Toro 132-3152 Parts Catalogue

Form No. 0453-692

Arctic Cat® Prowler

Installation Instructions - Accessory Kit

Low Windshield Kit

(p/n 1436-876 & 1436-514)

 NOTE: Read these installation instructions thoroughly before beginning the installation process. Retain these Installation Instructions for future reference.

Kit includes: Ref. No. p/n QTY DESCRIPTION

1 N/A 1 Low Windshield 2 2441-224 4 Clamp 3 * 4 Machine Screw 4 * 4 Flat Washer 5 * 4 Nut

0453-692 1 Instructions

* Included in Hardware Kit (p/n 1436-573)

1. Place two Clamps (2) on the forward-most section

of the ROPS (two per side) making sure the flat side of the clamp is facing toward the front of the vehicle. See Fig. 1.

Fig. 1

2. With the clamps properly positioned, secure Low Windshield (1) to the clamps with four Machine Screws (3), four Flat Washers (4), and Nuts (5). Tighten until snug only.

CAUTION

Do not over-tighten the nuts. Damage to the windshield may occur.

UTV-096A

Printed in the U.S.A. ®™Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701 1013