Toner Cable MIRC-4CUBE-CH User Manual

Modular Headend System

Rack Chassis and Power Supply

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

Ordering Information

Model Stock # Description

MIRC-4D 7711 HE-4 Series Rack Chassis & Power Supply 19” Rack Mount
MIRC-12V 7715 HE-12 Series Vented Rack Chassis 19” Rack Mountable 2 RU Chassis for 12 Modular Units
MIPS-12C 7722C HE-12 Series Power Supply 5.5 A on 5 VDC line, 4 A on 12 VDC line
MIRC-4CUBE-CH 7703 4 Slot Vertical Chassis Supports combinations of up to 4 MICM, AMCM or MIDM units
MIRC-4CUBE-PS 7702 4 Slot Vertical Chassis Power Supply Unit

Accessories
Model Stock No. Description

MIBP-1 7787 Blank Panel Insert Single Modular Panel compatible with HE-12 / MIRC-12 Chassis
MIBP-2 7788 Blank Panel Insert Dual Modular Panel compatible with HE-12 / MIRC-12 Chassis
MHF 7782 Modular Series Headend Fan

The MIRC-4CUBE is extremely well suited for use
in surveillance or security type applicatoins. A
video camera’s baseband video output can be
modulated to any cable television channel and
combined with existing TV signals to permit any
outlet to monitor the camera feeds. This compact
chassis can support up to 4 fixed channel or agile
modulators and can be mounted in pratically any
location. The use of Blonder Tongue high perfor­mance modulators easily permits placing camera
signals on adjacent channels.

Specifications

General

Power Requirements: 100 VAC to 240 VAC, ±10%
Frequency: 50 to 60 Hz
Temperature Range: 0° to +50° C
Output: +5 VDC @ 5.5 Amps, +12 VDC @4 A, 75 W

Mechanical

Dimensions (WxHxD) : 4.16” x 3.5” x 7.50”
Weight: 1.10 lbs (0.50 kg)

Connectors

AC In put: IEC
DC Output: 37 pin D

Indicators

Power: LED, Green

Accessories Supplied

AC Power Cable: 6 Ft, IEC, USA

Specifications

General

Power Requirements: 100 VAC to 240 VAC
Frequency: 50 to 60 Hz
Temperature Range: 0° to +50°C
Output Voltage & Current Capacity:

+12 VDC @ 1.8 Amps

+5 VDC @ 1.8 Amps

MIRC-4D 4 Slot Vertical Chassis

MIRC-12V 12 Slot Horizontal Chassis

MIRC-4 CUBE

MIPS-12C Power Supply

MHF Headend Fan

Specifications Subject To Change Without Notice Rev 04-11 ©Toner Cable Equipment, Inc.

969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: [phone] Fax: [phone] [e-mail]

MIDM

Analog Agile Demodulator

The MIDM is a professional quality agile
audio/video demodulator and is intended
for both CATV and VHF & UHF analog
applications. The unit is in a “single
width” Die-Cast housing that allows
deployment of up to 12 demodulator
units in a MIRC-12 chassis.

The MIDM demodulates standard CATV,
IRC and HRC channels and is capable
for “Cherry Picking” of CATV channels in
preparation for remodulation. The input
frequency range is agile, allowing selec­tion of any CATV channel from 54 to 806
MHz. Baseband audio and video are
provided as outputs. It is ideal for off-air
signal processing (audio/video process­ing and remodulation) applications.
Baseband audio and video are provided
as ouptuts. The MIDM features rock
solid, phase lock loop (PLL) synthesized
frequency control. Agile frequency
selection is accomplished via front panel
channel up/down buttons with a LED
channel readout for easy on-the-fly
channel changes. A channel lockout
mode is also provided to prevent acci­dental channel changes. Non-volatile
memory maintains the programmed
channel selection in case of power loss.
The MIDM is compatible with any modu­lators requiring a baseband input, and
can be used in any combination with the
MIPS-12C power supply in a MIRC-12
chassis.

Features

¬ Die-Cast Chassis Offers Superior Protection Against Ingress or Egress
¬ Demodulates Any Channel 54-806 MHz
¬ LED Display Makes Agile Channel Selection Easy
¬ Compatible with MICM-45 Modulator for Compact Off-Channel Processor

Solution

Specifications

Ordering Information

Model Stock No. Description

MIDM-806C 7740C HE-12 Series Agile Audio/Video Demodulator 54-806 MHz UHF/VHF/CATV Input

(STD, HRC, IRC)

RF

Frequency Range: 54-806 MHz

VHF, UHF, CATV

(Std., IRC, HRC)

Input Level Range: -5 to +30 dBm VHF/UHF,

+2 to +12 dBmV (CATV)
Noise Figure: 8 dB
Image Rejection: VHF 60 dB
Input Impedance: 75 Ω

Video

Output Level: 1.0 V p-p
Output Impedance: 75 Ω

Audio

Output Level: 1 Vp-p
Output Impedance: 600 Ω, Unbalanced

General

Power Requirements - External:

12 VDC @ 140 mA

5 VDC @ 150 mA

Temperature Range: 0° to +50° C

Mechanical

Dimensions (WxHxD): 1.0 x 3.5 x 7.50 in

29 x 89 x 191 mm

Weight: 1.2 lbs (0.56 kg)

Connectors/Impedance

Audio Output: RCA Phono, Female
Video Output: 75 Ω “F” Type, Female
RF Input: 75 Ω “F” Type, Female
Power: Locking Header, 3 Pin

Controls

Channel Selection: Push Buttons
ANT/CATV: Push Button
Power On/OFF: Push Button
Channel Lock: Push Button
Audio Level: Control
Video Level: Control

Indicators

Channel: 2 Digit, 7 Segment LED