Toner Cable LSx 2150A User Manual
Telephone: Nationwide: Fax: E-mail: Internet:
06/01
QUINTECH SRM 2150 and SRF 1000
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
969 Horsham Road
Horsham, Pennsylvania 19044 USA
SRM 22150
L-BAND (950-2150 MHZ
) MODULAR
MATRIX S
WITCHING SYSTEM
US PATENTS
4,935,709 & 5,481,073
Q-Switch®SRM 2150/16x16
GENERAL DESCRIPTION:
The base SRM 2150/(16X16) matrix switch includes front
panel keypad controller, LCD display, RS-232 interface
and all of the splitter, amplifier, switching, control and PSU
modules required to switch any one of 16 broadband
coaxial inputs into any one or more of the 16 outputs. The
operation can be configured in software converting a
(16X16) to 4 (8X8), or 8 (4X4). The system can be
expanded to (128X128), with local and/or remote control,
monitoring and polling functions as required.
P RODUCT S PECIFICATIONS:
Input/Output Ports: 16X16 up to 128x128
Operating Frequency Range: 950-2150 MHz
Impedance (Input/Output): 75 Ω
VSWR (Input/Output): 2.0:1
Nominal Gain: 0 ± 2.0 dB max
Gain Flatness: ± 3 dB max.
Isolation Input/Input: 60 dB typ. (45 dB min.)
Isolation Output/Output: 60 dB typ. (45 dB min.)
Isolation Input/Output: 55 dB typ. (40 dB min.)
RF Connectors (Input & Output): Type "F", 75 Ω
Power Required: 100/240 VAC, 50/60 Hz
(Specify 120 or 220 VAC)
Dual AC inputs and dual
internal PSU’s provided
for redundancy.
Mechanical: RU (5.25" H x 19.0" W x 20.0" D)
Control:
Local: Front panel Keypad
Remote: RS-232
SRF 1000
ULTRA B
ROADBAND
RF SWITCH
US PATENTS
4,935,709 & 5,481,073
Q-Switch®SRF 1000/1x8
G
ENERAL DESCRIPTION:
Quintech’s SRF series switches offers a high performance yet cost effective solution to the growing need
for switching in an environment of rapidly expanding
channel capacity and frequency spectrum. Equally
suitable for cable, RF and Data applications, SRF
switches are bi-directional and easily configured for
both simple and complex networks. Signal routing can
be controlled directly by 12 VDC applied via D-9 connector. Custom integrated subsystems with any customer specified input/output configuration are available.
P RODUCT S PECIFICATIONS:
Insertion Loss
@ DC-550 MHz 0.3 dB
@ DC-850 MHz 0.5 dB
@ DC-1450 MHz 0.8 dB
@ DC-1750 MHz 1.8 dB
@ DC-2300 MHz 2.0 dB
Isolation
@ DC-550 MHz 60 dB
@ DC-850 MHz 50 dB
@ DC-1450 MHz 40 dB
@ DC-1750 MHz 35 dB
@ DC-2300 MHz 30 dB
Return Loss
@ DC-550 MHz 17 dB
@ DC-850MHz 14 dB
@ DC-1450 MHz 12 dB
@ DC-1750 MHz 11 dB
@ DC-2300 MHz 10 dB
Connectors: Type "F", 75 Ω
Control: 12 VDC via D-9 (male)
Switch Life: 10,000,000 operations @ 50 cycles/hour
L-Band
Matrix Switch SRM 2150
Routing Switch SRF 1000
Power Supplies RPS Series
Dividers/Splitters LSx 2150A
Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Telephone: Nationwide: Fax: E-mail: Internet:
QUINTECH SRM 2150 and SRF 1000
215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com
RPS SERIES
REDUNDANT POWER
SUPPLIES
RPS 24/4.8
GENERAL DESCRIPTION:
The RPS Series Redundant Power Supply is
designed to power as many as sixteen (16) LNA's,
LNB's, Up converters, Down converters, Line
Amplifiers or Laser Transmitters. The unit is comprised of two separately fused power supplies
connected together to provide instantaneous
redundancy should one of the supplies fail.
The two power supply modules are on individual
drawers to provide easy replacement of a failed
module. Afailed module can be replaced with the
RPS Series Redundant Power Supply in operation. (Hot-Swapping for Zero Downtime).
P
RODUCT S PECIFICATIONS:
RPS F Series
Output Voltage: +18 VDC or +24 VDC (customer specified)
Maximum Current: 18 VDC @ 3.6 A
24 VDC @ 4.8 A
Operating Frequency: 270 - 2150 MHz
Insertion Loss: 1 ± 0.5 dB max.
Flatness: ± 1.0 dB max.
Return Loss: 14 dB nom.
Input Connectors: Type "F", 75 Ω
Output Connectors: Type "F", 75 Ω
Power Required: 120 VAC, 60 Hz
Mechanical: 3 RU (5.25” H X 19.0” W X
20.0” D)
RPS B Series
Output Connectors: 16 pairs of binding posts (Red & Black)
(with individually fused outputs)
LSX 2150A
A
CTIVE L-BAND (950-2150MHZ)
P
OWER DIVIDER/SPLITTERS
GENERAL DESCRIPTION:
Operating over the 950-2150 MHz frequency
range, the LSx 2150A series of active Lband splitters may be used in any headend
installation using this frequency plan. They
permit simple splitting of either the vertical or
horizontal signals into multiple branches.
These commercial quality power splitters
meet strict level, match and loss specifications achieved through the use of Quintech’s
proprietary microstrip and SMT technology.
LS 16 2150A
P RODUCT A VALABLE:
LS4 2150A (1x4)
LS8 2150A (1x8)
LS16 2150A (1x16)
LS32 2150A (1x32)
LS48 2150A (1x48)
A
VAILABLE C ONFIGURATIONS:
4, 8, 16, 32, and 48-way configurations. Some models
are also available in dual, quad and custom designs.
O PTIONS:
Redundancy. BNC or SMAConnectors.
C
OMPLEMENTARY P RODUCTS:
RPS Series Redundant Power Supplies
Loading...