Toshiba 27AFX56 User Manual
Safeguards
Important
Welcome to
Toshiba
Connecting
your TV
Remote Control
Using the
Setting up
your TV
Using the TV’s
Features
27AFX56
2006
J3N12721A(E)_COVER.p65 2/12/05, 6:10 PM1
Appendix
Dear Customer,
Thank you for purchasing this Toshiba TV. This manual will
Important
help you use the many exciting features of your new TV.
Safeguards
Before operating the TV, please read this manual
completely, and keep it nearby for future reference.
Child Safety
It Makes A Difference
Where Your TV Stands
Safety Precautions
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning symbol in the triangle tells you that the
voltage inside this product may be strong enough to
cause an electric shock. DO NOT TRY TO SERVICE
THIS PRODUCT YOURSELF.
The exclamation mark in the triangle tells you that
important operating and maintenance instructions
follow this symbol.
CAUTION: To reduce the risk of electric shock, do not
use the polarized plug with an extension cord,
receptacle, or other outlet unless the blades can be
inserted completely to prevent blade exposure.
Congratulations on your purchase! As you enjoy
your new TV, keep these safety tips in mind:
The Issue
If you are like most consumers, you have a TV in your home.
Many homes, in fact, have more than one TV.
The home theater entertainment experience is a growing
trend, and larger TVs are popular purchases; however, they
are not always supported on the proper TV stands.
Sometimes TVs are improperly secured or inappropriately
situated on dressers, bookcases, shelves, desks, audio
speakers, chests, or carts. As a result, TVs may fall over,
causing unnecessary injury.
Toshiba Cares!
The consumer electronics industry
is committed to making home
entertainment enjoyable and safe.
The Consumer Electronics
Association formed the Home
Entertainment Support Safety
Committee, comprised of TV and
consumer electronics furniture
manufacturers, to advocate
children’s safety and educate
consumers and their families about
television safety.
NOTE TO CATV INSTALLERS
This is a reminder to call the CATV system installer’s
attention to Article 820-40 of the U.S. NEC, which provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry
as practical. For additional antenna grounding information,
see items 25 and 26 on page 4.
NOTICE OF POSSIBLE ADVERSE EFFECTS
ON TV PICTURE DISPLAY
If a fixed (non-moving) pattern or image remains on the
TV screen for extended periods of time, the image can
become permanently ingrained in the cathode ray
tube(s) of the TV and cause subtle but permanent ghost
images. This type of damage is NOT COVERED BY
YOUR WARRANTY. (See item 33 on page 4 for details.)
2
Tune Into Safety
One size does NOT fit all! Use appropriate
furniture large enough to support the weight of your
TV (and other electronic components).
Use appropriate angle braces, straps, and anchors to secure
your furniture to the wall (but never screw anything directly
into the TV).
Carefully read and understand the other enclosed
instructions for proper use of this product.
Do not allow children to climb on or play with furniture
and TVs.
Avoid placing any item on top of your TV (such as a VCR,
remote control, or toy) that a curious child may reach for.
Remember that children can become excited while watching
a program and can potentially push or pull a TV over.
Share our safety message about this hidden hazard of
home with your family and friends. Thank you!
2500 Wilson Blvd.
Arlington, VA 22201 U.S.A.
Tel. 703-907-7600 Fax 703-907-7690
www.CE.org
CEA is the Sponsor, Producer and
Manager of the International CES
0303
2
the
®
J3N12721A(E)_P02-06.p65 2/12/05, 6:11 PM2
Important Safety Instructions
QUALIFIED
SERVICE
TECHNICIAN
Installation, Care, and Service
Safeguards
Safeguards
Important
Important
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near
water.
6) Clean only with a dry cloth.
7) Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.
Wide plug
Installation
Follow these recommendations and precautions and heed all
warnings when installing your TV:
16) Never modify this equipment. Changes or modifications
may void: a) the warranty, and b) the user’s authority to
operate this equipment under the rules of the Federal
Communications Commission.
17) DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV on
an unstable cart, stand, or table. The TV
may fall, causing serious personal injury,
death, or serious damage to the TV.
18) Never place or store the TV in direct
sunlight; hot, humid areas; areas
subject to excessive dust or vibration;
or locations with temperatures at or
below 41°F (5°C).
19) Always place the TV on the floor
or a sturdy, level, stable surface that
can support the weight of the unit.
Welcome to
Toshiba
Connecting
your TV
Remote Control
Using the
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where it exits the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during
lightning storms or when
unused for long periods
of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
15) CAUTION: To reduce the risk of electric shock, do
not use the polarized plug with an extension cord,
receptacle, or other outlet unless the blades can
be inserted completely to prevent blade exposure.
20) Never place items such as vases,
aquariums, or candles on top of the TV.
21) Never block or cover the slots or
openings in the TV cabinet back,
bottom, and sides. Never place
the TV:
• on a bed, sofa, rug, or similar
surface;
• too close to drapes, curtains,
or walls; or
• in a confined space such as a
bookcase, built-in cabinet, or any
other place with poor ventilation.
The slots and openings are provided
to protect the TV from overheating
and to help maintain reliable
operation of the TV.
22) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
23) Never overload wall outlets and
extension cords.
0303
3
3
Setting up
your TV
Using the TV’s
Features
Appendix
J3N12721A(E)_P02-06.p65 2/12/05, 6:11 PM3
24) Always operate this equipment from
Ground clamp
Antenna discharge unit
(NEC Section 810-20)
Grounding conductors
(NEC Section 810-21)
Power service grounding
electrode system (NEC Art 250 Part H)
Ground clamps
Antenna lead-in wire
Electric service equipment
QUALIFIED
SERVICE
TECHNICIAN
Important
Safeguards
a 120V AC, 60 Hz power source only.
30) [This item applies to projection TVs only.] If the air
temperature rises suddenly (for example, when the TV is
first delivered), condensation may form on the lenses. This
can make the picture appear distorted or the color appear
faded. If this happens, turn off the TV for 6 to 7 hours to
allow the condensation to evaporate.
25) Always make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of the
National Electric Code).
26) DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH!
• Use extreme care to make sure you are never in
a position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines. Never locate the antenna
near overhead power lines or other electrical circuits.
