a working outlet.

• Unplug the power cord, wait 60 seconds, then plug the cord back in and turn on your TV.

• Other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device, at a time, then turning on your TV to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.

• Press INPUT and make sure that you have selected the correct input for the device or service you are trying to use.

• If you are using a cable or satellite box, use the remote that came with that box to change channels.

• Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider.

• Make sure that the antenna or cable/satellite TV is connected securely to your TV.

• Try replacing the cable between the antenna/cable or cable/satellite box and your TV.

• Make sure that the video input source for the device is not hidden. See Labeling a video

input source on page 73.

Problem Solution

One or more channels do not display.

Password is lost.

Some settings cannot be accessed.

TV cabinet creaks.

Control buttons do not work.

TV keeps turning off.

A retail banner is displayed.

• Make sure that the channels are not blocked. See Locking

channels on page 67.

• Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. See Hiding channels on page 62.

• If you are using a cable or satellite box, use the remote that came with that box to change channels.

• Press INPUT and make sure that you have selected the correct input for the device or service you are trying to use.

• If you forget your PIN, open the screen where you enter your PIN, then press INFO four times within five seconds. The PIN is cleared and you can enter a new PIN. See Setting a new PIN on page 63.

• If a setting is grayed, the setting is not available in the current video input mode (for example TV mode). Change to a different video input source. See

Selecting the video input source on page 42.

• When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction.

• Make sure that the Panel Lock option is set to Off. See Locking

control buttons on your TV on

page 68.

• Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV.

• Make sure that the sleep timer is not turned on. See Setting the

sleep timer on page 72.

• You selected Store Mode when you ran the Initial Setup wizard. Go to the Installation menu, highlight Store / Home Mode, then press Home, then press ENTER.

or X to select

www.tv.toshiba.com

Page 84

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

CEC-compatible devices

Problem Solution

My TV is not displaying the video from the connected CEC device.

• Make sure that the HDMI cable is connected securely to your TV and the device.

• Make sure that the device is connected to your TV with an HDMI cable.

• Make sure that the device is a CEC device. See the documentation that came with the device for more information.

• Press INPUT and make sure that the correct video input source is selected. See Selecting the

video input source on page 42.

• Make sure that the HDMI-CEC Control feature is turned on. See Turning HDMI-CEC Control

on or off on page 46.

• Try adjusting the TV picture. See

Adjusting the TV picture on

page 52.

Problem Solution

My TV is not playing the audio from the connected CEC device.

• Make sure that the HDMI cable is connected securely to your TV and the device.

• Make sure that the device is connected to your TV with an HDMI cable.

• Make sure that the device is a CEC device. See the documentation that came with the device.

• Make sure that the TV volume is turned up and not muted.

• Try adjusting the TV sound. See

Adjusting sound settings on

page 57.

• Make sure that the TV speakers are turned on and not muted. See Adjusting sound settings on page 57.

• Make sure that the HDMI-CEC Control feature is turned on. See Turning HDMI-CEC Control

on or off on page 46.

•If you have connected an HDMI CEC audio receiver, adjust the volume on the receiver. When your TV detects an audio receiver, the TV speakers turn off and sound plays through receiver speakers only.

• If you are using a home theater system, sound bar, or external speaker system, make sure that it is turned on and is not muted.

• If you are using a home theater system, sound bar, or external speaker system, make sure that you have selected the correct output mode.

• If you are using a home theater system, sound bar, or external speaker system and have connected with a digital optical cable, go to the Sound menu, highlight Digital Audio Format, then press ENTER. Highlight Audio Format, then press ENTER. Press select PCM, then press ENTER. See the Digital Audio Format option in Adjusting sound

settings on page 57.

or T to

www.tv.toshiba.com

Page 85

Toshiba 28"/32" 720p 60Hz LED TV

Problem Solution

My TV’s remote control does not control the device.

The device does not show up in the list of CEC devices.

My device does not turn off when I turn off my TV.

• Make sure that there are no obstructions between the remote control and the remote control sensors on your TV and the device.

• Depending on the device, all the buttons may not work.

• Make sure that the HDMI-CEC Control feature is turned on. See Turning HDMI-CEC Control

on or off on page 46.

