Toshiba 27DF46 User Manual

27DF46

2006

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

J3W20521A(E)_COVER 14/03/2006, 2:06 PM1

Appendix

Dear Customer,

The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. DO NOT TRY TO SERVICE THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you that important operating and maintenance instructions follow this symbol.

Thank you for purchasing this Toshiba TV. This manual will

Important

help you use the many exciting features of your new TV.

Before operating the TV, please read this manual

Safeguards

completely, and keep it nearby for future reference.

Child Safety

It Makes A Difference

Safety Precautions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK.) NOUSER-SER VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

Where Your TV Stands

Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:

The Issue

 If you are like most consumers, you have a TV in your home.

Many homes, in fact, have more than one TV.

 The home theater entertainment experience is a growing

trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands.

 Sometimes TVs are improperly secured or inappropriately

situated on dressers, bookcases, shelves, desks, audio speakers, chests, or carts. As a result, TVs may fall over, causing unnecessary injury.

Toshiba Cares!

 The consumer electronics industry

is committed to making home

entertainment enjoyable and safe.

 The Consumer Electronics

Association formed the Home

Entertainment Support Safety

Committee, comprised of TV and consumer electronics furniture

manufacturers, to advocate

children’s safety and educate

consumers and their families about

television safety.

NOTE TO CATV INSTALLERS

This is a reminder to call the CATV system installer’s attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see items 25 and 26 on page 4.

NOTICE OF POSSIBLE ADVERSE EFFECTS

ON TV PICTURE DISPLAY

If a fixed (non-moving) pattern or image remains on the TV screen for extended periods of time, the image can become permanently ingrained in the cathode ray tube(s) of the TV and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. (See item 33 on page 4 for details.)

Tune Into Safety

 One size does NOT fit all! Use appropriate

furniture large enough to support the weight of your

TV (and other electronic components.)

 Use appropriate angle braces, straps, and anchors to secure

your furniture to the wall (but never screw anything directly into the TV.)

 Carefully read and understand the other enclosed

instructions for proper use of this product.

 Do not allow children to climb on or play with furniture

and TVs.

 Avoid placing any item on top of your TV (such as a VCR,

remote control, or toy) that a curious child may reach for.

 Remember that children can become excited while watching

a program and can potentially push or pull a TV over.

 Share our safety message about this hidden hazard of

home with your family and friends. Thank you!

2500 Wilson Blvd. Arlington, VA 22201 U.S.A. Tel. 703-907-7600 Fax 703-907-7690 www.CE.org

CEA is the Sponsor, Producer and

0303

Manager of the International CES

the

J3W20521A(E)_P02-06 14/03/2006, 2:08 PM2

QUALIFIED

SERVICE

TECHNICIAN

Safeguards

Important

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Wide plug

Installation, Care, and Service

Installation

Follow these recommendations and precautions and heed all warnings when installing your TV:

16) Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal Communications Commission.

17) DANGER: RISK OF SERIOUS PERSONAL

INJURY, DEATH, OR EQUIPMENT DAMAGE! Never place the TV on

an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

18) Never place or store the TV in direct sunlight; hot, humid areas; areas subject to excessive dust or vibration; or locations with temperatures at or below 41°F (5°C.)

19) Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit.

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

10) Protect the power cord from being

walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during

lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) CAUTION: To reduce the risk of electric shock, do

not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can

be inserted completely to prevent blade exposure.

20) Never place items such as vases, aquariums, or candles on top of the TV.

21) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV:

• on a bed, sofa, rug, or similar

surface;

• too close to drapes, curtains,

or walls; or

• in a confined space such as a

bookcase, built-in cabinet, or any other place with poor ventilation.

The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV.

22) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

23) Never overload wall outlets and extension cords.

0303

Setting up

your TV

Using the TV’s

Features

Appendix

J3W20521A(E)_P02-06 14/03/2006, 2:08 PM3

Ground clamp

Antenna discharge unit (NEC Section 810-20)

Grounding conductors (NEC Section 810-21)

Power service grounding electrode system (NEC Art 250 Part H)

Ground clamps

Antenna lead-in wire

Electric service equipment

QUALIFIED

SERVICE

TECHNICIAN

Important

24) Always operate this equipment from

Safeguards

a 120 V AC, 60 Hz power source only.

30) [This item applies to projection TVs only.] If the air temperature rises suddenly (for example, when the TV is first delivered), condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate.

25) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code.)

26) DANGER: RISK OF SERIOUS PERSONAL

INJURY OR DEATH!

• Use extreme care to make sure you are never in

a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits.

• Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.

Care

For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:

27) Always sit approximately 10–25 feet away from the TV and as directly in front of it as possible. The picture can appear dull if you sit too far to the left or right of the TV, or if sunlight or room lights reflect on the screen. Turn the TV off to check for reflections on the screen, and then remove the source of reflections while viewing the TV.

28) Always unplug the TV before cleaning. Never use liquid or aerosol cleaners.

31) For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.

32) During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center.

33) Possible Adverse Effects on TV Picture Display:

of damage is NOT COVERED BY YOUR WARRANTY.

Never leave the TV on for extended periods of time while it is displaying the following images or formats:

• Fixed Images, including but not limited to PIP/POP

windows, closed captions, video game patterns, TV station logos, stock tickers, and websites.

• Special Formats

that do not use the entire screen, including but not limited to widescreen or letterbox format media viewed on a 4:3 aspect ratio display (with gray or black bars at the top and bottom of the screen); or 4:3 aspect ratio format media viewed on a widescreen/16:9 aspect ratio display (with gray or black bars on the left and right sides of the screen.)

Service

34) WARNING: RISK OF ELECTRIC SHOCK! Never attempt to service the

TV yourself. Opening and

removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center.

35) If you have the TV serviced:

• Ask the service technician to use only replacement parts

specified by the manufacturer.

