Toro 137-5001 Installation Instructions
CEBaggerComplianceKit
TimeCutter
ModelNo.137-5001
®
HDRidingMower
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
FormNo.3415-409RevA
InstallationInstructions
ProcedureDescription
1
2
ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia
1
RemovingtheExisting
CurtainandKnob
Qty.
Nopartsrequired
Curtain
Bolt(1/4x5/8inch)
–
1
1
WARNING
CALIFORNIA
Proposition65Warning
tocausecancer,birthdefects,orreproductiveharm.
Use
Removetheexistingcurtainandknob.
Installthenewcurtain.
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface,shutoffthe
engine,engagetheparkingbrake,andremove
thekey .
2.Removetheexistingcurtainbylooseningthe
boltsholdingthecurtaintotheframeandthe
mowerdeck(Figure1).
©2017—TheT oro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
g213267
Figure1
1.Bolts
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
2.Curtain
*3415-409*A
3.RemovetheknobshowninFigure2.
Figure2
1.Knob3.Beltcover
2.Poweredbaggercover
2
g201515
g213343
Figure3
1.Existingcurtainhardware3.Newcurtain
2.Bolt(1/4x5/8inch)
InstallingtheNewCurtain
Partsneededforthisprocedure:
1
Curtain
1
Bolt(1/4x5/8inch)
Procedure
1.Removetheboltsandretainingnutsfromthe
straightrodintheexistingcurtainandretainthe
nutsandbolts.
2.Removethestraightrodfromtheexisting
curtain.
3.Installthestraightrodintothenewcurtain
andinstallthepreviouslyremovedboltsand
retainingnuts.
4.Installthenewcurtaintotheframeandthe
mowerdeckusingtheexistinghardware(Figure
3).
5.Installthebolt(1/4x5/8inch)intothehole
wheretheknobwasremoved(Figure3).
2
Loading...