• Never attempt to install any of the following during
lightning activity:
a) an antenna system; or b) cables, wires, or any home
theater component connected to an antenna or phone
system.
Care
31) For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna from the TV if you leave the TV unattended or
unused for long periods of time.
32) During normal use, the TV may make
occasional snapping or popping
sounds. This is normal, especially
when the unit is being turned on or
off. If these sounds become frequent
or continuous, unplug the power cord
and contact a Toshiba Authorized Service Center.
33) Possible Adverse Effects on TV Picture Display: If a
fixed (non-moving) pattern or image remains on the TV
screen for extended periods of time, the image can
become permanently ingrained in the cathode ray tube(s)
of the TV and cause subtle but permanent ghost images.
This type of damage is NOT COVERED BY YOUR
WARRANTY. Never leave the TV on for extended periods
of time while it is displaying the following images or
formats:
• Fixed Images, including but not limited to PIP/POP
windows, closed captions, video game patterns, TV
station logos, stock tickers, and websites.
• Special Formats that do not use the entire screen,
including but not limited to widescreen or letterbox
format media viewed on a 4:3 aspect ratio display (with
gray or black bars at the top and bottom of the screen);
or 4:3 aspect ratio format media viewed on a
widescreen/16:9 aspect ratio display (with gray or black
bars on the left and right sides of the screen).
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
27) Always sit approximately 10–25 feet away from the TV and
as directly in front of it as possible. The picture can appear
dull if you sit too far to the left or right of the TV, or if
sunlight or room lights reflect on the screen. Turn the TV
off to check for reflections on the screen, and then remove
the source of reflections while viewing the TV.
28) Always unplug the TV before
cleaning. Never use liquid or
aerosol cleaners.
29) WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind
into the TV cabinet slots.
Service
34) WARNING: RISK OF ELECTRIC
SHOCK! Never attempt to service the
TV yourself. Opening and
removing the covers may expose
you to dangerous voltage or other
hazards. Refer all servicing to a
Toshiba Authorized Service Center.
35) If you have the TV serviced:
• Ask the service technician to use only replacement parts
specified by the manufacturer.
• Upon completion of service, ask
the service technician to perform
routine safety checks to determine
that the TV is in safe operating
condition.
36) When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the TV.
Improper disposal may result in a picture tube implosion
and possible personal injury.
0303
4
4
J3N12721A(E)_P02-06.p65 2/12/05, 6:12 PM4
Important Safety Information .......................................................................................... 2-4
Welcome to Toshiba............................................................................................................ 6
Exploring your new TV ................................................................................................................................ 6
Selecting a location for the TV .................................................................................................................... 6
Connecting your TV ............................................................................................................ 7
Connecting a VCR .......................................................................................................................................7
Connecting a cable converter box ...............................................................................................................8
Connecting a DVD player/satellite receiver and a VCR ..............................................................................9
Connecting a DVD player with ColorStream® (component video) and a VCR............................................ 9
Connecting two VCRs ...............................................................................................................................10
Connecting a camcorder ........................................................................................................................... 10
Connecting an audio amplifier ...................................................................................................................10
Using the remote control...................................................................................................11
Preparing the remote control for use ......................................................................................................... 11
Installing the remote control batteries ....................................................................................................... 11
Using the remote control to operate your other devices ........................................................................... 11
Programming the remote control to operate your other devices ............................................................... 12
Device code tables ....................................................................................................................................13
Learning about the remote control ............................................................................................................ 15
Setting up your TV ............................................................................................................ 16
Changing the on-screen display language ................................................................................................ 16
Adding channels to the TV’s memory ........................................................................................................ 17
Programming channels automatically ................................................................................................17
Adding and erasing channels manually ............................................................................................. 17
Changing channels .................................................................................................................................... 17
Using the TV’s features .................................................................................................... 18
Adjusting the channel settings................................................................................................................... 18
Switching between two channels ....................................................................................................... 18
Programming your favorite channels .................................................................................................18
Using the LOCK menu............................................................................................................................... 19
Selecting a PIN code .......................................................................................................................... 19
Locking channels ................................................................................................................................20
Locking video input .............................................................................................................................20
Setting the GameTimerTM...........................................................................................................................21
Labeling channels ...................................................................................................................................... 22
Setting the clock ........................................................................................................................................ 23
Setting the ON/OFF timer ..........................................................................................................................23
Setting the ON timer ........................................................................................................................... 23
Setting the OFF timer .........................................................................................................................24
Adjusting the picture quality ......................................................................................................................25
Watching video input .................................................................................................................................25
Specifying the ColorStream® setting .........................................................................................................25
Displaying TV status information on-screen .............................................................................................. 25
Setting the sleep timer ...............................................................................................................................26
Using the closed caption feature ...............................................................................................................26
Changing the picture size ..........................................................................................................................26
Adjusting the sound ...................................................................................................................................27
Muting the sound ................................................................................................................................27
Selecting stereo/SAP broadcasts .......................................................................................................27
Adjusting the sound quality ................................................................................................................ 27
Using the BBE sound feature .............................................................................................................28
Using the surround sound feature ...................................................................................................... 28
Using the StableSound® feature .........................................................................................................28
Auto power off............................................................................................................................................29
Understanding the Power Return feature .................................................................................................. 29
Appendix ............................................................................................................................ 29
Troubleshooting ......................................................................................................................................... 29
Specifications.............................................................................................................................................30
Limited Canada Warranty ..........................................................................................................................31
Safeguards
Safeguards
Important
Important
Welcome to
Toshiba
Connecting
your TV
Remote Control
Using the
Setting up
your TV
Using the TV’s
Features
Appendix
J3N12721A(E)_P02-06.p65 2/12/05, 6:12 PM5
5
Welcome to Toshiba
Congratulations! You have purchased one of the finest color TVs on
the market. The goal of this manual is to guide you through setting up
and operating your Toshiba TV as quickly as possible.
You may need to purchase other audio or video cables to connect your
equipment. See “Connecting your TV” on page 7 for more information.
Please read all the safety and operating instructions carefully before
you begin.
Exploring your new TV
You can operate your TV by using the buttons on the front panel or the
Toshiba
Welcome to
remote control. The front and back panels provide all the inputs you will
need to connect other equipment to your TV.