• Upon completion of service, ask

the service technician to perform routine safety checks to determine that the TV is in safe operating condition.

29) WARNING: RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of any kind into the TV cabinet slots.

J3W20521A(E)_P02-06 14/03/2006, 2:09 PM4

36) When the TV reaches the end of its useful life, ask a

qualified service technician to properly dispose of the TV. Improper disposal may result in a picture tube implosion and possible personal injury.

0303

Important Safeguards .............................................................................................................2-4

Welcome to Toshiba ................................................................................................................... 6

Exploring your new TV ......................................................................................................................................... 6

Selecting a location for the TV.............................................................................................................................. 6

Connecting your TV ................................................................................................................... 7

Connecting a VCR................................................................................................................................................ 7

Connecting a cable converter box or Antenna ..................................................................................................... 8

Connecting a DVD player/satellite receiver and a VCR ....................................................................................... 9

Connecting a DVD player with ColorStream Connecting a DTV receiver / set-top box with ColorStream

Connecting a camcorder .................................................................................................................................... 12

Connecting an audio system .............................................................................................................................. 13

Connecting an AV amplifier with built-in digital surround .................................................................................... 13

(component video) and a VCR ................................................... 10

(component video) and a VCR ............................ 11

Using the remote control......................................................................................................... 14

Preparing the remote control for use .................................................................................................................. 14

Installing the remote control batteries ................................................................................................................ 14

Using the remote control to operate your other devices..................................................................................... 14

Programming the remote control to operate your other devices ........................................................................ 15

Device code tables ............................................................................................................................................. 16

Learning about the remote control ..................................................................................................................... 18

Setting up your TV ................................................................................................................... 19

Starting setup ..................................................................................................................................................... 19

Changing the on-screen display language ......................................................................................................... 19

Adding channels to the TV’s memory ................................................................................................................. 20

Using the TV’s features ........................................................................................................... 21

Adjusting the channel settings ............................................................................................................................ 21

Using the LOCKS menu ..................................................................................................................................... 22

Selecting a password ................................................................................................................................. 22

Using the V-Chip (parental control) feature................................................................................................ 23

Locking channels ....................................................................................................................................... 24

Locking the video inputs ............................................................................................................................ 25

Setting the GameTimer

Using the front panel lock feature .............................................................................................................. 26

Labeling channels .............................................................................................................................................. 26

Selecting the video input source ........................................................................................................................ 27

Setting the clock ................................................................................................................................................. 27

Setting the ON/OFF timer ................................................................................................................................... 27

Viewing the wide-screen picture formats ............................................................................................................ 28

Adjusting the picture ........................................................................................................................................... 30

Adjusting the picture quality ....................................................................................................................... 30

Resetting your picture adjustments............................................................................................................ 30

Setting the sleep timer ........................................................................................................................................ 30

Using the closed caption feature ........................................................................................................................ 31

Using the CC advanced feature ......................................................................................................................... 31

Adjusting the sound ............................................................................................................................................ 32

Muting the sound ....................................................................................................................................... 32

Selecting stereo/SAP broadcasts .............................................................................................................. 32

Adjusting the sound quality ........................................................................................................................ 32

Selecting the audio languages ................................................................................................................... 33

Selecting the digital output format .............................................................................................................. 33

Using the StableSound

Using the surround sound feature.............................................................................................................. 34

Resetting your audio adjustments.............................................................................................................. 34

Checking the digital signal strength.................................................................................................................... 34

Displaying TV status information on-screen ....................................................................................................... 34

Auto power off .................................................................................................................................................... 35

Understanding the Power Return feature ........................................................................................................... 35

........................................................................................................................... 25

feature ................................................................................................................ 33

Appendix ................................................................................................................................... 35

Troubleshooting.................................................................................................................................................. 35

Specifications ..................................................................................................................................................... 36

Limited United States Warranty .......................................................................................................................... 37

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

J3W20521A(E)_P02-06 14/03/2006, 2:09 PM5

Appendix

Welcome to Toshiba

Congratulations! You have purchased one of the finest color TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. You may need to purchase other audio or video cables to connect your equipment. See “Connecting your TV” on page 7 for more information.

Please read all the safety and operating instructions carefully before you begin.

Exploring your new TV

You can operate your TV by using the buttons on the front panel or the

Toshiba

Welcome to

remote control. The front and back panels provide all the inputs you will need to connect other equipment to your TV.

TV front panel

POWER

Remote sensor

Power indicator

Channel ▲/▼

Volume

Audio(L/R)/Video In

▲/▼

The STARTING SETUP feature appears the first time you turn on the TV. See page 19 for details.

Notes:

• To open the menu system, you can either press MENU on the remote control or simultaneously press both VOLUME

▲

buttons (

• When a menu is open, to select the desired setting, you can use either the arrow buttons on the remote control or the CHANNEL ▲/▼ and VOLUME ▲/ buttons on the front panel.

and ▼) on the front panel.

▼

TV back panel

Selecting a location for the TV

• Place the TV on the floor or on a sturdy platform in a location where

light does not directly hit the screen.

• Place the TV far enough from the walls to allow proper ventilation.

Inadequate ventilation may cause overheating, which may damage the TV.

J3W20521A(E)_P02-06 14/03/2006, 2:09 PM6

OUT

VIDEO

IN from ANT

CH 3 CH 4

OUT to TV

AUDIO

Connecting your TV

• A coaxial cable is the standard cable that comes in from your

antenna or cable converter box. Coaxial cables use “F” connectors.

• Standard A/V (audio/video) cables are usually color coded accord-

ing to use: yellow for video and red and white for audio. The red audio cable is for the stereo right channel, and the white audio cable is for the stereo left (or mono) channel. If you look at the rear panel of the TV, you will see that the terminals are color coded in the same manner as the cables.

• S-video cables provide better picture performance than standard

video cables. S-video cables can only be used with S-video compatible components.

• Component video cables provide better picture performance than

S-video cables. Component video cables can only be used with component video compatible components.

