Toner Cable MICM-45D User Manual

MICM Series
Micro Channel Modulator
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
MICM-45D: Is available in NTSC channels 2-79 and 95-99 (54-550 MHz). This 5th generation of the MICM series, equipped with the CALMTones feature, utilizes an Audio AGC (Automatic Gain Control) solution that eliminates variations in loudness level that may be present among various program sources.
MICM-45DS: Is the same as MICM-45D but with stereo audio output.
Features
• Prohibits commercials that accompany broadcast programs from:
(i) having modulation levels substantially higher than the broadcast program; and
(ii) having an average maximum loudness substantially higher than that of the broadcast program.
• Provides consistent audio level among all broadcast programs on different channels and among different programs within the same channel
• Compact design allows for deployment of 12 channels in 2RU
• Utilizes SAW filters for improved performance
• Die-cast chassis for RFI immunity
• Integrated Stereo encoder
Ordering Information
Model Stock # Description
MICM-45D 7797D Fixed-channel Audio/Video Modulator, Audio AGC, +45 dBmV, 54-550 MHz MICM-45DS 7797DS Fixed-channel Audio/Video Modulator, Audio AGC, Stereo, +45 dBmV,
54-550 MHz MIRC-12V 7715 Rack Chassis (holds up to 12 modulators) MIPS-12C 7722C 100-240 VAC; 50/60 Hz power supply (one per chassis)
Specifications Subject To Change Without Notice Rev 04-11 ©Toner Cable Equipment, Inc.
969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 linfo@tonercable.com
MICM Series
Micro Channel Modulator
Specifications
Video Connector: “F” Female Impedance: 75 Ω Return Loss: 20 dB Input Level: 1.0 volt Peak-to-Peak (87.5% depth of modulation) Frequency Response: 1.0 dB Peak-to-Valley (fv to fv+4.2 MHz) Peak to Peak Video-to-RMS Hum Ratio: 64 dB Signal-to-Noise Ratio: 65 dB (Weighted; 4 MHz bandwidth) Differential Gain: 2.0% (87.5% depth of modulation) Differential Phase: 2.0 degree (87.5% depth of modulation)
Chrominance/Luminance Delay: Per FCC Requirements
Mono Audio (standard) Connector: RCA Input Impedance: Greater than 10 kΩ, unbalanced Input Level: (for 25 kHz deviation) 0.5 to 4.0 volt peak-to-peak (constant AGC range) Frequency Range: 50 Hz to 12 kHz Frequency Response: ± 0.5 dB Total Harmonic Distortion: 1% @ 25 kHz deviation Signal-to-Noise Ratio: 70 dB Stereo Audio (optional) Connector: RCA Input Impedance: Greater than 10 kΩ, unbalanced Input Sensitivity: 0.5 to 4.0 volt peak-to-peak (for 55 kHz peak deviation) (AGC Range with pilot tone) Frequency Response: +/-0.75 dB (50 Hz to 12 kHz) Separation: 20 dB @ 50 Hz to 10 kHz
Connector: “F” Female Impedance: 75 Ω Return Loss: 15 dB Frequency Range: 54 to 550 MHz (NTSC CATV Ch. 2 -79 and
95-99)
Power Level: +45 dBmV Power Level Range: 10 dB continuously adjustable Carrier-to-Noise:(In Channel) 63 dB Broadband Noise: -90 dBc (@ +45 dBmV output level, 4 MHz band.) Spurious Outputs: -66 dBc Aural/Visual Carrier Ratio: -11 to -19 dB continuously adjustable
4.5 MHz Aural Inter-carrier Frequency Tolerance: ±250 Hz; 32 to 122 °F (0 to 50 °C) Visual Carrier Frequency
Tolerance Standard Channels: ±10 kHz; 32 to 122 °F (0 to 50 °C)
FCC Aeronautical Channels: ±5 kHz; 32 to 122 °F (0 to 50 °C)
Front-Panel Indicators
Power: Green LED
Stereo: Red LED (when equipped)
Front-Panel Control
Output Level : Potentiometer
Video Level: Potentiometer
Audio Level: Potentiometer
Aural Carrier Level: Potentiometer
INPUT OUTPUT Modes 1 & 2
ALARMS / MONITORING / CONTROL
Dimensions (W x D x H)
MICM Modules: 1.0 x 7.78 x 3.5 inches (25 x 198 x 89 mm)
MIPS-12C Power Supply: 4.6 x 7.5 x 3.5 inches (106 x 191 x 89 mm)
MIRC-12V Chassis: 19 x 12.0 x 5.25 inches (483 x 305 x 133 mm)
Power
MIPS-12C Power Supply: 100-240 VAC; 50/60 Hz
Power Dissipation: ~ 3 W (per MICM Module) Weight
MICM Module: 0.65 lbs (0.3 kg)
Fully Loaded Chassis: 18.2 lbs (8.3 kg) Operating Temperature: 32 to 122 °F (0 to 50 °C) Storage Temperature: -13 to 158 °F (-25 to 70 °C) Operating Humidity: 0 to 95% RH @ 35 °C max, non-condensing Storage Humidity: 0 to 95% RH @ 35 °C max, non-condensing
GENERAL
Loading...