Torbal RXP-4 User Manual

I n s t r u c t i o n M a n u a l

100 Delawanna Ave.,Suite 120

Torbal Printers

RXP-4 Thermal Printer

Fulcrum Inc.

23 Carol Street.

Clifton, NJ 07014

[phone]

[phone]

http://www.fulcruminc.net

SpecificationsSpecifications

DIP Switch SettingsDIP Switch Settings

Model: RXP-4

Printing:

- Speed - 0.8 lines per second

- Characters - 40 characters per line

Transmission parameters:

- Speed - 9600 baud

- Format - 8 bits without parity

Paper:

- Type - Thermal Paper

- Size - 4.3” W

Dimensions:

- Size - 6.5 W x 5.5D x 2.0H inches
(165 x 140 x 50 mm)

- Weight - 1.0 pounds (0.45 Kg)

Operating conditions:

- Temperature - 41F to 95F (5C to
35C)

- Humidity 10 to 80%

Interface:

- RC232C DIN 6

Power supply:

- 120VAC, 60Hz 50W

Cautionary notes and precautionsCautionary notes and precautions

WARNING:

- Shut OFF the equipment immediately if it produces smoke, a
strange odor or unusual noise. Immediately unplug the
equipment and contact technical support.

- Never attempt to repair, disassemble or modify this product
yourself. Tampering with this product may result in injury and
cause more damage to the equipment.

- Be sure to use the specified power source.

!

- Do not allow foreign matter to fall into the equipment.

- If water or other liquid spills into this equipment, do not
continue to use it. Unplug the power cord immediately and
contact technical support.

The printer's settings are pre­configured for all TORBAL scales
and should always remain as shown
below.

SW1 SW1 SW1 SW1 SW1 SW1 SW1 SW1

OFF ONOFF ON ON OFF OFF OFF

CAUTION:

- Do not connect cables in ways other than those mentioned in
this manual.

- Be sure to set this equipment on a firm, stable, horizontal
surface. Product may break or cause injury if it falls.

- Do not use in locations subject to high humidity or dust levels.

- Do not place heavy objects on top of this product.

!

1

- Never stand on or lean on this product. Equipment may fall or
collapse, causing breakage and possible injury.

- To ensure safety, unplug this product before leaving it unused
for an extended period.

- Before moving the product, unplug it and unplug all cables
connected to it.

http://www.fulcruminc.net

Fulcrum Inc.

23 Carol Street.

Clifton, NJ 07014

[phone]

[phone]

6