POWER
TV front panel
TV back panel
POWER
Power indicator
Remote sensor
ANT (75Ω)
CHANNEL VOLUME
Volume 3/4
Channel 3/4
VIDEO
L/MONO
AUDIOS-VIDEO
R
VIDEO 1 VIDEO 2
VIDEO-3 IN
L/MONO
R
VIDEO
PHONES
AUDIO
Phones
Audio(L/R)/Video In
IN OUT
Y
B
P
P
R
VIDEO
L/MONO
AUDIO
R
Selecting a location for the TV
• Place the TV on the floor or on a sturdy platform in a location where
light does not directly hit the screen.
• Place the TV far enough from the walls to allow proper ventilation.
Inadequate ventilation may cause overheating, which may damage
the TV.
J3N12721A(E)_P02-06.p65 2/12/05, 6:12 PM6
6
Connecting your TV
• A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use “F” connectors.
• Standard A/V (audio/video) cables are usually color coded accord-
ing to use: yellow for video and red and white for audio. The red
audio cable is for the stereo right channel, and the white audio
cable is for the stereo left (or mono) channel. If you look at the rear
panel of the TV, you will see that the terminals are color coded in
the same manner as the cables.
• An S-video cable provides better picture performance than a
standard video cable. S-video cables can only be used with S-video
compatible components.
• Component video cables come in sets of three and provide the best
picture performance. Component video cables can only be used
with component video compatible components.
ANTENNA
Coaxial Cable
S-Video
Cable
NOTICE: RISK OF EQUIPMENT DAMAGE!
Do not plug in any power cords
until you have finished connecting
all equipment.
Safeguards
Important
Welcome to
Toshiba
Connecting
Connecting
your TV
your TV
AUDIO
Cables
VIDEO
Cable
Component video
Cables
Connecting a VCR
This connection allows you to watch local channels and video programs,
play or record on the VCR while watching TV, and record from one
channel while watching another channel.
TV
Cable Lead-in
from cable box
or antenna
ANT (75Ω)
IN from ANT
CH 3
CH 4
IN OUT
VIDEO
L/MONO
AUDIOS-VIDEO
R
VIDEO 1 VIDEO 2
OUT to TV
IN
OUT
VIDEO
Y
B
P
P
R
VIDEO
L/MONO
AUDIO
R
Stereo VCR
LR
AUDIO
You will need:
• two coaxial cables
• one set of standard A/V cables
Note:
If using a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
For better picture quality, if your VCR has
S-video, you can use an S-video cable
instead of the standard video cable. Do not
connect a standard video cable and an
S-video cable to VIDEO1 simultaneously.
The unauthorized recording, use, distribution or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of
the United States and other countries,
and may subject you to civil and criminal
liability.
Remote Control
Using the
Setting up
your TV
Using the TV’s
Features
Appendix
J3N12721A(E)_P07-17.p65 2/12/05, 6:13 PM7
7
Connecting a cable converter box
This television has an extended tuning range and can tune most cable
channels without using a cable company supplied converter box. Some
cable companies offer “premium pay channels” in which the signal is
scrambled. Descrambling these signals for normal viewing requires the
use of a descrambler device, which is generally provided by the cable
company.
For Subscribers to Basic Cable TV Service
For basic cable service not requiring a Converter/Descrambler box,
connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack
on the back of the television.
For Subscribers to Scrambled Cable TV Service
If you subscribe to a cable service that requires the use of a Converter/
Descrambler box, connect the incoming cable to the Converter/
Descrambler box and connect the output of the box to the Antenna
Jack on the back of the television. Follow the connections shown
below. Set the television to the output of the Converter/Descrambler
box (usually channel 3 or 4) and use the Converter/Descrambler box to
select channels.
your TV
Connecting
For Subscribers to Unscrambled Basic Cable with
Scrambled Premium Channels
If you subscribe to a cable service in which basic cable channels are
unscrambled and premium channels require the use of a Converter/
Descrambler box, you may wish to use a two-set signal splitter (sometimes called a “two-set coupler”) and an A/B Switch box from the cable
installer or an electronics supply store. Follow the connections shown
below. With the switch in the “B” position, you can directly tune any
nonscrambled channels on your TV. With the switch in the “A” position,
tune your TV to the output of the Converter/Descrambler box (usually
channel 3 or 4) and use the box to tune scrambled channels.
Note:
When you use a converter box with your TV,
there may be features that you cannot
program using the remote control, such as
labeling channels, blocking channels, and
programming your favorite channels.
Incoming CATV
Converter/Descrambler
Converter/Descrambler
/
B SwitchSplitter
A
IN OUT
ANT (75Ω)
A
B
VIDEO
L/MONO
AUDIOS-VIDEO
R
VIDEO 1 VIDEO 2
Y
P
B
P
R
VIDEO
L/MONO
AUDIO
R
J3N12721A(E)_P07-17.p65 2/12/05, 6:13 PM8
8
Connecting a DVD player/satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, or TV programs. You can record from the satellite receiver and TV, as well as
record one TV channel while watching another channel.
To satellite
DVD player/ Satellite Receiver
OUT
Satellite IN
S-VIDEO
L
R
AUDIO
TV
IN OUT
ANT (75Ω)
VIDEO
L/MONO
AUDIOS-VIDEO
R
VIDEO 1 VIDEO 2
Y
P
P
VIDEO
B
L/MONO
AUDIO
R
R
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one S-video cable
• one pair of standard audio cables
Note:
You can use a standard video cable instead
of the S-video cable, but the picture quality
will decrease. If you use an S-video cable
between the TV and DVD player/satellite
receiver, make the audio connections and
remove the standard video cable.
Safeguards
Important
Welcome to
Toshiba
Connecting
Connecting
your TV
your TV
To antenna
Connecting a DVD player with ColorStream
Stereo VCR
IN from ANT
CH 3
CH 4
OUT to TV
IN
OUT
VIDEO
LR
AUDIO
®
(component video) and a VCR
This connection allows you to watch DVD, VCR, or TV programs and
record TV programs. You can record from one source while watching a
program from another source. Your TV is capable of using ColorStream
(component video). Connecting your TV to a component video compatible
DVD player, such as a Toshiba DVD player with ColorStream®, can
greatly enhance picture quality and performance.
