Telephone: Nationwide: Fax: E-mail: Internet:
06/08
Opticomm OTS-1SD & OTS-3SD Fiber Optic Link
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
969 Horsham Road
Horsham, Pennsylvania 19044 USA
Optiva OTS-1SD 1 SDI Fiber Optic Link
& OTS-3SD 3 SDI Fiber Optic Link
OTS-1SD SDI Fiber Optic Transmitters & SDI Fiber Optic Receivers
Optiva Standard, 1 SDI
The OTS-1SD fiber optic link consists of a standard
definition SDI optical transmitter and receiver card
which fit any of the Optiva chassis. These units provide for the transmission of one uncompressed SDI
video (SMPTE-259) on a single fiber up to a distance
of 60 km.
Features
Uncompressed SDI Video over one fiber
TDM - Single Wavelength
Complies with SMPTE 259 for uncompressed SDI
Compatible with MDM-7000 Series for WDM and
CWDM multiplexing
No EMI or RFI and no ground loops
Stand alone or rack-mount
Ideal for Broadcast/Studio and Professional AV applications
Versions Available
Wavelength (nm) Transmit* Receive* Optical Connector Optical Range** Form Factor
& Fiber Budget (dB) (km)
1310 Multimode OTS-1SDT-A1-XX-IC OTS-1SDR-A1-XX-IC ST, FC, LC or SC 10 3 IC (1-slot)
1310 Singlemode OTS-1SDT-A2-XX-IC OTS-1SDR-A2-XX-IC ST, FC, LC or SC 7 10 IC (1-slot)
1310 Singlemode (D) OTS-1SDT-A2D-XX-IC OTS-1SDR-A2D-XX-IC ST, FC, LC or SC 12 20 IC (1-slot)
1550 Singlemode OTS-1SDT-A3-XX-IC OTS-1SDR-A3-XX-IC ST, FC, LC or SC 17 40 IC (1-slot)
1550 Singlemode (D) OTS-1SDT-A3D-XX-IC OTS-1SDR-A3D-XX-IC ST, FC, LC or SC 25 60 IC (1-slot)
1270-1610 SM
(CWDM) OTS-1SDT-A4-XX-IC OTS-1SDR-A4-XX-IC ST, FC, LC or SC Varies 20-70 IC (1-slot)
NON-OPTICAL VERSION OTS-1SDT-NOC-IC OTS-1SDR-NOC-IC N/A N/A N/A IC (1-slot)
*XX indicates the type of optical connector. Each of ST, FC, LC or SC are available.
**Chromatic dispersion and additional losses should be taken into account.
Video
Standard: SMPTE 259
Pathological Test Code: RP-178
Nominal Bit Rate: 270 Mbps
Bit Error Rate: 10
-14
Connector: BNC (IEC 60169-8)
Local Monitoring: LED Status Indication
Remote Monitoring: Compatible with OptivaView™
SNMP Management Suite
General
Dimensions & Weight: Insert Card (IC)
6.3”L x 0.8” W x 4.0” H 11 oz
Operating Temperature: -20° C to +55°C
Storage Temperature: -40° C to +85° C
Humidity: 0 to 95% non-condensing
Operating Voltage: 9-12 VDC
Consumption: 1 Amp Max per Insert Card
System Latency: Less than 1ms
Technical Specifications
©Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Telephone: Nationwide: Fax: E-mail: Internet:
Opticomm OTS-1SD & OTS-3SD Fiber Optic Link
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
OTS-3SD
SDI Fiber Optic Transmitters & SDI Fiber Optic Receivers
Optiva Standard, 3 SDI
The OTS-3SD fiber optic link consists of standard
definition SDI optical transmitter and receiver card
which fit any of the Optiva chassis. These units provide for the transmission of three uncompressed SDI
video (SMPTE-259) on a single fiber up to a distance
of 60 km.
Features
Uncompressed SDI Video over one fiber
TDM - Single Wavelength
Complies with SMPTE 259 for uncompressed SDI
Compatible with MDM-7000 Series for WDM and
CWDM multiplexing
No EMI or RFI and no ground loops
Stand alone or rack-mount
Ideal for Broadcast/Studio and Professional AV applications
Technical Specifications
Video
Standard: SMPTE 259
Pathological Test Code: RP-178
Nominal Bit Rate: 270 Mbps
Bit Error Rate: 10
-14
Connector: BNC (IEC 60169-8)
Local Monitoring: LED Status Indication
Remote Monitoring: Compatible with OptivaView™
SNMP Management Suite
General
Dimensions & Weight: Insert Card (IC)
6.3”L x 0.8” W x 4.0” H 11 oz
Operating Temperature: -20° C to +55°C
Storage Temperature: -40° C to +85° C
Humidity: 0 to 95% non-condensing
Operating Voltage: 9-12 VDC
Consumption: 1 Amp Max per Insert Card
System Latency: Less than 1ms
Versions Available
Wavelength (nm) Transmit* Receive* Optical Connector Optical Range** Form Factor
& Fiber Budget (dB) (km)
1310 Multimode OTS-3SDT-A1-XX-IC OTS-3SDR-A1-XX-IC ST, FC, LC or SC 10 3 IC (1-slot)
1310 Singlemode OTS-3SDT-A2-XX-IC OTS-3SDR-A2-XX-IC ST, FC, LC or SC 7 10 IC (1-slot)
1310 Singlemode (D) OTS-3SDT-A2D-XX-IC OTS-3SDR-A2D-XX-IC ST, FC, LC or SC 12 20 IC (1-slot)
1550 Singlemode OTS-3SDT-A3-XX-IC OTS-3SDR-A3-XX-IC ST, FC, LC or SC 17 40 IC (1-slot)
1550 Singlemode (D) OTS-3SDT-A3D-XX-IC OTS-3SDR-A3D-XX-IC ST, FC, LC or SC 25 60 IC (1-slot)
1270-1610 SM (CWDM) OTS-3SDT-L4-XX-IC OTS-3SDR-A4-XX-IC ST, FC, LC or SC Varies 20-70 IC (1-slot)
NON-OPTICAL VERSION OTS-3SDT-NOC-IC OTS-3SDR-NOC-IC N/A N/A N/A IC (1-slot)
*XX indicates the type of optical connector. Each of ST, FC, LC or SC are available.
**Chromatic dispersion and additional losses should be taken into account.
Loading...