©Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Telephone: Nationwide: Fax: E-mail: Internet:
08/07
EMCEE PA-20U DTV Low Noise Preamplifier
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
969 Horsham Road
Horsham, Pennsylvania 19044 USA
PA-20U DTV Low Noise Preamplifier
Specifications
Input Frequency: 470-800 MHz
Noise Figure: .5 dB Typical, 1.0dB
Max
Gain: 20 dB
Gain Flatness: ±.5 dB per Channel
±1.5 dB per Band
IP3: +35 dBm
P1dB: 20dBm
Input Impedance: 50Ω or 75Ω
Output Impedance: 50Ω or 75Ω
Input VSWR: 1.5:1 Typical
Output VSWR: 1.5:1 Typical
Input Connector: 50 Ω, Type ‘N’ Female/75 Ohm, Type ‘F’ Female
Output Connector: 50 Ω, Type ‘N’ Female/75 Ohm, Type ‘F’ Female
DC Supply Voltage: +16 to 24 VDC
Current: <100ma Typical
Power Supply Connector Type: ‘F’ Female, w/Output Power Diplex
Temperature Limits:
Operating: -40°C to +50°C
Storage: -50°C to +85°C
Leak Testing Per: CWT DT-2005.1
Finish: White Polyester Powder Coat Paint
Physical Dimensions:
Size: H: 10.0” W: 4.75” D: 2.0”
Weight: 2.2 lbs.
Mast Size: 1”-2.5” O. D.
Accessories Included: Mounting Bracket, Bias T, 24VDC Power Supply
NOW Broadcast and CATV engineers have a comprehensive
choice in professional quality DTV pre-amplifiers. Superior power
handling and ultra low noise design allow for amplification of weak
off-air signals mixed with strong local carriers without the use of an
expensive pre-selector filter. The PA-20U provides extreme power
handling for multi-carrier mixed signal environments.
Ordering Information
Part Number PA-20U-50 20 dB gain, 50Ω
PA-20U-75 20 dB gain, 75Ω