Topcon SGR-1 Quick Setup Manual

SGR-1 Antenna Software Setup

Select the GPS Correction

Select to access the GPS Settings screen. 1.

Select to access GPS Correction selection. 2.

GX-45 Console

SGR-1 Quick Setup Guide

Part Number AGA4117 Rev. 1.1

Use the up and down arrows to select the correction system. 3.

Select to confirm your selection. 4.

Refer to the AGA3663 System 110/150 Operator’s manual
for more information on setting up the different correction
systems.

This quick setup guide is to be used in

conjunction with the System 110/150

Operator’s Manual P/N AGA3663

GX-45 Console SGR-1 Quick Setup Guide AGA4117 Rev 1.1

SGR-1 Antenna Software SetupSGR-1 Installation Procedure

SGR-1 to GX-45 Installation Procedure Select the GPS Receiver

Select to access GPS Settings. 1.

Mount the SGR-1 antenna along the center line on the roof 1.
of your tractor.

The SGR-1 antenna has 3 magnets on its base to secure its
position. A metal mounting plate is supplied to secure the
antenna to cabin tops that are non-magnetic.

Select to access GPS Receiver selection.2.

Connect the AGH1368 harness to the SGR-1 antenna. 2.

Route the AGH1368 harness into the cabin through the rear 3.
window of your tractor.

Connect the AGH1368 harness to your GX-45 console.4.

Select SGR-1 using the up and down arrows. 3.

Select to confirm your selection and the system will 4.
restart.

www.topconpa.com www.topconpa.com