• Digital audio coaxial cable is for use with digital audio equipment

that has digital audio output (see page 13.)

NOTICE: RISK OF EQUIPMENT DAMAGE!

Do not plug in any power cords until you have finished connecting all equipment.

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

ANTENNA

Coaxial Cable

AUDIO Cables

VIDEO

Cable

S-Video

Cable

Component video

Cables

DIGITAL AUDID

Coaxial Cable

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

You will need:

• two coaxial cables

• one set of standard A/V cables

Note:

If using a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. For better picture quality, if your VCR has S-video, you can use an S-video cable instead of the standard video cable. Do not connect both an S-video cable and a standard video cable at the same time or the picture performance will be unacceptable.

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

Cable Lead-in from cable box or antenna

J3W20521A(E)_P07-13 14/03/2006, 2:10 PM7

Stereo VCR

The unauthorized recording, use, distribution or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Appendix

Connecting a cable converter box or Antenna

This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device, which is generally provided by the cable company.

Option 1 : For Subscribers to Basic Cable TV Service

For basic cable service not requiring a Converter/Descrambler box, connect the incoming 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the television.

Option 2 : For Subscribers to Scrambled Cable TV Service

If you subscribe to a cable service that requires the use of a Converter/ Descrambler box, connect the incoming cable to the Converter/ Descrambler box and connect the output of the box to the Antenna Jack on the back of the television. Follow the connections shown below. Set the television to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels.

your TV

Connecting

Option 3 : For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels

If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require the use of a Converter/ Descrambler box, you may wish to use a two-set signal splitter (sometimes called a “two-set coupler”) and an A/B Switch box from the cable installer or an electronics supply store. Follow the connections shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the “A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the box to tune scrambled channels.

Note:

When you use a converter box with your TV, there may be features that you cannot program using the remote control, such as labeling channels, blocking channels, and programming your favorite channels.

From Cable

Option 1:

Option 2:

Option 3:

Converter/Descrambler

Converter/Descrambler;

Splitter A / B Switch

J3W20521A(E)_P07-13 14/03/2006, 2:10 PM8

Connecting a DVD player/satellite receiver

Satellite IN

OUT

VIDEO AUDIO

OUT to TV

OUT

VIDEO AUDIO

IN from ANT

CH 3 CH 4

OUT to TV

and a VCR

This connection allows you to watch DVD/satellite, VCR, or TV programs. You can record from the satellite receiver and TV, as well as record one TV channel while watching another channel.

From satellite

DVD player / Satellite Receiver

You will need:

• three coaxial cables

• two sets of standard A/V cables

Note:

Safeguards

Important

Welcome to

Toshiba

Stereo VCR

Connecting

your TV

Remote Control

Using the

Setting up

your TV

J3W20521A(E)_P07-13 14/03/2006, 2:11 PM9

Using the TV’s

Features

Appendix

Connecting a DVD player with ColorStream

OUT

VIDEO

IN from ANT

CH 3 CH 4

OUT to TV

AUDIO

OUT

AUDIO

OUT

VIDEO

COMPONENT VIDEO

S-VIDEO

(component video) and a VCR

This connection allows you to watch DVD, VCR, or TV programs and record TV programs. You can record from one source while watching a program from another source. Your TV is capable of using ColorStream (component video.) Connecting your TV to a component video compatible DVD player, such as a Toshiba DVD player with ColorStream®, can greatly enhance picture quality and performance.

your TV

Connecting

From antenna

DVD player with Component video

Stereo VCR

You will need:

• two coaxial cables

• one set of standard A/V cables

• one set of component video cables

• one pair of standard audio cables

Note:

The ColorStream inputs on this TV are for use with devices that output 480i interlaced signals ONLY. This TV will not accept or display 480p or 720p progressive scan signals or 1080i interlaced high-definition signals. If you connect a high-definition settop receiver, 480p progressive scan DVD player, or other similar device to the TV’s ColorStream inputs, YOU MUST SWITCH THE DEVICE’S OUTPUT TO 480i INTERLACED MODE FIRST. Failure to do this will display “Colorstream” on a black screen.

J3W20521A(E)_P07-13 14/03/2006, 2:11 PM10

AUDIO

OUT

S-VIDEO VIDEO

OUT

COMPONENT VIDEO

OUT

VIDEO

IN from ANT

CH 3 CH 4

OUT to TV

AUDIO

Connecting a DTV receiver / set-top box with ColorStream

(component video) and a VCR

Safeguards

Important

This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV and TV programs. Your TV has ColorStream

(component video) inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism.

From Antenna

Stereo VCR

You will need:

• three coaxial cables

• two sets of standard A/V cables

• one set of standard audio cables

• one set of component video cables

Note:

You can connect the component video cables to either set of ColorStream jacks on the TV. If your DTV receiver does not have component video, use the S-video and standard audio connections instead. Do not connect both an S-video and a standard video cable at the same time or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

From DTV Antenna

DTV Receiver with Component video

Setting up

your TV

Using the TV’s

Features

Appendix

J3W20521A(E)_P07-13 14/03/2006, 2:11 PM11

Connecting a camcorder

VIDEO

AUDIO L

OUT

S-VIDEO

VIDEO

AUDIO L

OUT

S-VIDEO

This connection allows you to watch videos recorded on a camcorder.

You will need:

• one S-video cable or standard video cable

• one pair of standard audio cables

your TV

Connecting

Front Panel of TV

VHS Camcorder

S-VHS Camcorder

Note:

For better picture quality, if your camcorder has S-video, you can use an S-video cable (plus the standard audio cables) instead of a standard video cable. Do not connect both a standard video cable and an S-video cable at the same time or the picture performance will be unacceptable.