®
OUT
VIDEO
AUDIO
OUT
IN OUT
Y
B
P
P
R
IN
OUT
LR
VIDEO
AUDIO
TM
COLORSTREAM
YCbCr
VIDEO
L/MONO
AUDIO
R
To antenna
DVD player with ColorStream
L
R
S-VIDEO
TV
ANT (75Ω)
VIDEO
L/MONO
AUDIOS-VIDEO
R
VIDEO 1 VIDEO 2
Stereo VCR
IN from ANT
CH 3
CH 4
OUT to TV
You will need:
• two coaxial cables
• one set of standard A/V cables
• one set of component video cables
• one pair of standard audio cables
Note:
The ColorStream inputs on this TV are for use
with devices that output 480i interlaced
signals ONLY. This TV will not accept or
display 480p or 720p progressive scan
signals or 1080i interlaced high-definition
signals. If you connect a high-definition settop receiver, 480p progressive scan DVD
player, or other similar device to the TV’s
ColorStream inputs, YOU MUST SWITCH
THE DEVICE’S OUTPUT TO 480i INTERLACED MODE FIRST. Failure to do this will
cause a poor picture or no picture to display.
The unauthorized recording, use,
distribution or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
Remote Control
Using the
Setting up
your TV
Using the TV’s
Features
Appendix
J3N12721A(E)_P07-17.p65 2/12/05, 6:13 PM9
9
Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR.
You will also be able to record from one TV channel while watching
another channel.
To antenna
your TV
Connecting
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
Stereo VCR / Playback
IN from ANT
OUT to TV
CH 3
CH 4
TV
ANT (75Ω)
VIDEO
L/MONO
AUDIOS-VIDEO
R
VIDEO 1 VIDEO 2
Stereo VCR/ Recording
IN from ANT
OUT to TV
CH 3
CH 4
IN
OUT
IN OUT
OUT
IN
VIDEO
VIDEO
Y
B
P
P
R
LR
AUDIO
VIDEO
L/MONO
AUDIO
R
LR
AUDIO
Camcorder
You will need:
• two coaxial cables
• two sets of standard A/V cables
Note:
Do not connect the same VCR to the output
and input jacks on the TV at the same time.
For better picture quality, if your VCR has
S-video, you can use an S-video cable
instead of the standard video cable. Do not
connect a standard video cable and an
S-video cable to VIDEO1 simultaneously.
You will need:
• one set of standard A/V cables
AUDIO
VIDEO
L
R
OUT
VIDEO-3 IN
L/MONO
Front Panel of TV
VIDEO
AUDIO
R
PHONES
Connecting an audio amplifier
This connection allows you to use an audio amplifier to enjoy high quality
sound. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier.
Audio Amplifier
AUDIO
LR
IN
OUT
To cable,
cable box
or antenna
TV
ANT (75Ω)
VIDEO
L/MONO
AUDIOS-VIDEO
R
VIDEO 1 VIDEO 2
IN OUT
Y
B
P
PR
VIDEO
L/MONO
AUDIO
R
Note:
For better picture quality, if your camcorder
has S-video, you can connect an S-video
cable (and standard audio cables) to VIDEO1
on the back of the TV. Do not connect a
standard video cable and an S-video cable to
VIDEO1 simultaneously.
You will need:
• one coaxial cable
• one pair of standard audio cables
The unauthorized recording, use,
distribution or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
J3N12721A(E)_P07-17.p65 2/12/05, 6:13 PM10
10
Using the remote control
Preparing the remote control for use
With the remote control, you can operate your TV, most cable TV
converters/satellite receivers, VCRs, and DVD players together, even if
they are different brands. If you will be using your TV with a Toshiba
satellite receiver, VCR, or DVD player, your remote control is already
programmed and ready to use. If you own different brands of cable TV
converters/satellite receivers, VCRs, and/or DVD players, you must
first program your remote control. (See “Programming the remote
control to operate your other devices," on page 12.)
Installing the remote control batteries
To install the batteries:
1. Open the battery cover on the back of the remote control.
2. Install two “AAA” size batteries. Match the + and – signs on the
batteries to the signs on the battery compartment.
3. Close the battery cover on the remote control until the lock snaps.
Note:
The TV remote control may not operate your
VCR, DVD player, or cable TV converter.
Refer to the owner's manual supplied with
your other devices to see which features
may be available. Additionally, the remote
control for this TV may not support certain
features available on the original remote
controls for your other devices, in which case
it is suggested that you use the original
remote control for the applicable device.
Caution:
• Never throw batteries into a fire.
Notes:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated
disposal area.
• Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable
laws and regulations.
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
• When necessary to replace batteries in the
remote control, always replace both
batteries with new ones. Never mix battery
types or use new and used batteries in
combination.
• Always remove batteries from remote
control if they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.
Safeguards
Important
Welcome to
Toshiba
Connecting
your TV
Remote Control
Remote Control
Using the
Using the
Using the remote control to operate your other devices
To control a cable TV
converter/satellite
receiver:
Program the remote
control to recognize the
brand of your cable TV
converter/satellite
receiver (see
“Programming the
remote control to
operate your other
devices” on page 12.)
The buttons shown at
right will control the
cable TV converter/
satellite receiver.
Press “CBL/SAT” first.
(Channel Return)
Power
Input (TV)
Mute (TV)
Channel
Numbers
CH RTN
CAP/TEXT
CBL/SAT
FAV 3/
16:9 (TV)
Channel +/–
Volume +/–
TV/VCR
To control a VCR:
Program the remote
control to recognize
the brand of your VCR
(see “Programming
the remote control to
operate your other
devices” on page 12.)
4
The buttons shown at
right will then control
the VCR.
Press “VCR” first.
11
Input (TV)
Power
Channel
Numbers
CH RTN
(Channel Return)
VCR
16:9 (TV)
Channel +/–
Volume +/–
VCR controls
VCR CH 3/
Setting up
your TV
Using the TV’s
Features
4
Appendix
J3N12721A(E)_P07-17.p65 2/12/05, 6:14 PM11
To control a DVD player:
Program the remote
control to recognize the
brand of your DVD player
(see “Programming the
remote control to operate
your other devices”
below.) The buttons
shown at right will then
control the DVD player.
