Toro 132-3148 Parts Catalogue

Form No. 0453-845

Arctic Cat® Prowler

Installation Instructions - Accessory Kit

VXC Glass Windshield Kit

(p/n 1436-648)

 NOTE: Read these Installation Instructions thoroughly before beginning the installation process. Retain
these Installation Instructions for future reference.

Kit includes:
Ref. No. p/n QTY DESCRIPTION

1 2441-308 1 Windshield
2 2441-224 8 Rubber Clamp
3 * 8 Machine Screw
4 * 8 Flat Washer
5 * 8 Nut
6 * 1 Adhesive Foam

0453-845 1 Instructions

* Included in Hardware Kit (p/n 1436-573)

Tools Needed: T30 Torx and a 10 mm socket.

1. Thoroughly clean the installation area on the vehi­cle.

2. Apply Adhesive Foam (6) along the inside perime­ter of the Windshield (1); then align windshield
with the hood and front ROPS tubes. See Fig. 1.

Fig. 1

ROV-186A

3. Place eight Rubber Clamps (2) on the forward­most section of the ROPS making sure the flat side
of the clamp is facing toward the front of the vehi­cle.

4. Secure the windshield to the ROPS using eight
Machine Screws (3), eight Flat Washers (4), and
eight Nuts (5).

CAUTION

Do not over-tighten the nuts. Damage to the wind­shield may occur.

Printed in the U.S.A. ®™Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701 0914