Back panel of TV

J3W20521A(E)_P07-13 14/03/2006, 2:12 PM12

Digital Audio Coaxial

Connecting an audio system

You will need:

• one set of standard audio cables

Back panel of TV

Amplifier

LINE IN LR

Connecting an AV amplifier with built-in digital surround

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

This connection allows you to use an audio amplifier with built-in digital surround and external speakers.

Front

Speaker

(Left)

AV Amplifier with built-in digital surround

You will need:

• one coaxial digital cable

• Six sets of speaker cables

Note:

For additional information, please refer to your amplifier owner’s manual.

Surround Speaker (Left)

Subwoofer

Center Speaker

Front Speaker (Right)

Surround Speaker (Right)

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

The COAXIAL DIGITAL AUDIO OUT jack outputs digital audio only during digital broadcasts with digital audio. To hear analog broadcast audio, you also must connect analog audio cables from the L/R ANALOG AUDIO jacks to the receiver’s inputs. Consult the owner’s manual for your receiver to determine the best way to switch between the analog and digital signals.

J3W20521A(E)_P07-13 14/03/2006, 2:12 PM13

Appendix

Using the remote control

Preparing the remote control for use

With the remote control, you can operate your TV, most cable TV converters/satellite receivers, VCRs, and DVD players together, even if they are different brands. In addition to operating the TV, the remote control can operate most cable TV converters, satellite receivers, VCRs, and DVD players, regardless of their brand. The remote control is pre-programmed to operate most Toshiba satellite receivers, VCRs, and DVD players. To control a non-Toshiba device (or a Toshiba device that the remote control is not pre-programmed to operate), you must first program the remote control. See “Programming the remote control to operate your other devices” on the next page.

Installing the remote control batteries

To install the batteries:

1. Open the battery cover on the back of the remote control.

2. Install two “AAA” size batteries. Match the + and – signs on the batteries to the signs on the battery compartment.

Using the

Remote Control

3. Close the battery cover on the remote control until the lock snaps.

Note:

The TV remote control may not operate your VCR, DVD player, or cable TV converter. Refer to the owner's manual supplied with your other devices to see which features may be available. Additionally, the remote control for this TV may not support certain features available on the original remote controls for your other devices, in which case it is suggested that you use the original remote control for the applicable device.

Caution:

• Never throw batteries into a fire.

Notes:

•

Be sure to use AAA size batteries.

•

Dispose of batteries in a designated disposal area.

•

Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.

•

If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones.

•

When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination.

•

Always remove the batteries from the remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.

Using the remote control to operate your other devices

To control a cable TV converter/satellite receiver:

Program the remote control to recognize the brand of your cable TV converter/satellite receiver (see “Programming the remote control to operate your other devices” on page 15.) The buttons shown at right will control the cable TV converter/ satellite receiver. Press “CBL/SAT” first.

Power

Input (TV)

Mute (TV)

Channel

Numbers CH RTN

(Channel Return)

Channel 34

CBL/SAT

Volume +/- (TV)

Pic Size (TV)

TV/VCR

To control a VCR:

Program the remote control to recognize the brand of your VCR (see “Programming the remote control to operate your other devices” on page 15.) The buttons shown at right will then control the VCR. Press “VCR” first.

Input (TV)

Power

Channel

Numbers CH RTN

(Channel Return)

VCR

Channel 34

Volume +/- (TV)

Pic Size (TV)

VCR controls

J3W20521A(E)_P14-21 14/03/2006, 2:12 PM14

Safeguards

Important

To control a DVD player:

Program the remote control to recognize the brand of your DVD player (see “Program remote control operate your other devices” below.) The buttons shown at right will then control the DVD player. Press “DVD” first.

ming the

Volume +/- (TV)

DVD Skip/Search

Power

Input (TV)

Recall

Mute (TV)

Number

buttons

DVD

Pic Size (TV)

DVD MENU

▼

▲▼

ENTER

DVD controls

TOP Menu DVD Clear

▼

Programming the remote control to operate your other devices

This remote control is pre-programmed to operate most Toshiba satellite receivers, VCRs, and DVD players. To control a non-Toshiba device (or a Toshiba device that the remote control is not pre-programmed to operate), you must follow the steps below to program your remote control.

1. Refer to the code tables (on pages 16 and 17) to find the corresponding code for your device. If more than one code is listed, try each one separately until you find the one that works.

2. If you are programming the remote control to operate your:

• Cable TV converter/satellite receiver: Press “CBL/SAT.”

• VCR: Press “VCR.”

• DVD player: Press “DVD.”

3. While holding down RECALL, press the Channel Number buttons to enter the three-digit code for your device within 10 seconds.

Note:If you do not enter the code within 10 seconds from step 3,

or if you enter the wrong code, this operation is canceled.

4. Point the remote control at the cable TV converter/satellite receiver, VCR or DVD player, and press POWER to test the code.

• If the device responds, you entered the correct code.

If the device does not respond, repeat steps 1–4 using another code.

•

5. Press “TV” to control the TV.

For future reference, write down the codes you used: Cable TV converter/satellite receiver code _____________________ VCR code ______________________________________________ DVD player code _________________________________________

Recall

Channel Numbers

TV VCR

DVD CBL/SAT

Notes:

• When shipped from the factory, the remote control is set to operate your TV.

• Each time you replace the batteries, you must reprogram the remote control.

• Some newer VCRs are capable of working on either of two remote codes. These VCRs have a switch labeled “VCR1/VCR2.” If your VCR has this kind of switch and does not respond to any of the codes for your VCR, set the switch to the other position (VCR1 or VCR2) and reprogram the remote control.