Press “DVD” first.
Programming the remote control to operate
your other devices
This remote control is pre-programmed to operate most Toshiba satellite
receivers, VCRs, and DVD players. To control a non-Toshiba device
(or a Toshiba device that the remote control is not pre-programmed to
operate)
Using the
Remote Control
1. Refer to the code tables (on pages 13 and 14) to find the
corresponding code for your device.
If more than one code is listed, try each one separately until you
find the one that works.
2. If you are programming the remote control to operate your:
• Cable TV converter/satellite receiver: Press “CBL/SAT.”
• VCR: Press “VCR.”
• DVD player: Press “DVD.”
3. While holding down CODE, press the Channel Number buttons to
enter the three-digit code for your device within 10 seconds.
Note
4. Point the remote control at the cable TV converter/satellite receiver,
VCR or DVD player, and press POWER to test the code.
• If the device responds, you entered the correct code.
• If the device does not respond, repeat steps 1–4 using another
5. Press “TV” to control the TV.
For future reference, write down the codes you used:
Cable TV converter/satellite receiver code ______________________
VCR code _______________________________________________
DVD player code __________________________________________
Power
Input (TV)
Display
Mute (TV)
Number
buttons
DVD
16:9 (TV)
DVD MENU
Volume +/– (TV)
DVD Skip/Search J(/
1/2/3/4
ENTER
DVD controls
)K
Top Menu
DVD Clear
: If you do not enter the code within 10 seconds from step 3, or
if you enter the wrong code, this operation is canceled.
code.
CODE
Channel
Numbers
TV
VCR
DVD
CBL/SAT
Notes:
• When shipped from the factory, the remote
control is set to operate your TV.
• Each time you replace the batteries, you
must reprogram the remote control.
• Some newer VCRs are capable of working
on either of two remote codes. These VCRs
have a switch labeled “VCR1/VCR2.”
If your VCR has this kind of switch and
does not respond to any of the codes for
your VCR, set the switch to the other
position (VCR1 or VCR2) and reprogram
the remote control.
J3N12721A(E)_P07-17.p65 2/12/05, 6:14 PM12
12
Device code tables
[For CBL/SAT Mode]
CABLE Box
Brand Code
ABC
Archer
Cableview
Century
Citizen
Contec
Diamond
Eagle
GE
Gemini
General Instruments
Hamlin
Hitachi
Jasco
Satellite
Brand Code
Alphastar
Chaparral
DISH Network
Drake
Echostar
Express Vu
Fujitsu
GE
General Instruments
Hitachi
Hughes
[For VCR Mode]
VCR
Brand Code
Admiral
Aiko
Aiwa
Akai
Audiovox
Bell & Howell
Broksonic
Calix
Carver
CCE
Citizen
Colortyme
Craig
Curtis Mathes
Daewoo
Daytron
Denon
Dimensia
Electrohome
Emerson
Fisher
061, 062, 063, 082,
084, 087, 091, 092,
096, 098
065, 092, 097, 099
064, 094
092
090, 092, 097
083, 085, 086, 088,
093, 098
093
091
061, 062
069, 070, 094
062, 089, 096
093
062, 095, 096
097
038, 059
034
057
020, 040, 044, 046,
050, 053
018, 041, 051
057
027
008, 009, 013
010, 011, 012, 022,
023, 031, 049
033
033
049
019
018
003, 004, 037, 038,
039, 058, 069
010
007, 068
008, 017
010
026
019
009, 010, 011, 012,
013, 014, 015, 019,
057, 073
005
009, 010, 016, 061,
065, 079
001, 005, 009, 012,
014, 040, 048, 053,
056, 057
011, 013, 015, 017,
018, 019, 057, 078
078
063
001, 048
010, 020, 065
003, 008, 010, 011,
017, 018, 020, 028,
039, 054, 057, 062,
065, 068, 072
007, 016, 021, 022,
023, 057, 064, 068,
070, 071, 079
Brand Code Brand Code
Jerrold
Magnavox
Memorex
Multi Canal
Novavision
Panasonic
Philco
Philips
Pioneer
Proscan
Radio Shack
RCA
Realistic
Recoton
Samsung
062, 069, 071, 082,
086, 089, 091, 096
072, 096
091, 092, 104
090
101
081, 083, 085
087
066, 067, 068, 070,
072, 073, 074, 075,
091, 092
076, 077
061, 062
092, 097, 099
064, 081
065
102
077, 090
Scientific Atlanta
Sears
Signature
Signature 2000
Sprucer
Starcom
Stargate
Sylvania
TeleView
Texscan
Tocom
U. S. Electronics
United Cable
Universal
Wards
063, 078, 079, 080,
088, 098, 101, 105
095
062
096
081, 085
069, 082, 087, 096,
103, 104
069, 090
095, 100
090
100
071, 084, 085
087, 096, 098
082
065, 092, 097, 099,
102, 103
096
Brand Code Brand Code
Hughes Network
Systems
Intersat
Janeil
JVC
Kenwood
Magnavox
Optimus
Pansat
Primestar
Proscan
Radio Shack
RCA
019
048
027
017, 057
029
060
058
036, 052
015, 042
008, 009, 013
022, 023, 030
008, 009, 013, 016
Realistic
Samsung
Sony
Star Choice
Star Trak
STS
Toshiba
Uniden
Zenith
030
059
014, 055
057
025, 026, 037, 054
024
000, 001, 002, 003,
004, 005, 006, 007,
020, 031, 056
021, 028, 030, 032,
035, 039, 043, 045,
047, 058
027
Brand Code Brand Code
Fuji
Funai
Garrard
GE
Go Video
Goldstar
Gradiente
Harman Kardon
Hitachi
JBL
JC Penney
Jensen
JVC
Kenwood
Kodak
LG
Lloyds
Logik
LXI
Magnasonic
Magnavox
004, 041
018, 073
018
001, 002, 009, 040,
042, 048, 056
056, 059, 061, 081
005, 010, 014, 054,
056, 065, 067
018, 065
005
024, 025, 035, 037,
042, 063, 070, 080
076
005, 006, 007, 008,
009, 010, 023, 024,
025, 026, 035, 056,
061, 063, 065
024, 025, 037
005, 006, 007, 014,
037, 043, 062, 063,