• If you are trying to control the volume on an HDMI CEC audio receiver using your TV remote control, make sure that the Amplifier Control option is set to On. See Turning Amplifier

Control on or off on page 48.

• The device may not support this feature. See the documentation that came with the device for more information.

• Make sure that the device is turned on.

• Make sure that the HDMI cable is connected securely to your TV and the device.

• Make sure that the device is connected to your TV with an HDMI cable.

• Make sure that the HDMI-CEC Control feature is turned on. See Turning HDMI-CEC Control

on or off on page 46.

• Make sure that the device is a CEC device. See the documentation that came with the device.

• Make sure that the HDMI-CEC Control feature is turned on. See Turning HDMI-CEC Control

on or off on page 46.

•Make sure that Device Auto Power Off is set to On. See

Turning Device Auto Power Off on or off on page 47.

• The device may not support this feature. See the documentation that came with the device for more information.

Problem Solution

My TV does not turn on when I turn on my device.

I cannot select the Root Menu option.

OR The device’s

root menu does not open when I select Root

Menu.

Note

If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again.

• Make sure that the HDMI-CEC Control feature is turned on. See Turning HDMI-CEC Control

on or off on page 46.

•Make sure that TV Auto Power On is set to On. See Turning TV

Auto Power On on or off on

page 47.

• The device may not support this feature. See the documentation that came with the device for more information.

www.tv.toshiba.com

Page 86

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Specifications

Specifications are subject to change without notice.

Dimensions and weight

28L110U 32L110U

15.4 × 25.4 × 3.7 in.

Without stand

With stand 16.7 × 25.4 × 7.1 in

(39 × 64.4 × 9.5 cm )

8.8 lbs. (4 kg)

(42.3 × 64.4 × 18.1 cm )

9 lbs. (4.1 kg)

Screen

28L110U 32L110U

Screen size measured diagonally

Display type LED LED

Screen refresh rate

Display resolution

Panel resolution

Aspect ratio 16:9 16:9

Contrast ratio (typical)–panel

Dynamic contrast ratio– list value

TV Brightness (minimum) cd/m2

Comb filter 3d y/c digital 3d y/c digital

Response time 6.5 ms 9 ms

Horizontal viewing angle

Vert ical viewing angle

27.5 in. 31.5 in.

60Hz 60Hz

720p 720p

1366 (H) × 768 (V) 1366 (H) × 768 (V)

3,000:1 5,000:1

6,000,000:1 5,000,000:1

220 nits 200 nits

178° 178°

17.2 × 28.9 × 3.3 in.

(43.8 × 73.4 × 8.4 cm)

10.1 Ibs. (4.6 kg)

19.3 × 28.9 × 7.1 in.

(48.9 × 73.4 × 18 cm)

11 Ibs. (5 kg)

Inputs (both models)

2 (side)

HDMI

Component video 1 (back)

Composite video

Shared audio (component and composite)

PC/VGA No

3.5mm PC audio input No

DVI (shared with HDMI) HDMI IN 1 (DVI)

USB

Antenna/Cable 1 (back)

Supports JPEG and firmware upgrade

EDID compliant

HDCP compliant

1 (back)

Shared with component Y

Yes

1 (side)

Outputs (both models)

Video No

Analog audio/Headphone Yes

Digital audio 1 (optical) (back)

WiFi No

Ethernet No

Audio (both models)

DTS Tuning Package DTS TruSurround

Speakers

Number: 2

Watts per channel: 5W

Power

28L110U 32L110U

Power consumption

Power input AC120V 60Hz, 0.7A AC120V 60Hz, 0.8A

On: 32.5W

Standby: <0.5W

On: 38.2W

Standby: <0.5W

Display resolutions (both models)

HDMI suggested resolutions 720p, 480p, 480i

Component video suggested resolutions

720p, 480p, 480i

Tuner (b oth mod els)

Analog NTSC

Digital ATS C, 8 -VSB , Cl ear- QAM

www.tv.toshiba.com

Page 87

Toshiba 28"/32" 720p 60Hz LED TV

Miscellaneous

28L110U 32L110U

OSD languages English, French, Spanish English, French, Spanish

HDMI CEC Yes Yes

Game Mode Yes Yes

GameTimer™ Ye s Yes

ENERGY STAR qualified

Internet connectable

TV base screws M4 type (20 mm length) (4 pcs)

V-Chip (version 2.0)

No No

M4 type (8 mm length) (4 pcs)

M5 type (12 mm length) (2 pcs)

Yes Yes

Sleep timer Yes Yes

Channel labeling

No No

VESA mount (mm)

(hor. × ver.)