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

Appendix

J3W20521A(E)_P14-21 14/03/2006, 2:13 PM15

Brand Code Brand Code

Device code tables

[For CBL/SAT Mode] CABLE Box

Brand Code

ABC

Archer Cableview Century Citizen Contec

Diamond Eagle GE Gemini General Instruments Hamlin Hitachi Jasco

061, 062, 063, 082, 084, 087, 091, 092, 096, 098 065, 092, 097, 099 064, 094 092 090, 092, 097 083, 085, 086, 088, 093, 098 093 091 061, 062 069, 070, 094 062, 089, 096 093 062, 095, 096 097

Jerrold

Magnavox Memorex Multi Canal Novavision Panasonic Philco Philips

Pioneer Proscan Radio Shack RCA Realistic Recoton Samsung

062, 069, 071, 082, 086, 089, 091, 096 072, 096 091, 092, 104 090 101 081, 083, 085 087 066, 067, 068, 070, 072, 073, 074, 075, 091, 092 076, 077 061, 062 092, 097, 099 064, 081 065 102 077, 090

Scientific Atlanta

Sears Signature Signature 2000 Sprucer Starcom

Stargate Sylvania TeleView Texscan Tocom U. S. Electronics United Cable Universal

Wards

063, 078, 079, 080, 088, 098, 101, 105 095 062 096 081, 085 069, 082, 087, 096, 103, 104 069, 090 095, 100 090 100 071, 084, 085 087, 096, 098 082 065, 092, 097, 099, 102, 103 096

Brand Code Brand Code

[For VCR Mode] VCR

Brand Code

Admiral Aiko Aiwa Akai

Audiovox Bell & Howell Broksonic Calix Carver CCE Citizen

Colortyme Craig

Curtis Mathes

Daewoo

Daytron Denon Dimensia Electrohome Emerson

Fisher

049 019 018 003, 004, 037, 038, 039, 058, 069 010 007, 068 008, 017 010 026 019 009, 010, 011, 012, 013, 014, 015, 019, 057, 073 005 009, 010, 016, 061, 065, 079 001, 005, 009, 012, 014, 040, 048, 053, 056, 057 011, 013, 015, 017, 018, 019, 057, 078 078 063 001, 048 010, 020, 065 003, 008, 010, 011, 017, 018, 020, 028, 039, 054, 057, 062, 065, 068, 072 007, 016, 021, 022, 023, 057, 064, 068, 070, 071, 079

Fuji Funai Garrard GE

Go Video Goldstar

Gradiente Harman Kardon Hitachi

JBL JC Penney

Jensen JVC

Kenwood

Kodak LG Lloyds Logik LXI Magnasonic Magnavox

004, 041 018, 073 018 001, 002, 009, 040, 042, 048, 056 056, 059, 061, 081 005, 010, 014, 054, 056, 065, 067 018, 065 005 024, 025, 035, 037, 042, 063, 070, 080 076 005, 006, 007, 008, 009, 010, 023, 024, 025, 026, 035, 056, 061, 063, 065 024, 025, 037 005, 006, 007, 014, 037, 043, 062, 063, 068, 082 005, 006, 007, 012, 014, 037, 043, 053, 068, 071 010 010 053, 073, 079 061 010 061, 065, 078 026, 027, 034, 044, 057, 061, 072

Marantz

Memorex

MGA MGN Minolta Mitsubishi

Montgomery Ward Motorola MTC Multitech NEC

Nikko Noblex Optimus Optonica Orion

Panasonic

Pentax

Pentex Research Philco Philips Pioneer

005, 006, 007, 012, 014, 026, 053, 067 007, 009, 010, 016, 018, 034, 049, 063, 065, 066, 068, 075, 079 020, 028, 039 056 024, 025, 035, 063 020, 024, 025, 028, 039, 043, 065 049 049 009, 046, 061 009, 012, 018 005, 006, 007, 012, 014, 037, 043, 053, 054, 067, 070 010 009 010, 049, 065 031 054, 057, 062, 065, 068, 072 036, 045, 046, 057, 061, 072, 079 012, 024, 025, 035, 042, 053, 063 014 026, 027, 063 026, 031, 044, 057 006, 024, 043, 055

Brand Code Brand Code

Satellite

Brand Code

Alphastar Chaparral DISH Network Drake

Echostar Express Vu Fujitsu GE General Instruments

Hitachi Hughes

038, 059 034 057 020, 040, 044, 046, 050, 053 018, 041, 051 057 027 008, 009, 013 010, 011, 012, 022, 023, 031, 049 033 033

Hughes Network Systems Intersat Janeil JVC Kenwood Magnavox Optimus Pansat Primestar Proscan Radio Shack RCA

019

048 027 017, 057 029 060 058 036, 052 015, 042 008, 009, 013 022, 023, 030 008, 009, 013, 016

Realistic Samsung Sony Star Choice Star Trak STS Toshiba

Uniden

Zenith

030 059 014, 055 057 025, 026, 037, 054 024 000, 001, 002, 003, 004, 005, 006, 007, 020, 031, 056 021, 028, 030, 032, 035, 039, 043, 045, 047, 058 027

Using the

Remote Control

J3W20521A(E)_P14-21 14/03/2006, 2:13 PM16

Brand Code Brand Code

VCR (Continued)

Brand Code

Portland Proscan Proton Quasar Radio Shack Radio Shack/ Realistic

Radix RCA

Realistic

Ricoh Runco Samsung

Sansui

012, 013, 015 001, 002, 048 061 045 010, 031, 065 007, 009, 010, 016, 018, 020, 021, 022, 031, 049 010 001, 002, 003, 009, 024, 025, 029, 035, 040, 042, 045, 048, 055, 056, 063, 071, 083 007, 009, 010, 011, 016, 018, 020, 021, 022, 031, 049, 051, 056, 060, 065, 075, 079 047 034 009, 011, 038, 056, 073, 084 006, 037, 043, 061

007, 009, 016, 054, 064, 068, 071, 075, 079, 085 008, 011, 017, 028, 030, 057, 065, 072 007, 010, 016, 021, 022, 023, 024, 025, 035, 053, 057, 063, 064, 065, 068, 071, 075, 079 013, 020, 031, 049, 051, 060, 066 004, 025, 032, 061 049 075 047, 061 004, 032, 033, 041, 052, 058, 070, 074, 076, 077, 080 035 018, 026, 027, 028, 044, 072 018, 051, 053, 073, 079 007

