Toro 132-3156 Parts Catalogue
Form No. 1453-092
Arctic Cat® Prowler
Installation Instructions - Accessory Kit
Under Hood Storage Box Kit
(p/n 2436-246)
NOTE: Read these installation instructions thoroughly before beginning. Retain these Installation
Instructions for future reference.
Kit includes:
p/n QTY DESCRIPTION
0417-014 6 Trim
0423-545 4 Shoulder Self-Tapping Screw
4506-037 1 Storage Box
8424-602 2 M6 Flange Nut
8476-616 2 M6 Machine Screw
1453-092 1 Instructions
1. Open the hood and remove the nine screws
securing the dash to the frame; then remove the
shift knob and pull the dash away from the
frame. See Fig. 1.
Fig. 1
Fig. 2
ROV-516A
3. Position Storage Box with the four mounting
locations from step 2 and the front two mounting locations on the frame.
4. Install the six Trim pieces onto the rear raised
location on the storage box where the dash will
contact the box; then secure the box to the frame
using four Shoulder Self-Tapping Screws, two
M6 Machine Screws, and two M6 Flange Nuts.
Do not over-tighten. See Fig. 3.
Fig. 3
ROV-517A
5. Position the dash and secure using the existing
ROV-514A
2. Remove the four screws securing the two hood
screws. Do not over-tighten. Close and latch the
hood.
support brackets to the frame; then remove the
brackets. See Fig. 2.
Printed in the U.S.A. ®™Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701 1214
Loading...