ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia
Installation
PreparingtheMachine
HDShockandSpringKit
TimeCutter
ModelNo.137-2042
tocausecancer,birthdefects,orreproductiveharm.
®
HDRidingMower
Proposition65Warning
WARNING
CALIFORNIA
FormNo.3414-890RevA
InstallationInstructions
1.Parkthemachineonalevelsurface.
2.Disengagetheblade-controlswitch.
3.Engagetheparkingbrake.
4.Movethemotion-controlleversoutwardtothe
NEUTRAL-LOCKposition.
5.Shutofftheengineandremovethekey.
RemovingtheExistingRear
Springs
1.Removethecamlocknut(1/2inch)securingthe
topoftheexistingrearspring(Figure1).
Retainthecamlocknut(1/2inch).
2.Removetheangenut(3/8inch)securingthe
bottomoftheexistingrearspring(Figure1).
Retaintheangenut(3/8inch).
3.Removetheexistingrearspring(Figure1).
4.Repeatthisprocedureontheotherside.
Figure1
1.Camlocknut(1/2inch)3.Cam-lockleverinthe
2.Rearspring
lockedposition
4.Flangenut(3/8inch)
InstallingtheNewRear
g209520
©2017—TheT oro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
Heavy-DutySprings
1.Installthenewrearspringusingthepreviously
removedcamlocknut(1/2inch)andangenut
(3/8inch)asshowninFigure1.
2.Withthecam-lockleverinthelockedposition,
torquethecamlocknut(1/2inch)to15to16
N∙m(135to145in-lb).
3.Repeatthisprocedureontheotherside.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3414-890*A
RemovingtheExisting
FrontSpring
1.Removethe2wheelboltsand2angenuts(3/8
inch)securingtheexistingfrontspring(Figure
2).
Retainthe2wheelboltsand2angenuts(3/8
inch).
2.Removetheexistingfrontspring(Figure2).
Figure2
Topofthefrontspringshown
g209519
1.Frontspring3.Wheelbolt
2.Flangenut(3/8inch)
InstallingtheNewFront
Heavy-DutySpring
Installthenewfrontspringusingthepreviously
removed2wheelboltsand2angenuts(3/8inch)as
showninFigure2.
2