Sanyo

Scott

Sears

Sharp

Shintom Signature Signature 2000 Singer Sony

STS Sylvania

Symphonic

Tandy

Tashiko Tatung Teac Technics Teknika Toshiba

Totevision Unitec Unitech Vector Research

Video Concepts

Wards

White Westinghouse XR-1000 Yamaha

Zenith

010 037 018, 029, 037 036 010, 018, 065 000, 011, 021, 023, 024, 028, 030, 039, 057, 074, 078, 079 009, 010, 065 073 009 005, 006, 011, 012, 053 005, 006, 011, 012, 039, 053 009, 010, 011, 016, 018, 020, 024, 025, 031, 035, 049, 051, 056, 057, 060, 065, 066, 079 073 018 005, 006, 007, 014, 037, 053 004, 032, 034, 041, 047, 069, 086

Brand CodeCode Brand Code

TV/VCR Combo

Brand

Action GE Goldstar Panasonic

078 059, 062 065 065

078 065 079 074

Precision Quasar Realistic Sony

Toshiba Zenith Totevision

057 065 009, 010, 065

Brand Code Brand Code

Portable DVD

Brand Code

Aiwa Audiovox

093 094, 095

024, 096, 099Panasonic RCA 098

Brand Code Brand Code

HTIB

Brand Code

Lasonic 083 084Panasonic Venturer 085

Brand Code Brand Code

[For DVD Mode] DVD

Brand Code

Aiwa Apex BOSE Broksonic Clarion Classic Daewoo Denon Emerson Fisher Funai GE Go Video GPX Hitachi

JVC

006, 015 016, 017 097 018 019 020 021 022, 023, 024, 025 026, 027 028 027 001, 029, 030 087 031 005, 032, 033, 034, 035 003, 007, 036, 042, 088

037 008, 009 004, 038 039 040 026 041 043 044 058 010, 045, 046, 047, 048, 049, 050 004, 051 052, 053, 054, 055 001, 056 057, 058 001, 002, 059, 089

Kenwood Konka Magnavox Memorex Mintek NAD Nakamichi Norcent Onkyo Oritron Panasonic

Philips Pioneer Proscan Qwestar RCA

Sampo Samsung Sansui Sanyo Sharp Sherwood Sony

Sylvania Teac Technics Techwood Toshiba

Yamaha Zenith

060 061, 062, 086, 090 073 063, 091 064, 067 074 011, 012, 065, 066, 068, 069, 070 027 071 072 075 000, 013, 076, 077, 078 079, 080, 081 014, 082, 092

DVD Code

Brand VCR Code DVD Code

[For VCR and DVD Mode] DVD/VCR Combo

Brand VCR Code

Go Video JVC RCA

081 082 083

Samsung Sanyo Zenith

087 088 089

084 085 086

090 091 092

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Setting up

your TV

J3W20521A(E)_P14-21 14/03/2006, 2:13 PM17

Using the TV’s

Features

Appendix

Learning about the remote control

TV/VIDEO selects the video input source (page 25) RECALL displays status information on-screen (page 23) CHANNEL NUMBERS allow direct access to channels (page 20)

CH TV selects TV mode

3 /

4 cycles through programmed channels (page 20)

CBL/SAT selects CBL/SAT mode (page 14) SLEEP programs the TV to turn off at a set time (page 30) POWER turns the TV on and off MUTE turns off the sound (page 24) CH RTN (Channel Return) returns to the last viewed channel

(page 21)

VOL +/- adjusts the volume level VCR selects VCR mode (page 14) DVD selects DVD mode (page 15)

PIC SIZE cycles through the three picture sizes—4:3, 16:9, ZOOM.

(page 28)

FAV ▲ / ▼ (Favorite Channels) cycles through the channels you

programmed as favorite channels (page 21)

MENU/ENTER accesses the menu system; also sets menu

Using the

selections (page 19)

EXIT closes on-screen menus (page 19)

Remote Control

DVD MENU accesses the DVD menu

TV/Video

Recall

Channel

Numbers

Channel 3 /4

CBL/SAT

Sleep

DVD Menu

Enter

Pause

Skip/Search

4¢

Rew

TOP Menu

Rec

POWER Mute

CH RTN (Channel Return)

Volume +/VCR

DVD

Picture Size FAV ▲▼

(Favorite Channels) Menu/Enter

Exit Play Stop

FF TV/VCR

Clear

PAUSE pauses a videotape/DVD SKIP/SEARCH skips DVD chapter REW rewinds a videotape/DVD TOP MENU accesses the DVD TOP menu REC starts recording a videotape PLAY plays a videotape/DVD STOP stops a videotape/DVD FF fast forwards a videotape/DVD TV/VCR toggles between TV and VCR modes when viewing

while recording

CLEAR clears input data in DVD mode

J3W20521A(E)_P14-21 14/03/2006, 2:13 PM18

Setting up your TV

SETUP

LANGUAGE

CLOCK SET TV / CABLE CH PROGRAM ADD / ERASE

ENGLISH

CABLE

:SELECT :ADJUST

:SELECT ENTER : SET

LANGUAGE / LANGUE / IDIOMA

ENGLISH

FRANÇAIS ESPAÑOL

After you have installed the batteries and programmed the remote control, you need to set some preferences on the TV using the menu system. You can access the menu system with the buttons on the remote control.

• When you make a menu selection, your changes occur

immediately. You do not have to press MENU or EXIT to save your changes.

• After 15 seconds, the menu screen will automatically close if you

do not make a selection. Your changes will still be saved.

• When you are finished programming the menus, press EXIT.

Safeguards

Important

Welcome to

Toshiba

Starting setup

The STARTING SETUP feature appears the first time you turn on the TV, and helps you select the menu language, specify the TV/CABLE setting, and program channels automatically.

