Toa VR-1001B User Manual

The VR-1001B is a unidirectional paging microphone designed for use with the V-1000 series Mixer power
amplifier. It is equipped with a Push-to-talk (PTT) key, Speech and Chime indicators, and an output cable with
two 5-pin DIN plugs. When the VR-1001B is connected to a chime module, pressing the PTT key causes a
chime to sound (Chime indicator lights), then the microphone to turn on (Speech indicator lights).

VR-1001BPAGING MICROPHONE

INSTRUCTION MANUAL

3. CIRCUIT DIAGRAM

2. APPEARANCE

533-05-016-10

URL: http://www.toa.jp/

1. GENERAL DESCRIPTION

Thank you for purchasing TOA's Paging Microphone.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

4. SPECIFICATIONS

Note: The design and specifications are subject to change without notice for improvement.

Type Moving-coil type
Polar Pattern Unidirectional
Impedance 600 Ω, Balanced
Output Level – 58 dB (1 kHz, 0 dB = 1 V/Pa)
Frequency Response 100 Hz to 10 kHz
Switch Push-to-talk key
Indicators Chime indicator : Red (LED)

Speech indicator : Green (LED)

Finish Microphone head : Zinc plated steel wire, gray, paint

Main unit : ABS resin, gray
Dimensions 100 (w) x 215 (h) x 150 (d) mm (3.94" x 8.46" x 5.91")
Weight 440 g (0.97 lb) (cable not included)

Speech indicator

Chime indicator

Push-to-talk key

5-pin DIN plugs

Push to talk.

Shield

Body earth

CHIME

SPEECH

5-pin DIN plug

2

5

4

1

3

2

5

4

3

1