Page 1
MPCM45 SAW Filtered Single Channel A/V Mini-Modulator
• 45dBmV minimum output for a 66dB in-band carrier to noise ratio provides
superior picture quality
• 125 Channel Frequency Range 54~806MHz (CATV 2~13, A1~A5, A~ZZZ,
89~125, UHF 14~69)
• SAW (surface acoustic wave) filtered for superior adjacent channel performance enables drop-in channel expansion
• BTSC stereo compatible pre-emphasis disable switch provides pass-through
for stereo signals
• Front panel access controls enables easy setup
• Single-slot design allows up to 12 or 16 units in Pico Macom’s MPC-12,
MPC-12R and MPC-16PS/CS chassis
• IRC and HRC offsets available for frequency settings in systems using offset
channels
• Compatible with most manufacturers’ mini-modulator chassis
• Optional PAL format channels available
• Nickel plated precision brass threads
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 [email protected]
Mini-Modulators, Mini-Demodulators & Chassis
MPCMA SAW Filtered A/V Mini-Modulator
• 45dBmV minimum output for a 63dB in-band carrier to noise ratio provides
superior picture quality
• 135 Channel Frequency Range 54~860MHz (CATV 2~13, A1~A5, A~ZZZ,
89~135, UHF 14~69)
• Agile microprocessor control enables quick digital push-button channel
selection for ease of installation, configuration and improved system uptime
• SAW (surface acoustic wave) filtered for superior adjacent channel performance enables drop-in channel expansion
• BTSC stereo compatible pre-emphasis disable switch provides pass-through
for stereo signals
• Three-digit LED display provides quick channel identification
• Non-volatile memory ensures channel programming remains after power
loss
• IRC and HRC offsets available for frequency settings in systems using offset
channels
• Compatible with most manufacturers’ mini-modulator chassis
• PAL option available for international operation
MPCM45
MPCMA
MPCD Agile A/V Mini-Demodulator
• 125 Channel Frequency Range 54~806MHz (CATV 2~13, A1~A5,
A~ZZZ, 89~125, UHF 14~69)
• Agile microprocessor control with push-button channel selection pro-
vides ease of installation, configuration and servicing
• SAW filtered for precise adjacent channel rejection
• >60dB signal to noise ratio for crisp, sharp picture
• Digital display provides quick channel identification
• Non-volatile memory ensures channel programming remains after power
loss
• Single-slot design allows up to 12 or 16 units in Pico Macom’s MPC-12,
MPC-12R and MPC-16PS/CS chassis
• Fully compatible with most other manufacturers’ “mini-mod” chassis
MPCMD
Page 2
Specifications Subject To Change Without Notice Rev 01-12 ©Toner Cable Equipment, Inc.
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 [email protected]
MPC-12 / MPC-12C 12-Slot Universal Mini-Mod Chassis & Power Supply
MPC-PSF12/16 Universal Power Supply Module
• High capacity fully regulated power supply provides the most
efficient performance, ensuring reliability over a wide range
of environmental conditions
• High efficiency power supply (over 70%) equipped with
cooling fan minimizes power consumption and heat
dissipation
• Current overload protection prevents damage to system and
prolongs power supply life
• Internal fusing circuitry provides current overload protection
and precise voltage regulation, preventing component
damage
MPC-BP Universal Chassis Blank Plate
• Blocks escape of cool air when used with forced air ventilation systems
• Provides uniform look when not all module slots are filled
• Slides easily into Pico Macom mini-chassis systems and
those of other manufacturers
Module Capacity 12
Input Voltage Range 90-240 VAC
Input Voltage Frequency 47 - 63 Hz
Power Required 68 Watts Each
Output Volt. (V1) @ 4A 5 VDC
Output Volt. (V2) @ 4A 12 VDC
Efficiency 70%
Line Load Regulation ±1%
Minimum Load 10%
Video Input Connector 75 F-Female
Audio Input Connector 5K F-Female Unbalanced
RF Output Connector 75 F-Female
UR Listed Power Supply Yes
Operating Temperature 10-50°C
Dimensions (L x D x H)
MPC-12/12C 19" x 7.5" x 3.5"
MPC-BP 1" x 4" x 3.4"
Weight
MPC-12 7.8 lbs
MPC-BP 0.4 lbs
Specifications
Ordering Information
MPC-12 12 Slot Universal Mini-Mod Chassis and Power Supply
MPC-12C 12 Slot Universal Mini-Mod Chassis Only
MPC-BP Universal Chassis Blank Plate
MPC-PSF12/16 Universal Power Supply
MPC-12
MPC-BP
MPC-PSF12/16
Mini-Modulators, Mini-Demodulators & Chassis
Loading...