068, 082
005, 006, 007, 012,
014, 037, 043, 053,
068, 071
010
010
053, 073, 079
061
010
061, 065, 078
026, 027, 034, 044,
057, 061, 072
Marantz
Memorex
MGA
MGN
Minolta
Mitsubishi
Montgomery Ward
Motorola
MTC
Multitech
NEC
Nikko
Noblex
Optimus
Optonica
Orion
Panasonic
Pentax
Pentex Research
Philco
Philips
Pioneer
005, 006, 007, 012,
014, 026, 053, 067
007, 009, 010, 016,
018, 034, 049, 063,
065, 066, 068, 075,
079
020, 028, 039
056
024, 025, 035, 063
020, 024, 025, 028,
039, 043, 065
049
049
009, 046, 061
009, 012, 018
005, 006, 007, 012,
014, 037, 043, 053,
054, 067, 070
010
009
010, 049, 065
031
054, 057, 062, 065,
068, 072
036, 045, 046, 057,
061, 072, 079
012, 024, 025, 035,
042, 053, 063
014
026, 027, 063
026, 031, 044, 057
006, 024, 043, 055
Safeguards
Important
Welcome to
Toshiba
Connecting
your TV
Remote Control
Remote Control
Using the
Using the
Setting up
your TV
Using the TV’s
Features
Appendix
J3N12721A(E)_P07-17.p65 2/12/05, 6:14 PM13
13
VCR (Continued)
Brand Code
Portland
Proscan
Proton
Quasar
Radio Shack
Radio Shack/
Realistic
Radix
RCA
Realistic
Ricoh
Runco
Samsung
Sansui
012, 013, 015
001, 002, 048
061
045
010, 031, 065
007, 009, 010, 016,
018, 020, 021, 022,
031, 049
010
001, 002, 003, 009,
024, 025, 029, 035,
040, 042, 045, 048,
055, 056, 063, 071,
083
007, 009, 010, 011,
016, 018, 020, 021,
022, 031, 049, 051,
056, 060, 065, 075,
079
047
034
009, 011, 038, 056,
073, 084
006, 037, 043, 061
TV/VCR Combo
Brand
Action
GE
Goldstar
Panasonic
078
059, 062
065
065
Brand Code Brand Code
Sanyo
Scott
Sears
Sharp
Shintom
Signature
Signature 2000
Singer
Sony
STS
Sylvania
Symphonic
Tandy
007, 009, 016, 054,
064, 068, 071, 075,
079, 085
008, 011, 017, 028,
030, 057, 065, 072
007, 010, 016, 021,
022, 023, 024, 025,
035, 053, 057, 063,
064, 065, 068, 071,
075, 079
013, 020, 031, 049,
051, 060, 066
004, 025, 032, 061
049
075
047, 061
004, 032, 033, 041,
052, 058, 070, 074,
076, 077, 080
035
018, 026, 027, 028,
044, 072
018, 051, 053, 073,
079
007
Tashiko
Tatung
Teac
Technics
Teknika
Toshiba
Totevision
Unitec
Unitech
Vector Research
Video Concepts
Wards
White Westinghouse
XR-1000
Yamaha
Zenith
010
037
018, 029, 037
036
010, 018, 065
000, 011, 021, 023,
024, 028, 030, 039,
057, 074, 078, 079
009, 010, 065
073
009
005, 006, 011, 012,
053
005, 006, 011, 012,
039, 053
009, 010, 011, 016,
018, 020, 024, 025,
031, 035, 049, 051,
056, 057, 060, 065,
066, 079
073
018
005, 006, 007, 014,
037, 053
004, 032, 034, 041,
047, 069, 086
Brand CodeCode Brand Code
Precision
Quasar
Realistic
Sony
078
065
079
074
Toshiba
Zenith
Totevision
057
065
009, 010, 065
[For DVD Mode]
DVD
Using the
Remote Control
Brand Code
Aiwa
Apex
BOSE
Broksonic
Clarion
Classic
Daewoo
Denon
Emerson
Fisher
Funai
GE
Go Video
GPX
Hitachi
JVC
Portable DVD
Brand Code
Aiwa
Audiovox
HTIB
Brand Code
Lasonic 083 084Panasonic Venturer 085
006, 015
016, 017
097
018
019
020
021
022, 023, 024, 025
026, 027
028
027
001, 029, 030
087
031
005, 032, 033, 034,
035
003, 007, 036, 042,
088
093
094, 095
Brand Code Brand Code
Kenwood
Konka
Magnavox
Memorex
Mintek
NAD
Nakamichi
Norcent
Onkyo
Oritron
Panasonic
Philips
Pioneer
Proscan
Qwestar
RCA
037
008, 009
004, 038
039
040
026
041
043
044
058
010, 045, 046, 047,
048, 049, 050
004, 051
052, 053, 054, 055
001, 056
057, 058
001, 002, 059, 089
Sampo
Samsung
Sansui
Sanyo
Sharp
Sherwood
Sony
Sylvania
Teac
Technics
Techwood
Toshiba
Yamaha
Zenith
060
061, 062, 086, 090
073
063, 091
064, 067
074
011, 012, 065, 066,
068, 069, 070
027
071
072
075
000, 013, 076, 077,
078
079, 080, 081
014, 082, 092
Brand Code Brand Code
024,096,099Panasonic RCA 098
Brand Code Brand Code
[For VCR and DVD Mode]
DVD/VCR Combo
Brand VCR Code
Go Video
JVC
RCA
J3N12721A(E)_P07-17.p65 2/12/05, 6:14 PM14
081
082
083
DVD Code
087
088
089
Brand VCR Code DVD Code
Samsung
Sanyo
Zenith
084
085
086
090
091
092
14
Learning about the remote control
POWER turns the TV on and off
SLEEP programs the TV to turn off at a set time (page 26)
TV/VIDEO selects the video input source (page 25)
CH +/– cycles through programmed channels (page 17)
TV selects TV mode
CBL/SAT selects CBL/SAT mode (page 11)
VCR selects VCR mode (page 11)
DVD selects DVD mode (page 12)
CHANNEL NUMBERS allow direct access to channels
(page 17)
VOL +/– adjusts the volume level
CH RTN (Channel Return) cycles through the channels you
programmed as favorite channels (page 18)
TV/Video
Display
Channel
Numbers
CAP/TEXT 1/2
TV
CBL/SAT
POWER
Mute
CH RTN
(Channel Return)
Fav 3/
4
(
Favorite Channels
VCR
DVD
Safeguards
Toshiba
)
your TV
Important
Welcome to
Connecting
MENU/ENTER accesses the menu system; also sets menu
selections (page 16)
FAV 3/
you programmed as favorite channels (page 18)
4
(Favorite Channels) cycles through the channels
MUTE turns off the sound (page 27)
DISPLAY displays status information on-screen (page 25)
CODE is used to program the remote control (page 12)
EXIT closes on-screen menus (page 16)
16:9 toggles the aspect ratio between 4:3 (letterbox) and 16:9
