Telephone: Nationwide: Fax: E-mail: Internet:
06/08
Opticomm OTS-1HD & OTS-1HD2DA Fiber Optic Link
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
969 Horsham Road
Horsham, Pennsylvania 19044 USA
Optiva OTS-1HD HD-SDI Fiber Optic Link
& OTS-1HD2DA Fiber Optic Link
OTS-1HD HD-SDI Fiber Optic Transmitters & HD-SDI Fiber Optic Receivers
1HD-SDI 270/1485 Mbps w/Loopback
The OTS-1HD fiber optic link consists of a High
Definition SDI optical transmitter and receiver card
which fits any of the Optiva chassis. These units
provide for the transmission of one uncompressed
HD-SDI video (SMPTE-292) on a single fiber up to a
distance of 60 km.
Features
Uncompressed HD-SDI Video Over One Fiber
TDM - Single Wavelength
Complies with SMPTE Standards for Video
Transmission
Compatible with MDM-7000 Series for WDM and
CWDM Multiplexing
No EMI or RFI and No Ground Loops
Stand Alone or Rack-Mount
Ideal for Broadcast/Studio and Professional AV Applications
Versions Available
Wavelength (nm) Transmit* Receive* Optical Connector Optical Range** Form Factor
& Fiber Budget (dB) (km)
1310 Multimode OTS-1HDT-B1-XX-IC OTS-1HDR-B1-XX-IC ST, FC, LC or SC 10 1.5 IC (1-slot)
1310 Singlemode OTS-1HDT-B1-XX-IC OTS-1HDR-B1-XX-IC ST, FC, LC or SC 7 10 IC (1-slot)
1310 Singlemode (D) OTS-1HDT-B2D-XX-IC OTS-1HDR-B2D-XX-IC ST, FC, LC or SC 12 20 IC (1-slot)
1550 Singlemode OTS-1HDT-B3-XX-IC OTS-1HDR-B3-XX-IC ST, FC, LC or SC 17 40 IC (1-slot)
1550 Singlemode (D) OTS-1HDT-B3D-XX-IC OTS-1HDR-B3D-XX-IC ST, FC, LC or SC 25 60 IC (1-slot)
1270-1610 SM
(CWDM) OTS-1HDT-L4-XX-IC OTS-1HDR-L4-XX-IC ST, FC, LC or SC Varies 20-70 IC (1-slot)
NON-OPTICAL VERSION OTS-1HDT-NOC-IC OTS-1HDR-NOC-IC N/A N/A N/A IC (1-slot)
*XX indicates the type of optical connector. Each of ST, FC, LC or SC are available.
**Chromatic dispersion and additional losses should be taken into account.
Video
Standard: SMPTE 292 & 259
Pathological Test Code: RP-178
Nominal Bit Rate: 1.485 Gbps; 270 Mbps
Bit Error Rate: 10
-14
Connector: BNC (IEC 60169-8 Gold Plated)
Local Monitoring: LED Status Indication
Remote Monitoring: Compatible with OptivaView™
SNMP Management Suite
General
Dimensions & Weight: Insert Card (IC)
6.3”L x 0.8” W x 4.0” H 11 oz
Operating Temperature: -20° C to +55°C
Storage Temperature: -40° C to +85° C
Humidity: 0 to 95% non-condensing
Operating Voltage: 9-12 VDC
Consumption: 1 Amp Max per Insert Card
System Latency: Less than 1ms
Technical Specifications
©Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Telephone: Nationwide: Fax: E-mail: Internet:
Opticomm OTS-1HD & OTS-1HD2DA Fiber Optic Link
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
OTS-1HD2DA
HD-SDI Fiber Optic Transmitters & HD-SDI Fiber Optic Receivers
1HD-SDI 270/1485 Mbps w/Loopback
The OTS-1HD2DA fiber optic link consists of High
Definition SDI optical transmitter and receiver card
which fit any of the Optiva chassis. These units provide for the transmission of one uncompressed HDSDI video (SMPTE-292) and 2 channels stereo digital audio (AES/EBU) on a single fiber up to a distance of 60 km.
Features
Uncompressed HD-SDI Video and 2 AES/EBU
channels over one fiber
TDM - Single Wavelength
Complies with SMPTE 292 for uncompressed HD-
SDI
Compatible with MDM-7000 Series for WDM and
CWDM multiplexing
No EMI or RFI and no ground loops
Stand alone or rack-mount
Ideal for Broadcast/Studio and Professional AV applications
Versions Available
Wavelength (nm) Transmit* Receive* Optical Connector Optical Range** Form Factor
& Fiber Budget (dB) (km)
1310 Multimode
OTS-1HDT2DAT-B1-XX-IC OTS-1HDR2DAR-B1-XX-IC
ST, FC, LC or SC 10 1.5 IC (1-slot)
1310 Singlemode
OTS-1HDT2DAT-B1-XX-IC OTS-1HDR2DAR-B1-XX-IC ST, FC, LC or SC 7 10 IC (1-slot)
1310 Singlemode (D) OTS-1HDT2DAT-B2D-XX-IC OTS-1HDR2DAR-B2D-XX-IC ST, FC, LC or SC 12 20 IC (1-slot)
1310 Singlemode (DFB) OTS-1HDT2DAT-B3-XX-IC OTS-1HDR2DAR-B3-XX-IC ST, FC, LC or SC 17 40 IC (1-slot)
1550 Singlemode
(DFB) OTS-1HDT2DAT-B3D-XX-IC OTS-1HDR2DAR-B3D-XX-IC ST, FC, LC or SC 25 60 IC (1-slot)
1270-1610 SM (CWDM) OTS-1HDT2DAT-L4-XX-IC OTS-1HDR2DAR-L4-XX-IC ST, FC, LC or SC Varies 20-70 IC (1-slot)
NON-OPTICAL VERSION OTS-1HDT2DAT-NOC-IC OTS-1HDR2DAR-NOC-IC N/A N/A N/A IC (1-slot)
*XX indicates the type of optical connector. Each of ST, FC, LC or SC are available.
**Chromatic dispersion and additional losses should be taken into account.
Video
Standard: SMPTE 292 & 259
Pathological Test Code: RP-178
Nominal Bit Rate: 1.485 Gbps; 270 Mbps
Bit Error Rate: 10
-14
Connector: BNC (IEC 60169-8 Gold Plated)
Audio
Digital Format: AES/EBU
AES3-1992 (ANSI S4, 40)
SMPTE 276M
Connector: Micro DB25
Local Monitoring: LED Status Indication
Remote Monitoring: Compatible with OptivaView™
SNMP Management Suite
General
Dimensions & Weight: Insert Card (IC)
6.3”L x 0.8” W x 4.0” H 11 oz
Operating Temperature: -20° C to +55°C
Storage Temperature: -40° C to +85° C
Humidity: 0 to 95% non-condensing
Operating Voltage: 9-12 VDC
Consumption: 1 Amp Max per Insert Card
System Latency: Less than 1ms
Technical Specifications
Loading...