Toro 133-1439 Installation Instructions

Height-of-CutBlocks

GrandStand

ModelNo.133-1439

Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Mower

Proposition65Warning

WARNING

CALIFORNIA

FormNo.3403-325RevA

InstallationInstructions

Installation

PreparingtheMachine

1.Parkthemachineonalevelsurface,disengagethePTO, movethemotion-controlleverstotheNEUTRAL-LOCK position,andsettheparkingbrake.

2.Shutofftheengine,removethekey,andwaitforall movingpartstostopbeforeleavingtheoperating position.

3.Movetheheight-of-cutlevertotheTRANSPORT position.

4.Movetheheight-of-cutpintothe7cm(2-3/4inch)or lowerposition

CorrectingtheHeightofCut

1.Placetheheight-of-cutblocksbelowthemowerdeck sothatthedeckshellrestsontheblockswhenyou lowerthedeck(Figure1).

Note:Ensurethattheblocksarenotdirectlybelow thebafesonthefrontofthedeckortheblades.

Figure1

1.Height-of-cutblock(belowthedeck)

Registeratwww.T oro.com.

2.Lowerthedeckontotheblocks.

3.Verifythatonlythedeckshellisrestingontheblocks.

Note:Ensurethattheweightofthedeckrestsonthe blocksandthereisnotensiononthelinkages.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3403-325*A

4.Lightlypullbacktheheight-of-cutleverwith1nger andnotethepositionoftheleverrelativetothetangent oftheholeforthe7.6cm(3inch)heightofcut(Figure

2).

Figure2

1.Tangentfor7.6cm(3inch)heightofcut

8.Loosenthejamnutsandsideboltsintheyokesforthe deckchainsandlinkages(Figure4).

5.Loosenthe2jamnutsontheheight-of-cutlinkage (Figure3).

Figure3

1.Jamnut

2.Height-of-cutlinkage

6.Adjustthelinkageuntiltheleveristangenttothe7.6 cm(3inch)holewhenyoupullbacktheleverwith1 nger(Figure2).

7.Tightenthe2jamnuts.

Figure4

1.Topbolt

2.Jamnut

3.Yoke6.Linkages

4.Sidenut

5.Chains

9.Rotatethetopboltoftheyokesclockwiseuntilthereis noslackinthechainsandlinkages(Figure4).

Note:Donotoveradjustthebolts.Overadjustingmay preventyoufromraisingthedecktotheTRANSPORT position.

10.Tightenthejamnutsandsidebolts(Figure4).

11.VerifythatyoucanraisethedecktotheTRANSPORT position.

12.Removetheblocks.