(wide screen) modes (page 26)
RESET returns settings to preset factory formats (pages 25
and 27)
CAP/TEXT turns closed captions or text on and off (page 26)
1/2 selects closed caption/text channel 1 or 2 (page 26)
MTS switches smong STEREO, SAP, and MONO sound
(page 27)
STOP stops a videotape/DVD
REC starts recording a videotape
PLAY plays a videotape/DVD
FF fast forwards a videotape/DVD
REW rewinds a videotape/DVD
PAUSE pauses a videotape/DVD
TV/VCR toggles between TV and VCR modes when viewing
while recording
DVD SKIP/SEARCH J( )K skips DVD chapter
DVD CLEAR clears input data in DVD mode
TOP MENU access the DVD TOP menu
DVD MENU access the DVD menu
VCR CHANNEL 3
channels
and
4
cycle through programmed VCR
Sleep
Volume +/–
Menu/Enter
DVD menu
Enter
Pause
Skip/Search J(/
Rew
TOP menu
Rec
Reset
MTS
16:9
Channel +/–
Exit
Play
)K
Stop
FF
TV/VCR
Clear
VCR CH 3/
4
Remote Control
Remote Control
Using the
Using the
Setting up
your TV
Using the TV’s
Features
Appendix
J3N12721A(E)_P07-17.p65 2/12/05, 6:15 PM15
15
Setting up your TV
After you have installed the batteries and programmed the remote
control, you need to set some preferences on the TV using the menu
system. You can access the menu system with the buttons on the
remote control.
• When you make a menu selection, your changes occur immediately.
You do not have to press MENU or EXIT to save your changes.
• After 15 seconds, the menu screen will automatically close if you do
not make a selection. Your changes will still be saved.
• When you are finished programming the menus, press EXIT.
Changing the on-screen display language
You can choose from three different languages (English, French, and
Spanish) for the on-screen display of adjustment menus and messages.
To select a language:
1. Press MENU, then press
or until the OPTION menu appears.
your TV
Setting up
PICTURE AUDIO SETUPCHOPTION
LANGUAGE
CH LABEL START
FAVORITE CH
LOCK
ON/OFF TIMER
COLORSTREAM
SELECT ADJUST
ENGLISH
START
START
OFF
DVD
2. Press ▲ or ▼ to highlight LANGUAGE.
PICTURE AUDIO SETUPCHOPTION
LANGUAGE
CH LABEL START
FAVORITE CH
LOCK
ON/OFF TIMER
COLORSTREAM
SELECT ADJUST
3. Press
ENGLISH FRANCAIS
ESPANOL
START
START
OFF
DVD
or to highlight your desired language.
Menu
Exit
J3N12721A(E)_P07-17.p65 2/12/05, 6:15 PM16
16
Adding channels to the TV’s memory
When you press CH +/- on the remote control or CHANNEL ▼/▲ on
the TV front panel, your TV will stop only on the channels stored in the
TV’s channel memory. Follow the steps below to program channels into
the memory.
Safeguards
Important
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory automatically, you can add or erase specific channels manually.
To add channels automatically:
1. Press MENU, then press or to display the SETUP menu.
2. Press ▲ or ▼ until the TV/CABLE
selection is highlighted.
3. Press
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
or to highlight either
PICTURE AUDIO SETUP OPTION
TV / CABLE TV CABLE
CH PROGRAM
ADD / ERASE
SELECT ADJUST
4. Press ▼ to select CH PROGRAM.
5. Press
or to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
“PROGRAMMING NOW-PLEASE WAIT” appears.
6. When channel programming is complete, the message “COMPLETED”
appears.
7. Press CH + or – to view the programmed channels.
CH
START
ADD
Welcome to
Toshiba
Channel
Numbers
Connecting
your TV
Channel +/–
Menu
Remote Control
Using the
Adding and erasing channels manually
After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If you are adding a channel, you must select the channel using the
Channel Number buttons.
2. Press MENU, then press
to display the SETUP menu.
3. Press ▲ or ▼ to highlight ADD/
ERASE.
4. Press
or to select ADD or
or
PICTURE AUDIO SETUP OPTION
CH
TV / CABLE CABLE
CH PROGRAM START
ADD / ERASE ADD ERASE
ERASE, whichever function you
want to perform.
5. Repeat steps 1–4 for other
SELECT ADJUST
channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press CHANNEL ▼/▲ on the TV front panel or CH +/– on the
remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
Setting up
Setting up
your TV
your TV
Using the TV’s
Features
Appendix
J3N12721A(E)_P07-17.p65 2/12/05, 6:15 PM17
17
Using the TV’s features
Adjusting the channel settings
Switching between two channels
You can switch between two channels without entering an actual
channel number each time.
To switch between two channels:
1. Select the first channel you want to view.
2. Select a second channel using the Channel Number buttons (0–9,
100).
3. Press CH RTN. The previous channel will be displayed.
Each time you press CH RTN, the TV will switch back and forth
between the last channels you tuned.
Programming your favorite channels
You can preset up to 12 of your favorite channels using the Favorite
Channel Programming feature. Because this feature scans through
only your favorite channels, it allows you to skip other channels you
do not normally watch.
You can still use Channel + / – to scan through all the channels you
programmed in the TV’s memory.
