Toner Cable OTPN-400C User Manual

OTPN-400C / OTPN-800C-H/L

PremiseNode Optical Node Receivers

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

The Olson PremiseNode OTPN-400C Optical Node is a low-cost, compact, indoor
CATV receive-only node in a new cast housing. It is designed with the latest optical
receiver technology to reliably deliver a full slate of multiplexed video, data, and tele­phony services in an HFC (hybrid fiber/coax) or PON (passive optical network) broad­band CATV environment.

The Model OTPN-400C is ideal for direct fiber transmission of CATV RF signals in
FTTH, FTTx, MDU, corporate, government, educational, and other applications where
a high performance, compact indoor node is required. the unit is constructed with
high quality components to enable it to meet its performance specifications over a
wide temperature range in an uncontrolled environment, but it does require protection
from the elements. It is designed for desktop, shelf or wall-mounting.

The Model OTPN-400C offers good optical sensitivity, high RF output level, optical
indoor power DC test point and optical level LED indicator. The unit includes a provi­sion for flexible powering of the node, either locally through the DC Power IN “+12V

DC

”

port, or remotely up the coax drop through the “RF OUT/+12V

DC

” port via an optional

Power Inserting Coupler (PIC).

The Model OTPN-400C is the perfect companion to the Olson Technology, Inc.
LaserLite and LaserPlus forward transmitter product families. It is also designed to
mate with 1310nm, 1550nm, CWDM and DWDM optical transmitters from most lead­ing manufacturers.

Entry level member of the Olson
Technology’s PremiseNode family
offers high sensitivity, no frills, and
low cost.

• Receive only indoor optical node for
fiber-deep FTTX/PON CATV applica­tions.

• Wide optical input window of 0 to -8dBm
at 1310/1550nm.

• High RF output range: +28dBmV @ ­1dBm optical input and +14dBmV@-8
dBm optical input.

• Full forward path bandwidth of 40­1,000MHz with low noise and distortion.

• Calibrated DC test point for optical input
power (1V/mW).

• Tri-colored LED indicates optimal input
range and power on.

• +12 V

DC

for local or remote “up-the-coax”
powering via a Power Inserter Coupler
(PIC).

• 6kV surge tolerant RF output and SMT
construction for consistency, reliability,
and performance.

• Low power consumption.

• New compact, light-weight, rugged cast
aluminum housing for easy installation.

OTPN-400C PremiseNode Receive Only Optical Node

Specifications Subject To Change Without Notice Rev 05-11 ©Toner Cable Equipment, Inc.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

OTPN-400C / OTPN-800C-H/L

PremiseNode Optical Node Receivers

• Mid-Level member of the OT PremiseNode
family: Cost-Effective, Full-Featured, Field­Upgradable

• Choice of two (2) RF Output Levels (“H” @
+38dBmV -or- “L” @ +28dBmV) @ -1dBm
optical input

• “H” Version: incorporates internal Plug-in
Equalizer for Slope control; 6dB @
1,000MHz standard

• “H” Version: utilizes RF Output Level
adjustment via internal user-adjustable
variable attenuator.

• This version provides the full output level
of +38dBmV at any optical input level from

-8dBm to +2dBm.

• “L” Version: No Slope or RF Output Level
controls (i.e. Slope = 0dB and RF Out
varies with Optical Input)

• Wide Optical Input Window (+2dBm to ­8dBm) @ 1310/1550nm

• Full CATV Forward Path Bandwidth to
1,000MHz (Analog and QAM Digital)

• DFB or CWDM return laser transmitter
options for Two-Way DOCSIS operation

• Calibrated Power Meter (1V/mW) Optical
Input power test point

• Forward and Return external RF test
points (-20dB)

• Status LED’s for optimal Optical Input and
Output power ranges and unit Power-On
indication

• +12V

DC

Local Direct or Remote Drop ­*Coax powering via Optional Power
Inserter

• Low Power Consumption (Rx @ 6 Watts;
Rx/Tx @ 7 Watts)

• > 6kV surge tolerant RF output and SMT
construction for consistency, reliability &
performance

• Compact (3"x 7"x 2.1"), Lightweight and
Rugged cast aluminum housing for Easy
Installation

• Power supply (+12V/1.25A) and “F”

Connector Adapter included.

The Olson Technology, Inc. OTPN-800C-H/L PremiseNode is a compact, cost-effec­tive, full-featured indoor CATV node designed using the very latest optical receiver
technology to reliably deliver a full slate of multiplexed video, high speed data and
telephony services in an HFC or PON broadband CATV environment.

The unit is ideally suited for direct fiber transmission of CATV RF signals in FTTH,
FTTX, MDU, industrial, corporate, government, educational, I-Net or traditional HFC
applications where a high performance, compact indoor node is required. The unit is
constructed with high quality components to enable it to meet or exceed its perfor­mance specifications over a wide temperature range in an uncontrolled environment,
but it does require protection from the elements. It is configured for desktop, shelf or
wall-mounting.

The base Model OTPN-800C-H/L is a low-profile, rugged stand-alone optical receiver
with: wide ranging and exceptional optical sensitivity; excellent CNR/CSO/CTB perfor­mance; choice of two (2) RF output levels, and; external RF and optical connections,
test points (optical and RF) & LED status indicators. This node also features a factory­installed or field-installable DFB or CWDM return laser option, resulting in a highly­integrated, small footprint, DOCSIS-compliant two-way node.

The OTPN-800C-H/L also features a provision for flexible powering of the node, either
locally through the DC Power IN “+12V

DC

” port, or remotely up the coax drop through

the “RF OUT/+12V

DC

” port via an optional Power Inserting Coupler (PIC). A universal
wall-mount power supply (+12V/1.25A Wall-Mount AC/DC Power Supply and “F”
Connector Adapter) is provided with each unit. SC/APC optical connector is standard.
FC/APC optical connectors are optional.

The OTPN-800C-H/L is the perfect companion to the Olson Technology, Inc. LaserLite
(Models OTOT-870C-x & OTOR-300) and LaserPlus (Models LP-OT-x and LP-OR)
forward transmitter and return receiver product families, but is also designed to mate
with 1310nm and 1550nm optical transmitters and return receivers from most leading
manufacturers.

OTPN-800C-H/L Customer Premises HFC/PON Optical Node/Receiver

with Optional Return Transmitter