IMPORTANT: You must connect an antenna or cable TV system first. See “Connecting your TV” on pages 7-13 for details.

1. Press POWER to turn on the TV. The STARTING SETUP function begins and the language setup menu appears on the screen. Press ▲ or ▼ to select your desired language, then press ENTER.

2. Press ▲ or ▼ to select TV or CABLE, then press ENTER.

3. Press ▲ or ▼ to select START, and then press ENTER, which starts the AUTO SETUP.

Note:

To cancel the setup and return to the regular TV screen, press or ▼ to select CANCEL and press ENTER.

4. When the AUTO SETUP is complete, the regular TV screen appears.

Note:

• AUTO SETUP of channels may take 15–30 minutes to complete,

depending on your regional cable service.

• To cancel the AUTO SETUP and return to the regular TV screen,

press EXIT.

▲

POWER

Menu/Enter

Exit

Connecting

your TV

Remote Control

Using the

Setting up

your TV

Changing the on-screen display language

You can choose from three different languages (English, French, and Spanish) for the on-screen displays of adjustment menus and messages.

To select a language:

1. Press MENU, then press until the SETUP menu appears.

2. Press ▲ or ▼ to highlight LANGUAGE.

3. Press

J3W20521A(E)_P14-21 14/03/2006, 2:14 PM19

or to highlight your desired language.

ENGLISH

CABLE

:SELECT :ADJUST

Using the TV’s

Features

Appendix

Adding channels to the TV’s memory

SETUP

LANGUAGE

CLOCK SET TV / CABLE CH PROGRAM ADD / ERASE

ENGLISH

CABLE

:SELECT :ADJUST

SETUP

LANGUAGE

CLOCK SET TV / CABLE CH PROGRAM ADD / ERASE

ENGLISH

TV / CABLE

:SELECT :ADJUST

When you press Channel ▲ / ▼ on the TV or CH 3 / 4 on the remote control, your TV will stop only on the channels you have programmed into the TV's channel memory. Follow the steps below to program channels into the channel memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase channels manually.

To add channels automatically:

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

your TV

Setting up

1. Press MENU, then press

or to display the SETUP menu.

2. Press ▲ or ▼ until the TV/CABLE selection is highlighted.

3. Press or to highlight either TV or CABLE, depending on which you use. If you use an antenna, choose TV. If you use cable, choose CABLE.

4. Press ▼ until the CH PROGRAM selection is highlighted.

Press or to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears.

When channel programming is complete, the message “COMPLETED” appears.

7. Press CH 3 or 4 to view the programmed channels.

1. Press MENU, then press

or to display the SETUP menu.

2. Press ▲ or ▼ until the ADD/ERASE selection is highlighted.

3. Press

or to display the ADD/

ERASE menu.

4. Press ▲ or ▼ to select ADD/ERASE, then press

5. Select the desired channel to be memorized or deleted using ▲ or ▼. Press

or to select either ADD or

ERASE.

6. Repeat step 5 for other channels you want to add or erase, then press ENTER.

7. Press EXIT to return to the normal screen.

Note:

If the desired channel is not stored in the channel memory, add the channel manually (see “Adding and erasing channels manually,” below).

Channel Numbers

Channel 34

Exit

J3W20521A(E)_P14-21 14/03/2006, 2:14 PM20

To erase all channels from the channel memory:

Press ▲ or ▼ to select CLEAR ALL in step 4 above, then press ENTER. All channels are erased from the channel memory. (You can still use the Channel Numbers on the remote control to tune a channel.)

Changing channels

To change to the next programmed channel:

Press Channel ▲ / ▼ on the TV or CH 3 / 4 on the remote control.

To change to a specific analog channel:

Press the Channel Number buttons (0-9) on the remote control. For example, to select channel 125, press 1, 2, 5.

To change to a specific digital channel:

Press the first 3 digits, then press 100, followed by the remaining 3 digits. For example, to select channel 015-001, press 0, 1, 5, 100, 0, 0, 1.

Note:

Digital cable channels may be represented by channel numbers that include a “dash” (e.g., 85–002). These digital channel numbers may not match the numbers in the channel line-up provided by your cable company. This is not a malfunction.

Using the TV’s features

OPTION

ON/OFF TIMER FAVORITE CH CH LABEL

OFF

:SELECT :ADJUST

FAVORITE CH:CH 2

SET / CLEAR TV CABLE

000 000

000

OPTION MENU

ENTER:SET EXIT:END

:SELECT :ADJUST

FAVORITE CH:CH 2

SET / CLEAR TV CABLE

002 0 0

000

OPTION MENU

ENTER:CLEAR EXIT:END

:SELECT :ADJUST

Adjusting the channel settings

Switching between two channels

You can switch between two channels without entering an actual channel number each time.

To switch between two channels:

1. Select the first channel you want to view.

2. Select a second channel using the Channel Number buttons (0-9,

100.)

3. Press CH RTN. The previous channel will be displayed. Each time you press CH RTN, the TV will switch back and forth between the two channels.

Programming your favorite channels

You can preset up to 12 of your favorite channels using the Favorite Channel Programming feature. Because this feature scans through only your favorite channels, it allows you to skip other channels you do not normally watch.

You can still use Channel 3 / 4 to scan through all the channels you programmed in the TV’s memory or the Channel Numbers to directly tune a channel.

To program your favorite channels:

1. Select a channel you want to program as a favorite channel.

2. Press MENU, then press

3. Press ▲ or ▼ to highlight FAVORITE CH.

4. Press or to display the

FAVORITE CH menu. SET/CLEAR will be highlighted.

5. Press

or to highlight SET and

press ENTER.

6. Press EXIT to return to normal

viewing.

7. Repeat steps 1-6 for up to 12

channels.

or to display the OPTION menu.