To program your favorite channels:
1. Select a channel you want to program as a favorite channel.
2. Press MENU, then press
3. Press ▲ or ▼ to highlight FAVORITE CH.
PICTURE AUDIO SETUPCHOPTION
CH LABEL START
FAVORITE CH
LOCK
ON/OFF TIMER
COLORSTREAM
SELECT START
ENGLISHLANGUAGE
START
START
OFF
DVD
or to display the OPTION menu.
Channel
Numbers
CH RTN
Channel
Numbers
Features
Using the TV’s
4. Press
or to display the FAVORITE CH menu. SET/CLEAR will
be highlighted.
PICTURE AUDIO SETUPCHOPTION
FAVORITE CH : CH 012
SET/CLEAR SET CLEAR
SET UP CH
TV CABLE
SELECT
END EXIT
5. Press
or to highlight SET and press ENTER.
0000
0000
0000
SET ENTER
6. Press EXIT to close the screen.
7. Repeat steps 1–6 for up to 12 channels.
To select your favorite channels:
Press the FAV ▲ ▼ buttons on the remote control to select your
favorite channels.
The FAV ▲ ▼ buttons will not work until you have programmed
your favorite channels.
FAV /
Menu/
Enter
Exit
18
J3N12721A(E)_P18-27.p65 2/12/05, 6:15 PM18
To clear your favorite channels:
1. Select a channel you want to clear.
2. Press MENU, then press or to display the OPTION menu.
3. Press ▲ or ▼ to highlight FAVORITE CH.
4. Press
or to display the FAVORITE CH menu. SET/CLEAR will
be highlighted.
Channel
Numbers
Safeguards
Important
PICTURE AUDIO SETUPCHOPTION
FAVORITE CH : CH 012
SET/CLEAR SET CLEAR
SET UP CH
TV CABLE
SELECT
END EXIT
5. Press
or to highlight CLEAR.
PICTURE AUDIO SETUPCHOPTION
FAVORITE CH : CH 012
SET/CLEAR SET CLEAR
SET UP CH
TV CABLE
SELECT
END EXIT
736 4 1
12 125 63 40
13 28 97 112
SET ENTER
736 4 1
12 125 63 40
13 28 97 112
CLEAR ENTER
6. Press ENTER until “0” replaces the channel number you want to
erase.
7. Press EXIT to clear the screen.
8. Repeat steps 1–6 for the other channels.
Using the LOCK menu
The LOCK menu includes the CH LOCK, VIDEO LOCK, GAMETIMER,
and NEW PIN CODE functions.
Menu/
Enter
Exit
Welcome to
Toshiba
Connecting
your TV
Remote Control
Using the
Selecting a PIN code
You can use these functions after entering the correct PIN code.
To select your PIN code and access the LOCK menus:
1. Press MENU, then press
2. Press ▲ or ▼ to highlight LOCK.
PICTURE AUDIO SETUPCHOPTION
CH LABEL START
FAVORITE CH
LOCK
ON/OFF TIMER
COLORSTREAM
SELECT START
ENGLISHLANGUAGE
START
START
OFF
DVD
3.Press or to display the BLOCKING menu.
PICTURE AUDIO SETUPCHOPTION
LOCK
BLOCKING RESET
PIN CODE
SELECT
END EXIT
SET ENTER
[0-9]
or to highlight the OPTION menu.
Menu
Setting up
your TV
Using the TV’s
Using the TV’s
Features
Features
Appendix
J3N12721A(E)_P18-27.p65 2/12/05, 6:16 PM19
19
4. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the LOCK menus for the first time, select a
four-digit number to be your PIN code. Press ENTER. The
BLOCKING menu appears.
PICTURE AUDIO SETUPCHOPTION
LOCK
CH LOCK START
VIDEO LOCK
GAME TIMER
NEW PIN CODE
SELECT ADJUST
OFF
OFF
START
5. You may now enable blocking. See “Locking channels” (below),
“To change your PIN code” (below), or “Locking video input”
(page 21), or “Setting the GameTimer™” (page 21).
To change your PIN code:
1. Press MENU, then press
or to display the OPTION menu.
2. Press ▲ or ▼ to highlight LOCK.
3. Press
or to display the BLOCKING menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code.
Press ENTER. The BLOCKING menu appears.
5. Press ▲ or ▼ to highlight NEW PIN CODE and press
or to
display the NEW PIN CODE menu.
6. Use the Channel Number buttons (0–9) to enter a new code.
Press ENTER.
7. Press EXIT to return to normal viewing.
Note:
If you forget your PIN code, press DISPLAY
four times within five seconds from the
BLOCKING menu. This resets your PIN code
and allows you to proceed to the BLOCKING
menu.
Display
Channel
Numbers
Menu/
Enter
Exit
Features
Using the TV’s
Locking channels
With the CH LOCK feature, you can lock specific channels. You will not
be able to tune locked channels unless you clear the setting. You can
choose to lock up to nine TV channels and nine cable channels.
To lock channels:
1. Use the Channel Number buttons (0–9, 100) to display the
television channel you wish to lock.
2. Press MENU, then press
3. Press ▲ or ▼ to highlight LOCK.
4. Press or to display the LOCK menu.
5. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
6. Press ▲ or ▼ to highlight CH LOCK and press
the CH LOCK menu.
7. Press
or to select the following:
• SET– to set the channel as one to be
locked. Then press ENTER.
• CLEAR– to clear all channels from
the list of locked channels.
Then press ENTER.
8. Repeat steps 1 through 7 to lock other
channels. When you are finished
locking channels, press EXIT to return
to normal viewing.
If you try to tune a locked channel, the
TV will not display it, but will display the
nearest unlocked channel.
or to display the OPTION menu.
or to display
PICTURE AUDIO SETUPCHOPTION
LOCK
CH LOCK START
VIDEO LOCK
GAME TIMER
NEW PIN CODE
SELECT ADJUST
PICTURE AUDIO SETUPCHOPTION
CH LOCK : CH 12
SET/CLEAR SET CLEAR
LOCKED CH
TV CABLE
SELECT
END EXIT
OFF
OFF
START
000
000
000
SET ENTER
Channel
Numbers
Menu/
Enter
Exit
Note:
After programming CH LOCK, change
channels before turning off the television.
J3N12721A(E)_P18-27.p65 2/12/05, 6:16 PM20
20
Loading...