VESA mount screws

100 × 100 200 × 200

M4 type M6 type

Note

The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths.

Cables

Connections to this device must be made with shielded cables with metallic RF/EMI connector hoods to maintain compliance with FCC Rules and Regulations.

Canadian Notice

CAN ICES-3 (B)/NMB-3(B) Standard Television Receiving Apparatus — Appareil de réception

télévision ordinaire, Canada BETS-7 / NTMR-7

IC Statement

This device complies with Industry Canada licence—exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.

Dolby License Notice and Trademark Acknowledgement

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

HDMI®

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

DTS TruSurround™

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.

Legal notices

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Wa rni ng

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Open Source

This production contains Bitstream Vera Sans fonts under the following copyright:

www.tv.toshiba.com

Page 88

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

One-year limited warranty Toshiba Televisions

Definitions:

Best Buy (“Warrantor”) warrants to you, the original purchaser of this new Toshiba-branded television (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”). For this warranty to apply, your Product must be purchased in the United States or Canada from a Best Buy authorized dealer of Toshiba brand products only that are packaged with this warranty statement.

How long does the coverage last?

The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. Your purchase date is printed on the receipt you received with the Product.

What does this warranty cover?

During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Warrantor repair center or store personnel, Warrantor will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Warrantor and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Toshiba Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.

How to obtain warranty service?

If you purchased the Product at a Best Buy retail store location and your television Product has a screen size of less than 42 inches, please take your original receipt and the Product to any Best Buy store. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. If you purchased the Product from a Best Buy online web site, mail your original receipt and the Product to the address listed on the web site. Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging.

To obtain in-home warranty service for a television with a screen 42 inches or larger, in the United States call 1-888-BESTBUY, Canada call 1-866-BESTBUY. Call agents will diagnose and correct the issue over the phone or will have an Toshiba-approved repair technician dispatched to your home.

• Outages, static or other problems with over-the-air reception of the television broadcast signals.

• Attempted repair by any person not authorized by Warrantor to service the Product.

• Products sold “as is” or “with all faults.”

• Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.).

• Products where the factory applied serial number has been altered or removed.

• Loss or Theft of this product or any part of the product

• Failures or Damage caused by any contact including but not limited to liquids, gels or pastes.

• Up to three (3) pixel failures (dots that are dark or incorrectly illuminated) grouped in an area smaller than one tenth (1/10) of the display size or up to five (5) pixel failures throughout the display. (Pixel based displays may contain a limited number of pixels that may not function normally.)

• Problems with delay in motion or action of video images while playing first-person style video games.

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. WARRANTOR SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. WARRANTOR MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

Product information: www.tv.toshiba.com Product support (855) 527-2411 For US and Canada This product is distributed and warranted by Best Buy Purchasing,

trademarks are property of their respective owners.

ColorMaster, DynaLight, GameTimer, Native Mode, Stable Sound, Surflock and TheaterWide are trademarks or registered trademarks of Toshiba America Information Systems, Inc.

Where is the warranty valid?

This warranty is valid only in the United States and Canada at Best Buy branded retail stores or websites to the original purchaser of the product in the county where the original purchase was made.

What does the warranty not cover?

This warranty does not cover:

• Customer instruction/education.

• Installation.

• Set up adjustments.

•Cosmetic damage.

• Damage due to acts of God, such as power surges.

•Accident(s).

• Misuse, unintentional or intentional.

• Abuse, unintentional or intentional.

•Negligence.

• Commercial purposes/use, including but not limited to use in a place of business or in communal areas of a multiple dwelling condominium or apartment complex, or otherwise used in a place of other than a private home.

• Modification of any part of the Product, including the antenna

• Damage due to incorrect operation or maintenance.

• Connection to an incorrect voltage or power supply.

www.tv.toshiba.com

Page 89

V1 ENGLISH

15-0349