Channel Numbers

CH RTN

Channel 34 Menu/

Enter

FAV ▲ ▼ Exit

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Setting up

your TV

To select your favorite channels:

Press the FAV ▲ ▼ buttons on the remote control to select your favorite channels. The FAV ▲ ▼ buttons will not work until you have programmed your favorite channels.

To clear your favorite channels:

1. Select a channel you want to clear.

2. Press MENU, then press

3. Press ▲ or ▼ to highlight FAVORITE CH.

4. Press or to display the FAVORITE CH menu. SET/CLEAR will

be highlighted.

5. Press

or to highlight CLEAR.

6. Press ENTER until “0” replaces the

channel number you want to erase.

7. Press EXIT to return to normal

viewing.

8. Repeat steps 1-6 for the other

channels.

J3W20521A(E)_P14-21 14/03/2006, 2:15 PM21

or to display the OPTION menu.

Note:

To return to the OPTION menu from the FAVORITE CH menu, press highlight OPTION MENU, then press

▲ or ▼

Using the TV’s

Features

Appendix

Using the LOCKS menu

LOCKS

NEW PASSWORD

[0-9]:SELECT ENTER: SET

EXIT :END

LOCKS

NEW PASSWORD

----

[0-9]:SELECT ENTER: SET

EXIT :END

LOCKS

CONFIRM PASSWORD

[0-9]:SELECT ENTER: SET

EXIT :END

Note: The V-Chip feature is available for the U.S. V-Chip system only. The Canadian V-Chip system is not supported.

You can prevent others from viewing certain programs or channels by blocking them using the V-Chip feature.

Selecting a password

Before you can use the V-Chip feature to block programs and channels, you must select a password. The password you select prevents others from changing the rating limits you set.

To select your password and access the LOCKS menu:

1. Press MENU, then press

2. Press ▲ or ▼ to display the password entering mode.

or to highlight the LOCKS menu.

Channel Numbers

Features

Using the TV’s

3. Use the Channel Number buttons (0-9) to enter your password. If you are accessing the LOCKS menu for the first time, select a four-digit number to be your password. Press ENTER.

4. Enter the password again to confirm it, and then press ENTER. The LOCKS menu appears.

5. You may now set up the LOCKS menu. See “Using the V-Chip (parental control) feature” (page 23), “Locking channels” (page 24), “Locking the video inputs” (page 25), “Setting the GameTimer (page 25), and “Using the front panel lock feature” (page 26.)

To change your password:

1. Press MENU, then press

or to display the LOCKS menu.

2. Press ▲ or ▼ to display the password entering mode.

3. Use the Channel Number buttons (0-9) to enter your password. Press ENTER. The LOCKS menu appears.

4. Press ▲ or ▼ to highlight NEW PASSWORD and press display the NEW PASSWORD menu.

5. Use the Channel Number buttons (0-9) to enter a new code. Press ENTER.

6. Enter the password again to confirm it, and then press ENTER.

7. Press EXIT to return to normal viewing.

or to

Menu/ Enter

Exit

”

J3W20521A(E)_P22-30 14/03/2006, 2:15 PM22

Using the V-Chip (parental control) feature

V-CHIP SET

TV RATING

MOVIE RATING

:SELECT :ADJUST

OFF OFF / TV-Y / TV-Y7 / TV-G

TV-PG / TV-14 / TV-MA

RATING SET

ON /OFF PG :: ON PG-13 :: ON R ON NC-17 :: ON X ON

:SELECT :ADJUST

The Motion Picture Association of America (MPAA) uses a rating system to qualify motion picture content. Television broadcasters also employ a rating system to qualify the content of television programs. The TV and MOVIE ratings work with the V-Chip feature and allow you to block programs according to the rating limits you set.

Safeguards

Important

To use the V-Chip to block programs by rating:

1.Press MENU, then press

or to display the LOCKS menu.

2.Press ▲ or ▼ to display the password entering mode.

3.Use the Channel Number buttons (0-9) to enter your password. Press ENTER. The LOCKS menu appears.

4.Press ▲ or ▼ to highlight V-CHIP.

• Press

enable V-Chip program blocking by rating. Press

•

disable

or to highlight ON to

to highlight OFF to

V-Chip program blocking

LOCKS

V-CHIP

V-CHIP SET V-CHIP SET (DTV)

:SELECT :ADJUST

ON / OFF

by rating.

5.Press ▲ or ▼ to highlight V-CHIP SET. Then, press the V-CHIP SET menu.

Press ▲ or ▼ to highlight TV RATING.

or to display

LOCKS

V-CHIP

V-CHIP SET V-CHIP SET (DTV)

Then, press or to display the desired rating.

:SELECT :ADJUST

OFF : TV RATING is not set TV-Y : All children TV-Y7 : 7 years old and above TV-G : General audience TV-PG : Parental guidance TV-14 : 14 years old and above TV-MA : 17 years old and above

• When you select TV-Y7, TV-PG, TV-14, or TV-MA, press

RECALL to explain the rating. Press ▲ or ▼ to select the desired rating you want. Press

7.Press ▲ or ▼ to highlight MOVIE RATING. Then, press

or to select the setting ON or OFF.

or to display the RATING SET menu. Press ▲ or ▼ to select the desired rating, then press

or to select ON or OFF.

G:All ages PG : Parental guidance PG-13 :

Parental guidance less than 13 years old

Under 17 years old Parental guidance suggested

NC17 : 17 years old and above X:Adult only

When you try to view a program with a ratings block, a message will appear listing the program’s ratings. The program can still be viewed if you press MUTE and then enter your password to temporarily bypass the block.

Mute

Recall

Channel Numbers

Menu/ Enter

Exit

Notes:

• If you forget your password, press RECALL four times within five seconds while the TV is in password entering mode. This allows you to reset your password.

• You can use V-CHIP SET (DTV) function when the digital broadcasting with a new rating system is received on the TV.

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

J3W20521A(E)_P22-30 15/03/2006, 11:21 AM23

Appendix

+ 53 hidden pages